Ultrathin quantum light source with van der Waals NbOCl2 crystal.

Interlayer electronic coupling in two-dimensional materials enables tunable and emergent properties by stacking engineering. However, it also results in significant evolution of electronic structures and attenuation of excitonic effects in two-dimensional semiconductors as exemplified by quickly degrading excitonic photoluminescence and optical nonlinearities in transition metal dichalcogenides when monolayers are stacked into van der Waals structures. Here we report a van der Waals crystal, niobium oxide dichloride (NbOCl2), featuring vanishing interlayer electronic coupling and monolayer-like excitonic behaviour in the bulk form, along with a scalable second-harmonic generation intensity of up to three orders higher than that in monolayer WS2. Notably, the strong second-order nonlinearity enables correlated parametric photon pair generation, through a spontaneous parametric down-conversion (SPDC) process, in flakes as thin as about 46 nm. To our knowledge, this is the first SPDC source unambiguously demonstrated in two-dimensional layered materials, and the thinnest SPDC source ever reported. Our work opens an avenue towards developing van der Waals material-based ultracompact on-chip SPDC sources as well as high-performance photon modulators in both classical and quantum optical technologies1-4.

Disorder-tuned conductivity in amorphous monolayer carbon.

Correlating atomic configurations-specifically, degree of disorder (DOD)-of an amorphous solid with properties is a long-standing riddle in materials science and condensed matter physics, owing to difficulties in determining precise atomic positions in 3D structures1-5. To this end, 2D systems provide insight to the puzzle by allowing straightforward imaging of all atoms6,7. Direct imaging of amorphous monolayer carbon (AMC) grown by laser-assisted depositions has resolved atomic configurations, supporting the modern crystallite view of vitreous solids over random network theory8. Nevertheless, a causal link between atomic-scale structures and macroscopic properties remains elusive. Here we report facile tuning of DOD and electrical conductivity in AMC films by varying growth temperatures. Specifically, the pyrolysis threshold temperature is the key to growing variable-range-hopping conductive AMC with medium-range order (MRO), whereas increasing the temperature by 25 °C results in AMC losing MRO and becoming electrically insulating, with an increase in sheet resistance of 109 times. Beyond visualizing highly distorted nanocrystallites embedded in a continuous random network, atomic-resolution electron microscopy shows the absence/presence of MRO and temperature-dependent densities of nanocrystallites, two order parameters proposed to fully describe DOD. Numerical calculations establish the conductivity diagram as a function of these two parameters, directly linking microstructures to electrical properties. Our work represents an important step towards understanding the structure-property relationship of amorphous materials at the fundamental level and paves the way to electronic devices using 2D amorphous materials.

Ordered and tunable Majorana-zero-mode lattice in naturally strained LiFeAs.

Majorana zero modes (MZMs) obey non-Abelian statistics and are considered building blocks for constructing topological qubits1,2. Iron-based superconductors with topological bandstructures have emerged as promising hosting materials, because isolated candidate MZMs in the quantum limit have been observed inside the topological vortex cores3-9. However, these materials suffer from issues related to alloying induced disorder, uncontrolled vortex lattices10-13 and a low yield of topological vortices5-8. Here we report the formation of an ordered and tunable MZM lattice in naturally strained stoichiometric LiFeAs by scanning tunnelling microscopy/spectroscopy. We observe biaxial charge density wave (CDW) stripes along the Fe-Fe and As-As directions in the strained regions. The vortices are pinned on the CDW stripes in the As-As direction and form an ordered lattice. We detect that more than 90 per cent of the vortices are topological and possess the characteristics of isolated MZMs at the vortex centre, forming an ordered MZM lattice with the density and the geometry tunable by an external magnetic field. Notably, with decreasing the spacing of neighbouring vortices, the MZMs start to couple with each other. Our findings provide a pathway towards tunable and ordered MZM lattices as a platform for future topological quantum computation.

Engineering covalently bonded 2D layered materials by self-intercalation.

Two-dimensional (2D) materials1-5 offer a unique platform from which to explore the physics of topology and many-body phenomena. New properties can be generated by filling the van der Waals gap of 2D materials with intercalants6,7; however, post-growth intercalation has usually been limited to alkali metals8-10. Here we show that the self-intercalation of native atoms11,12 into bilayer transition metal dichalcogenides during growth generates a class of ultrathin, covalently bonded materials, which we name ic-2D. The stoichiometry of these materials is defined by periodic occupancy patterns of the octahedral vacancy sites in the van der Waals gap, and their properties can be tuned by varying the coverage and the spatial arrangement of the filled sites7,13. By performing growth under high metal chemical potential14,15 we can access a range of tantalum-intercalated TaS(Se)y, including 25% Ta-intercalated Ta9S16, 33.3% Ta-intercalated Ta7S12, 50% Ta-intercalated Ta10S16, 66.7% Ta-intercalated Ta8Se12 (which forms a Kagome lattice) and 100% Ta-intercalated Ta9Se12. Ferromagnetic order was detected in some of these intercalated phases. We also demonstrate that self-intercalated V11S16, In11Se16 and FexTey can be grown under metal-rich conditions. Our work establishes self-intercalation as an approach through which to grow a new class of 2D materials with stoichiometry- or composition-dependent properties.

Air-Stable Wafer-Scale Ferromagnetic Metallo-Carbon Nitride Monolayer.

The pursuit of robust, long-range magnetic ordering in two-dimensional (2D) materials holds immense promise for driving technological advances. However, achieving this goal remains a grand challenge due to enhanced quantum and thermal fluctuations as well as chemical instability in the 2D limit. While magnetic ordering has been realized in atomically thin flakes of transition metal chalcogenides and metal halides, these materials often suffer from air instability. In contrast, 2D carbon-based materials are stable enough, yet the challenge lies in creating a high density of local magnetic moments and controlling their long-range magnetic ordering. Here, we report a novel wafer-scale synthesis of an air-stable metallo-carbon nitride monolayer (MCN, denoted as MN4/CNx), featuring ultradense single magnetic atoms and exhibiting robust room-temperature ferromagnetism. Under low-pressure chemical vapor deposition conditions, thermal dehydrogenation and polymerization of metal phthalocyanine (MPc) on copper foil at elevated temperature generate a substantial number of nitrogen coordination sites for anchoring magnetic single atoms in monolayer MN4/CNx (where M = Fe, Co, and Ni). The incorporation of densely populating MN4 sites into monolayer MCN networks leads to robust ferromagnetism up to room temperature, enabling the observation of anomalous Hall effects with excellent chemical stability. Detailed electronic structure calculations indicate that the presence of high-density metal sites results in the emergence of spin-split d-bands near the Fermi level, causing a favorable long-range ferromagnetic exchange coupling through direct exchange interactions. Our work demonstrates a novel synthesis approach for wafer-scale MCN monolayers with robust room-temperature ferromagnetism and may shed light on practical electronic and spintronic applications.

Single-atom vibrational spectroscopy with chemical-bonding sensitivity.

Correlation of lattice vibrational properties with local atomic configurations in materials is essential for elucidating functionalities that involve phonon transport in solids. Recent developments in vibrational spectroscopy in a scanning transmission electron microscope have enabled direct measurements of local phonon modes at defects and interfaces by combining high spatial and energy resolution. However, pushing the ultimate limit of vibrational spectroscopy in a scanning transmission electron microscope to reveal the impact of chemical bonding on local phonon modes requires extreme sensitivity of the experiment at the chemical-bond level. Here we demonstrate that, with improved instrument stability and sensitivity, the specific vibrational signals of the same substitutional impurity and the neighbouring carbon atoms in monolayer graphene with different chemical-bonding configurations are clearly resolved, complementary with density functional theory calculations. The present work opens the door to the direct observation of local phonon modes with chemical-bonding sensitivity, and provides more insights into the defect-induced physics in graphene.

Systematic Absences of Optical Phonon Modes in Phonon Dispersion Measured by Electron Microscopy.

Phonon dispersion relations are widely used to elucidate the vibrational properties of materials. As an emerging technique, momentum-resolved vibrational spectroscopy in scanning transmission electron microscopy offers an unparalleled approach to explore q-dependent phonon behavior at local structures. In this study, we systematically investigate the phonon dispersion of monolayer graphene across several Brillouin zones (BZs) using momentum-resolved vibrational spectroscopy and find that the optical phonon signals vanish at the Γ points with indices (hk0) satisfying h+2k=3n (n denoted integers). Theoretical analysis reveals that the observed phenomena arise from the complete destructive interference of the scattered waves from different basis atoms. This observation, corroborated by the study of diamond, should be a general characteristic of materials composed of symmetrically equivalent pairs of the same elements. Moreover, our results emphasize the importance of multiple scattering in interpreting the vibrational signals in bulk materials. We demonstrate that the systematic absences and dynamic effects, which have not been much appreciated before, offer new insights into the experimental assessment of local vibrational properties of materials.

Atomic Origins of Enhanced Ferroelectricity in Nanocolumnar PbTiO3 /PbO Composite Thin Films.

Nanocomposite films hold great promise for multifunctional devices by integrating different functionalities within a single film. The microstructure of the precipitate/secondary phase is an essential element in designing composites' properties. The interphase strain between the matrix and secondary phase is responsible for strain-mediated functionalities, such as magnetoelectric coupling and ferroelectricity. However, a quantitative microstructure-dependent interphase strain characterization has been scarcely studied. Here, it is demonstrated that the PbTiO3 (PTO)/PbO composite system can be prepared in nano-spherical and nanocolumnar configurations by tuning the misfit strain, confirmed by a three-dimensional reconstructive microscopy technique. With the atomic resolution quantitative microscopy with a depth resolution of a few nanometers, it is discovered that the strained region in PTO is much larger and more uniform in nanocolumnar compared to nano-spherical composites, resulting in much enhanced ferroelectric properties. The interphase strain between PbO and PTO in the nanocolumnar structure leads to a giant c/a ratio of 1.20 (bulk value of 1.06), accompanied by a Ti polarization displacement of 0.48 Å and an effective ferroelectric polarization of 241.7 µC cm-2 , three times compared to the bulk value. The quantitative atomic-scale strain and polarization analysis on the interphase strain provides an important guideline for designing ferroelectric nanocomposites.

Probing a Defect-Site-Specific Electronic Orbital in Graphene with Single-Atom Sensitivity.

Visualization of individual electronic states ascribed to specific unoccupied orbitals at the atomic scale can reveal fundamental information about chemical bonding, but it is challenging since bonding often results in only subtle variations in the whole density of states. Here, we utilize atomic-resolution energy-loss near-edge fine structure (ELNES) spectroscopy to map out the electronic states attributed to specific unoccupied p_{z} orbital around a fourfold coordinated silicon point defect in graphene, which is further supported by theoretical calculations. Our results illustrate the power of atomic-resolution ELNES towards the probing of defect-site-specific electronic orbitals in monolayer crystals, providing insights into understanding the effect of chemical bonding on the local properties of defects in solids.

Printable two-dimensional superconducting monolayers.

Two-dimensional superconductor (2DSC) monolayers with non-centrosymmetry exhibit unconventional Ising pair superconductivity and an enhanced upper critical field beyond the Pauli paramagnetic limit, driving intense research interest. However, they are often susceptible to structural disorder and environmental oxidation, which destroy electronic coherence and provide technical challenges in the creation of artificial van der Waals heterostructures (vdWHs) for devices. Herein, we report a general and scalable synthesis of highly crystalline 2DSC monolayers via a mild electrochemical exfoliation method using flexible organic ammonium cations solvated with neutral solvent molecules as co-intercalants. Using NbSe2 as a model system, we achieved a high yield (>75%) of large-sized single-crystal monolayers up to 300 µm. The as-fabricated, twisted NbSe2 vdWHs demonstrate high stability, good interfacial properties and a critical current that is modulated by magnetic field when one flux quantum fits to an integer number of moiré cells. Additionally, formulated 2DSC inks can be exploited to fabricate wafer-scale 2D superconducting wire arrays and three-dimensional superconducting composites with desirable morphologies.

Synergistic boost of output power density and efficiency in In-Li-codoped SnTe.

We report enhanced thermoelectric performance of SnTe by further increasing its intrinsic high carrier concentration caused by Sn vacancies in contrast to the traditional method. Along with In2Te3 alloying, which results in an enhanced Seebeck coefficient, Li2Te is added to further increase the carrier concentration in order to maintain high electrical conductivity. Finally, a relatively high PF ave of ∼28 µW cm-1 K-2 in the range between 300 and 873 K is obtained in an optimized SnTe-based compound. Furthermore, nanoprecipitates with extremely high density are constructed to scatter phonons strongly, resulting in an ultralow lattice thermal conductivity of ∼0.45 W m-1 K-1 at 873 K. Given that the Z value is temperature dependent, the (ZT) eng and (PF) eng values are adopted to accurately predict the performance of this material. Taking into account the Joule and Thomson heat, output power density of ∼5.53 W cm-2 and leg efficiency of ∼9.6% are calculated for (SnTe)2.94(In2Te3)0.02-(Li2Te)0.045 with a leg length of 4 mm and cold- and hot-side temperatures of 300 and 870 K, respectively.

Accurate and Robust Calibration of the Uniform Affine Transformation Between Scan-Camera Coordinates for Atom-Resolved In-Focus 4D-STEM Datasets.

Accurate geometrical calibration between the scan coordinates and the camera coordinates is critical in four-dimensional scanning transmission electron microscopy (4D-STEM) for both quantitative imaging and ptychographic reconstructions. For atomic-resolved, in-focus 4D-STEM datasets, we propose a hybrid method incorporating two sub-routines, namely a J-matrix method and a Fourier method, which can calibrate the uniform affine transformation between the scan-camera coordinates using raw data, without a priori knowledge of the crystal structure of the specimen. The hybrid method is found robust against scan distortions and residual probe aberrations. It is also effective even when defects are present in the specimen, or the specimen becomes relatively thick. We will demonstrate that a successful geometrical calibration with the hybrid method will lead to a more reliable recovery of both the specimen and the electron probe in a ptychographic reconstruction. We will also show that, although the elimination of local scan position errors still requires an iterative approach, the rate of convergence can be improved, and the residual errors can be further reduced if the hybrid method can be firstly applied for initial calibration. The code is made available as a simple-to-use tool to correct affine transformations of the scan-camera coordinates in 4D-STEM experiments.

Flexoelectric Thin-Film Photodetectors.

The flexoelectric effect, which manifests itself as a strain-gradient-induced electrical polarization, has triggered great interest due to its ubiquitous existence in crystalline materials without the limitation of lattice symmetry. Here, we propose a flexoelectric photodetector based on a thin-film heterostructure. This prototypical device is demonstrated by epitaxial LaFeO3 thin films grown on LaAlO3 substrates. A giant strain gradient of the order of 106/m is achieved in LaFeO3 thin films, giving rise to an obvious flexoelectric polarization and generating a significant photovoltaic effect in the LaFeO3-based heterostructures with nanosecond response under light illumination. This work not only demonstrates a novel self-powered photodetector different from the traditional interface-type structures, such as the p-n and Schottky junctions but also opens an avenue to design practical flexoelectric devices for nanoelectronics applications.

An Anomalous Magneto-Optic Effect in Epitaxial Indium Selenide Layers.

Single-phonon modes offer potential applications in quantum phonon optics, but the phonon density of states of most materials consist of mixed contributions from coupled phonons. Here, using theoretical calculations and magneto-Raman measurements, we report two single-phonon vibration modes originating from the breathing and opposite out-of-plane vibrations of InSe layers. These single-phonon vibrations exhibit an anticorrelated scattering rotations of the polarization axis under an applied vertical magnetic field; such an anomalous magneto-optical behavior is due to the reverse bond polarizations of two quantum atomic vibrations, which induce different symmetry for the corresponding Raman selection rules. A 180° (+90° and -90°) integrated scattering rotation angle of two single-phonon modes was achieved when the magnetic field was swept from 0 to 6 T. This work demonstrates new ways to manipulate the magneto-optic effect through phonon polarity-based symmetry control and opens avenues for exploring single-phonon-vibration-based nanomechanical oscillators and magneto-phonon-coupled physics.

Ultrahigh Average ZT Realized in p-Type SnSe Crystalline Thermoelectrics through Producing Extrinsic Vacancies.

Crystalline SnSe has been revealed as an efficient thermoelectric candidate with outstanding performance. Herein, record-high thermoelectric performance is achieved among SnSe crystals via simply introducing a small amount of SnSe2 as a kind of extrinsic defect dopant. This excellent performance mainly arises from the largely enhanced power factor by increasing the carrier concentration high as 6.55 × 1019 cm-3, which was surprisingly promoted by introducing extrinsic SnSe2 even though pristine SnSe2 is an n-type conductor. The optimized carrier concentration promotes a deeper Fermi level and activates more valence bands, leading to an extraordinary room-temperature power factor ∼54 µW cm-1 K-2 through enlarging the band effective mass and Seebeck coefficient. As a result, on the basis of simultaneously depressed thermal conductivity induced from both Sn vacancies and SnSe2 microdomains, maximum ZT values ∼0.9-2.2 and excellent average ZT > 1.7 among the working temperature range are achieved in Na doped SnSe crystals with 2% extrinsic SnSe2. Our investigation illustrates new approaches on improving thermoelectric performance through introducing defect dopants, which might be well-implemented in other thermoelectric systems.

Band Sharpening and Band Alignment Enable High Quality Factor to Enhance Thermoelectric Performance in n-Type PbS.

Low-cost and earth-abundant PbS-based thermoelectrics are expected to be an alternative for PbTe, and have attracted extensive attentions from thermoelectric community. Herein, a maximum ZT (ZTmax) ≈ 1.3 at 923 K in n-type PbS is obtained through synergistically optimizing quality factor with Sn alloying and PbTe phase incorporation. It is found that Sn alloying in PbS can sharpen the conduction band shape to balance the contradictory interrelationship between carrier mobility and effective mass, accordingly, a peak power factor of ∼19.8 µWcm-1K-2 is achieved. Besides band sharpening, Sn alloying can also narrow the band gap of PbS so as to make the conduction band position between Pb0.94Sn0.06S and PbTe well aligned, which can benefit high carrier mobility. Therefore, incorporating the PbTe phase into the Pb0.94Sn0.06S matrix can not only favorably maintain the carrier mobility at ∼150 cm2V-1s-1 but also suppress the lattice thermal conductivity to ∼0.61 Wm-1K-1 in Pb0.94Sn0.06S-8%PbTe, which contributes to a largely enhanced quality factor. Consequently, an average ZT (ZTave) ≈ 0.72 in 300-923 K is achieved in Pb0.94Sn0.06S-8%PbTe that outperforms other n-type PbS-based thermoelectric materials.

Controlled Growth of 3R Phase Tantalum Diselenide and Its Enhanced Superconductivity.

Transition metal dichalcogenides (TMDs) have become a playground for exploring rich physical phenomena like superconductivity and charge-density-waves (CDW). Here, we report the synthesis of the atom-thin TaSe2 with a rare 3R phase and enhanced superconductivity. The 3R phase is achieved by an ambient pressure chemical vapor deposition (CVD) strategy and confirmed by the high-resolution aberration-corrected STEM. Low-temperature transport data reveal an enhanced superconducting transition temperature (Tc) of 1.6 K in the 3R-TaSe2, which undoubtedly breaks the traditional perception of TaSe2 crystal as a material with Tc close to 0 K. This work demonstrates the strength of ambient pressure CVD in the exploration of crystal polymorphism, highlights a decisive role of layer stacking order in the superconducting transition, and provides fresh insights on manipulating crystal structures to gain access to enhanced Tc.

Phase-Controlled Synthesis of Monolayer W1- x Rex S2 Alloy with Improved Photoresponse Performance.

Tuning bandgap and phases in the ternary 2D transition metal dichalcogenides (TMDs) alloys has opened up unexpected opportunities to engineer optoelectronic properties and explore potential applications. In this work, a salt-assisted chemical deposition vapor (CVD) growth strategy is reported for the creation of high-quality monolayer W1- x Rex S2 alloys to fulfill a readily phase control from 1H to DT by changing the ratio of Re and W precursors. The structures and chemical compositions of doping alloys are confirmed by combining atomic resolution scanning transmission electron microscopy-annular dark field imaging with energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy, matching well with the calculated results. The field-effect transistors (FETs) devices fabricated based on 1H-W0.9 Re0.1 S2 monolayer exhibit a n-type semiconducting behavior with the mobility of 0.4 cm2 V-1 s-1 . More importantly, the FETs show high-performance responsivity with a value of 17 µA W-1 in air, which is superior to that of monolayer CVD-grown WS2 . This work paves the way toward synthesizing monolayer ternary alloys with controlled phases for potential optoelectronic applications.

High-Energy Gain Upconversion in Monolayer Tungsten Disulfide Photodetectors.

Photodetectors usually operate in the wavelength range with photon energy above the bandgap of channel semiconductors so that incident photons can excite electrons from valence band to conduction band to generate photocurrent. Here, however, we show that monolayer WS2 photodetectors can detect photons with energy even lying 219 meV below the bandgap of WS2 at room temperature. With the increase of excitation wavelength from 620 to 680 nm, photoresponsivity varies from 551 to 59 mA/W. This anomalous phenomenon is ascribed to energy upconversion, which is a combination effect of one-photon excitation and multiphonon absorption through an intermediate state created most likely by sulfur divacancy with oxygen adsorption. These findings will arouse research interests on other upconversion optoelectronic devices, photovoltaic devices, for example, of monolayer transition metal dichalcogenides (TMDCs).

Realizing High Thermoelectric Performance in p-Type SnSe through Crystal Structure Modification.

The simple binary compound SnSe has been reported as a robust thermoelectric material for energy conversion by showing strong anharmonicity and multiple electronic valence bands. Herein, we report a record-high average ZT value of ∼1.6 at 300-793 K with maximum ZT values ranging from 0.8 at 300 K to 2.1 at 793 K in p-type SnSe crystals. This remarkable thermoelectric performance arises from the enhanced power factor and lowered lattice thermal conductivity through crystal structure modification via Te alloying. Our results elucidate that Te alloying increases the carrier mobility by making the bond lengths more nearly equal and sharpening the valence bands; meanwhile, the Seebeck coefficient remains large due to multiple valence bands. As a result, a record-high power factor of ∼55 µW cm-1 K-2 at 300 K is achieved. Additionally, Te alloying promotes Sn atom displacements, thus leading to a lower lattice thermal conductivity. Our conclusions are well supported by electron localization function calculations, the Callaway model, and structural characterization via aberration-corrected scanning transmission electron microscopy. Our approach of modifying crystal structures could also be applied in other low-symmetry thermoelectric materials and represents a new strategy to enhance thermoelectric performance.