Fluids and Electrolytes under Confinement in Single-Digit Nanopores.

Confined fluids and electrolyte solutions in nanopores exhibit rich and surprising physics and chemistry that impact the mass transport and energy efficiency in many important natural systems and industrial applications. Existing theories often fail to predict the exotic effects observed in the narrowest of such pores, called single-digit nanopores (SDNs), which have diameters or conduit widths of less than 10 nm, and have only recently become accessible for experimental measurements. What SDNs reveal has been surprising, including a rapidly increasing number of examples such as extraordinarily fast water transport, distorted fluid-phase boundaries, strong ion-correlation and quantum effects, and dielectric anomalies that are not observed in larger pores. Exploiting these effects presents myriad opportunities in both basic and applied research that stand to impact a host of new technologies at the water-energy nexus, from new membranes for precise separations and water purification to new gas permeable materials for water electrolyzers and energy-storage devices. SDNs also present unique opportunities to achieve ultrasensitive and selective chemical sensing at the single-ion and single-molecule limit. In this review article, we summarize the progress on nanofluidics of SDNs, with a focus on the confinement effects that arise in these extremely narrow nanopores. The recent development of precision model systems, transformative experimental tools, and multiscale theories that have played enabling roles in advancing this frontier are reviewed. We also identify new knowledge gaps in our understanding of nanofluidic transport and provide an outlook for the future challenges and opportunities at this rapidly advancing frontier.

Age- and gender-dependent impact of titanium vertebral augmentation implants combined with cementing on subsequent vertebral fracture incidence: A comparative study with cementing alone.

PURPOSE: To compare vertebroplasty (VP) and kyphoplasty (KP) with a titanium implantable vertebral augmentation device (TIVAD) in symptomatic subsequent vertebral compression fracture (SVCF) incidence among osteoporotic vertebral compression fracture (OVCF) patients stratified by age and sex. METHODS: This retrospective cohort study involved OVCF patients aged ≥ 50, who underwent KP with TIVAD or VP in our hospital from 2014 to 2019. Subgroup analysis was conducted to evaluate the efficacy of KP with TIVAD and VP in patients stratified by age and sex. RESULTS: The study included 472 patients (VP group: 303; TIVAD group: 169). SVCF incidence rates were 15.2% for VP group and 14.8% for TIVAD group (P = 0.87). In subgroup analysis, TIVAD group showed significantly lower SVCF incidence than VP group in women aged 50-70 (2.1% vs 14.3%; P = 0.03) and had significantly higher SVCF incidence than VP group in women aged > 70 (24.2% vs 13.1%; P = 0.02). In men, adjacent SVCF incidence was significantly lower in TIVAD group than VP group (0% vs 14.1%; P = 0.03). CONCLUSION: Compared to VP, TIVAD is associated with lower symptomatic SVCF rate in men and younger women aged 50-70 but not in older women aged > 70. Age and gender may influence SVCF incidence. LEVEL OF EVIDENCE: Diagnostic: individual cross-sectional studies with consistently applied reference standard and blinding.

Crystallographic Effects of GaN Nanostructures in Photoelectrochemical Reaction.

Tuning the surface structure of the photoelectrode provides one of the most effective ways to address the critical challenges in artificial photosynthesis, such as efficiency, stability, and product selectivity, for which gallium nitride (GaN) nanowires have shown great promise. In the GaN wurtzite crystal structure, polar, semipolar, and nonpolar planes coexist and exhibit very different structural, electronic, and chemical properties. Here, through a comprehensive study of the photoelectrochemical performance of GaN photocathodes in the form of films and nanowires with controlled surface polarities we show that significant photoelectrochemical activity can be observed when the nonpolar surfaces are exposed in the electrolyte, whereas little or no activity is measured from the GaN polar c-plane surfaces. The atomic origin of this fundamental difference is further revealed through density functional theory calculations. This study provides guideline on crystal facet engineering of metal-nitride photo(electro)catalysts for a broad range of artificial photosynthesis chemical reactions.

Rectified and Salt Concentration Dependent Wetting of Hydrophobic Nanopores.

Nanopores lined with hydrophobic groups function as switches for water and all dissolved species, such that transport is allowed only when applying a sufficiently high transmembrane pressure difference or voltage. Here we show a hydrophobic nanopore system whose wetting and ability to transport water and ions is rectified and can be controlled with salt concentration. The nanopore we study contains a junction between a hydrophobic zone and a positively charged hydrophilic zone. The nanopore is closed for transport at low salt concentrations and exhibits finite current only when the concentration reaches a threshold value that is dependent on the pore opening diameter, voltage polarity and magnitude, and type of electrolyte. The smallest nanopore studied here had a 4 nm diameter and did not open for transport in any concentration of KCl or KI examined. A 12 nm nanopore was closed for all KCl solutions but conducted current in KI at concentrations above 100 mM for negative voltages and opened for both voltage polarities at 500 mM KI. Nanopores with a hydrophobic/hydrophilic junction can thus function as diodes, such that one can identify a range of salt concentrations where the pores transport water and ions for only one voltage polarity. Molecular dynamics simulations together with continuum models provided a multiscale explanation of the observed phenomena and linked the salt concentration dependence of wetting with an electrowetting model. Results presented are crucial for designing next-generation chemical and ionic separation devices as well as understanding fundamental properties of hydrophobic interfaces under nanoconfinement.

Development of a photoelectrochemically self-improving Si/GaN photocathode for efficient and durable H2 production.

Development of an efficient yet durable photoelectrode is of paramount importance for deployment of solar-fuel production. Here, we report the photoelectrochemically self-improving behaviour of a silicon/gallium nitride photocathode active for hydrogen production with a Faradaic efficiency approaching ~100%. By using a correlative approach based on different spectroscopic and microscopic techniques, as well as density functional theory calculations, we provide a mechanistic understanding of the chemical transformation that is the origin of the self-improving behaviour. A thin layer of gallium oxynitride forms on the side walls of the gallium nitride grains, via a partial oxygen substitution at nitrogen sites, and displays a higher density of catalytic sites for the hydrogen-evolving reaction. This work demonstrates that the chemical transformation of gallium nitride into gallium oxynitride leads to sustained operation and enhanced catalytic activity, thus showing promise for oxynitride layers as protective catalytic coatings for hydrogen evolution.

Research and Development Prospects for Sugarcane Industry in Vietnam.

Sugarcane is one of the most important industrial crops in Vietnam and covers a total of 127,000 hectares of plantation area. In the season 2020-2021, Vietnam has produced 0.763 million tons of sugar (accounting for 0.34% total world sugar production). A current sugarcane production of 7.498 million tons is being used mainly for sugar production for direct consumption, ethanol production, bio-electricity and fertilization. To ensure crop sustainability, various policies and plans have been implemented. Crop breeding and zoning improvement programme significantly influence sugarcane production and sugar yield. Over 25 years since the programme "one million ton of sugar" was promoted, Vietnam currently possesses 25 sugar mills with a total capacity of 110,000 tons of sugarcane per day. Major problems of sugarcane industry as well as research and development have been discussed in this review. Recent research and development work focused on the added values of co-products to ensure sustainability of the sugarcane industry. Molasses will be used for ethanol production, and bagasse is used as the biomass for the alternative energy. Sugarcane and sugar would be the main feedstocks for those bio-economy growths in Vietnam. To keep the sustainable development of the sugar industry, and to meet the demand of the food and non-food requirements, it is necessary to upgrade the sugar value chain through the adoption and the development of co-products of the sugar industry.

Confinement effects on the solvation structure of solvated alkali [correction] metal cations in a single-digit 1T-MoS2 nanochannel: A first-principles study.

Confinement plays an important role in determining ion transport in porous materials, which, in turn, may influence the performance of many energy storage and desalination devices. In this work, we combined density functional theory (DFT) with an implicit solvation model and ab initio molecular dynamics (AIMD) to investigate the effects of nanoconfinement on several solvated alkaline metal cations in a single-digit 1T-MoS2 nanochannel. Our DFT calculations with a solvation model indicated that cations with stronger hydration energy introduce a higher number of co-intercalated water molecules into the channel, consistent with early experimental observation obtained for MXene (2D transition metal carbide) channels. The predicted optimal water numbers for the cations were then used for AIMD simulations that explicitly include the effects of the solvent. When compared with the cations in bulk solution, our simulations showed that the hydration structure and coordination number (CN) of the solvated cations confined in the MoS2 channel can be significantly altered. We found that larger cations with weaker hydration energy (K+, Rb+, and Cs+) exhibited a distinctive CN decrease under confinement, while smaller cations (Li+ and Na+) retained a similar hydration shell as in the bulk solution. More specifically, the hydration shell of large cations (K+, Rb+, and Cs+) in MoS2 showed similar features of the coordination angle to the bulk, which suggests the partially broken hydration shell with no geometry change under confinement. Our simulations provided insights into the change of the hydration structure of alkaline metal cations under confinement, which may have important implications on their transport in the 1T-MoS2 channel.

Universal Electrochemical Synthesis of Mesoporous Chalcogenide Semiconductors: Mesoporous CdSe and CdTe Thin Films for Optoelectronic Applications.

Here we report the soft-template-assisted electrochemical deposition of mesoporous semiconductors (CdSe and CdTe). The resulting mesoporous films are stoichiometrically equivalent and contain mesopores homogeneously distributed over the entire surface. To demonstrate the versatility of the method, two block copolymers with different molecular weights are used, yielding films with pores of either 9 or 18 nm diameter. As a proof of concept, the mesoporous CdSe film-based photodetectors show a high sensitivity of 204 mW-1 cm2 at 680 nm wavelength, which is at least two orders of magnitude more sensitive than the bulk counterpart. This work presents a new synthesis route for nanostructured semiconductors with optical band gaps active in the visible spectrum.

Similarities and differences between potassium and ammonium ions in liquid water: a first-principles study.

Understanding ion solvation in liquid water is critical in optimizing materials for a wide variety of emerging technologies, including water desalination and purification. In this work, we report a systematic investigation and comparison of solvated K+ and NH4+ using first-principles molecular dynamics simulations. Our simulations reveal a strong analogy in the solvation properties of the two ions, including the size of the solvation shell as well as the solvation strength. On the other hand, we find that the local water structure in the ion solvation is significantly different; specifically, NH4+ yields a smaller number of water molecules and a more ordered water structure in the first solvation shell due to the formation of hydrogen bonds between the ion and water molecules. Finally, our simulations indicate that a comparable solvation strength of the two ions is a result of an interplay between the nature of ion-water interaction and number of water molecules that can be accommodated in the ion solvation shell.

Molecular polarizabilities as fingerprints of perturbations to water by ions and confinement.

Perturbations to water, both by ions and confining media, have been the focus of numerous experimental and theoretical studies. Yet, several open questions remain, including the extent to which such perturbations modify the structural and dielectric properties of the liquid. Here, we present a first-principles molecular dynamics study of alkali cations in water (Li+, Na+, and K+) as well as of water and LiCl and KCl solutions under confinement within carbon nanotubes (CNTs) of small diameter (1.1-1.5 nm). Our simulations support the view that the water structure is only modified locally in the presence of cations. We found that molecular polarizabilities are fingerprints of hydrogen bonding modifications, which occur at most up to the second solvation shell for all cations in bulk water. Under confinement, we found that the overall value of the molecular polarizability of water molecules near the surface is determined by the balance of two effects, which are quantitatively different in CNTs of different radii: the presence of broken hydrogen bonds at the surface leads to a decrease in the polarizabilities of water molecules, while the interaction with the CNT enhances polarizabilities. Interestingly, the reduction in dipole moments of interfacial water molecules under confinement is instead driven only by changes in the water structure and not by interfacial interactions. As expected, confinement effects on water molecular polarizabilities and dipole moments are more pronounced in the case of the 1.1 nm CNT.

Using Ultramicroporous Carbon for the Selective Removal of Nitrate with Capacitive Deionization.

The contamination of water resources with nitrate is a growing and significant problem. Here we report the use of ultramicroporous carbon as a capacitive deionization (CDI) electrode for selectively removing nitrate from an anion mixture. Through moderate activation, we achieve a micropore-size distribution consisting almost exclusively of narrow (<1 nm) pores that are well suited for adsorbing the planar, weakly hydrated nitrate molecule. Cyclic voltammetry measurements reveal an enhanced capacitance for nitrate when compared to chloride as well as significant ion sieving effects when sulfate is the only anion present. We measure high selectivities (S) of both nitrate over sulfate (SNO3/SO4 = 17.8 ± 3.6 at 0.6 V) and nitrate over chloride (SNO3/Cl = 6.1 ± 0.4 at 0.6 V) when performing a constant voltage CDI separation on 3.33 mM/3.33 mM/1.67 mM Cl/NO3/SO4 feedwater. These results are particularly encouraging considering that a divalent interferant was present in the feed. Using molecular dynamics simulations, we examine the solvation characteristics of these ions to better understand why nitrate is preferentially electrosorbed over sulfate and chloride.

Evaluation of the Anti-Trypanosomal Activity of Vietnamese Essential Oils, with Emphasis on Curcuma longa L. and Its Components.

Human African trypanosomiasis (HAT), known as sleeping sickness and caused by Trypanosoma brucei, is threatening low-income populations in sub-Saharan African countries with 61 million people at risk of infection. In order to discover new natural products against HAT, thirty-seven Vietnamese essential oils (EOs) were screened for their activity in vitro on Trypanosoma brucei brucei (Tbb) and cytotoxicity on mammalian cells (WI38, J774). Based on the selectivity indices (SIs), the more active and selective EOs were analyzed by gas chromatography. The anti-trypanosomal activity and cytotoxicity of some major compounds (isolated or commercial) were also determined. Our results showed for the first time the selective anti-trypanosomal effect of four EOs, extracted from three Zingiberaceae species (Curcuma longa, Curcuma zedoaria, and Zingiber officinale) and one Lauraceae species (Litsea cubeba) with IC50 values of 3.17 ± 0.72, 2.51 ± 1.08, 3.10 ± 0.08, and 2.67 ± 1.12 nL/mL respectively and SI > 10. Identified compounds accounted for more than 85% for each of them. Among the five major components of Curcuma longa EO, curlone is the most promising anti-trypanosomal candidate with an IC50 of 1.38 ± 0.45 µg/mL and SIs of 31.7 and 18.2 compared to WI38 and J774 respectively.

Modelling heterogeneous interfaces for solar water splitting.

The generation of hydrogen from water and sunlight offers a promising approach for producing scalable and sustainable carbon-free energy. The key of a successful solar-to-fuel technology is the design of efficient, long-lasting and low-cost photoelectrochemical cells, which are responsible for absorbing sunlight and driving water splitting reactions. To this end, a detailed understanding and control of heterogeneous interfaces between photoabsorbers, electrolytes and catalysts present in photoelectrochemical cells is essential. Here we review recent progress and open challenges in predicting physicochemical properties of heterogeneous interfaces for solar water splitting applications using first-principles-based approaches, and highlights the key role of these calculations in interpreting increasingly complex experiments.

Chiral-Selective Formation of 1D Polymers Based on Ullmann-Type Coupling: The Role of the Metallic Substrate.

The chiral-selective formation of 1D polymers from a prochiral molecule, namely, 6,12-dibromochrysene in dependence of the type of metal surface is demonstrated by a combined scanning tunneling microscopy and density functional theory study. Deposition of the chosen molecule on Au(111) held at room temperature leads to the formation of a 2D porous molecular network. Upon annealing at 200 °C, an achiral covalently linked polymer is formed on Au(111). On the other hand, a chiral Cu-coordinated polymer is spontaneously formed upon deposition of the molecules on Cu(111) held at room temperature. Importantly, it is found that the chiral-selectivity determines the possibility of obtaining graphene nanoribbons (GNRs). On Au(111), upon annealing at 350 °C or higher cyclo-dehydrogenation occurs transforming the achiral polymer into a GNR. In contrast, the chiral coordination polymer on Cu(111) cannot be converted into a GNR.

Synthesis and Bioactivity Evaluation of Novel 2-Salicyloylbenzofurans as Antibacterial Agents.

In order to discover new antibacterial agents, series of 2-salicyloylbenzofuran derivatives were designed, synthesized and evaluated for their antibacterial activities against three Gram-(+) strains (methicillin-sensitive Staphylococcus aureus (MSSA) ATCC 29213, methicillin-resistant Staphylococcus aureus (MRSA) ATCC 43300, and Streptococcus faecalis (S. faecalis) ATCC 29212) and one Gram-(-) strain (Escherichia coli (E. coli) ATCC 25922). The 2-salicyloylbenzofuran heterocycles were generated by Rap-Stoermer condensation of salicylaldehydes with phenacyl bromides and then converted to diverse O-ether derivatives by Williamson synthesis. The targeted products were screened for in vitro qualitative (zone of inhibition) and quantitative (MIC) antibacterial activities by agar well diffusion assay and agar dilution method. Amongst the compounds, those bearing carboxylic acid functional group were found to exhibit reasonable activity against Gram-(+) bacterial strains including S. faecalis, MSSA and MRSA with the most potent antibacterial agent 8h (MICs = 0.06-0.12 mM). Besides, the 2-salicyloylbenzofurans partly displayed inhibitory activity against MRSA with the best MICs = 0.14 mM (8f) and 0.12 mM (8h). Finally, the antibacterial results preliminarily suggested that the substituent bearing carboxylic acid group at salicyloyl-C2 and the bromine atoms on the benzofuran moiety seem to be the functionality necessary for antibacterial activities.

Nucling, a novel apoptosis-associated protein, controls mammary gland involution by regulating NF-κB and STAT3.

Postpartum mammary gland involution is the physiological process by which the lactating gland returns to its pre-pregnant state. In rodent models, the microenvironment of mammary gland involution is sufficient to induce enhanced tumor cell growth, local invasion, and metastasis. Therefore, a deeper understanding of the physiological regulation of involution may provide in-depth information on breast cancer therapy. We herein identified Nucling as an important regulator of involution of the mammary gland. A knock-out mouse model was generated and revealed that postpartum involution were impaired in mice lacking Nucling. Involution is normally associated with an increase in the activation of NF-κB and STAT3, which is required for the organized regulation of involution, and was observed in WT glands, but not in the absence of Nucling. Furthermore, the loss of Nucling led to the suppression of Calpain-1, IL-6, and C/EBPδ factors, which are known to be essential for normal involution. The number of M2 macrophages, which are crucial for epithelial cell death and adipocyte repopulation after weaning, was also reduced in Nucling-KO glands. Taken together, the results of the present study demonstrated that Nucling played an important role in mammary gland involution by regulating NF-κB and STAT3 signaling pathways.

Comparing Ullmann Coupling on Noble Metal Surfaces: On-Surface Polymerization of 1,3,6,8-Tetrabromopyrene on Cu(111) and Au(111).

The on-surface polymerization of 1,3,6,8-tetrabromopyrene (Br4 Py) on Cu(111) and Au(111) surfaces under ultrahigh vacuum conditions was investigated by a combination of scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations. Deposition of Br4 Py on Cu(111) held at 300 K resulted in a spontaneous debromination reaction, generating the formation of a branched coordination polymer network stabilized by C-Cu-C bonds. After annealing at 473 K, the C-Cu-C bonds were converted to covalent C-C bonds, leading to the formation of a covalently linked molecular network of short oligomers. In contrast, highly ordered self-assembled two-dimensional (2D) patterns stabilized by both Br-Br halogen and Br-H hydrogen bonds were observed upon deposition of Br4 Py on Au(111) held at 300 K. Subsequent annealing of the sample at 473 K led to a dissociation of the C-Br bonds and the formation of disordered metal-coordinated molecular networks. Further annealing at 573 K resulted in the formation of covalently linked disordered networks. Importantly, we found that the chosen substrate not only plays an important role as catalyst for the Ullmann reaction, but also influences the formation of different types of intermolecular bonds and thus, determines the final polymer network morphology. DFT calculations further support our experimental findings obtained by STM and XPS and add complementary information on the reaction pathway of Br4 Py on the different substrates.

Structure and dynamics of aqueous solutions from PBE-based first-principles molecular dynamics simulations.

Establishing an accurate and predictive computational framework for the description of complex aqueous solutions is an ongoing challenge for density functional theory based first-principles molecular dynamics (FPMD) simulations. In this context, important advances have been made in recent years, including the development of sophisticated exchange-correlation functionals. On the other hand, simulations based on simple generalized gradient approximation (GGA) functionals remain an active field, particularly in the study of complex aqueous solutions due to a good balance between the accuracy, computational expense, and the applicability to a wide range of systems. Such simulations are often performed at elevated temperatures to artificially "correct" for GGA inaccuracies in the description of liquid water; however, a detailed understanding of how the choice of temperature affects the structure and dynamics of other components, such as solvated ions, is largely unknown. To address this question, we carried out a series of FPMD simulations at temperatures ranging from 300 to 460 K for liquid water and three representative aqueous solutions containing solvated Na+, K+, and Cl- ions. We show that simulations at 390-400 K with the Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional yield water structure and dynamics in good agreement with experiments at ambient conditions. Simultaneously, this computational setup provides ion solvation structures and ion effects on water dynamics consistent with experiments. Our results suggest that an elevated temperature around 390-400 K with the PBE functional can be used for the description of structural and dynamical properties of liquid water and complex solutions with solvated ions at ambient conditions.

Comparing graphene growth on Cu(111) versus oxidized Cu(111).

The epitaxial growth of graphene on catalytically active metallic surfaces via chemical vapor deposition (CVD) is known to be one of the most reliable routes toward high-quality large-area graphene. This CVD-grown graphene is generally coupled to its metallic support resulting in a modification of its intrinsic properties. Growth on oxides is a promising alternative that might lead to a decoupled graphene layer. Here, we compare graphene on a pure metallic to graphene on an oxidized copper surface in both cases grown by a single step CVD process under similar conditions. Remarkably, the growth on copper oxide, a high-k dielectric material, preserves the intrinsic properties of graphene; it is not doped and a linear dispersion is observed close to the Fermi energy. Density functional theory calculations give additional insight into the reaction processes and help explaining the catalytic activity of the copper oxide surface.