RESUMO
The main purpose of this work is to provide a comprehensive overview on the preparation of multifunctional epoxies, with improved antimicrobial activity and enhanced mechanical properties through nanomodification. In the first section, we focus on the approaches to achieve antimicrobial activity, as well as on the methods used to evaluate their efficacy against bacteria and fungi. Relevant application examples are also discussed, with particular reference to antifouling and anticorrosion coatings for marine environments, dental applications, antimicrobial fibers and fabrics, and others. Subsequently, we discuss the mechanical behaviors of nanomodified epoxies with improved antimicrobial properties, analyzing the typical damage mechanisms leading to the significant toughening effect of nanomodification. Some examples of mechanical properties of nanomodified polymers are provided. Eventually, the possibility of achieving, at the same time, antimicrobial and mechanical improvement capabilities by nanomodification with nanoclay is discussed, with reference to both nanomodified epoxies and glass/epoxy composite laminates. According to the literature, a nanomodified epoxy can successfully exhibit antibacterial properties, while increasing its fracture toughness, even though its tensile strength may decrease. As for laminates-obtaining antibacterial properties is not followed by improved interlaminar properties.
Assuntos
Anti-Infecciosos/química , Materiais Revestidos Biocompatíveis/química , Materiais Dentários/química , Resinas Epóxi/química , Nanocompostos/química , Anti-Infecciosos/farmacologia , Vidro/química , Humanos , Testes Mecânicos , Nanotecnologia , Propriedades de Superfície , Resistência à TraçãoRESUMO
The present article investigates the possibility of simulating the electrical conductivity of carbon nanotube-reinforced polymer composites by numerical methods. Periodic representative volume elements are generated by randomly distributing perfectly conductive reinforcements in an insulating matrix and are used to assemble an electrical network representative of the nanocomposite, where the nanotube-nanotube contacts are considered equivalent resistors modeled by means of Simmons' equation. A comparison of the results with experimental data from the literature supports the conclusion that a random distribution of reinforcements is not suitable for simulating this class of materials since percolation thresholds and conductivity trends are different, with experimental percolation taking place before the expectations. Including nanotube curvature does not solve the issue, since it hinders percolation even further. In agreement with experimental observations, the investigation suggests that a suitable approach requires the inclusion of aggregation during the volume element generation to reduce the volume fraction required to reach percolation. Some solutions available in the literature to generate properly representative volume elements are thus listed. Concerning strain sensing, the results suggest that representative volume elements generated with random distributions overestimate the strain sensitivity of the actual composites.
RESUMO
The main aim of this work is to provide a brief overview of the analytical solutions available to describe the in-plane and out-of-plane stress fields in orthotropic solids with radiused notches. To this end, initially, a brief summary on the bases of complex potentials for orthotropic elasticity is presented, with reference to plane stress or strain and antiplane shear problems. Subsequently, the attention is moved to the relevant expressions for the notch stress fields, considering elliptical holes, symmetric hyperbolic notches, parabolic notches (blunt cracks), and radiused V-notches. Eventually, examples of applications are presented, comparing the presented analytical solutions with the results from numerical analyses carried out on relevant cases.
RESUMO
In this paper, an analytical solution for the stress fields in the close neighbourhoods of radiused notches in thick orthotropic plates under shear loading and twisting is provided. In the first step, the equations of the three-dimensional theory of elasticity are successfully reduced to two uncoupled equations in two-dimensional space. Later, the 3D stress field solution for orthotropic plates with radiused notches is presented and its degree of accuracy is discussed by comparing theoretical results and numerical data from 3D FE analyses. The solution proposed can be satisfactorily used to characterise the stress field in plates made with polymeric composite materials, such as fibre-reinforced polymers and natural composites.
RESUMO
Two nanomicas of similar composition, containing muscovite and quartz, but with different particle size distributions, have been used to prepare transparent epoxy nanocomposites. Their homogeneous dispersion, due to the nano-size, was achieved even without being organically modified, and no aggregation of the nanoparticles was observed, thus maximizing the specific interface between matrix and nanofiller. No exfoliation or intercalation has been observed by XRD, despite the significant dispersion of the filler in the matrix which produced nanocomposites with a loss in transparency in the visible domain of less than 10% in the presence of 1% wt and 3% wt of mica fillers. The presence of micas does not affect the thermal behavior of the nanocomposites, which remains similar to that of the neat epoxy resin. The mechanical characterization of the epoxy resin composites revealed an increased Young's modulus, whereas tensile strength was reduced. A peridynamics-based representative volume element approach has been implemented to estimate the effective Young's modulus of the nanomodified materials. The results obtained through this homogenization procedure have been used as input for the analysis of the nanocomposite fracture toughness, which has been carried out by a classical continuum mechanics-peridynamics coupling approach. Comparison with the experimental data confirms the capability of the peridynamics-based strategies to properly model the effective Young's modulus and fracture toughness of epoxy-resin nanocomposites. Finally, the new mica-based composites exhibit high values of volume resistivity, thus being excellent candidates as insulating materials.