RESUMO
PURPOSE: In scaphoid fracture screw fixation, the screw is commonly placed along the long axis of the bone, without consideration of the fracture plane. This position is not perpendicular to transverse waist fractures or to the more common horizontal oblique fractures. Our aim was to examine the feasibility and describe possible approaches to, placing a screw perpendicular and in the center of the scaphoid waist fracture. METHODS: Computed tomography of 12 cadaver wrists was performed in 3 positions to examine possible approaches in flexion, neutral, and extension of the wrist. The scans were evaluated using a 3-dimensional model that simulated horizontal oblique (60°) and transverse (90°) fractures. We examined all possible approaches for screw positioning and their deviation from the axis perpendicular to the fracture and in the center of its plane. RESULTS: The preferred approaches for a perpendicular screw in a horizontal oblique fracture were found to be proximal-dorsal in flexion or transtrapezial in the extended or neutral positions (through the volar-radial trapezium). In transverse fractures, the possible approaches were proximal-dorsal or transtrapezial in the flexed or neutral positions and distal in the extended position (volar to volar-radial trapezium). In these approaches, the screw could be placed perpendicularly (deviating by < 10°) and in the center of the fracture in all specimens. CONCLUSIONS: According to this model, it appears feasible to place a perpendicular screw in the center of a horizontal oblique waist fracture using a proximal-dorsal approach in flexion or a transtrapezial approach in neutral or extension positions of the wrist. Palpable landmarks may be used as additional guides to direct these approaches according to the clinical setting. CLINICAL RELEVANCE: Perpendicular screw fixation of horizontal oblique or transverse scaphoid waist fractures is a possible option, if chosen for its biomechanical advantages.
Assuntos
Fraturas Ósseas , Osso Escafoide , Cadáver , Computadores , Fixação Interna de Fraturas , Fraturas Ósseas/diagnóstico por imagem , Fraturas Ósseas/cirurgia , Humanos , Osso Escafoide/diagnóstico por imagem , Osso Escafoide/cirurgiaRESUMO
PURPOSE: Scaphoid fractures are classified according to their 2-dimensional radiographic appearance, and transverse waist fractures are considered the most common. Our hypothesis was that most scaphoid fractures are not perpendicular to the longitudinal axis of the scaphoid (ie, not transverse). METHODS: Computerized 3-dimensional analyses were performed on 124 computed tomography scans of acute scaphoid fractures. Thirty of the fractures were displaced and virtually reduced. The angle between the scaphoid's first principal axis (longitudinal axis) and the fracture plane was analyzed for location and displacement. The distal radius articular surface was used to depict the volar-dorsal vector of the wrist. RESULTS: There were 86 fractures of the waist, 13 of the distal third, and 25 of the proximal third. The average angle between the scaphoid longitudinal axis and the fracture plane was 53° for all fractures and 56° for waist fractures, both differing significantly from a 90°, transverse fracture. The majority of fracture planes were found to have a volar distal to dorsal proximal (horizontal oblique) inclination relative to the volar-dorsal vector. CONCLUSIONS: Most waist fractures were horizontal oblique and not transverse. According to these findings, fixation of all fractures along the longitudinal axis of the scaphoid may not be the optimal mode of fixation for most. A different approach may be needed in accordance with the fracture plane. TYPE OF STUDY/LEVEL OF EVIDENCE: Diagnostic II.
Assuntos
Fraturas Ósseas/diagnóstico por imagem , Imageamento Tridimensional , Amplitude de Movimento Articular/fisiologia , Osso Escafoide/lesões , Tomografia Computadorizada por Raios X/métodos , Adolescente , Adulto , Análise de Variância , Intervalos de Confiança , Bases de Dados Factuais , Feminino , Fixação Interna de Fraturas/métodos , Consolidação da Fratura/fisiologia , Fraturas Ósseas/cirurgia , Humanos , Escala de Gravidade do Ferimento , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Osso Escafoide/diagnóstico por imagem , Osso Escafoide/cirurgia , Estatísticas não Paramétricas , Adulto JovemRESUMO
PURPOSE: Acute scaphoid fractures are commonly fixed with headless cannulated screws positioned in the center of the proximal fragment. Central placement of the screw may be difficult and may violate the scaphotrapezial joint. We hypothesize that placement of the screw through the scaphoid tuberosity will achieve perpendicular fixation of an oblique waist fracture and result in more stable fixation than a screw in the center of the proximal fragment. METHODS: We designed oblique osteotomies for 8 matched pairs of cadaver scaphoids and fixed each specimen with a headless cannulated screw. In 1 specimen, we positioned the screw at the center of the proximal fragment; we placed its matched pair perpendicular to the fracture. The perpendicular screw was directed through the scaphoid tuberosity. We placed the specimen under the increasing load of a pneumatically driven plunger. We compared stiffness, load, distance at failure, and mechanism of failure between the central and perpendicular screw groups. RESULTS: We found no difference between groups. Stiffness was identical in both groups (131 N/mm) and load to failure was similar (central screw, 137 N vs perpendicular screw, 148 N). CONCLUSIONS: In this biomechanical model of an unstable scaphoid fracture, we found that similar stability of fixation had been achieved with a screw perpendicular to the fracture plane with entry through the tuberosity, compared with a screw in a central position in the proximal fragment. This study suggests that placing the screw through the tuberosity, perpendicular to a short oblique fracture, will not impair fixation stability. CLINICAL RELEVANCE: Percutaneous fixation of scaphoid fractures has become popular although it is technically challenging. An easier distal approach through the tuberosity, without violating the scaphotrapezial joint, may not impair the fixation stability of an oblique fracture.
Assuntos
Fixação Interna de Fraturas/métodos , Fraturas Ósseas/cirurgia , Osso Escafoide/cirurgia , Fenômenos Biomecânicos , Parafusos Ósseos , Cadáver , Fixação Interna de Fraturas/instrumentação , Humanos , Osteotomia , Estresse MecânicoRESUMO
PURPOSE: The hypothesis of this study was that more stable fixation of acute scaphoid fractures may be achieved by a screw placed perpendicular to the fracture plane than along the long axis of the scaphoid, as previously suggested. We examined this assumption on different fracture patterns using a finite element analysis model. METHODS: A computed tomography scan of an intact scaphoid of a young man provided the data set for all fracture models. We used semiautomatic segmentation to create 3-dimensional computer models of the 3 simple fracture configurations: oblique, transverse waist, and proximal fractures, according to the Herbert classification. Each fracture type was analyzed, using finite elements, for its biomechanical response to 2 types of virtual fixation: a screw placed either perpendicular to the fracture plane or centrally along the long axis of the scaphoid. We measured motion at the fracture plane (in millimeters) and strain in the screw threads (in millipascals). RESULTS: Considerably less motion was measured at the fracture plane with the perpendicular screw compared with the long axis screw, especially in the oblique-type fractures: (1) Herbert-type B1 oblique fracture mean motion of 0.05 mm (+/-0.03) for the perpendicular screw versus 0.28 mm (+/-0.05) for the long axis screw; (2) B2 transverse waist fracture mean motion of 0.06 mm (+/-0.03) for the perpendicular screw versus 0.18 mm (+/-0.06) for the long axis screw; and (3) B3 proximal fracture mean motion of 0.07 mm (+/-0.01) for the perpendicular screw versus 0.28 mm (+/-0.011) for the long axis screw. Higher strains were measured on the screw placed perpendicular to the fracture. CONCLUSIONS: According to this model, higher fixation stability is achieved when the scaphoid is fixated perpendicular to the fracture. In transverse waist fractures, a centrally placed screw will also be perpendicular to the fracture, which explains the results of previous models.
Assuntos
Análise de Elementos Finitos , Fixação Interna de Fraturas/métodos , Fraturas Ósseas/cirurgia , Osso Escafoide/lesões , Adulto , Parafusos Ósseos , Simulação por Computador , Humanos , MasculinoRESUMO
PURPOSE: The recommended technique for the fixation of a scaphoid waist fracture involves a headless compression screw placed in the proximal fragment center. This is usually accomplished by placing a longitudinal axis screw as visualized by fluoroscopy. The screw length has been shown to have a biomechanical advantage. An alternative to these options, which has been debated in the literature, is a screw placed perpendicular to the fracture plane and in its center. The perpendicular screw may have a biomechanical advantage despite the fact that it may be shorter. This study examined the differences in location and length in actual patients between a screw in the center of the proximal fragment with a longitudinal axis screw, and the actual fixating screw. These were then compared to a perpendicular axis screw. METHODS: Pre- and post-operative CT scans of 10 patients with scaphoid waist fractures were evaluated using a 3D computer model. Comparisons were made between the length, location and angle of actual and virtual screw alternatives; namely, a screw along the central third of the proximal fragment (central screw axis) where the scaphoid longitudinal axis was calculated mathematically (longitudinal screw axis) and a screw placed at 90° to the fracture plane and in its center (perpendicular screw axis). RESULTS: The longitudinal axis screw was found to be significantly longer than the other axes (28.3mm). There was a significant difference between the perpendicular axis screw and the location and angle of the other screw axis, but it was only shorter than the longitudinal screw (23.6mm versus 25.5mm for the actual screw; ns.). CONCLUSIONS: A computed longitudinal axis screw is longer than a central or actual screw placed longitudinally by visual inspection by the surgeon. Although it needs to be placed using computer assisted (CAS) techniques, it may have the biomechanical advantages of a longer screw in a similar trajectory. The perpendicular screw was found to be significantly different in position and angle but not shorter than the actually placed screw. It has biomechanical advantages and does not require visualization with CAS methods, making it the more attractive alternative.
Assuntos
Fixação Interna de Fraturas , Fraturas Ósseas/cirurgia , Imageamento Tridimensional , Osso Escafoide/cirurgia , Tomografia Computadorizada por Raios X , Traumatismos do Punho/cirurgia , Adulto , Fenômenos Biomecânicos , Parafusos Ósseos , Simulação por Computador , Feminino , Análise de Elementos Finitos , Fixação Interna de Fraturas/métodos , Fraturas Ósseas/diagnóstico por imagem , Humanos , Masculino , Pessoa de Meia-Idade , Osso Escafoide/anatomia & histologia , Resultado do Tratamento , Traumatismos do Punho/diagnóstico por imagem , Adulto JovemRESUMO
BACKGROUND: Our goal was to analyze the movement of acute scaphoid waist fracture fragments and adjacent bones in a common coordinate system. Our hypothesis was that the distal scaphoid fragment flexes and pronates and the proximal fragment extends. METHODS: Computed tomography (CT) scans of patients diagnosed with an acute scaphoid waist fracture were evaluated using a 3-dimensional (3D) model. The scans of 57 nondisplaced and 23 displaced fractures were compared with a control group of 27 scans showing no pathological involvement of the wrist. Three anatomical landmarks were labeled on the distal and proximal fragments of the scaphoid, the lunate, and the trapezium. Each set of labels formed a triangle representing the bone or fragment. Four landmarks were labeled on the distal radial articular surface and used to create a common coordinate system. The position of each bone or fragment was calculated in reference to these coordinates. RESULTS: The displaced fracture group showed significant extension, supination, and volar translation of the proximal scaphoid fragment when compared with the other groups. The lunate tended toward a supinated position, which was not statistically significant. The distal scaphoid fragment and the trapezium showed no movement. CONCLUSIONS: In acute displaced scaphoid fractures, it is the proximal fragment that displaces and should be reduced. CLINICAL RELEVANCE: The typical "humpback" deformity is actually a "proximal extension" deformity, the consequence of displacement of the proximal fragment of the scaphoid (with the lunate). Manipulating only the proximal fragment (with the lunate) may be technically easier and more effective than manipulating both fragments.
Assuntos
Fraturas Ósseas/diagnóstico por imagem , Osso Escafoide/diagnóstico por imagem , Adolescente , Adulto , Análise de Variância , Pontos de Referência Anatômicos , Ossos do Carpo/diagnóstico por imagem , Fraturas Ósseas/fisiopatologia , Humanos , Imageamento Tridimensional , Pessoa de Meia-Idade , Variações Dependentes do Observador , Pronação/fisiologia , Tomografia Computadorizada por Raios X/métodos , Articulação do Punho/diagnóstico por imagem , Adulto JovemRESUMO
INTRODUCTION: Decreasing the length of the side plate of the dynamic hip screw would theoretically allow a smaller surgical incision, a shorter surgical time, decreased operative blood loss and minimal periosteal stripping. A new design of a very short plate dynamic hip screw based on two diagonal screws has been developed. Our study compares the new design and the four-hole side plate in respect to mechanical properties and bio-mechanical outcomes utilizing the Finite Element Analysis method. METHODS: Four pairs of fresh frozen cadaveric femora were extracted from male corpses aged 25-43 years (mean 34.8). One femur of each pair was fixated by means of the new system and the other by means of the conventional design. Mechanical loading was applied to all four pairs. The decline which occurred during the periodical loadings and the breakage loads of fixated bones were measured. Mechanical performance and probability of failure was assessed by conducting a mathematical analysis using the finite element method. FINDINGS: The average deflection under excessive cyclic loading was 33% higher in the bones fixated with the very short plate-dynamic hip screw device than in those fixated with the conventional dynamic hip screw. The average load failure during the collapse-loading test was 3120N for the very short plate-dynamic hip screw as compared to 4160N for the regular device. Mechanical testing did not provide decisive results regarding failure. The mathematical analysis performed indicated that the maximal stress in the very short plate-dynamic hip screw reached values 3-4-fold higher than in the regular dynamic hip screw. INTERPRETATION: Although the new design offers a minimally invasive approach to subtrochanteric femur fracture fixation, it was found to have insufficient biomechanical performance resulting in high probability of mechanical failure. The authors believe that the finite element method may have the potential to serve as an additional clinical tool for performing surgical preplanning and assist in decision making.
Assuntos
Placas Ósseas , Parafusos Ósseos , Fraturas do Fêmur/fisiopatologia , Fraturas do Fêmur/cirurgia , Fixação Interna de Fraturas/instrumentação , Modelos Biológicos , Cirurgia Assistida por Computador/métodos , Adulto , Fenômenos Biomecânicos/métodos , Cadáver , Simulação por Computador , Desenho Assistido por Computador , Análise de Falha de Equipamento/métodos , Fêmur/fisiopatologia , Fêmur/cirurgia , Humanos , Técnicas In Vitro , Masculino , Prognóstico , Desenho de Prótese , Resultado do TratamentoRESUMO
The reliability of patient-specific finite element (FE) modelling is dependent on the ability to provide repeatable analyses. Differences of inter-operator generated grids can produce variability in strain and stress readings at a desired location, which are magnified at the surface of the model as a result of the partial volume edge effects (PVEEs). In this study, a new approach is introduced based on an in-house developed algorithm which adjusts the location of the model's surface nodes to a consistent predefined threshold Hounsfield unit value. Three cadaveric human femora specimens were CT scanned, and surface models were created after a semi-automatic segmentation by three different experienced operators. A FE analysis was conducted for each model, with and without applying the surface-adjustment algorithm (a total of 18 models), implementing identical boundary conditions. Maximum principal strain and stress and spatial coordinates were probed at six equivalent surface nodes from the six generated models for each of the three specimens at locations commonly utilised for experimental strain guage measurement validation. A Wilcoxon signed-ranks test was conducted to determine inter-operator variability and the impact of the PVEE-adjustment algorithm. The average inter-operator difference in stress values was significantly reduced after applying the adjustment algorithm (before: 3.32 ± 4.35 MPa, after: 1.47 ± 1.77 MPa, p = 0.025). Strain values were found to be less sensitive to inter-operative variability (p = 0.286). In summary, the new approach as presented in this study may provide a means to improve the repeatability of subject-specific FE models of bone obtained from CT data.
Assuntos
Algoritmos , Fêmur/diagnóstico por imagem , Análise de Elementos Finitos , Tomografia Computadorizada por Raios X , Humanos , Modelos Biológicos , Reprodutibilidade dos Testes , Estresse MecânicoRESUMO
BACKGROUND: Closed reduction and percutaneous fixation with Kirschner wires (KWs) is the standard of care of pediatric supra-condylar humerus fractures (SCHFs). Failure modes leading to loss of reduction are not clear and have not been quantified. Multiple factors may weaken the KW-bone interface bonding conditions. To the best of our knowledge, the possible effect of this decrease on different KW configurations and fracture stability has never been studied. PURPOSE: To investigate the effect of bone-KW friction conditions on SCHF post-operative mechanical stability and to formulate clinical guidelines for KW configuration under different conditions. METHODS: Finite element-based model of a fixated SCHF was used to simulate structure stability for two lateral divergent versus crossed lateral and medial KW configurations under varying KW-bone friction conditions. RESULTS: Finite element simulations demonstrated that crossed KWs provide superior stability compared with the divergent configuration when KW-bone bonding is compromised. When KW-bone bonding conditions are adequate, crossed and divergent KW configurations provide similar, sufficient fracture stability. CONCLUSIONS: Under normal bone-implant interface conditions, the two diverging lateral KW configuration offers satisfactory mechanical stability and may be the preferred choice of SCHF fixation. When KW-bone bonding is suboptimal, as when one or more of the lateral KWs are re-drilled, addition of a medial KW should be considered in order to improve stability despite risk to ulnar nerve.
RESUMO
Intraoperative fluoroscopically based computed tomography, integrated with a navigation system, holds great potential for improving visualization and navigation in orthopedic procedures. However, a limited field of view generated by the fluoroscopically based computed tomography has imposed a serious limitation, especially for navigation-based procedures. The device presented in this article enables one to overcome the limitation of the small field of view. The device has been evaluated in vitro by five physicians and has been used successfully in one clinical case. In general, we have developed a simple, low-cost in-house device that helps overcome an intrinsic limitation of high-cost systems.
Assuntos
Fluoroscopia/instrumentação , Período Intraoperatório , Ortopedia/métodos , Cirurgia Assistida por Computador/instrumentação , Tomografia Computadorizada por Raios X/instrumentação , Adulto , Estudos de Viabilidade , Feminino , Fraturas Ósseas/cirurgia , Humanos , Ossos Pélvicos/lesõesRESUMO
Computational patient-specific modeling has the potential to yield powerful information for selection and planning of fracture treatments if it can be developed to yield results that are rapid, focused and coherent from a clinical perspective. In this study we introduce the utilization of a principal strain fixation ratio measure (SR) defined as the ratio of principal strains that develop in a fixated bone relative to the principal strains that develop in the same bone in an intact state. The SR field output variable is theoretically independent of load amplitude and also has a direct clinical interpretation with SR<1-a representing stress shielding and SR>1+b representing overstressed bone. A combined experimental and numerical study was performed with cadaveric proximal femora (n=6) intact and following fracture fixation to quantify the performance of the SR variable in terms of accuracy and sensitivity to uncertainties in density-elasticity relationships and load amplitude as model input variables. For a given axial compressive force the SR field output variable was found to be less sensitive to changes in density-elasticity relationships and the response function to be more accurate than strain values themselves; errors were reduced by 44% on comparing SR with strain in the fixated model. In addition, the experimental data confirmed the assumption that the SR values behave independent of load amplitude. The load independent behavior of SR and its direct clinical interpretation may ultimately provide an appropriate and easily understood comparative computational measure to choose between patient specific fracture fixation alternatives.
Assuntos
Fraturas do Fêmur/fisiopatologia , Fraturas do Fêmur/cirurgia , Fixação de Fratura , Modelos Biológicos , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos , Cadáver , Simulação por Computador , Elasticidade , Feminino , Análise de Elementos Finitos , Fixação de Fratura/estatística & dados numéricos , Humanos , Técnicas In Vitro , Pessoa de Meia-Idade , Estresse MecânicoRESUMO
PURPOSE: Understanding acetabular orientation is important in many orthopaedic procedures. Acetabular orientation, usually described by anteversion and abduction angles, has uncertain measurement variability in adult patients. The goals of this study are threefold: (1) to describe a new method for computing patient-specific abduction/anteversion angles from a single CT study based on the identification of anatomical landmarks and acetabular rim points; (2) to quantify the inaccuracies associated with landmark selection in computing the acetabular angles; and (3) to quantify the variability and symmetry of acetabular orientation. METHODS: A total of 25 CT studies from adult patients scanned for non-orthopaedic indications were retrospectively reviewed. The patients were randomly selected from the hospital's database. Inclusion criteria were adults 20-65 years of age. Acetabular landmark coordinates were identified by expert observers and tabulated in a spreadsheet. Two sets of calculations were done using the data: (1) computation of the abduction and anteversion for each patient, and (2) evaluation of the variability of measurements in the same individual by the same surgeon. The results were tabulated and summary statistics computed. RESULTS: This retrospective study showed that acetabular abduction and anteversion angles averaged 54 degrees and 17 degrees, respectively, in adults. A clinically significant intra-patient variability of >20 degrees was found. We also found that the right and left side rim plane orientation were significantly correlated, but were not always symmetric. CONCLUSION: A new method of computing patient-specific abduction and anteversion angles from a CT study of the anterior pelvic plane and the left and right acetabular rim planes was reliable and accurate. We found that the acetabular rim plane can be reliably and accurately computed from identified points on the rim. The novelty of this work is that angular measurements are performed between planes on a 3-D model rather than lines on 2-D projections, as was done in the past.
Assuntos
Acetábulo/diagnóstico por imagem , Interpretação de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Tomografia Computadorizada por Raios X/métodos , Acetábulo/cirurgia , Adulto , Idoso , Artroplastia de Quadril/métodos , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Adulto JovemRESUMO
BACKGROUND AND PURPOSE: Current urologic laparoscopic procedures include preservation of locoregional nerve fibers. The use of electrical coagulation is limited because of tissue conductance of current and heat production. While ultrasonic coagulation does not use electricity, heat is still produced. We designed an animal model to characterize the heat spread around ultrasonic devices and assess whether it is neurodestructive. MATERIALS AND METHODS: 10 rats were anesthetized; their skin was reflected, exposing the muscles. An ultrasonic probe was introduced into the tissue, and coagulation was performed for 10 seconds. Tissue temperature was measured using four thermocouples, at distances of 4, 8, 12, and 16 mm from the probes and in a circumferential manner. Thermal mapping of the probes was performed with an infrared camera. Further, four rats were anesthetized; the skin above their inner thighs was reflected bilaterally exposing the "nervus ischiadicus." Coagulation was performed in varying distances from the nerve on one side while the other served as control. One week later, the animals were sacrificed, and the nerves were obtained. Silver staining was used to assess the vitality of the axons. RESULTS: In distances of 4 to 8 mm from the device, temperatures as high as 81°C were recorded, and silver staining showed severe axonal damage. CONCLUSIONS: Although ultrasonic coagulation is efficient, local heat production may reach neurodestructive levels with a typical tissue distribution pattern. These features should be addressed during laparoscopic dissection and when considering nerve-sparing procedures.
Assuntos
Temperatura Alta , Laparoscopia/instrumentação , Laparoscopia/métodos , Modelos Animais , Fibras Nervosas/patologia , Ultrassom/instrumentação , Animais , Axônios/patologia , Masculino , Ratos , Ratos Sprague-DawleyRESUMO
INTRODUCTION: The removal of metal shrapnel in the sub-acute phase of casualty treatment requires the utmost accuracy in detection and removal, especially when there is proximity to major neurovascular structures. Inability to successfully locate and remove retained fragments may lead to a variety of complications due to fragment migration. In this study we prove the feasibility of a new technique which uses metal detector technology combined with a surgical navigation system, resulting in improved accuracy and decreased operating time. METHODS: In each of the experiments, 6 metal nuts were inserted into a dummy leg to simulate shrapnel wounds. Two major experiments were then conducted. Experiment 1 was a comparison of two methods: (a) localization of the nuts using surgical navigation alone, and (b) localization by means of metal detector technology combined with a surgical navigation system (StealthStation® TREON® plus). Experiment 2 employed the same two methods, but this time migration of the metal fragments was introduced. The localization time was measured from incision of the dummy skin to the moment the metal fragment was touched by the searching device. RESULTS: In experiment 1 the results showed no significant differences between the two approaches. In experiment 2 the new technique was found to significantly decrease the mean fragment localization time, taking 9.6 seconds (±7.2 seconds) as compared to 26.4 seconds (±13.8 seconds) when using the regular technique. CONCLUSION: Combining a metal detector probe and a surgical navigation system was found to significantly decrease operating time and increase the surgeon's confidence, especially in cases where migration of the metal fragment occurred during searching and extraction.