RESUMO
Next-generation manufacturing (NGM) has evolved over the past decade to a point where large biopharmaceutical organizations are making large investments in the technology and considering implementation in clinical and commercial processes. There are many well-considered reasons to implement NGM. For the most part, organizations will not fund NGM unless the implementation benefits the funding organization by providing reduced costs, reduced time, or additional needed capabilities. Productivity improvements gained from continuous purification are shown in this work, which used a new system that fully integrates and automates several downstream unit operations of a biopharmaceutical process to provide flexibility and easy implementation of NGM. The equipment and automation needed to support NGM can be complicated and expensive. Biopharmaceutical Process Development considered two options as follows: (1) design its own NGM system or (2) buy a prebuilt system. PAK BioSolutions offers a turn-key automated and integrated system that can operate up to four continuous purification stages simultaneously, while maintaining a small footprint in the manufacturing plant. The system provides significant cost benefits (~10× lower) compared with the alternative-integration of many different pieces of equipment through a Distributed Control System that would require significant engineering time for design, automation, and integration. Integrated and Continuous Biomanufacturing can lead to significant reductions in facility size, reduced manufacturing costs, and enhanced product quality when compared with the traditional batch mode of operation. The system uses new automation strategies that robustly link unit operations. We present the optimized process fit, sterility and bioburden control strategy, and automation features (such as pH feedback control and in-line detergent addition), which enabled continuous operation of a 14-day end-to-end monoclonal antibody purification process at the clinical manufacturing scale.
Assuntos
Anticorpos Monoclonais , Produtos Biológicos , Reatores Biológicos , Análise Custo-Benefício , AutomaçãoRESUMO
The concept of continuous manufacturing has gained significant interest from the biopharmaceutical industry over the past several years. Benefits include increased manufacturing productivity, improved quality control, reduction in plant footprint, and more flexible management of facility capacity. There are several technologies currently available that enable continuous processing for chromatography and ultrafiltration. However, a single pass diafiltration design that meets the required small molecule clearance and has been integrated into a fully continuous monoclonal antibody purification process has not been previously published. Here, the theory and design of a 3-stage single pass diafiltration step is presented. Buffer exchange greater than 99.75% was experimentally demonstrated. Several critical design aspects were incorporated to minimize system complexity and reduce the buffer volume requirements. Lastly, single pass diafiltration was demonstrated in a pilot scale continuous process with uninterrupted flow from the bioreactor through the formulation step. This work illustrates the feasibility of incorporating a single pass diafiltration step into an end-to-end continuous protein purification process. This article is protected by copyright. All rights reserved.
RESUMO
The concept of continuous manufacturing has gained significant interest from the biopharmaceutical industry over the past several years. Benefits include increased manufacturing productivity, improved quality control, reduction in plant footprint, and more flexible management of facility capacity. There are several technologies currently available that enable continuous processing for chromatography and ultrafiltration. However, a single pass diafiltration design that meets the required small molecule clearance and has been integrated into a fully continuous monoclonal antibody purification process has not been previously published. Here, the theory and design of a 3-stage single pass diafiltration step is presented. Buffer exchange greater than 99.75% was experimentally demonstrated. Several critical design aspects were incorporated to minimize system complexity and reduce the buffer volume requirements. Lastly, single pass diafiltration was demonstrated in a pilot scale continuous process with uninterrupted flow from the bioreactor through the formulation step. This work illustrates the feasibility of incorporating a single pass diafiltration step into an end-to-end continuous protein purification process.
Assuntos
Anticorpos Monoclonais/isolamento & purificação , Biotecnologia/métodos , Filtração/métodos , Fatores Imunológicos/isolamento & purificação , Tecnologia Farmacêutica/métodos , Antígenos de HelmintosRESUMO
The changing landscape of the biopharmaceutical market is driving a paradigm shift toward continuous manufacturing. To date, integrated continuous bioprocessing has not been realized as enabling technologies are nascent. In this work, a fully integrated continuous process is successfully demonstrated from pilot scale bioreactor to drug substance. Comparable product quality is observed between the continuous process and a 500 L fed-batch conventional process. The continuous process generated material at a rate of 1 kg of purified mAb every 4 days, achieving a 4.6-fold increase in productivity compared to the fed-batch process A plant throughput analysis using BioSolve software shows that a fed-batch facility with 4 × 12 500 L stainless steel bioreactors and purification train of the corresponding scale can be replaced by a continuous facility consisting of 5 × 2000 L single use bioreactors and smaller purification train, with a cost reduction of 15%.