Ferromagnetism and nonmetallic transport of thin-film α-FeSi(2): a stabilized metastable material.

A metastable phase α-FeSi_{2} was epitaxially stabilized on a silicon substrate using pulsed laser deposition. Nonmetallic and ferromagnetic behaviors are tailored on α-FeSi_{2} (111) thin films, while the bulk material of α-FeSi_{2} is metallic and nonmagnetic. The transport property of the films renders two different conducting states with a strong crossover at 50 K, which is accompanied by the onset of a ferromagnetic transition as well as a substantial magnetoresistance. These experimental results are discussed in terms of the unusual electronic structure of α-FeSi_{2} obtained within density functional calculations and Boltzmann transport calculations with and without strain. Our finding sheds light on achieving ferromagnetic semiconductors through both their structure and doping tailoring, and provides an example of a tailored material with rich functionalities for both basic research and practical applications.

Anomalous high ionic conductivity of nanoporous ß-Li3PS4.

Lithium-ion-conducting solid electrolytes hold promise for enabling high-energy battery chemistries and circumventing safety issues of conventional lithium batteries. Achieving the combination of high ionic conductivity and a broad electrochemical window in solid electrolytes is a grand challenge for the synthesis of battery materials. Herein we show an enhancement of the room-temperature lithium-ion conductivity by 3 orders of magnitude through the creation of nanostructured Li(3)PS(4). This material has a wide electrochemical window (5 V) and superior chemical stability against lithium metal. The nanoporous structure of Li(3)PS(4) reconciles two vital effects that enhance the ionic conductivity: (1) the reduction of the dimensions to a nanometer-sized framework stabilizes the high-conduction ß phase that occurs at elevated temperatures, and (2) the high surface-to-bulk ratio of nanoporous ß-Li(3)PS(4) promotes surface conduction. Manipulating the ionic conductivity of solid electrolytes has far-reaching implications for materials design and synthesis in a broad range of applications, including batteries, fuel cells, sensors, photovoltaic systems, and so forth.

Correlating cation ordering and voltage fade in a lithium-manganese-rich lithium-ion battery cathode oxide: a joint magnetic susceptibility and TEM study.

Structure-electrochemical property correlation is presented for lithium-manganese-rich layered-layered nickel manganese cobalt oxide (LMR-NMC) having composition Li1.2Co0.1Mn0.55Ni0.15O2 (TODA HE5050) in order to examine the possible reasons for voltage fade during short-to-mid-term electrochemical cycling. The Li1.2Co0.1Mn0.55Ni0.15O2 based cathodes were cycled at two different upper cutoff voltages (UCV), 4.2 V and 4.8 V, for 1, 10, and 125 cycles; voltage fade was observed after 10 and 125 cycles only when the UCV was 4.8 V. Magnetic susceptibility and selected-area electron diffraction data showed the presence of cation ordering in the pristine material, which remained after 125 cycles when the UCV was 4.2 V. When cycled at 4.8 V, the magnetic susceptibility results showed the suppression of cation ordering after one cycle; the cation ordering diminished upon further cycling and was not observed after 125 cycles. Selected-area electron diffraction data from oxides oriented towards the [0001] zone axis revealed a decrease in the intensity of cation-ordering reflections after one cycle and an introduction of spinel-type reflections after 10 cycles at 4.8 V; after 125 cycles, only the spinel-type reflections and the fundamental O3 layered oxide reflections were observed. A significant decrease in the effective magnetic moment of the compound after one cycle at 4.8 V indicated the presence of lithium and/or oxygen vacancies; analysis showed a reduction of Mn(4+) (high spin/low spin) in the pristine oxide to Mn(3+) (low spin) after one cycle. The effective magnetic moment was higher after 10 and 125 cycles at 4.8 V, suggesting the presence of Mn(3+) in a high spin state, which is believed to originate from distorted spinel (Li2Mn2O4) and/or spinel (LiMn2O4) compounds. The increase in effective magnetic moments was not observed when the oxide was cycled at 4.2 V, indicating the stability of the structure under these conditions. This study shows that structural rearrangements in the LMR-NMC oxide happen only at higher potentials (4.8 V, for example) and provides evidence of a direct correlation between cation ordering and voltage fade.

Kinetics of methane hydrate decomposition studied via in situ low temperature X-ray powder diffraction.

Gas hydrate is known to have a slowed decomposition rate at ambient pressure and temperatures below the melting point of ice. As hydrate exothermically decomposes, gas is released and water of the clathrate cages transforms into ice. Based on results from the decomposition of three nominally similar methane hydrate samples, the kinetics of two regions, 180-200 and 230-260 K, within the overall decomposition range 140-260 K, were studied by in situ low temperature X-ray powder diffraction. The kinetic rate constants, k(a), and the reaction mechanisms, n, for ice formation from methane hydrate were determined by the Avrami model within each region, and activation energies, E(a), were determined by the Arrhenius plot. E(a) determined from the data for 180-200 K was 42 kJ/mol and for 230-260 K was 22 kJ/mol. The higher E(a) in the colder temperature range was attributed to a difference in the microstructure of ice between the two regions.

The high intensity diffractometer for residual stress analysis (HIDRA), a third generation residual stress mapping neutron diffractometer at the high flux isotope reactor.

This paper describes the hardware and software upgrades, operation, and performance of the high intensity diffractometer for residual stress analysis (HIDRA) instrument, a residual stress mapping neutron diffractometer located at the High Flux Isotope Reactor at Oak Ridge National Laboratory in Oak Ridge Tennessee, USA. Following a major upgrade in 2018, the new instrument has a single 3He multiwire 2D 30 × 30 cm2 position sensitive detector, yielding a field of view of 17° 2θ. The increase in the field of view (from 4° 2θ) from the previous model instrument has contributed to the tremendous improvement in the out of plane solid angle such that the 3D count rate could be obtained easily. Accordingly, the hardware, software, Data Acquisition System (DAS), and so on have also been updated. Finally, all these enhanced features of HIDRA have been ably demonstrated by conducting multi directional diffraction measurements in the quenched 750-T74 aluminum, and the evolved and improved strain/stress mappings are presented.

Combined in situ XRD and in situ XANES studies on the reduction behavior of a rhenium promoted cobalt catalyst.

A 10% Co-4% Re/(2% Zr/SiO(2)) catalyst was prepared by co-impregnation using a silica support modified by 2% Zr. The catalyst was characterized by temperature programmed reduction (TPR), in situ XRD and in situ XANES analysis where it was simultaneously exposed to H(2) using a temperature programmed ramp. The results showed the two step reduction of large crystalline Co(3)O(4) with CoO as an intermediate. TPR results showed that the reduction of highly dispersed Co(3)O(4) was facilitated by reduced rhenium by a H(2)-spillover mechanism. In situ XRD results showed the presence of both, Co-hcp and Co-fcc phases in the reduced catalyst at 400 °C. However, the Co-hcp phase was more abundant, which is thought to be the more active phase as compared to the Co-fcc phase for CO hydrogenation. CO hydrogenation at 270 °C and 5 bar pressure produces no detectable change in the phases during the time of experiment. In situ XANES results showed a decrease in the metallic cobalt in the presence of H(2)/CO, which can be attributed due to oxidation of the catalyst by reaction under these conditions.

Synthesis of silica supported AuCu nanoparticle catalysts and the effects of pretreatment conditions for the CO oxidation reaction.

Supported gold nanoparticles have generated an immense interest in the field of catalysis due to their extremely high reactivity and selectivity. Recently, alloy nanoparticles of gold have received a lot of attention due to their enhanced catalytic properties. Here we report the synthesis of silica supported AuCu nanoparticles through the conversion of supported Au nanoparticles in a solution of Cu(C(2)H(3)O(2))(2) at 300 °C. The AuCu alloy structure was confirmed through powder XRD (which indicated a weakly ordered alloy phase), XANES, and EXAFS. It was also shown that heating the AuCu/SiO(2) in an O(2) atmosphere segregated the catalyst into a Au-CuO(x) heterostructure between 150 °C to 240 °C. Heating the catalyst in H(2) at 300 °C reduced the CuO(x) back to Cu(0) to reform the AuCu alloy phase. It was found that the AuCu/SiO(2) catalysts were inactive for CO oxidation. However, various pretreatment conditions were required to form a highly active and stable Au-CuO(x)/SiO(2) catalyst to achieve 100% CO conversion below room-temperature. This is explained by the in situ FTIR result, which shows that CO molecules can be chemisorbed and activated only on the Au-CuO(x)/SiO(2) catalyst but not on the AuCu/SiO(2) catalyst.

Mapping of Texture and Phase Fractions in Heterogeneous Stress States during Multiaxial Loading of Biomedical Superelastic NiTi.

Thermoelastic deformation mechanisms in polycrystalline biomedical-grade superelastic NiTi are spatially mapped using in situ neutron diffraction during multiaxial loading and heating. The trigonal R-phase is formed from the cubic phase during cooling to room temperature and subsequently deforms in compression, tension, and torsion. The resulting R-phase variant microstructure from the variant reorientation and detwinning processes are equivalent for the corresponding strain in tension and compression, and the variant microstructure is reversible by isothermal loading. The R-phase variant microstructure is consistent between uniaxial and torsional loading when the principal stress directions of the stress state are considered (for the crystallographic directions observed here). The variant microstructure evolution is tracked and the similarity in general behavior between uniaxial and torsional loading, in spite of the implicit heterogeneous stress state associated with torsional loading, pointed to the ability of the reversible thermoelastic transformation in NiTi to accommodate stress and strain mismatch with deformation. This ability of the R-phase, despite its limited variants, to accommodate stress and strain and satisfy strain incompatibility in addition to the existing internal stresses has significance for reducing irrecoverable deformation mechanisms during loading and cycling through the phase transformation.

Probing orientation information using 3-dimensional reciprocal space volume analysis.

The crystallographic texture of polycrystalline materials is the result of how these materials are processed and what external forces materials have experienced. Neutron and X-ray diffraction are standard methods to characterize global crystallographic textures. However, conventional neutron and X-ray texture analyses rely on pole figure inversion routines derived from intensity analysis of individual reflections or powder Rietveld analysis to reconstruct and model the orientation distribution from slices through reciprocal space. In this work, we describe an original approach to directly probe the crystallographic texture information of rolled aluminum from the intensity distribution in 3-dimensional reciprocal space volumes measured simultaneously. Using the TOPAZ time-of-flight Laue neutron diffractometer, reciprocal space analysis allowed determination of "pole spheres" with <1° angular resolution. These pole spheres are compared with reconstructed pole figures from classic texture analysis.

Designing Trials of Disease Modifying Agents for Early and Preclinical Alzheimer's Disease Intervention: What Evidence is Meaningful to Patients, Providers, and Payers?

BACKGROUND: Drug development for disease modifying agents in Alzheimer's disease (AD) is focused increasingly on targeting underlying pathology in very early stages of AD or in cognitively normal patients at elevated risk of developing dementia due to Alzheimer's. Very early interventional studies of this type have many uncertainties, including whether they can provide the clinical results that payers, providers, and patients will wish to see for decisions. This paper describes an initiative to create greater transparency for researchers to anticipate these decision needs. OBJECTIVE: To create multi-stakeholder-vetted recommendations for the design of studies in later phases of drug development to evaluate the ability of disease modifying agents to delay or prevent the onset of dementia due to Alzheimer's disease (AD). DESIGN: A multi-stakeholder expert workgroup and overseeing steering group were convened to discuss current advances in early interventional clinical trial design and the evidence needs of patients, providers, and payers. Eight teleconferences and one in-person all-day meeting were held. Meetings were recorded and summary notes prepared between sessions. Final conclusions were consolidated by the project team with the workgroup Chair based on these discussions and were reviewed by group members. SETTING: The in-person meeting was held in Baltimore, MD. PARTICIPANTS: In total, 36 stakeholders representing life sciences industry, payers or health technology assessors, patient advocates and research advocacy organizations, regulators, clinical experts and academic or NIH researchers. INTERVENTION: N/A. MEASUREMENTS: N/A. RESULTS: Certain aspects of clinical trial design were deemed important to address stakeholder decision needs for future Alzheimer's prevention drugs even as the field rapidly progresses. These include the need for more robust behavioral and psychological outcome data in early symptomatic disease and the need to update activities of daily living measures to include "digital independence." CONCLUSIONS: Amyloid, tau, and biomarkers of neurodegeneration should be included in trials and studied in relation to other early measures of change meaningful to individuals with AD, their families, and health plans. These measures include early sensitive changes in behavioral and psychological measures and ability to navigate the contemporary digital landscape. Additional work is needed to generate more robust behavioral and psychological outcome data in early symptomatic disease, and to generate multi-stakeholder consensus on early measures of change and magnitudes of change that will be meaningful to patients, providers, and payers.

Current capabilities of the residual stress diffractometer at the high flux isotope reactor.

The engineering diffractometer 2nd Generation Neutron Residual Stress Facility (NRSF2) at the Oak Ridge National Laboratory's High Flux Isotope Reactor was built specifically for the mapping of residual strains. NRSF2 is optimized to investigate a wide range of engineering materials by providing the user a selection of monochromatic neutron wavelengths to maintain the selected Bragg reflection near 2θ = 90°, which is the optimal scattering geometry for strain mapping. Details of the instrument configuration and operation are presented, and considerations for experimental planning are also discussed. Selected examples of recent residual stress work completed with NRSF2 are presented to highlight capabilities.

Grain growth in nanocrystalline yttrium-stabilized zirconia thin films synthesized by spin coating of polymeric precursors.

This article reports results of experimental studies on the microstructural evolution of nanocrystalline yttrium-stabilized zirconia thin films synthesized on a Si substrate via a polymeric precursor spin-coating approach. Grain growth behavior has been investigated at different annealing temperatures (700-1200 degrees C) for periods of up to 240 h. A similar film thickness (approximately 120 nm) was maintained for all of the samples used in this study, to avoid variation in film thickness-dependent grain growth. The effects of the thermal history of the film and the annealing atmosphere on the grain growth were also studied. A simple semiempirical grain growth model has been developed to describe isothermal annealing data and to predict dynamic grain growth behavior during the sintering of polymeric precursor layers to form cubic-phase nanocrystalline yttrium-stabilized zirconia films.

Sustainable mesoporous carbons as storage and controlled-delivery media for functional molecules.

Here, we report the synthesis of surfactant-templated mesoporous carbons from lignin, which is a biomass-derived polymeric precursor, and their potential use as a controlled-release medium for functional molecules such as pharmaceuticals. To the best of our knowledge, this is the first report on the use of lignin for chemical-activation-free synthesis of functional mesoporous carbon. The synthesized carbons possess the pore widths within the range of 2.5-12.0 nm. In this series of mesoporous carbons, our best result demonstrates a Brunauer-Emmett-Teller (BET) surface area of 418 m(2)/g and a mesopore volume of 0.34 cm(3)/g, which is twice the micropore volume in this carbon. Because of the dominant mesoporosity, this engineered carbon demonstrates adsorption and controlled release of a representative pharmaceutical drug, captopril, in simulated gastric fluid. Large-scale utilization of these sustainable mesoporous carbons in applications involving adsorption, transport, and controlled release of functional molecules is desired for industrial processes that yield lignin as a coproduct.

Three-dimensional magnetic correlations in multiferroic LuFe2O4.

We present single crystal neutron diffraction measurements on multiferroic LuFe(2)O(4). Magnetic reflections are observed below transitions at 240 and 175 K indicating that the magnetic interactions in LuFe(2)O(4) are three-dimensional in character. The magnetic structure is refined as a ferrimagnetic spin configuration below the 240 K transition. Below 175 K a significant broadening of the magnetic peaks is observed along with the buildup of a diffuse component to the magnetic scattering.

Creep-resistant, Al2O3-forming austenitic stainless steels.

A family of inexpensive, Al2O3-forming, high-creep strength austenitic stainless steels has been developed. The alloys are based on Fe-20Ni-14Cr-2.5Al weight percent, with strengthening achieved through nanodispersions of NbC. These alloys offer the potential to substantially increase the operating temperatures of structural components and can be used under the aggressive oxidizing conditions encountered in energy-conversion systems. Protective Al2O3 scale formation was achieved with smaller amounts of aluminum in austenitic alloys than previously used, provided that the titanium and vanadium alloying additions frequently used for strengthening were eliminated. The smaller amounts of aluminum permitted stabilization of the austenitic matrix structure and made it possible to obtain excellent creep resistance. Creep-rupture lifetime exceeding 2000 hours at 750 degrees C and 100 megapascals in air, and resistance to oxidation in air with 10% water vapor at 650 degrees and 800 degrees C, were demonstrated.