RESUMO
Sclerotherapy is among the least invasive and most commonly utilised treatment options for varicose veins. Nonetheless, it does not cure varicosities permanently and recurrence rates are of up to 64%. Although sclerosing foams have been extensively characterised with respect to their bench-top properties, such as bubble size distribution and half-life, little is known about their flow behaviour within the venous environment during treatment. Additionally, current methods of foam characterisation do not recapitulate the end-point administration conditions, hindering optimisation of therapeutic efficacy. Here, a therapeutically relevant apparatus has been used to obtain a clinically relevant rheological model of sclerosing foams. This model was then correlated with a therapeutically applicable parameter-i.e., the capability of foams to displace blood within a vein. A pipe viscometry apparatus was employed to obtain a rheological model of 1% polidocanol foams across shear rates of 6 s-1 to 400 s-1. Two different foam formulation techniques (double syringe system and Tessari) and three liquid-to-gas ratios (1:3, 1:4 and 1:5) were investigated. A power-law model was employed on the rheological data to obtain the apparent viscosity of foams. In a separate experiment, a finite volume of foam was injected into a PTFE tube to displace a blood surrogate solution (0.2% w/v carboxymethyl cellulose). The displaced blood surrogate was collected, weighed, and correlated with foam's apparent viscosity. Results showed a decreasing displacement efficacy with foam dryness and injection flowrate. Furthermore, an asymptotic model was formulated that may be used to predict the extent of blood displacement for a given foam formulation and volume. The developed model could guide clinicians in their selection of a foam formulation that exhibits the greatest blood displacement efficacy.
Assuntos
Soluções Esclerosantes , Varizes , Humanos , Soluções Esclerosantes/uso terapêutico , Varizes/tratamento farmacológico , Polidocanol , Escleroterapia/métodos , ReologiaRESUMO
Varicose veins are chronic venous defects that affect >20% of the population in developed countries. Among potential treatments, sclerotherapy is one of the most commonly used. It involves endovenous injection of a surfactant solution (or foam) in varicose veins, inducing damage to the endothelial layer and subsequent vessel sclerosis. Treatments have proven to be effective in the short-term, however recurrence is reported at rates of up to 64% 5-year post-treatment. Thus, once diagnosed with varicosities there is a high probability of a permanently reduced quality of life. Recently, foam sclerotherapy has become increasingly popular over its liquid counterpart, since foams can treat larger and longer varicosities more effectively, they can be imaged using ultrasound, and require lower amounts of sclerosing agent. In order to minimize recurrence rates however, an investigation of current treatment methods should lead to more effective and long-lasting effects. The literature is populated with studies aimed at characterizing the fundamental physics of aqueous foams; nevertheless, there is a significant need for appropriate product development platforms. Despite successfully capturing the microstructural evolution of aqueous foams, the complexity of current models renders them inadequate for pharmaceutical development. This review article will focus on the physics of foams and the attempts at optimizing them for sclerotherapy. This takes the form of a discussion of the most recent numerical and experimental models, as well as an overview of clinically relevant parameters. This holistic approach could contribute to better foam characterization methods that patients may eventually derive long term benefit from.
Assuntos
Soluções Esclerosantes/farmacologia , Escleroterapia/métodos , Varizes/terapia , Formas de Dosagem , Humanos , Polidocanol/química , Reologia , Escleroterapia/efeitos adversos , Soluções , ÁguaRESUMO
Foam sclerotherapy is clinically employed to treat varicose veins. It involves intravenous injection of foamed surfactant agents causing endothelial wall damage and vessel shrinkage, leading to subsequent neovascularization. Foam production methods used clinically include manual techniques, such as the Double Syringe System (DSS) and Tessari (TSS) methods. Pre-clinical in-vitro studies are conducted to characterize the performance of sclerosing agents; however, the experimental models used often do not replicate physiologically relevant physical and biological conditions. In this study, physical vein models (PVMs) were developed and employed for the first time to characterize the flow behavior of sclerosing foams. PVMs were fabricated in polydimethylsiloxane (PDMS) by replica molding, and were designed to mimic qualitative geometrical characteristics of veins. Foam behavior was investigated as a function of different physical variables, namely (i) geometry of the vein model (i.e., physiological vs. varicose vein), (ii) foam production technique, and (iii) flow rate of a blood surrogate. The experimental set-up consisted of a PVM positioned on an inclined platform, a syringe pump to control the flow rate of a blood substitute, and a pressure transducer. The static pressure of the blood surrogate at the PVM inlet was measured upon foam administration. The recorded pressure-time curves were analyzed to quantify metrics of foam behavior, with a particular focus on foam expansion and degradation dynamics. Results showed that DSS and TSS foams had similar expansion rate in the physiological PVM, whilst DSS foam had lower expansion rate in the varicose PVM compared to TSS foam. The degradation rate of DSS foam was lower than TSS foam, in both model architectures. Moreover, the background flow rate had a significant effect on foam behavior, enhancing foam displacement rate in both types of PVM.
RESUMO
Since the first reports on foam sclerotherapy, multiple studies have been conducted to determine the physical properties and behavior of foams, but relatively little is known about their biological effects on the endothelial cells lining the vessel wall. Moreover, a systematic comparison of the biological performance of foams produced with different methods has not been carried out yet. Herein, a 2D in vitro method was developed to compare efficacy of commercially available polidocanol injectable foam (PEM, Varithena) and physician-compounded foams (PCFs). Endothelial cell attachment upon treatment with foam was quantified as an indicator of therapeutic efficacy, and was correlated with foam physical characteristics and administration conditions. An ex vivo method was also developed to establish the disruption and permeabilisation of the endothelium caused by sclerosing agents. It relied on the quantitation of extravasated bovine serum albumin conjugated to Evans Blue, as an indicator of endothelial permeability. In our series of comparisons, PEM presented a greater overall efficacy compared to PCFs, across the different biological models, which was attributed to its drainage dynamics and gas formulation. This is consistent with earlier studies that indicated superior physical cohesiveness of PEM compared to PCFs.