RESUMO
The conversion of an azacalixpyridine-supported Mo(0) tricarbonyl into a Mo(VI) trioxo complex with dioxygen (O2) is investigated in homogeneous solution and in a molecular film adsorbed on Au(111) using a variety of spectroscopic and analytical methods. These studies in particular show that the dome-shaped carbonyl complex adsorbed on the metal surface has the ability to bind and activate gaseous oxygen, overcoming the so-called surface trans-effect. Furthermore, the rate of the conversion dramatically increases by irradiation with light. This observation is explained with the help of complementary DFT calculations and attributed to two different pathways, a thermal and a photochemical one. Based on the experimental and theoretical findings, a molecular mechanism for the conversion of the carbonyl to the oxo complex is derived.
RESUMO
The new transition-metal oxothiostannate [Ni(cyclen)(H2O)2]4[Sn10S20O4]·â¼13H2O (1) was prepared under hydrothermal conditions using Na4SnS4·14H2O as the precursor in the presence of [Ni(cyclen)(H2O)2](ClO4)2·H2O. Compound 1 comprises the [Sn10S20O4]8- anion constructed by the T3-type supertetrahedron [Sn10S20] and the [Sn10O4] anti-T2 cluster. Channels host the H2O molecules, and the sample can be reversibly dehydrated and rehydrated without significantly affecting the crystallinity of the material. 119Sn NMR spectroscopy of an aqueous solution of Na4SnS4·14H2O evidences that between 25 and 120 °C only [SnS4]4- and [Sn2S6]4- anions are present. In further experiments, hints were found that the formation of tin oxosulfide ions depends on the Ni2+-centered complexes. Compound 1 exhibits promising photocatalytic properties for the visible-light-driven hydrogen evolution reaction, with 18.7 mmol·g-1 H2 being evolved after 3 h.
RESUMO
The compound [Co4(C6H14N2)4(µ4-S2)2(µ2-S2)4] (I) and the pseudo-polymorph [Co4(C6H14N2)4(µ4-S2)2(µ2-S2)4]â 4 H2O (II) were obtained under solvothermal conditions (C6H14N2=trans-1,2-diaminocyclohexane). The structures feature S2(2-) ions exhibiting two different coordination modes. Terminal S2(2-) entities join two Co(3+) centres in a µ2 fashion, whereas the central S2(2-) groups connect four Co(3+) cations in a µ4-coordination mode. Compound II can be transformed into compound I by heat and storage over P2O5 and storing compound I in humid air yields in the formation of compound II. The intermolecular interactions investigated through Hirshfeld surface analysis reveal that besides Sâ â â H bonding close contacts are associated with relatively weak Hâ â â H interactions. A detailed DFT analysis of the bonding situation explains the long S-S bonds in the µ4-bridging S2(2-) units and the short bonds for the S2(2-) moieties in the µ2-connecting mode. Photocatalytic hydrogen evolution experiments demonstrate the potential of compound II as catalyst.
RESUMO
Synthesizing intermetallic phases containing noble metals often poses a challenge as the melting points of noble metals often exceed the boiling point of bismuth (1560 °C). Reactions in the solid state generally circumvent this issue but are extremely time consuming. A convenient method to overcome these obstacles is the co-reduction of metal salts in polyols, which can be performed within hours at moderate temperatures and even allows access to metastable phases. However, little attention has been paid to the formation mechanisms of intermetallic particles in polyol reductions. Identifying crucial reaction parameters and finding patterns are key factors to enable targeted syntheses and product design. Here, we chose metastable γ-BiPd as an example to investigate the formation mechanism from mixtures of metal salts in ethylene glycol and to determine critical factors for phase formation. The reaction was also monitored by inâ situ X-ray diffraction using synchrotron radiation. Products, intermediates and solutions were characterized by (inâ situ) X-ray diffraction, electron microscopy, and UV-Vis spectroscopy. In the first step of the reaction, elemental palladium precipitates. Increasing temperature induces the reduction of bismuth cations and the subsequent rapid incorporation of bismuth into the palladium cores, yielding the γ-BiPd phase.
RESUMO
The synthesis of intermetallic phases formed from elements with very different melting points is often time and energy consuming, and in extreme cases the evaporation of a reactant may even prevent formation completely. An alternative, facile synthesis approach is the reduction of metal salts in the polyol process, which requires only moderate temperatures and short reaction times. In addition, the starting materials for this procedure are readily available and do not require any special treatment to remove or prevent passivation layers, for example. Although the formation of intermetallic particles via the polyol process is an established method, little attention has been paid to the mechanism behind it. However, it is precisely a deeper understanding of the underlying mechanisms that would enable better and more targeted synthesis planning and product design. Taking the well-known formation of Bi2Rh particles from Bi(NO3)3 and various rhodium salts in ethylene glycol as an example, we studied the chemical process in detail. We investigated the effects of anion type and pH on the polyol reaction. The reaction was also probed by in situ X-ray diffraction using synchrotron radiation. Products, intermediates and solutions were characterized by X-ray and electron diffraction, electron microscopy and optical spectroscopy. In the first step, co-reduction of the metal cations leads to BiRh. Only with increasing reaction temperature, the remaining bismuth cations in the solution are reduced and incorporated into the BiRh particles, leading to a gradual transition from BiRh to α-Bi2Rh.
RESUMO
Molecular metal oxides often adopt common structural frameworks (i.e. archetypes), many of them boasting impressive structural robustness and stability. However, the ability to adapt and to undergo transformations between different structural archetypes is a desirable material design feature offering applicability in different environments. Using systems thinking approach that integrates synthetic, analytical and computational techniques, we explore the transformations governing the chemistry of polyoxovanadates (POVs) constructed of arsenate and vanadate building units. The water-soluble salt of the low nuclearity polyanion [V6As8O26]4- can be effectively used for the synthesis of the larger spherical (i.e. kegginoidal) mixed-valent [V12As8O40]4- precipitate, while the novel [V10As12O40]8- POVs having tubular cyclic structures are another, well soluble product. Surprisingly, in contrast to the common observation that high-nuclearity polyoxometalate (POM) clusters are fragmented to form smaller moieties in solution, the low nuclearity [V6As8O26]4- anion is in situ transformed into the higher nuclearity cluster anions. The obtained products support a conceptually new model that is outlined in this article and that describes a continuous evolution between spherical and cyclic POV assemblies. This new model represents a milestone on the way to rational and designable POV self-assemblies.
RESUMO
The processes occurring during the early stages of the formation of crystalline solids are not well understood thus preventing the rational synthesis of new solids. The investigation of the structure-forming processes is an enormous challenge for both analytical and theoretical methods because very small particles or aggregates with different chemical composition and different sizes must be probed, both before and during nucleation. Furthermore, these precursors are present in a complex and dynamic equilibrium. This Review gives a survey of the in-situ methods available for the study of the early stages of crystallization of solids and how they can help in the synthesis of metastable polymorphs, of transient intermediates, and/or precursors displaying new or improved properties. Examples of actual research demonstrate the necessity and potentials but also the limitations of in-situ monitoring of the formation of crystalline solids.
RESUMO
Intermetallic phases are usually obtained by crystallization from the melt. However, phases containing elements with widely different melting and boiling points, as well as nanoparticles, which provide a high specific surface area, are hardly accessible via such a high-temperature process. The polyol process is one option to circumvent these obstacles by using a solution-based approach at moderate temperatures. In this study, the formation of Bi2Ir nanoparticles in a microwave-assisted polyol process was investigated. Solutions were analyzed using UV-Vis spectroscopy and the reaction was tracked with synchrotron-based in situ powder X-ray diffraction (PXRD). The products were characterized by PXRD and high-resolution transmission electron microscopy. Starting from Bi(NO3)3 and Ir(OAc)3, the new suboxide Bi4Ir2O forms as an intermediate phase at about 160 °C. Its structure was determined by a combination of PXRD and quantum-chemical calculations. Bi4Ir2O decomposes in vacuum at about 250 °C and is reduced to Bi2Ir by hydrogen at 150 °C. At about 240 °C, the polyol process leads to the immediate reduction of the two metal-containing precursors and crystallization of Bi2Ir nanoparticles.
RESUMO
The new inorganic-organic hybrid compound (dienH2)Cu2Sn2S6 (dien = diethylenetriamine) was synthesized under solvothermal conditions. It crystallizes in the tetragonal space group I4m2 with a = 7.8793(3) A, c = 24.9955(15) A, and V = 1551.80(13) A(3). The structure consists of anionic [Cu2Sn2S6](2-) layers extending in the (001) plane and protonated amine molecules as charge compensating ions sandwiched between the layers. The layered [Cu2Sn2S6](2-) anion is composed of a single layer of edge-sharing CuS4 tetrahedra which is joined above and below to straight chains constructed by corner-sharing SnS4 tetrahedra. The material is a semiconductor with an optical band gap of 1.51 eV. More interestingly, preliminary results demonstrate that the compound exhibits photoconductive properties with an increase of the conductivity by a factor of 3 when irradiated with UV light. Upon heating in an inert atmosphere the compound starts to decompose at about 256 degrees C.