Pharmacokinetics of Benznidazole in Healthy Volunteers and Implications in Future Clinical Trials.

Despite its toxicity and low efficacy in the chronic phase, benznidazole is the drug of choice in Chagas disease. Scarce information about pharmacokinetics and pharmacodynamics of benznidazole has been published. We performed a phase I, open-label, nonrandomized pharmacokinetic study of benznidazole (Abarax) conducted with 8 healthy adult volunteers at the Infectious Diseases Department of the Vall d'Hebron University Hospital (Barcelona, Spain). The separation and detection of benznidazole were performed on a Waters Acquity ultraperformance liquid chromatography system (UPLC) coupled with a Waters Xevo TQ MS triple quadrupole mass spectrometer. The pharmacokinetic parameters were calculated based on a noncompartmental body model using Phoenix WinNonlin version 6.3 software. Furthermore, computational simulations were calculated for the multiple-dose administration at two dose regimens: 100 mg of benznidazole administered every 8 h and 150 mg of benznidazole administered every 12 h. After benznidazole administration, the median area under the concentration-time curve from time zero to time t (AUC0-t ) and extrapolated to infinity (AUC0-∞) were about 46.4 µg · h/ml and 48.4 µg · h/ml, respectively. Plasma benznidazole concentrations peaked at 3.5 h, with maximal concentrations of 2.2 µg/ml, and benznidazole exhibited a terminal half-life of 12.1 h. The median maximum concentration (Cmax) of benznidazole was lower in men than in women (1.6 versus 2.9 µg/ml), and median volume of distribution (V) as a function of bioavailability (F) was higher in men than in women (125.9 versus 88.6 liters). In conclusion, dose regimens (150 mg/12 h or 100 mg/8 h) reached a steady-state range concentration above of the minimum experimental therapeutic dose. Sex differences in the benznidazole pharmacokinetics were observed; mainly, men had lower Cmax and higher V/F than women.

Stability study of sodium colistimethate-loaded lipid nanoparticles.

In the last decades, the encapsulation of antibiotics into nanoparticulate carriers has gained increasing attention for the treatment of infectious diseases. Sodium colistimethate-loaded solid lipid nanoparticles (Colist-SLNs) and nanostructured lipid carriers (Colist-NLCs) were designed aiming to treat the pulmonary infection associated to cystic fibrosis patients. The nanoparticles were freeze-dried using trehalose as cryoprotectant. The stability of both nanoparticles was analysed over one year according to the International Conference of Harmonisation (ICH) guidelines by determining the minimum inhibitory concentration (MIC) against clinically isolated Pseudomonas aeruginosa strains and by studying their physico-chemical characteristics. The results showed that Colist-SLNs lost their antimicrobial activity at the third month; on the contrary, the antibacterial activity of Colist-NLCs was maintained throughout the study within an adequate range (MIC ≤16 µg/mL). In addition, Colist-NLCs exhibited suitable physico-chemical properties at 5 °C and 25 °C/60% relative humidity over one year. Altogether, Colist-NLCs proved to have better stability than Colist-SLNs.

Pulmonary drug delivery: a review on nanocarriers for antibacterial chemotherapy.

As the WHO stated, lower respiratory infections are the third leading cause of death. In addition, it is remarkable that antimicrobial resistance represents a huge threat. Thus, new therapeutic weapons are required. Among the possible alternatives, antibiotic encapsulation in nanoparticles has gained much attention in terms of improved tolerability, activity and ability to combat the resistance mechanisms of bacteria. In this regard, this review article focuses on the latest nanocarrier approaches for inhalatory therapy of antibiotics. First, the technology related to lung disposition will be reviewed. Then, nanocarrier systems will be introduced and the challenges required to perform adequate pulmonary deposition analysed. In the following part, drug delivery systems (DDSs) on the market or in clinical trials are described and, finally, new approaches of nanoparticles that have reached pre-clinical stage are enumerated. Altogether, this review aims at gathering together the novel nanosystems for anti-infectious therapy, underlining the potential of DDSs to improve and optimize currently available antibiotic therapies in the context of lung infections.

Protamine/DNA/Niosome Ternary Nonviral Vectors for Gene Delivery to the Retina: The Role of Protamine.

The present study aimed to evaluate the incorporation of protamine into niosome/DNA vectors to analyze the potential application of this novel ternary formulation to deliver the pCMS-EGFP plasmid into the rat retina. Binary vectors based on niosome/DNA and ternary vectors based on protamine/DNA/niosomes were prepared and physicochemically characterized. In vitro experiments were performed in ARPE-19 cells. At 1:1:5 protamine/DNA/niosome mass ratio, the resulted ternary vectors had 150 nm size, positive charge, spherical morphology, and condensed, released, and protected the DNA against enzymatic digestion. The presence of protamine in the ternary vectors improved transfection efficiency, cell viability, and DNA condensation. After ocular administration, the EGFP expression was detected in different cell layers of the retina depending on the administration route without any sign of toxicity associated with the formulations. While subretinal administration transfected mainly photoreceptors and retinal pigment epithelial cells at the site of injection, intravitreal administration produced a more uniform distribution of the protein expression through the inner layers of the retina. The protein expression in the retina persisted for at least one month after both administrations. Our study highlights the flattering properties of protamine/DNA/niosome ternary vectors for efficient and safe gene delivery to the rat retina.

Niosomes based on synthetic cationic lipids for gene delivery: the influence of polar head-groups on the transfection efficiency in HEK-293, ARPE-19 and MSC-D1 cells.

We designed niosomes based on three lipids that differed only in the polar-head group to analyze their influence on the transfection efficiency. These lipids were characterized by small-angle X-ray scattering before being incorporated into the niosomes which were characterized in terms of pKa, size, zeta potential, morphology and physical stability. Nioplexes were obtained upon the addition of a plasmid. Different ratios (w/w) were selected to analyze the influence of this parameter on size, charge and the ability to condense, release and protect the DNA. In vitro transfection experiments were performed in HEK-293, ARPE-19 and MSC-D1 cells. Our results show that the chemical composition of the cationic head-group clearly affects the physicochemical parameters of the niosomes and especially the transfection efficiency. Only niosomes based on cationic lipids with a dimethyl amino head group (lipid 3) showed a transfection capacity when compared with their counterparts amino (lipid 1) and tripeptide head-groups (lipid 2). Regarding cell viability, we clearly observed that nioplexes based on the cationic lipid 3 had a more deleterious effect than their counterparts, especially in ARPE-19 cells at 20/1 and 30/1 ratios. Similar studies could be extended to other series of cationic lipids in order to progress in the research on safe and efficient non-viral vectors for gene delivery purposes.

Bioinspired gelatin/bioceramic composites loaded with bone morphogenetic protein-2 (BMP-2) promote osteoporotic bone repair.

There are currently several commercialized products approved by the Food and Drug Administration and the European Medicines Agency based on the use of recombinant human BMP-2 for the treatment of non-unions long fractures and spinal fusion. However, the adverse effects recorded with the use of BMPs suggest the need for drug delivery carriers that allow reducing the required doses and improve their cost-effectiveness. Herein, we have developed a new osteoconductive scaffold that reduces the required doses of BMP-2 for promoting bone regeneration in an osteoporotic defect model. The composite is, in brief, a gelatin-based 3D scaffold reinforced with either calcium sulfate or hydroxyapatite as an inorganic osteoconductive biomaterial. To this end, the organic/inorganic composite systems showed high hydration capacity and good in vitro degradability. The incorporation of 7.5% (m/v) ceramic compounds resulted in scaffolds with stiffer Young modulus (179 and 75 kPa for CaSO4_7 and HA_7, respectively) than bare gelatin hydrogels (48 kPa). Studies with human bone-marrow derived mesenchymal stem cells (hBM-MSCs) revealed that the 3D scaffolds promote cell adhesion and proliferation along with osteogenic differentiation capabilities. Specifically, downregulation of stemness (Nanog, Oct4) genes and upregulation of osteogenic markers (ALP, Col1a1, Fmod) by two fold were observed over 10 days under basal culture conditions. Promisingly, the sustained in vitro release of BMP-2 observed from the porous reinforced scaffolds allowed us to address the critical-sized osteoporotic mice calvarial defects with a relatively low growth factor doses (600 ng BMP-2/scaffold) compared to conventional doses at 2-15 micrograms. Overall, this study demonstrates the promising potential of osteoconductive gelatin/calcium bioceramics composites as osteogenic growth factors delivery carriers for bone-regeneration via ultra-low growth factor doses.

Biomaterial-based technologies for brain anti-cancer therapeutics and imaging.

Treating malignant brain tumors represents one of the most formidable challenges in oncology. Contemporary treatment of brain tumors has been hampered by limited drug delivery across the blood-brain barrier (BBB) to the tumor bed. Biomaterials are playing an increasingly important role in developing more effective brain tumor treatments. In particular, polymer (nano)particles can provide prolonged drug delivery directly to the tumor following direct intracerebral injection, by making them physiochemically able to cross the BBB to the tumor, or by functionalizing the material surface with peptides and ligands allowing the drug-loaded material to be systemically administered but still specifically target the tumor endothelium or tumor cells themselves. Biomaterials can also serve as targeted delivery devices for novel therapies including gene therapy, photodynamic therapy, anti-angiogenic and thermotherapy. Nanoparticles also have the potential to play key roles in the diagnosis and imaging of brain tumors by revolutionizing both preoperative and intraoperative brain tumor detection, allowing early detection of pre-cancerous cells, and providing real-time, longitudinal, non-invasive monitoring/imaging of the effects of treatment. Additional efforts are focused on developing biomaterial systems that are uniquely capable of delivering tumor-associated antigens, immunotherapeutic agents or programming immune cells in situ to identify and facilitate immune-mediated tumor cell killing. The continued translation of current research into clinical practice will rely on solving challenges relating to the pharmacology of nanoparticles but it is envisioned that novel biomaterials will ultimately allow clinicians to target tumors and introduce multiple, pharmaceutically relevant entities for simultaneous targeting, imaging, and therapy in a unique and unprecedented manner.

Design and characterization of calcium alginate microparticles coated with polycations as protein delivery system.

Bovine serum albumin (BSA) loaded calcium alginate microparticles (MPs) produced in this study by a w/o emulsification and external gelation method exhibited spherical and fairly smooth and porous morphology with 1.052 ± 0.057 µm modal particle size. The high permeability of the calcium alginate hydrogel lead to a potent burst effect and too fast protein release. To overcome these problems, MPs were coated with polycations, such as chitosan, poly-L-lysine and DEAE-dextran. Our results demonstrated that coated MPs showed slower release and were able to significantly reduce the release of BSA in the first hour. Therefore, this method can be applied to prepare coated alginate MPs which could be an optimal system for the controlled release of biotherapeutic molecules. Nevertheless, further studies are needed to optimize delivery properties which could provide a sustained release of proteins.

Development, characterization and sterilisation of Nanocellulose-alginate-(hyaluronic acid)- bioinks and 3D bioprinted scaffolds for tissue engineering.

3D-bioprinting is an emerging technology of high potential in tissue engineering (TE), since it shows effective control over scaffold fabrication and cell distribution. Biopolymers such as alginate (Alg), nanofibrillated cellulose (NC) and hyaluronic acid (HA) offer excellent characteristics for use as bioinks due to their excellent biocompatibility and rheological properties. Cell incorporation into the bioink requires sterilisation assurance, and autoclave, ß-radiation and γ-radiation are widely used sterilisation techniques in biomedicine; however, their use in 3D-bioprinting for bioinks sterilisation is still in their early stages. In this study, different sterilisation procedures were applied on NC-Alg and NC-Alg-HA bioinks and their effect on several parameters was evaluated. Results demonstrated that NC-Alg and NC-Alg-HA bioinks suffered relevant rheological and physicochemical modifications after sterilisation; yet, it can be concluded that the short cycle autoclave is the best option to sterilise both NC-Alg based cell-free bioinks, and that the incorporation of HA to the NC-Alg bioink improves its characteristics. Additionally, 3D scaffolds were bioprinted and specifically characterized as well as the D1 mesenchymal stromal cells (D1-MSCs) embedded for cell viability analysis. Notably, the addition of HA demonstrates better scaffold properties, together with higher biocompatibility and cell viability in comparison with the NC-Alg scaffolds. Thus, the use of MSCs containing NC-Alg based scaffolds may become a feasible tissue engineering approach for regenerative medicine.

Type 1 Diabetes Mellitus reversal via implantation of magnetically purified microencapsulated pseudoislets.

Microencapsulation of pancreatic islets for the treatment of Type I Diabetes Mellitus (T1DM) generates a high quantity of empty microcapsules, resulting in high therapeutic graft volumes that can enhance the host's immune response. We report a 3D printed microfluidic magnetic sorting device for microcapsules purification with the objective to reduce the number of empty microcapsules prior transplantation. In this study, INS1E pseudoislets were microencapsulated within alginate (A) and alginate-poly-L-lysine-alginate (APA) microcapsules and purified through the microfluidic device. APA microcapsules demonstrated higher mechanical integrity and stability than A microcapsules, showing better pseudoislets viability and biological function. Importantly, we obtained a reduction of the graft volume of 77.5% for A microcapsules and 78.6% for APA microcapsules. After subcutaneous implantation of induced diabetic Wistar rats with magnetically purified APA microencapsulated pseudoislets, blood glucose levels were restored into normoglycemia (<200 mg/dL) for almost 17 weeks. In conclusion, our described microfluidic magnetic sorting device represents a great alternative approach for the graft volume reduction of microencapsulated pseudoislets and its application in T1DM disease.

Solid lipid nanoparticles for retinal gene therapy: transfection and intracellular trafficking in RPE cells.

Retinal pigment epithelial (RPE) cells are usually employed to study DNA systems for diseases related to problems in the retina. Solid lipid nanoparticles (SLNs) have been shown to be useful non-viral vectors for gene therapy. The objective of this work was to evaluate the transfection capacity of SLNs in the human retinal pigment epithelial established cell line (ARPE-19) in order to elucidate the potential application of this vector in the treatment of retinal diseases. Results showed a lower transfection level of SLNs in ARPE-19 cells than in HEK293 (2.5% vs. 14.9% EGFP positive cells at 72h post-transfection). Trafficking studies revealed a delay in cell uptake of the vectors in ARPE-19 cells. Differences in internalization process into the two cell lines studied explain, in part, the difference in the gene expression. The clathrin-mediated endocytosis in ARPE-19 cells directs the solid lipid nanoparticles to lysosomes; moreover, the low division rate of this cell line hampers the entrance of DNA into the nucleus. The knowledge of intracellular trafficking is very useful in order to design more efficient vectors taking into account the characteristics of the specific cell line to be transfected.

Low molecular-weight hyaluronan as a cryoprotectant for the storage of microencapsulated cells.

The low-temperature storage of therapeutic cell-based products plays a crucial role in their clinical translation for the treatment of diverse diseases. Although dimethylsulfoxide (DMSO) is the most successful cryoprotectant in slow freezing of microencapsulated cells, it has shown adverse effects after cryopreserved cell-based products implantation. Therefore, the search of alternative non-toxic cryoprotectants for encapsulated cells is continuously investigated to move from bench to the clinic. In this work, we investigated the low molecular-weight hyaluronan (low MW-HA), a natural non-toxic and non-sulfated glycosaminoglycan, as an alternative non-permeant cryoprotectant for the slow freezing cryopreservation of encapsulated cells. Cryopreservation with low MW-HA provided similar metabolic activity, cell dead and early apoptotic cell percentage and membrane integrity after thawing, than encapsulated cells stored with either DMSO 10% or Cryostor 10. However, the beneficial outcomes with low MW-HA were not comparable to DMSO with some encapsulated cell types, such as the human insulin secreting cell line, 1.1B4, maybe explained by the different expression of the CD44 surface receptor. Altogether, we can conclude that low MW-HA represents a non-toxic natural alternative cryoprotectant to DMSO for the cryopreservation of encapsulated cells.

Advances in the slow freezing cryopreservation of microencapsulated cells.

Over the past few decades, the use of cell microencapsulation technology has been promoted for a wide range of applications as sustained drug delivery systems or as cells containing biosystems for regenerative medicine. However, difficulty in their preservation and storage has limited their availability to healthcare centers. Because the preservation in cryogenic temperatures poses many biological and biophysical challenges and that the technology has not been well understood, the slow cooling cryopreservation, which is the most used technique worldwide, has not given full measure of its full potential application yet. This review will discuss the different steps that should be understood and taken into account to preserve microencapsulated cells by slow freezing in a successful and simple manner. Moreover, it will review the slow freezing preservation of alginate-based microencapsulated cells and discuss some recommendations that the research community may pursue to optimize the preservation of microencapsulated cells, enabling the therapy translate from bench to the clinic.

Engineering a Clinically Translatable Bioartificial Pancreas to Treat Type I Diabetes.

Encapsulating, or immunoisolating, insulin-secreting cells within implantable, semipermeable membranes is an emerging treatment for type 1 diabetes. This approach can eliminate the need for immunosuppressive drug treatments to prevent transplant rejection and overcome the shortage of donor tissues by utilizing cells derived from allogeneic or xenogeneic sources. Encapsulation device designs are being optimized alongside the development of clinically viable, replenishable, insulin-producing stem cells, for the first time creating the possibility of widespread therapeutic use of this technology. Here, we highlight the status of the most advanced and widely explored implementations of cell encapsulation with an eye toward translating the potential of this technological approach to medical reality.

Solid lipid nanoparticles: formulation factors affecting cell transfection capacity.

Since solid lipid nanoparticles (SLNs) were introduced as non-viral transfection systems, very few reports of their use for gene delivery have been published. In this work different formulations based on SLN-DNA complexes were formulated in order to evaluate the influence of the formulation components on the "in vitro" transfection capacity. SLNs composed by the solid lipid Precirol ATO 5, the cationic lipid DOTAP and the surfactant Tween 80, and SLN-DNA complexes prepared at different DOTAP/DNA ratios were characterized by studying their size, surface charge, DNA protection capacity, transfection and cell viability in HEK293 cultured cells. The incorporation of Tween 80 allowed for the reduction of the cationic lipid concentration. The formulations prepared at DOTAP/DNA ratios 7/1, 5/1 and 4/1 provided almost the same transfection levels (around 15% transfected cells), without significant differences between them (p>0.05). Other assayed formulations presented lower transfection. Transfection activity was dependent on the DOTAP/DNA ratio since it influences the DNA condensation into the SLNs. DNA condensation is a crucial factor which conditions the transfection capacity of SLNs, because it influences DNA delivery from nanoparticles, gene protection from external agents and DNA topology.

Biologically active and biomimetic dual gelatin scaffolds for tissue engineering.

We have designed, developed and optimized Genipin cross-linked 3D gelatin scaffolds that were biologically active and biomimetic, show a dual activity both for growth factor and cell delivery. Type B gelatin powder was dissolved in DI water. 100mg of genipin was dissolved in 10ml of DI water. Three genipin concentrations were prepared: 0.1%, 0.2% and 0.3% (w/v). Solutions were mixed at 40°C and under stirring and then left crosslinking for 72h. Scaffolds were obtained by punching 8 mm-cylinders into ethanol 70% solution for 10min and then freeze-drying. Scaffolds were biologically, biomechanically and morphologically evaluated. Cell adhesion and morphology of D1-Mesenchymal stem cells (MSCs) and L-929 fibroblast was studied. Vascular endothelial grwoth factor (VEGF) and Sonic hedgehog (SHH) were used as model proteins. Swelling ratio increased and younǵs module decreased along with the concentration of genipin. All scaffolds were biocompatible according to the toxicity test. MSC and L-929 cell adhesion improved in 0.2% of genipin, obtaining better results with MSCs. VEGF and SHH were released from the gels. This preliminary study suggest that the biologically active and dual gelatin scaffolds may be used for tissue engineering approaches like bone regeneration.

Use of Flow Focusing Technique for Microencapsulation of Myoblasts.

Alginate cell microencapsulation implies the immobilization of cells within a polymeric membrane that allows the bidirectional diffusion of nutrients and oxygen inside the microcapsules and the release of waste and therapeutic molecules outside them. This technology has been applied to several cell types and it has been extensively described with pancreatic islets. However, other cells such as myoblasts are being currently studied and showing high interest. Moreover, different systems and approaches have been developed for cell encapsulation such as electrostatic extrusion and Flow focusing technology. When Flow focusing technology is applied for myoblast encapsulation, several factors should be considered, such as the pressure, the flow of the system, or the diameter size of the nebulizer, which will determine the final diameter size and shape of the microcapsules containing the myoblasts. Finally, viability of encapsulated myoblasts needs to be assessed before further studies are performed.

Microencapsulated Cells for Cancer Therapy.

The microencapsulation of different types of cells that are able to produce therapeutic factors is being investigated for the treatment of several human diseases. Most efforts are focused on chronic and degenerative diseases as this strategy could become an alternative to some commonly used parenteral treatments that need to be repeatedly administered. But, this approach has also been investigated in the field of oncology with the aim of providing immunomodulatory antibodies that are able to enhance the patient's inherent immune response against the tumor. These kind of treatments would provide the patient with the therapeutic drug produced in situ, de novo, and in a sustained way, making the therapy more comfortable.Although different devices are nowadays available to produce cell-enclosing alginate-microcapsules, here, we describe the most important steps and advices in order to fabricate alginate-poly-L-lysine-alginate microcapsules containing hybridoma cells for cancer management using an electrostatic bead generator, and how to evaluate the viability of those cells over the time.

Morphological Changes in a Severe Model of Parkinson's Disease and Its Suitability to Test the Therapeutic Effects of Microencapsulated Neurotrophic Factors.

The unilateral 6-hydroxydopamine (6-OHDA) lesion of medial forebrain bundle (MFB) in rats affords us to study the advanced stages of Parkinson's disease (PD). Numerous evidences suggest synergic effects when various neurotrophic factors are administered in experimental models of PD. The aim of the present work was to assess the morphological changes along the rostro-caudal axis of caudo-putamen complex and substantia nigra (SN) in the referred model in order to test the suitability of a severe model to evaluate new neurorestorative therapies. Administration of 6-OHDA into MFB in addition to a remarkable depletion of dopamine in the nigrostriatal system induced an increase of glial fibrillary acidic protein (GFAP)-positive cells in SN and an intense immunoreactivity for OX-42, vascular endothelial growth factor (VEGF), and Lycopersycum esculentum agglutinin (LEA) in striatum and SN. Tyrosine hydroxylase (TH) immunostaining revealed a significant decrease of the TH-immunopositive striatal volume in 6-OHDA group from rostral to caudal one. The loss of TH-immunoreactive (TH-ir) neurons and axodendritic network (ADN) was higher in caudal sections. Morphological recovery after the implantation of microspheres loaded with VEGF and glial cell line-derived neurotrophic factor (GDNF) in parkinsonized rats was related to the preservation of the TH-ir cell number and ADN in the caudal region of the SN. In addition, these findings support the neurorestorative role of VEGF+GDNF in the dopaminergic system and the synergistic effect between both factors. On the other hand, a topological distribution of the dopaminergic system was noticeable in the severe model, showing a selective vulnerability to 6-OHDA and recovering after treatment.

In vivo evaluation of EPO-secreting cells immobilized in different alginate-PLL microcapsules.

Alginates are the most employed biomaterials for cell encapsulation due to their abundance, easy gelling properties and apparent biocompatibility. However, as natural polymers different impurities including endotoxins, proteins and polyphenols can be found in their composition. Several purification protocols as well as different batteries of assays to prove the biocompatibility of the alginates in vitro have been recently developed. However, little is known about how the use of alginates with different purity grade may affect the host immune response after their implantation in vivo. The present paper investigates the long-term functionality and biocompatibility of murine erythropoietin (EPO) secreting C2C12 cells entrapped in microcapsules elaborated with alginates with different properties (purity, composition and viscosity). Results showed that independently of the alginate type employed, the animals presented elevated hematocrit levels until day 130, remaining at values between 70-87%. However, histological analysis of the explanted devices showed higher overgrowth around non-biomedical grade alginate microcapsules which could be directly related with higher impurity content of this type of alginate. Although EPO delivery may be limited by the formation of a fibrotic layer around non-biomedical grade alginate microcapsules, the high EPO secretion of the encapsulated cells together with the pharmacodynamic behaviour and the angiogenic and immune-modulatory properties of EPO result in no direct correlation between the biocompatibility of the alginate and the therapeutic response obtained.