Biotransformation of Cortisone with Rhodococcus rhodnii: Synthesis of New Steroids.

Cortisone is a steroid widely used as an anti-inflammatory drug able to suppress the immune system, thus reducing inflammation and attendant pain and swelling at the site of an injury. Due to its numerous side effects, especially in prolonged and high-dose therapies, the development of the pharmaceutical industry is currently aimed at finding new compounds with similar activities but with minor or no side effects. Biotransformations are an important methodology towards more sustainable industrial processes, according to the principles of "green chemistry". In this work, the biotransformation of cortisone with Rhodococcus rhodnii DSM 43960 to give two new steroids, i.e., 1,9ß,17,21-tetrahydoxy-4-methyl-19-nor-9ß-pregna-1,3,5(10)-trien-11,20-dione and 1,9ß,17,20ß,21-pentahydoxy-4-methyl-19-nor-9ß-pregna-1,3,5(10)-trien-11-one, is reported. These new steroids have been fully characterized.

Quantification of Lycopene, ß-Carotene, and Total Soluble Solids in Intact Red-Flesh Watermelon (Citrullus lanatus) Using On-Line Near-Infrared Spectroscopy.

A great interest has recently been focused on lycopene and ß-carotene, because of their antioxidant action in the organism. Red-flesh watermelon is one of the main sources of lycopene as the most abundant carotenoid. The use of near-infrared spectroscopy (NIRS) in post-harvesting has permitted us to rapidly quantify lycopene, ß-carotene, and total soluble solids (TSS) on single intact fruits. Watermelons, harvested in 2013-2015, were submitted to near-infrared (NIR) radiation while being transported along a conveyor belt system, stationary and in movement, and at different positions on the belt. Eight hundred spectra from 100 samples were collected as calibration set in the 900-1700 nm interval. Calibration models were performed using partial least squares (PLS) regression on pre-treated spectra (derivatives and SNV) in the ranges 2.65-151.75 mg/kg (lycopene), 0.19-9.39 mg/kg (ß-carotene), and 5.3%-13.7% (TSS). External validation was carried out with 35 new samples and on 35 spectra. The PLS models for intact watermelon could predict lycopene with R² = 0.877 and SECV = 15.68 mg/kg, ß-carotene with R² = 0.822 and SECV = 0.81 mg/kg, and TSS with R² = 0.836 and SECV = 0.8%. External validation has confirmed predictive ability with R² = 0.805 and RMSEP = 16.19 mg/kg for lycopene, R2 = 0.737 and RMSEP = 0.96 mg/kg for ß-carotene, and R² = 0.707 and RMSEP = 1.4% for TSS. The results allow for the market valorization of fruits.

Effects of Moisture and Particle Size on Quantitative Determination of Total Organic Carbon (TOC) in Soils Using Near-Infrared Spectroscopy.

Near-Infrared Spectroscopy is a cost-effective and environmentally friendly technique that could represent an alternative to conventional soil analysis methods, including total organic carbon (TOC). Soil fertility and quality are usually measured by traditional methods that involve the use of hazardous and strong chemicals. The effects of physical soil characteristics, such as moisture content and particle size, on spectral signals could be of great interest in order to understand and optimize prediction capability and set up a robust and reliable calibration model, with the future perspective of being applied in the field. Spectra of 46 soil samples were collected. Soil samples were divided into three data sets: unprocessed, only dried and dried, ground and sieved, in order to evaluate the effects of moisture and particle size on spectral signals. Both separate and combined normalization methods including standard normal variate (SNV), multiplicative scatter correction (MSC) and normalization by closure (NCL), as well as smoothing using first and second derivatives (DV1 and DV2), were applied to a total of seven cases. Pretreatments for model optimization were designed and compared for each data set. The best combination of pretreatments was achieved by applying SNV and DV2 on partial least squares (PLS) modelling. There were no significant differences between the predictions using the three different data sets (p < 0.05). Finally, a unique database including all three data sets was built to include all the sources of sample variability that were tested and used for final prediction. External validation of TOC was carried out on 16 unknown soil samples to evaluate the predictive ability of the final combined calibration model. Hence, we demonstrate that sample preprocessing has minor influence on the quality of near infrared spectroscopy (NIR) predictions, laying the ground for a direct and fast in situ application of the method. Data can be acquired outside the laboratory since the method is simple and does not need more than a simple band ratio of the spectra.

Biotransformations of Bile Acids with Bacteria from Cayambe Slaughterhouse (Ecuador): Synthesis of Bendigoles.

The biotransformations of cholic acid (1a), deoxycholic acid (1b), and hyodeoxycholic acid (1c) to bendigoles and other metabolites with bacteria isolated from the rural slaughterhouse of Cayambe (Pichincha Province, Ecuador) were reported. The more active strains were characterized, and belong to the genera Pseudomonas and Rhodococcus. Various biotransformation products were obtained depending on bacteria and substrates. Cholic acid (1a) afforded the 3-oxo and 3-oxo-4-ene derivatives 2a and 3a (45% and 45%, resp.) with P. mendocina ECS10, 3,12-dioxo-4-ene derivative 4a (60%) with Rh. erythropolis ECS25, and 9,10-secosteroid 6 (15%) with Rh. erythropolis ECS12. Bendigole F (5a) was obtained in 20% with P. fragi ECS22. Deoxycholic acid (1b) gave 3-oxo derivative 2b with P. prosekii ECS1 and Rh. erythropolis ECS25 (20% and 61%, resp.), while 3-oxo-4-ene derivative 3b was obtained with P. prosekii ECS1 and P. mendocina ECS10 (22% and 95%, resp.). Moreover, P. fragi ECS9 afforded bendigole A (8b; 80%). Finally, P. mendocina ECS10 biotransformed hyodeoxycholic acid (1c) to 3-oxo derivative 2c (50%) and Rh. erythropolis ECS12 to 6α-hydroxy-3-oxo-23,24-dinor-5ß-cholan-22-oic acid (9c, 66%). Bendigole G (5c; 13%) with P. prosekii ECS1 and bendigole H (8c) with P. prosekii ECS1 and Rh. erythropolis ECS12 (20% and 16%, resp.) were obtained.

Quantitative Determination of Fluorine Content in Blends of Polylactide (PLA)-Talc Using Near Infrared Spectroscopy.

Near-infrared spectroscopy (NIRS) has been widely used for quantitative and/or qualitative determination of a wide range of matrices. The objective of this study was to develop a NIRS method for the quantitative determination of fluorine content in polylactide (PLA)-talc blends. A blending profile was obtained by mixing different amounts of PLA granules and talc powder. The calibration model was built correlating wet chemical data (alkali digestion method) and NIR spectra. Using FT (Fourier Transform)-NIR technique, a Partial Least Squares (PLS) regression model was set-up, in a concentration interval of 0 ppm of pure PLA to 800 ppm of pure talc. Fluorine content prediction (R²cal = 0.9498; standard error of calibration, SEC = 34.77; standard error of cross-validation, SECV = 46.94) was then externally validated by means of a further 15 independent samples (R²EX.V = 0.8955; root mean standard error of prediction, RMSEP = 61.08). A positive relationship between an inorganic component as fluorine and NIR signal has been evidenced, and used to obtain quantitative analytical information from the spectra.

Development of FT-NIR models for the simultaneous estimation of chlorophyll and nitrogen content in fresh apple (Malus domestica) leaves.

Agricultural practices determine the level of food production and, to great extent, the state of the global environment. During the last decades, the indiscriminate recourse to fertilizers as well as the nitrogen losses from land application have been recognized as serious issues of modern agriculture, globally contributing to nitrate pollution. The development of a reliable Near-Infra-Red Spectroscopy (NIRS)-based method, for the simultaneous monitoring of nitrogen and chlorophyll in fresh apple (Malus domestica) leaves, was investigated on a set of 133 samples, with the aim of estimating the nutritional and physiological status of trees, in real time, cheaply and non-destructively. By means of a FT (Fourier Transform)-NIR instrument, Partial Least Squares (PLS) regression models were developed, spanning a concentration range of 0.577%-0.817% for the total Kjeldahl nitrogen (TKN) content (R2 = 0.983; SEC = 0.012; SEP = 0.028), and of 1.534-2.372 mg/g for the total chlorophyll content (R2 = 0.941; SEC = 0.132; SEP = 0.162). Chlorophyll-a and chlorophyll-b contents were also evaluated (R2 = 0.913; SEC = 0.076; SEP = 0.101 and R2 = 0.899; SEC = 0.059; SEP = 0.101, respectively). All calibration models were validated by means of 47 independent samples. The NIR approach allows a rapid evaluation of the nitrogen and chlorophyll contents, and may represent a useful tool for determining nutritional and physiological status of plants, in order to allow a correction of nutrition programs during the season.

Monitoring key parameters in bioprocesses using near-infrared technology.

Near-infrared spectroscopy (NIRS) is known to be a rapid and non-destructive technique for process monitoring. Bioprocesses are usually complex, from both the chemical (ill-defined medium composition) and physical (multiphase matrix) aspects, which poses an additional challenge to the development of robust calibrations. We investigated the use of NIRS for on-line and in-line monitoring of cell, substrate and product concentrations, during aerobic and anaerobic bacterial fermentations, in different fermentation strategies. Calibration models were built up, then validated and used for the automated control of fermentation processes. The capability of NIR in-line to discriminate among differently shaped bacteria was tested.

Biotransformations of terpenes by fungi from Amazonian citrus plants.

The biotransformations of (RS)-linalool (1), (S)-citronellal (2), and sabinene (3) with fungi isolated from the epicarp of fruits of Citrus genus of the Amazonian forest (i.e., C. limon, C. aurantifolia, C. aurantium, and C. paradisiaca) are reported. The more active strains have been characterized, and they belong to the genus Penicillium and Fusarium. Different biotransformation products have been obtained depending on fungi and substrates. (RS)-Linalool (1) afforded the (E)- and (Z)-furanlinalool oxides (7 and 8, resp.; 39 and 37% yield, resp.) with Fusarium sp. (1D2), 6-methylhept-5-en-2-one (4; 49%) with F. fujikuroi, and 1-methyl-1-(4-methypentyl)oxiranemethanol (6; 42%) with F. concentricum. (S)-Citronellal (2) gave (S)-citronellol (12; 36-76%) and (S)-citronellic acid (11; 5-43%) with Fusarium species, while diastereoisomeric p-menthane-3,8-diols 13 and 14 (20 and 50% yield, resp.) were obtained as main products with Penicillium paxilli. Finally, both Fusarium species and P. paxilli biotransformed sabinene (3) to give mainly 4-terpineol (19; 23-56%), and (Z)- and (E)-sabinene hydrates (17 (3-21%) and 18 (11-17%), resp.).

Enzymatic diastereo- and enantioselective synthesis of α-alkyl-α,ß-dihydroxyketones.

An enzymatic strategy for the preparation of optically pure α-alkyl-α,ß-dihydroxyketones is reported. Homo- and cross-coupling reactions of α-diketones catalyzed by acetylacetoin synthase (AAS) produce a set of α-alkyl-α-hydroxy-ß-diketones (30-60%, ee 67-90%), which in turn are reduced regio-, diastereo-, and enantioselectively to the corresponding chiral α-alkyl-α,ß-dihydroxyketones (60-70%, ee >95%) using acetylacetoin reductase (AAR) as catalyst. Both enzymes are obtained from Bacillus licheniformis and used in a crude form. The relative syn stereochemistry of the enantiopure α,ß-dihydroxy products is assigned by NOE experiments, whereas their absolute configuration is determined by conversion of the selected 3,4-dihydroxy-3-methyl-pentan-2-one to the natural product (+)-citreodiol.

7alpha- and 12alpha-Hydroxysteroid dehydrogenases from Acinetobacter calcoaceticus lwoffii: a new integrated chemo-enzymatic route to ursodeoxycholic acid.

We report the very efficient biotransformation of cholic acid to 7-keto- and 7,12-diketocholic acids with Acinetobacter calcoaceticus lwoffii. The enzymes responsible of the biotransformation (i.e. 7alpha- and 12alpha-hydroxysteroid dehydrogenases) are partially purified and employed in a new chemo-enzymatic synthesis of ursodeoxycholic acid starting from cholic acid. The first step is the 12alpha-HSDH-mediated total oxidation of sodium cholate followed by the Wolf-Kishner reduction of the carbonyl group to chenodeoxycholic acid. This acid is then quantitatively oxidized with 7alpha-HSDH to 7-ketochenodeoxycholic acid, that was chemically reduced to ursodeoxycholic acid (70% overall yield).

Lignin Degradation Efficiency of Chemical Pre-Treatments on Banana Rachis Destined to Bioethanol Production.

Valuable biomass conversion processes are highly dependent on the use of effective pretreatments for lignocellulose degradation and enzymes for saccharification. Among the nowadays available treatments, chemical delignification represents a promising alternative to physical-mechanical treatments. Banana is one of the most important fruit crops around the world. After harvesting, it generates large amounts of rachis, a lignocellulosic residue, that could be used for second generation ethanol production, via saccharification and fermentation. In the present study, eight chemical pretreatments for lignin degradation (organosolv based on organic solvents, sodium hypochlorite, hypochlorous acid, hydrogen peroxide, alkaline hydrogen peroxide, and some combinations thereof) have been tested on banana rachis and the effects evaluated in terms of lignin removal, material losses, and chemical composition of pretreated material. Pretreatment based on lignin oxidation have demonstrated to reach the highest delignification yield, also in terms of monosaccharides recovery. In fact, all the delignified samples were then saccharified with enzymes (cellulase and beta-glucosidase) and hydrolysis efficiency was evaluated in terms of final sugars recovery before fermentation. Analysis of Fourier transform infrared spectra (FTIR) has been carried out on treated samples, in order to better understand the structural effects of delignification on lignocellulose. Active chlorine oxidations, hypochlorous acid in particular, were the best effective for lignin removal obtaining in the meanwhile the most promising cellulose-to-glucose conversion.

Xanthomonas maltophilia CBS 897.97 as a source of new 7beta- and 7alpha-hydroxysteroid dehydrogenases and cholylglycine hydrolase: improved biotransformations of bile acids.

The paper reports the partial purification and characterization of the 7beta- and 7alpha-hydroxysteroid dehydrogenases (HSDH) and cholylglycine hydrolase (CGH), isolated from Xanthomonas maltophilia CBS 897.97. The activity of 7beta-HSDH and 7alpha-HSDH in the reduction of the 7-keto bile acids is determined. The affinity of 7beta-HSDH for bile acids is confirmed by the reduction, on analytical scale, to the corresponding 7beta-OH derivatives. A crude mixture of 7alpha- and 7beta-HSDH, in soluble or immobilized form, is employed in the synthesis, on preparative scale, of ursocholic and ursodeoxycholic acids starting from the corresponding 7alpha-derivatives. On the other hand, a partially purified 7beta-HSDH in a double enzyme system, where the couple formate/formate dehydrogenase allows the cofactor recycle, affords 6alpha-fluoro-3alpha, 7beta-dihydroxy-5beta-cholan-24-oic acid (6-FUDCA) by reduction of the corresponding 7-keto derivative. This compound is not obtainable by microbiological route. The efficient and mild hydrolysis of glycinates and taurinates of bile acids with CGH is also reported. Very promising results are also obtained with bile acid containing raw materials.

Optimized Production of Xylitol from Xylose Using a Hyper-Acidophilic Candida tropicalis.

The yeast Candida tropicalis DSM 7524 produces xylitol, a natural, low-calorie sweetener, by fermentation of xylose. In order to increase xylitol production rate during the submerged fermentation process, some parameters-substrate (xylose) concentration, pH, aeration rate, temperature and fermentation strategy-have been optimized. The maximum xylitol yield reached at 60-80 g/L initial xylose concentration, pH 5.5 at 37 °C was 83.66% (w/w) on consumed xylose in microaerophilic conditions (kLa = 2·h(-1)). Scaling up on 3 L fermenter, with a fed-batch strategy, the best xylitol yield was 86.84% (w/w), against a 90% of theoretical yield. The hyper-acidophilic behaviour of C. tropicalis makes this strain particularly promising for industrial application, due to the possibility to work in non-sterile conditions.

Study on Microbial Deposition and Contamination onto Six Surfaces Commonly Used in Chemical and Microbiological Laboratories.

The worktops in both chemical and microbiological laboratories are the surfaces most vulnerable to damage and exposure to contamination by indoor pollutants. The rate at which particles are deposited on indoor surfaces is an important parameter to determine human exposure to airborne biological particles. In contrast to what has been established for inorganic pollutants, no limit has been set by law for microbial contamination in indoor air. To our knowledge, a comparative study on the effect of surfaces on the deposition of microbes has not been carried out. An evaluation of the microbial contamination of worktop materials could be of crucial importance, both for safety reasons and for the reliability of tests and experiments that need to be carried out in non-contaminated environments. The aim of this study was to evaluate the overall microbial contamination (fungi, mesophilic and psychrophilic bacteria, staphylococci) on six widely used worktop materials in laboratories (glass, stainless steel, fine porcelain stoneware, post-forming laminate, high-performing laminate and enamel steel) and to correlate it with the characteristics of the surfaces. After cleaning, the kinetics of microbial re-contamination were also evaluated for all surfaces.

7alpha-OH epimerisation of bile acids via oxido-reduction with Xanthomonas maltophilia.

The microbial 7alpha-OH epimerisation of cholic, chenodeoxycholic, and 12-ketochenodeoxycholic acids (7alpha-OH bile acids) with Xanthomonas maltophilia CBS 827.97 to corresponding 7beta-OH derivatives with scarcity of oxygen is described. With normal pressure of oxygen the 7-OH oxidation products are obtained. No biotransformations are achieved in anaerobic conditions. The microbial 7alpha-OH epimerisation is achieved by oxidation of 7-OH function and subsequent reduction. Partial purification, in fact, of the enzymatic fraction revealed the presence of two hydroxysteroid dehydrogenases (HSDH) alpha- and beta-stereospecific together with a glycocholate hydrolase. On the basis of these results a further application is the microbial reduction of 6alpha-fluoro and 6beta-fluoro-3alpha-hydroxy-7-oxo-5beta-cholan-24-oic acid methyl esters to the corresponding 7alpha-OH and 7beta-OH derivatives.

Three new species of Aspergillus from Amazonian forest soil (Ecuador).

From an undisturbed natural forest soil in Ecuador, three fungal strains of the genus Aspergillus were isolated. Based on molecular and morphological features they are described as three new species, named A. quitensis, A. amazonicus, and A. ecuadorensis.

Enantioselective Baeyer-Villiger oxidation of bicyclo[3.2.0]hept-2-en-6-One with fungi: optimization of biotransformation and use of TiO2 as support of cell growth.

Fungi from Amazonian forest soil (Ecuador) and an Italian factory were screened for Baeyer-Villiger (BV) oxidation of bicyclo [3.2.0]hept-2-en-6-one to 2-oxabicyclo[3.3.0]oct-6-en-3-one (Corey's lactone). Isolates of Fusarium sp. and F. solani produced the (+)-(1R,5S)-lactone while isolates of Aspergillus terricola and A. amazonicus afforded the (-)-(1S,5R)-lactone. Highest conversions (85% yield and 70% enantiomeric excess) were obtained with A. amazonicus grown in presence of 2.7 mM titanium dioxide.

Improved enantioselectivity in the epoxidation of cinnamic acid derivatives with dioxiranes from keto bile acids.

The asymmetric epoxidation of substituted cinnamic acids has been obtained in the presence of different keto bile acid derivatives as optically active carbonyl inducers and Oxone as oxygen source. Predominant or almost exclusive formation of both enantiomeric epoxides is obtained (ee up to 95%) depending on the specific substitution at carbons C(7) and C(12) of the bile acid.