RESUMO
An array of quartz crystals coated with different room-temperature ionic liquids (RTILs) is proposed for the analysis of flavors by quartz crystal microbalance (QCM) measurements. Seven RTILs were adopted as sensing layers, all containing imidazolium or phosphonium cations, differing from one another in the length and branching of alkyl groups and neutralized by different anions. The array was at first applied to the analysis of 31 volatile organic compounds (VOCs), such as alcohols, phenols, aldehydes, esters, ketones, acids, amines, hydrocarbons and terpenes, chosen as representative components of a wide variety of food flavors. Multivariate data analysis by the principal component analysis (PCA) approach of the set of the corresponding responses led to separated clusters for these different chemical categories. To further prove the good performance of the RTIL-coated quartz crystal array as an "electronic nose", it was applied to the analysis of headspaces from cinnamon samples belonging to different botanical varieties ( Cinnamon zeylanicum and Cinnamon cassia ). PCA applied to responses recorded on different stocks of samples of both varieties showed that they could be fully discriminated.
Assuntos
Qualidade dos Alimentos , Líquidos Iônicos/química , Odorantes/análise , Técnicas de Microbalança de Cristal de Quartzo/métodos , Alquilação , Cinnamomum zeylanicum/química , Análise de Componente Principal , Temperatura , Compostos Orgânicos Voláteis/análise , Compostos Orgânicos Voláteis/químicaRESUMO
A simple procedure for preparing inexpensive paper-based three-electrode electrochemical cells is described here. They consist of small circular pads of hydrophilic paper defined by hydrophobic barriers printed on paper with wax-based ink. The back face of these pads is insulated by thermally laminating a polyethylene layer and working, reference and counter electrodes are drawn on paper by using commercial pencil leads. At last, a controlled volume of sample containing a supporting electrolyte was laid to soak in paper channels. Their performance was evaluated by assaying these devices as both simple cells suitable for recording voltammograms on static samples and low-cost detectors for flowing systems. Voltammetric tests, conducted by using potassium hexacyanoferrate(II) as model prototype, were also exploited for identifying the brand and softness of graphite sticks enabling paper to be marked with lines displaying the best conductivity. By taking advantage of the satisfactory information thus gained, pencil drawn electrodes were tested as amperometric detectors for the separation of ascorbic acid and sunset yellow, which were chosen as prototype electroactive analytes because they are frequently present concomitantly in several food matrices, such as soft drinks and fruit juices. This separation was performed by planar thin layer chromatography conducted on microfluidic paper-based devices prepared by patterning on filter paper two longitudinal hydrophobic barriers, once again printed with wax-based ink. Factors affecting both separation and electrochemical detection were examined and optimised, with best performance achieved by using a 20 mM acetate running buffer (pH 4.5) and by applying a detection potential of 0.9 V. Under these optimum conditions, the target analytes could be separated and detected within 6 min. The recorded peaks were well separated and characterized by good repeatability and fairly good sensitivity, thus proving that this approach is indeed suitable for rapidly assembling inexpensive and reliable electrochemical detectors for flow analysis systems.
Assuntos
Técnicas Eletroquímicas/instrumentação , Técnicas Analíticas Microfluídicas/instrumentação , Ácido Ascórbico/isolamento & purificação , Compostos Azo/isolamento & purificação , Eletrodos , Desenho de Equipamento , Papel , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
A prototype of a fast-response task-specific amperometric gas sensor based on paper-supported room-temperature ionic liquids (RTILs) is proposed here for improved analysis of volatile acid species. It consists of a small filter paper foil soaked with a RTIL mixture containing an ionic liquid whose anion (acetate) displays a basic character, upon which three electrodes are screen printed by carbon ink profiting from a suitable mask. It takes advantage of the high electrical conductivity and negligible vapour pressure of RTILs and of their easy immobilization into a porous and inexpensive supporting material such as paper. The performance of this device, used as a wall-jet amperometric detector for flow injection analyses of headspace samples in equilibrium with aqueous solutions at controlled concentrations, was evaluated for phenol and 1-butanethiol vapours which were adopted as model acid gaseous analytes. The results obtained showed that the quite high potentials required for the detection of these analytes are lowered significantly, thanks to the addition of the basic acetate RTIL. In such a way, overlap with the medium discharge is avoided, and the possible adverse effect of interfering species is minimised. The sensor performance was quite satisfactory (detection limits, ca. 0.3 µM; dynamic range, ca. 1-200 µM, both referred to solution concentrations; correlation coefficients in the range 0.993-0.997; repeatability, ± 6% RSD; long-term stability, 9%); thus suggesting the possible use of this device for manifold applications.
Assuntos
Técnicas Eletroquímicas/instrumentação , Gases/análise , Líquidos Iônicos/química , Fenol/análise , Compostos de Sulfidrila/análise , Ácidos/análise , Condutividade Elétrica , Técnicas Eletroquímicas/economia , Eletrodos , Desenho de Equipamento , Limite de Detecção , Papel , Temperatura , VolatilizaçãoRESUMO
The use of a mixed-valent ruthenium oxide/hexacyanoruthenate polymeric film electrochemically deposited onto glassy carbon electrodes is proposed here for the detection of biogenic amines and their amino acid precursors, following their separation by microchip capillary electrophoresis. The ability of this ruthenium coating to electrocatalyze the oxidation of aliphatic and heterocyclic amines, as well as their amino acid precursors, was checked by using ethanolamine, tryptamine and tryptophane as prototype compounds and adopting a 25 mM sulphuric acid as the electrolyte in the detection cell, where a constant potential of 1.05 V versus Ag/AgCl, 3 M KCl was applied to the modified working electrode. Optimization of parameters affecting both detection and separation steps led to satisfactory separations when performed by using a 20 mM phosphate running buffer (pH 2.5) and applying a high voltage of 2.5 kV both in the separation and in the electrokinetic injection (duration 4 s). The recorded peaks were characterized by good repeatability (RSD ≤ 3.6%), high sensitivity and a wide linear range. Detection limits of 23 µM (1.4 mg/L), 27 µM (4.3 mg/L) and 34 µM (6.8 mg/L) were inferred for ethanolamine, tryptamine and tryptophane, respectively. The approach proposed here was also applied for the analysis of some double malt dark beers spiked with a controlled amount of the analytes considered.
Assuntos
Aminoácidos/isolamento & purificação , Aminas Biogênicas/isolamento & purificação , Eletrodos , Eletroforese em Microchip/métodos , Aminoácidos/química , Cerveja/análise , Aminas Biogênicas/química , Cianetos/química , Estabilidade de Medicamentos , Concentração de Íons de Hidrogênio , Oxirredução , Compostos de Rutênio/químicaRESUMO
A simple hydrodynamic injection method is proposed here for microchip CE coupled to electrochemical detection. It is based on the use of a precise syringe pump to push the sample into the microfluidic circuit, accompanied by the application of a secondary electric field to the injection channel, soon after the end of the injection step. In such a way, any counter pressure effect taking place when the sample plug enters the micrometric channel is prevented. Suitable optimization of this secondary electric field enables pushing of sample excess to be avoided and a narrow sample plug during the separation step to be maintained. Best conditions for hydrodynamic injection were achieved injecting catechol as model analyte by pressure with a syringe pump set at a flow rate of 8 microL/min for 6 s and applying to the injection channel a secondary high voltage of 700 V soon after the injection was completed. The reliability of this injection procedure has been proved by comparing electropherograms found for samples containing either catechol alone or catechol and dopamine together with those recorded under the same conditions by electrokinetic injection. Repeatability, expressed as RSD and estimated for seven replicate injections, turned out to be 2.1% for peak height of catechol used as single analyte and 0.9 and 1.1% for catechol and dopamine respectively, simultaneously injected.
Assuntos
Eletroforese em Microchip/instrumentação , Catecóis/isolamento & purificação , Dopamina/isolamento & purificação , Eletroquímica , Eletroforese em Microchip/economia , Eletroforese em Microchip/métodos , Desenho de Equipamento , Reprodutibilidade dos Testes , Fatores de TempoRESUMO
A method based on microchip electrophoresis with electrochemical detection has been developed for the simultaneous determination at trace levels of the main small-chain aldehydes (formaldehyde, acetaldehyde and 2-propenal) present in the atmosphere. Sampling was performed by forcing atmospheres through silica-gel cartridges coated with 2,4-dinitrophenylhydrazine (DNPH), where aldehydes were derivatized to form the corresponding hydrazones, which were then injected and eluted into the electrophoresis system. Factors affecting both separation and detection processes were optimized, with best performance achieved by applying a voltage of 2500 V both in the separation and in the electrokinetic injection (5 s) and using a 15 mM borate buffer (pH 9.2) added with 25 mM of SDS and 20% v/v ACN plus 10% v/v 1-propanol. Under these optimal conditions, well satisfactory resolution could be achieved, so that the analytes could be separated and detected within about 400 s, by applying a detection potential of - 1.0 V versus Ag/Ag/Cl to the glassy carbon-working electrode. The recorded peaks were characterized by both a good repeatibility (RSD <3%) and a linear dependence over a wide concentration range (2-100 microg/mL). Detection limits, estimated for a S/N of 3, equal to 9.5, 7.2 and 9.2 microM were inferred for the DNPH derivatives of formaldehyde, acetaldehyde, 2-propenal, respectively. The application of the method to aldehyde analysis in real air samples is also presented.
Assuntos
Aldeídos/análise , Atmosfera/análise , Eletroforese em Microchip/métodos , Monitoramento Ambiental/métodos , Acetaldeído/análise , Acroleína/análise , Eletroquímica/métodos , Formaldeído/análise , Sensibilidade e EspecificidadeRESUMO
A method, based on microchip electrophoresis with electrochemical detection, has been developed for the simultaneous determination of light aliphatic aldehydes (acetaldehyde, propionaldehyde, butyraldehyde and hexylaldehyde) derivatized with 2,4-dinitrophenylhydrazine (DNPH). Optimal conditions for the derivatization reaction, providing recoveries of 70+/-1.8% for all analytes, were identified by application to real samples, consisting of vegetable oils enriched with known amounts of the aldehydes considered. DNPH hydrazones thus obtained in acetonitrile solution were added to the electrophoresis running medium consisting of a 15mM borate buffer (pH 9.2) added with 25mM of sodium dodecyl sulfate and 35% (v/v) of acetonitrile. Factors affecting both separation and electrochemical detection were examined and optimised, with best performance achieved by using the running medium above and applying a voltage of 2250V in both separation and electrokinetic injection. Under these optimal conditions, the target analytes could be separated and detected within 350s by applying a detection potential of -1.0V (vs. Ag/AgCl) to the glassy carbon working electrode. The recorded peaks were well separated and characterized by good repeatability (RSD=1.6-3.8%), high sensitivity and a wide linear range. Detection limits of 4.5, 6.6, 6.8, 13.1microM were obtained for acetaldehyde-DNPH, propionaldehyde-DNPH, butyraldehyde-DNPH and hexylaldehyde-DNPH derivatives, respectively.
Assuntos
Aldeídos/análise , Eletroforese em Microchip/métodos , Aldeídos/isolamento & purificação , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
A high density polyethylene (HDPE)/calcium carbonate (CaCO(3)) film containing TiO(2) was prepared via blown film extrusion process. The photocatalytic properties of this film were evaluated by voltammetric, UV-Vis spectrophotometric and gas chromatographic measurements following the decomposition rate of suitably selected molecular probes, such as 4-hydroxybenzoic acid and methylene blue. The film containing 1% w/w of TiO(2) displayed a profitable and reproducible photoinduced degradation activity towards target organic compounds. The effect of packaging photocatalytic activity on the structural and microbiological stability of a short-ripened cheese was studied. Cheese structure was assessed by dynamic, small deformation rheological tests. A container consisting of a multilayer material, where the layer brought in contact with the food, made from the HDPE+CaCO(3)+TiO(2) composite matrix, was able to provide a greater maintenance of the original cheese structure than a rigid container currently used, mainly due to the inhibition of lactic acid bacteria and coliforms.
Assuntos
Queijo/análise , Queijo/microbiologia , Embalagem de Alimentos/instrumentação , Titânio/química , Bactérias/efeitos dos fármacos , Bactérias/isolamento & purificação , Oxirredução , Processos Fotoquímicos/efeitos da radiação , Polietileno/química , Titânio/farmacologiaRESUMO
A sensitive and fast-responding membrane-free amperometric gas sensor is described, consisting of a small filter paper foil soaked with a room temperature ionic liquid (RTIL), upon which three electrodes are screen printed with carbon ink, using a suitable mask. It takes advantage of the high electrical conductivity and negligible vapour pressure of RTILs as well as their easy immobilization into a porous and inexpensive supporting material such as paper. Moreover, thanks to a careful control of the preparation procedure, a very close contact between the RTIL and electrode material can be achieved so as to allow gaseous analytes to undergo charge transfer just as soon as they reach the three-phase sites where the electrode material, paper supported RTIL and gas phase meet. Thus, the adverse effect on recorded currents of slow steps such as analyte diffusion and dissolution in a solvent is avoided. To evaluate the performance of this device, it was used as a wall-jet amperometric detector for flow injection analysis of 1-butanethiol vapours, adopted as the model gaseous analyte, present in headspace samples in equilibrium with aqueous solutions at controlled concentrations. With this purpose, the RTIL soaked paper electrochemical detector (RTIL-PED) was assembled by using 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide as the wicking RTIL and printing the working electrode with carbon ink doped with cobalt(II) phthalocyanine, to profit from its ability to electrocatalyze thiol oxidation. The results obtained were quite satisfactory (detection limit: 0.5 µM; dynamic range: 2-200 µM, both referring to solution concentrations; correlation coefficient: 0.998; repeatability: ±7% RSD; long-term stability: 9%), thus suggesting the possible use of this device for manifold applications.
Assuntos
Técnicas Eletroquímicas/instrumentação , Técnicas Eletroquímicas/métodos , Gases/análise , Líquidos Iônicos/química , Papel , Ação Capilar , Condutividade Elétrica , Eletrodos , Análise de Injeção de Fluxo , Imidazóis/química , Limite de Detecção , Modelos Químicos , Pressão , Reprodutibilidade dos Testes , Compostos de Sulfidrila/análise , TemperaturaRESUMO
A sensitive and fast responding electrochemical sensor is described for the determination of free and total sulphur dioxide in wines and grape juices which prevents interferences coming from ethanol and other natural components. It consists of a cell provided with a porous gold working electrode supported on one face of an ion-exchange membrane, acting as a solid polymer electrolyte (SPE), which allows gaseous electroactive analytes to be detected. This sensor was used as an amperometric detector for a flow injection system in which controlled volumes of headspace equilibrated with samples were injected. This approach was adopted to make also possible the determination of total SO(2), avoiding drawbacks caused by the high relative humidity generated by the sample heating resulting from the neutralization reaction of excess NaOH, whose addition was required to release sulphur dioxide from its combined forms. Factors affecting the detection process were examined and optimised. Under the identified optimal conditions, SO(2) detection resulted in sharp peaks which allowed to infer detection limits for a signal-to-noise ratio of 3, referred to liquid samples, of 0.04 and 0.02 mg L(-1) for free and total SO(2) which were determined at 20 and 35 degrees C, respectively. Moreover, the responses were found to be characterized by good repeatability (+/-2% and +/-4%, respectively) and linear dependence on the SO(2) concentration over a wide range (0.2-500 mg L(-1) for both free and total SO(2)). Finally, the long-term stability of the sensor turned out to be totally satisfactory in that responses changed of +/-9% alone even after long periods of continuous use. The application to some commercial wines and grape juices is also presented.
Assuntos
Bebidas/análise , Eletroquímica/métodos , Análise de Injeção de Fluxo/instrumentação , Dióxido de Enxofre/análise , Vitis , Eletroquímica/instrumentação , Eletrodos , Desenho de Equipamento , Troca Iônica , Limite de Detecção , Membranas Artificiais , Reprodutibilidade dos Testes , Vinho/análiseRESUMO
Cathodic stripping voltammetry (CSV), ion-chromatography (IC) and spectrophotometry (SP) have been tested as instrumental approaches alternative to inductively coupled plasma mass spectrometry (ICP-MS) for the determination of inorganic bromide residues in foodstuffs fumigated with brominated pesticides and digested by a suitably improved microwave procedure proposed previously. They were chosen in view of the fact that the relevant instrumentation is less expensive than that required for ICP-MS and more frequently available in analytical laboratories designed for routine food control. These approaches were compared with one another, as well as with the ICP-MS method previously adopted, not only with regard to their performance, but also in terms of the interferences caused by the composition of final samples coming from the microwave digestion procedure. The results found pointed out unambiguously that IC turns out to be well suited for replacing ICP-MS, thanks to its consistency with the composition of digested samples and its good sensitivity which allows a quite low detection limit for bromides (0.2 mg kg(-1)) to be achieved. Conversely, CSV and SP performance appears to be significantly affected by interferences caused by the presence in digested samples of chlorides and ammonium ions, respectively.