Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 1 de 1
Filtrar
Mais filtros

Base de dados
Ano de publicação
Tipo de documento
Intervalo de ano de publicação
1.
Environ Toxicol Chem ; 36(9): 2543-2551, 2017 09.
Artigo em Inglês | MEDLINE | ID: mdl-28262978

RESUMO

A new polymeric biocide polyhexamethylene guanidine (PHMG) molybdate has been synthesized. The obtained cationic polymer has limited water solubility of 0.015 g/100 mL and is insoluble in paint solvents. The results of acute toxicity studies indicate moderate toxicity of PHMG molybdate, which has a median lethal dose at 48 h of 0.7 mg/L for Daphnia magna and at 96 h of 17 mg/L for Danio rerio (zebrafish) freshwater model organisms. Commercial ship paint was then modified by the addition of a low concentration of polymeric biocide 5% (w/w). The painted steel panels were kept in Dnipro River water for the evaluation of the dynamics of fouling biomass. After 129-d exposure, Bryozoa dominated in biofouling of tested substrates, forming 86% (649 g/m2 ) of the total biomass on control panel surfaces. However, considerably lower Bryozoa fouling biomass (15 g/m2 ) was detected for coatings containing PHMG molybdate. Dreissenidae mollusks were found to form 88% (2182 g/m2 ) of the fouling biomass on the control substrates after 228 d of exposure, whereas coatings containing PHMG molybdate showed a much lower biomass value of 23.6 g/m2 . The leaching rate of PHMG molybdate in water was found to be similar to rates for conventional booster biocides ranging from 5.7 µg/cm2 /d at the initial stage to 2.2 µg/cm2 /d at steady state. Environ Toxicol Chem 2017;36:2543-2551. © 2017 SETAC.


Assuntos
Incrustação Biológica , Desinfetantes/síntese química , Guanidinas/síntese química , Poliaminas/síntese química , Organismos Aquáticos , Desinfetantes/toxicidade , Guanidinas/toxicidade , Pintura , Poliaminas/toxicidade , Navios , Solubilidade , Aço
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA