Long-term drought effects on the thermal sensitivity of Amazon forest trees.

The continued functioning of tropical forests under climate change depends on their resilience to drought and heat. However, there is little understanding of how tropical forests will respond to combinations of these stresses, and no field studies to date have explicitly evaluated whether sustained drought alters sensitivity to temperature. We measured the temperature response of net photosynthesis, foliar respiration and the maximum quantum efficiency of photosystem II (Fv /Fm ) of eight hyper-dominant Amazonian tree species at the world's longest-running tropical forest drought experiment, to investigate the effect of drought on forest thermal sensitivity. Despite a 0.6°C-2°C increase in canopy air temperatures following long-term drought, no change in overall thermal sensitivity of net photosynthesis or respiration was observed. However, photosystem II tolerance to extreme-heat damage (T50 ) was reduced from 50.0 ± 0.3°C to 48.5 ± 0.3°C under drought. Our results suggest that long-term reductions in precipitation, as projected across much of Amazonia by climate models, are unlikely to greatly alter the response of tropical forests to rising mean temperatures but may increase the risk of leaf thermal damage during heatwaves.

Applications of algae to obtain healthier meat products: A critical review on nutrients, acceptability and quality.

Meat constitutes one the main protein sources worldwide. However, ethical and health concerns have limited its consumption over the last years. To overcome this negative impact, new ingredients from natural sources are being applied to meat products to obtain healthier proteinaceous meat products. Algae is a good source of unsaturated fatty acids, proteins, essential amino acids, and vitamins, which can nutritionally enrich several foods. On this basis, algae have been applied to meat products as a functional ingredient to obtain healthier meat-based products. This paper mainly reviews the bioactive compounds in algae and their application in meat products. The bioactive ingredients present in algae can give meat products functional properties such as antioxidant, neuroprotective, antigenotoxic, resulting in healthier foods. At the same time, algae addition to foods can also contribute to delay microbial spoilage extending shelf-life. Additionally, other algae-based applications such as for packaging materials for meat products are being explored. However, consumers' acceptance for new products (particularly in Western countries), namely those containing algae, not only depends on their knowledge, but also on their eating habits. Therefore, it is necessary to further explore the nutritional properties of algae-containing meat products to overcome the gap between new meat products and traditional products, so that healthier algae-containing meat can occupy a significant place in the market.

Combining high pressure and electric fields towards Nannochloropsis oculata eicosapentaenoic acid-rich extracts.

Nannochloropsis oculata is naturally rich in eicosapentaenoic acid (EPA). To turn this microalga into an economically viable source for commercial applications, extraction efficiency must be achieved. Pursuing this goal, emerging technologies such as high hydrostatic pressure (HHP) and moderate electric fields (MEF) were tested, aiming to increase EPA accessibility and subsequent extraction yields. The innovative approach used in this study combined these technologies and associated tailored, less hazardous different solvent mixtures (SM) with distinct polarity indexes. Although the classical Folch SM with chloroform: methanol (PI 4.4) provided the highest yield concerning total lipids (166.4 mglipid/gbiomass), diethyl ether: ethanol (PI 3.6) presented statistically higher values in terms of EPA per biomass, corresponding to 1.3-fold increase. When SM were used in HHP and MEF, neither technology independently improved EPA extraction yields, although the sequential combination of technologies did result in 62% increment in EPA extraction. Overall, the SM and extraction methodologies tested (HHP-200 MPa, 21 °C, 15 min, followed by MEF processing at 40 °C, 15 min) enabled increased EPA extraction yields from wet N. oculata biomass. These findings are of high relevance for the food and pharmaceutical industries, providing viable alternatives to the "classical" extraction methodologies and solvents, with increased yields and lower environmental impact. KEY POINTS: • Et2O: EtOH is a less toxic and more efficient alternative to Folch solvent mixture • HHP or MEF per se was not able to significantly increase EPA extraction yield • Combinations of HHP and MEF technologies increased both lipids and EPA yields.

High Hydrostatic Pressure in the Modulation of Enzymatic and Organocatalysis and Life under Pressure: A Review.

The interest in high hydrostatic pressure (HHP) is mostly focused on the inactivation of deleterious enzymes, considering the quality-related issues associated with enzymes in foods. However, more recently, HHP has been increasingly studied for several biotechnological applications, including the possibility of carrying out enzyme-catalyzed reactions under high pressure. This review aims to comprehensively present and discuss the effects of HHP on the kinetic catalytic action of enzymes and the equilibrium of the reaction when enzymatic reactions take place under pressure. Each enzyme can respond differently to high pressure, mainly depending on the pressure range and temperature applied. In some cases, the enzymatic reaction remains significantly active at high pressure and temperature, while at ambient pressure it is already inactivated or possesses minor activity. Furthermore, the effect of temperature and pressure on the enzymatic activity indicated a faster decrease in activity when elevated pressure is applied. For most cases, the product concentration at equilibrium under pressure increased; however, in some cases, hydrolysis was preferred over synthesis when pressure increased. The compiled evidence of the effect of high pressure on enzymatic activity indicates that pressure is an effective reaction parameter and that its application for enzyme catalysis is promising.

Structural and Physicochemical Properties of Starch from Rejected Chestnut: Hydrothermal and High-Pressure Processing Dependence.

The quality standards for the export of chestnuts generate large quantities of rejected fruits, which require novel processing technologies for their safe industrial utilization. This study aimed to investigate the impact of high-pressure processing (HPP) and hydrothermal treatments (HT) on the physicochemical properties of rejected chestnut starch. Chestnuts were treated by HPP at 400, 500, and 600 MPa for 5 min and HT at 50 °C for 45 min. In general, all HPP treatments did not induce starch gelatinization, and their granules preserved the integrity and Maltese-cross. Moreover, starch granules' size and resistant starch content increased with the intensity of pressure. Native and HT chestnut starches were the most susceptible to digestion. HPP treatments did not affect the C-type crystalline pattern of native starch, but the crystalline region was gradually modified to become amorphous. HPP-600 MPa treated starch showed modified pasting properties and exhibited the highest values of peak viscosity. This study demonstrates for the first time that after HPP-600 MPa treatment, a novel chestnut starch gel structure is obtained. Moreover, HPP treatments could increase the slow-digesting starch, which benefits the development of healthier products. HPP can be considered an interesting technology to obtain added-value starch from rejected chestnut fruits.

High-Pressure-Based Strategies for the Inactivation of Bacillus subtilis Endospores in Honey.

Honey is a value-added product rich in several types of phenolic compounds, enzymes, and sugars recently explored in biomedical and food applications. Nevertheless, even though it has a low water activity (aW ≈ 0.65) that hinders the development of pathogenic and spoilage microorganisms, it is still prone to contamination by pathogenic microorganisms (vegetative and spores) and may constitute harm to special groups, particularly by immunosuppressed people and pregnant women. Thus, an efficient processing methodology needs to be followed to ensure microbial safety while avoiding 5-hydroxymethylfurfural (HMF) formation and browning reactions, with a consequent loss of biological value. In this paper, both thermal (pressure-assisted thermal processing, PATP) and nonthermal high-pressure processing (HPP), and another pressure-based methodology (hyperbaric storage, HS) were used to ascertain their potential to inactivate Bacillus subtilis endospores in honey and to study the influence of aW on the inactivation on this endospore. The results showed that PATP at 600 MPa/15 min/75 °C of diluted honey (52.9 °Brix) with increased aW (0.85 compared to ≈0.55, the usual honey aW) allowed for inactivating of at least 4.0 log units of B. subtilis spores (to below detection limits), while HS and HPP caused neither the germination nor inactivated spores (i.e., there was neither a loss of endospore resistance after heat shock nor endospore inactivation as a consequence of the storage methodology). PATP of undiluted honey even at harsh processing conditions (600 MPa/15 min/85 °C) did not impact the spore load. The results for diluted honey open the possibility of its decontamination by spores' inactivation for medical and pharmaceutical applications.

Hyperbaric storage at room like temperatures as a possible alternative to refrigeration: evolution and recent advances.

From 2012, the preservation of food products under pressure has been increasingly studied and the knowledge acquired has enlarged since several food products have been studied at different storage conditions. This new food preservation methodology concept called Hyperbaric Storage (HS) has gain relevance due to its potential as a replacement or an improvement to the conventional cold storage processes, such as the traditional refrigeration (RF), or even frosting, from the energetic savings to the reduction of the carbon foot-print. Briefly, HS is capable to inhibit the microbial proliferation or its inactivation which results in the extension of the shelf-life of several food products when compared to RF. Moreover, the overall quality parameters seem not to be affected by HS, being the differences detected on samples over storage similar to lower when compared to the ones stored at RF. This review paper aims to gather data from all studies carried out so far regarding HS performance, mainly at room temperature on fruit juices, meat and fisheries, as well on dairy products and ready-to-eat meals. The HS advantages as a new food preservation methodology are presented and explained, being also discussed the industrial viability and environmental impact of this methodology, as well its limitations.

Role of Honey in Advanced Wound Care.

Honey is a natural product rich in several phenolic compounds, enzymes, and sugars with antioxidant, anticarcinogenic, anti-inflammatory, and antimicrobial potential. Indeed, the development of honey-based adhesives for wound care and other biomedical applications are topics being widely investigated over the years. Some of the advantages of the use of honey for wound-healing solutions are the acceleration of dermal repair and epithelialization, angiogenesis promotion, immune response promotion and the reduction in healing-related infections with pathogenic microorganisms. This paper reviews the main role of honey on the development of wound-healing-based applications, the main compounds responsible for the healing capacity, how the honey origin can influence the healing properties, also highlighting promising results in in vitro and in vivo trials. The challenges in the use of honey for wound healing are also covered and discussed. The delivery methodology (direct application, incorporated in fibrous membranes and hydrogels) is also presented and discussed.

Effect of high pressure pre-treatment on raw ewes' milk and on subsequently produced cheese throughout ripening.

BACKGROUND: Raw ewe's milk, as used to manufacture Serra da Estrela Protected Designation of Origin cheese, was pre-treated by high pressure processing (HPP), using previously optimized conditions (121 MPa for 30 min), aiming to evaluate its effect on milk technological properties for subsequent cheese production, namely the impact on resulting curd, whey and cheese throughout ripening. RESULTS: The cheese yield increased 10.4% as a result of milk pre-treated by HPP, which also yielded inactivation of beneficial microbial groups. After 60 days of ripening, both treated and control cheeses showed no significant differences (P ≥ 0.05) with respect to quantified microbial load or basic physicochemical quality parameters. CONCLUSION: HPP appears to be a promising non-thermal treatment for ewes' milk to inactivate contaminant bacteria but with no negative effect on lactic acid bacteria, which is very important for the unique characteristics of Serra da Estrela cheese. © 2020 Society of Chemical Industry.

Conventional and emergent technologies for honey processing: A perspective on microbiological safety, bioactivity, and quality.

Honey is a natural food of worldwide economic importance. Over the last decades, its potential for food, medical, cosmetical, and biotechnological applications has been widely explored. One of the major safety issues regarding such applications is its susceptibility to being contaminated with bacterial and fungi spores, including pathogenic ones, which may impose a hurdle to its consumption in a raw state. Another factor that makes this product particularly challenging relies on its high sugar content, which will lead to the formation of hydroxymethylfurfural (HMF) when heated (due to Maillard reactions). Moreover, honey's bioactivity is known to be affected when it goes through thermal processing due to its unstable and thermolabile components. Therefore, proper food processing methodologies are of utmost importance not only to ensure honey safety but also to provide a high-quality product with low content of HMF and preserved biological properties. As so, emerging food processing technologies have been employed to improve the safety and quality of raw honey, allowing, for example, to reduce/avoid the exposure time to high processing temperatures, with consequent impact on the formation of HMF. This review aims to gather the literature available regarding the use of conventional and emergent food processing technologies (both thermal and nonthermal food processing technologies) for honey decontamination, preservation/enhancement of honey biological activity, as well as the sensorial attributes.

Non-thermal approach to Listeria monocytogenes inactivation in milk: The combined effect of high pressure, pediocin PA-1 and bacteriophage P100.

Non-thermal food processing and replacement of chemical additives by natural antimicrobials are promising trends in the food industry. The objective of the present work was to evaluate the effect of a process which combines mild high hydrostatic pressure - HHP (200 and 300 MPa, 5 min, 10 °C), phage Listex™ P100 and the bacteriocin pediocin PA-1 as a new non-thermal process for destruction of Listeria monocytogenes (104 CFU mL-1 or 107 CFU mL-1) in milk. For inoculum levels of 104 CFU mL-1, HHP combined with phage P100 eliminated L. monocytogenes immediately after pressurization. When L. monocytogenes was inoculated at levels of 107 CFU mL-1, a synergistic effect between phage P100, pediocin PA-1 and HHP (300 MPa) on the inactivation of L. monocytogenes was observed during storage of milk at 4 °C. For non-pressure treated samples inoculated with phage or pediocin or both, L. monocytogenes counts decreased immediately after biocontrol application, but regrowth was observed in a few samples during storage. Phage particles were stable during refrigerated storage for seven days while pediocin PA-1 remained stable only during three days. Further studies will have to be performed to validate the findings of this work in specific applications (e.g. production of raw milk cheese).

Effects of high-pressure processing on fungi spores: Factors affecting spore germination and inactivation and impact on ultrastructure.

Food contamination with heat-resistant fungi (HRF), and their spores, is a major issue among fruit processors, being frequently found in fruit juices and concentrates, among other products, leading to considerable economic losses and food safety issues. Several strategies were developed to minimize the contamination with HRF, with improvements from harvesting to the final product, including sanitizers and new processing techniques. Considering consumers' demands for minimally processed, fresh-like food products, nonthermal food-processing technologies, such as high-pressure processing (HPP), among others, are emerging as alternatives to the conventional thermal processing techniques. As no heat is applied to foods, vitamins, proteins, aromas, and taste are better kept when compared to thermal processes. Nevertheless, HPP is only able to destroy pathogenic and spoilage vegetative microorganisms to levels of pertinence for food safety, while bacterial spores remain. Regarding HRF spores (both ascospores and conidiospores), these seem to be more pressure-sensible than bacterial spores, despite a few cases, such as the ascospores of Byssochlamys spp., Neosartorya spp., and Talaromyces spp. that are resistant to high pressures and high temperatures, requiring the combination of both variables to be inactivated. This review aims to cover the literature available concerning the effects of HPP at room-like temperatures, and its combination with high temperatures, and high-pressure cycling, to inactivate fungi spores, including the main factors affecting spores' resistance to high-pressure, such as pH, water activity, nutritional composition of the food matrix and ascospore age, as well as the changes in the spore ultrastructure, and the parameters to consider regarding their inactivation by HPP.

Enhanced control of Bacillus subtilis endospores development by hyperbaric storage at variable/uncontrolled room temperature compared to refrigeration.

The effect of hyperbaric storage on Bacillus subtilis endospores, as a new food preservation methodology with potential to replace the conventional refrigeration processes, was assessed and compared to refrigeration. To do so, three different matrices (McIlvaine buffer, carrot juice and brain-heart infusion broth, BHI-broth) were inoculated with B. subtilis endospores and stored at 25, 50 and 100 MPa at variable/uncontrolled room temperature (18-23 °C), under refrigeration (4 °C), and room temperature at atmospheric pressure (0.1 MPa), up to 60 days. Two different quantification procedures were performed to assay both vegetative and endospores (unheated samples) and endospores (heated samples), to assess germination under pressure. The results showed that hyperbaric storage yielded pronounced endospore loads reductions in carrot juice and BHI-broth at 50 and 100 MPa, while in McIlvaine buffer, lower endospore loads reductions were observed. At 25 MPa, the endospores germinated and outgrew in carrot juice. Under refrigeration conditions, both carrot juice and BHI-broth underwent endospore germination and outgrowth after 60 and 9 days of storage, respectively, while in McIlvaine buffer there were no endospore outgrowth. These results suggest that hyperbaric storage at room temperature might not only be a feasible preservation procedure regarding endospores, but also that the food product (matrix characteristics) seems to influence the microbial inactivation that occurs during hyperbaric storage.

Optimization of ultrasound-assisted extraction of phenolic compounds from grapefruit (Citrus paradisi Macf.) leaves via D-optimal design and artificial neural network design with categorical and quantitative variables.

BACKGROUND: The extraction of phenolic compounds from grapefruit leaves assisted by ultrasound-assisted extraction (UAE) was optimized using response surface methodology (RSM) by means of D-optimal experimental design and artificial neural network (ANN). For this purpose, five numerical factors were selected: ethanol concentration (0-50%), extraction time (15-60 min), extraction temperature (25-50 °C), solid:liquid ratio (50-100 g L-1 ) and calorimetric energy density of ultrasound (0.25-0.50 kW L-1 ), whereas ultrasound probe horn diameter (13 or 19 mm) was chosen as categorical factor. RESULTS: The optimized experimental conditions yielded by RSM were: 10.80% for ethanol concentration; 58.52 min for extraction time; 30.37 °C for extraction temperature; 52.33 g L-1 for solid:liquid ratio; 0.457 kW L-1 for ultrasonic power density, with thick probe type. Under these conditions total phenolics content was found to be 19.04 mg gallic acid equivalents g-1 dried leaf. CONCLUSION: The same dataset was used to train multilayer feed-forward networks using different approaches via MATLAB, with ANN exhibiting superior performance to RSM (differences included categorical factor in one model and higher regression coefficients), while close values were obtained for the extraction variables under study, except for ethanol concentration and extraction time. © 2018 Society of Chemical Industry.

Analysis of risk factors and diseases associated with atherosclerosis in the progression of carotid artery stenosis.

OBJECTIVE: The objective of this study was to analyze the roles of demographic, clinical, and laboratory factors on the progression of atherosclerotic stenosis in carotid bifurcation. It was based on prospective information from records entered on a specific application form for follow-up outpatients at a tertiary university service. METHODS: Consecutive symptomatic and asymptomatic patients (n = 210) who had undergone more than one carotid duplex scan but no surgical intervention were selected for the analysis. The patients were divided into two groups: patients whose duplex scans did not show bilateral progression of carotid stenosis and patients with carotid stenosis progression of <50%, 50%-69%, or >70%. Clinical and demographic parameters were compared between groups. RESULTS: Group II levels of plasma urea (51.6 ± 27.8 mg/dl) and fibrinogen (493.2 ± 113.3 mg/dl) were higher than the Group I levels (43.0 ± 14.9 mg/dl and 441.3 ± 106.7 mg/dl, respectively) with statistical significance (p urea = 0.013 and p fibrinogen = 0.018). Paradoxically, the mean body mass index was higher in Group I (26.4 ± 4.6 kg/m(2)) than in Group II (24.6 ± 3.9 kg/m(2); p = 0.02). CONCLUSIONS: Traditional risk factors for the development of atherosclerosis in a carotid bifurcation are important but not unique. Metabolic and inflammatory factors can contribute to disease progression.

Impact of pH and High-Pressure Pasteurization on the Germination and Development of Clostridium perfringens Spores under Hyperbaric Storage versus Refrigeration.

This study aimed to evaluate hyperbaric storage at room temperature (75-200 MPa, 30 days, 18-23 °C, HS/RT) on Clostridium perfringens spores in brain-heart infusion broth (BHI-broth) at pH 4.50, 6.00, and 7.50 and coconut water (pH 5.40). Both matrices were also pasteurized by high pressure processing (600 MPa, 3 min, 17 °C, HPP) to simulate commercial pasteurization followed by HS, in comparison with refrigeration (5 °C, RF). The results showed that, at AP/RT, spores' development occurred, except at pH 4.50 in BHI-broth, while for RF, no changes occurred along storage. Under HS, at pH 4.50, neither spore development nor inactivation occurred, while at pH 6.00/7.50, inactivation occurred (≈2.0 and 1.0 logs at 200 MPa, respectively). Coconut water at AP/RT faced an increase of 1.6 logs of C. perfringens spores after 15 days, while for RF, no spore development occurred, while the inactivation of spores under HS happened (≈3 logs at 200 MPa). HPP prior to HS seems to promote a subsequent inactivation of C. perfringens spores in BHI-broth at pH 4.50, which is less evident for other pHs. For HPP coconut water, the inactivation levels under HS were lower (≈2.0 logs at 200 MPa). The Weibull model well described the inactivation pattern observed. These results suggest that HS/RT can be simultaneously used as a tool to avoid C. perfringens spores' development, as well as for its inactivation, without the application of high temperatures that are required to inactivate these spores.

High-Pressure Processing Effects on Microbiological Stability, Physicochemical Properties, and Volatile Profile of a Fruit Salad.

Nowadays, consumers are more aware of the effects of their diet on their health, and thus demand natural or minimally processed food products. Therefore, research has focused on processes that assure safe products without jeopardizing their nutritional properties. In this context, this work aimed to evaluate the effects of high-pressure processing (550 MPa/3 min/15 °C, HPP) on a fruit salad (composed of melon juice and pieces of Golden apple and Rocha pear) throughout 35 days of storage at 4 °C. For the physicochemical properties analysed (browning degree, polyphenol oxidase activity, antioxidant activity (ABTS assay), and volatile profile), a freshly made fruit salad was used, while for the microbiological tests (total aerobic mesophiles, and yeast and moulds) spoiled melon juice was added to the fruit salad to increase the microbial load and mimic a challenge test with a high initial microbial load. It was determined that processed samples were more microbiologically stable than raw samples, as HPP enabled a reduction of almost 4-log units of both total aerobic mesophiles and yeasts and moulds, as well as an almost 1.5-fold increase in titratable acidity of the unprocessed samples compared to HPP samples. Regarding browning degree, a significant increase (p < 0.05) was observed in processed versus unprocessed samples (roughly/maximum 68%), while the addition of ascorbic acid decreased the browning of the samples by 29%. For antioxidant activity, there were no significant differences between raw and processed samples during the 35 days of storage. An increase in the activity of polyphenol oxidase immediately after processing (about 150%) was confirmed, which was generally similar or higher during storage compared with the raw samples. Regarding the volatile profile of the product, it was seen that the compounds associated with melon represented the biggest relative percentage and processed samples revealed a decrease in the relative quantity of these compounds compared to unprocessed. Broadly speaking, HPP was shown to be efficient in maintaining the stability and overall quality of the product while assuring microbial safety (by inactivating purposely inoculated microorganisms), which allows for longer shelf life (7 versus 28 days for unprocessed and processed fruit salad, respectively).

Dexamethasone phosphate and penetratin co-eluting contact lenses: a strategy to enhance ocular drug permeability.

Contact lenses (CLs) have been suggested as drug delivery platforms capable of increasing the drug residence time on the cornea and therefore its bioavailability. However, when targeting the posterior segment of the eye, the drug released from CLs still encounters the barrier effect of the ocular tissues, which considerably reduces the efficacy of administration. This work aims at the development of CLs able to simultaneously deliver an anti-inflammatory drug (dexamethasone sodium phosphate) and a cell-penetrating peptide (penetratin), the latter acting as a drug carrier across the tissues. Hydroxyethyl methacrylate (HEMA)-based hydrogels were functionalized with acrylic acid (AAc) and/or aminopropyl methacrylamide (APMA) to serve as CL materials with increased affinity for the drug and peptide. APMA-functionalized hydrogels sustained the dual release for 8 h, which is compatible with the wearing time of daily CLs. Hydrogels demonstrated suitable light transmittance, swelling capacity and in vitro biocompatibility. The anti-inflammatory activity of the drug was not compromised by the presence of the peptide nor by sterilization. The ocular distribution of the drug after 6 h of CL wearing was evaluated in vivo in rabbits and revealed that the amount of drug in the cornea and aqueous humor significantly increased when the drug was co-delivered with penetratin.

Improved triamcinolone acetonide-eluting contact lenses based on cyclodextrins and high hydrostatic pressure assisted complexation.

Contact lenses (CLs) constitute an advantageous platform for the topical release of corticosteroids due to their prolonged contact with the eye. However, the lipophilic nature of corticosteroids hampers CLs' ability to release therapeutic amounts. Two approaches to improve loading and release of triamcinolone acetonide (TA) from poly(2-hydroxyethyl methacrylate)-based hydrogels were investigated: adding 2-hydroxypropyl-ß-cyclodextrin (HP-ß-CD) to the monomers solution before polymerization (HEMA/i-CD) and an hydrogels' post-treatment with HP-ß-CD (HEMA/p-CD). The effect of HP-ß-CD and sterilization by high hydrostatic pressure (HHP) on the hydrogel properties (water content, oxygen and ion permeability, roughness, transmittance, and stiffness) was evaluated. The HEMA/i-CD hydrogels had stronger affinity for TA, sustaining its release for one day. HHP sterilization promoted the formation of cyclodextrin-TA complexes within the hydrogels, improving their drug-loading capacity ¼60 %. Cytotoxicity and irritability tests confirmed the safety of the therapeutic CLs. TA released from the hydrogels permeated through ocular tissues ex vivo and showed anti-inflammatory activity. Finally, a previously validated mathematical model was used to estimate the ability of the TA-loaded CLs to deliver therapeutic drug concentrations to the posterior part of the eye. Overall, HP-ß-CD-containing CLs are promising candidates for the topical ocular application of TA as an alternative delivery system to intraocular injections.

Novel cold and thermally pasteurized cardoon-enriched functional smoothie formulations: A zero-waste manufacturing approach.

This study investigated the potential of incorporating cardoon (Cynara cardunculus L.) blades as bioactive and dietary fiber ingredients in vegetable/fruit-based smoothies, within a zero-waste approach. The smoothie formulations were pasteurized by high-pressure (550 MPa for 3 min, HPP) and thermal (90 °C for 30 s, TP) treatments and stored at 4 °C for 50 days. Cardoon-fortified smoothies exhibited higher viscosity, darker color, increased phenolic compound levels, and greater anti-inflammatory and antioxidant activities. Furthermore, the cardoon blade ingredients contributed to a more stable dietary fiber content throughout the smoothies' shelf-life. HPP-processed smoothies did not contain sucrose, suggesting enzymatic activity that resulted in sucrose hydrolysis. All beverage formulations had low or no microbial growth within European limits. In conclusion, the fortification of smoothies with cardoon blades enhanced bioactive properties and quality attributes during their shelf-life, highlighting the potential of this plant material as a potential functional food ingredient in a circular economy context.