RESUMO
Animal welfare is becoming an increasingly important requirement in the livestock sector to improve, and therefore raise, the quality and healthiness of food production. By monitoring the behaviour of the animals, such as feeding, rumination, walking, and lying, it is possible to understand their physical and psychological status. Precision Livestock Farming (PLF) tools offer a good solution to assist the farmer in managing the herd, overcoming the limits of human control, and to react early in the case of animal health issues. The purpose of this review is to highlight a key concern that occurs in the design and validation of IoT-based systems created for monitoring grazing cows in extensive agricultural systems, since they have many more, and more complicated, problems than indoor farms. In this context, the most common concerns are related to the battery life of the devices, the sampling frequency to be used for data collection, the need for adequate service connection coverage and transmission range, the computational site, and the performance of the algorithm embedded in IoT-systems in terms of computational cost.
Assuntos
Bem-Estar do Animal , Gado , Feminino , Bovinos , Animais , Humanos , Fazendas , Monitorização Fisiológica , Coleta de Dados , Indústria de LaticíniosRESUMO
Yearly, in Europe, more than 1 million tonnes of plastic materials are used in agricultural activities. Among the possible applications, plastic films for protected cultivation practices are highly used worldwide because of the significant advantage deriving from the shortening of the growing period. However, in the absence of a correct policy disposal of plastic films, environmental degradation could take place with serious ecological and economic consequences. In this study, a geographical information system (GIS) - based model to locate and quantify the yearly amount of agricultural plastic waste (APW) coming from crop-shelter coverage used in greenhouses system was put forward and was applied in a study area located in southern Italy, highly characterised by protected cultivation practices. Firstly, the areas with the highest density of crop shelters were mapped, then a suitable index to determine APW amount was computed and applied to obtain heat maps related to covering plastic films. Finally, sensitivity analyses were carried out by varying thickness, lifetime, and density of the covering films of the greenhouses, located in the considered samples. The index ranged between 976 kg ha-1yr-1and, 2484 kg ha-1yr-1. The results showed that the density of greenhouses and tunnels-greenhouses is still elevated nearby the coastline, highlighting that the guidelines of the territorial plan of the Province of Ragusa concerning the displacement of protected crops from the coast to the internal rural areas were disregarded. Moreover, the GIS-based model results could provide basic information for the analysis of the environmental impact due to transportation of APW. Therefore, these results could offer a suitable tool to improve the correct disposal management of covering plastic films and the related recycle policy.
Assuntos
Sistemas de Informação Geográfica , Plásticos , Europa (Continente) , Itália , ReciclagemRESUMO
Plastic films can be considered as a high-value auxiliary material in agriculture with multiple important uses to fulfil, including covering films in greenhouse cultivation system. Such an application enables several benefits and, therefore, it is going through an important upsurge, especially in regions where protected crop cultivation is highly widespread. However, the increased demand for these covering films arouses concerns for their post-use treatment with regard to both the consumption of Non-Renewable Primary Energy (NRPE) resources and the emission of Greenhouse Gases (GHGs). Therefore, environmental analysis is needed to find and follow cleaner paths for the management and treatment of this kind of Agricultural Plastic Waste (APW), especially in the light of the gap currently existing in the specialised literature. In this context, this paper reports upon findings from a combined Life Cycle Assessment (LCA) of single environmental issues (i.e., energy and water consumption, and GHG emissions) applied to a Sicilian firm, representative of APW collection and recycling to obtain Low-Density Polyethylene (LDPE) granules. The results showed that electricity consumption for the whole recycling process is the most NRPE resource demanding and the most GHG emitting input item. Moreover, the washing phase of disused covering films is the highest water demanding within the recycling process. Potential improvements could be achieved by shifting from fossil energy source to renewable one. The installation of a wind power plant would lead to around 56% and 85% reduction in NRPE resource exploitation and GHG emission, respectively. Finally, despite the huge consumption of water and NRPE resources and the resulting GHG emissions, the production of recycled-LDPE granules is far more sustainable than the virgin counterpart.
Assuntos
Plásticos , Reciclagem , Agricultura , Fontes Geradoras de Energia , Efeito Estufa , Centrais ElétricasRESUMO
The suitability of the co-digestion of feedstock-mixtures (by-products and agricultural residues) depends on their ability to produce biogas. In this study, the effects of mixing five feedstocks (citrus pulp, olive pomace, poultry manure, Italian sainfoin silage and opuntia fresh cladodes) on anaerobic digestion for biogas production have been investigated by carrying out biomethane potential (BMP) tests on six different mixing ratios of the selected five biomasses. The BMP test results demonstrated that all the six studied feedstock-mixtures could be potentially used for renewable energy generation by biogas plants. More in detail, two mixing ratios of the studied feedstock-mixtures showed the best biomethane potential of 249.9 and 260.1 Nm3CH4/tVS, respectively. Since this research study made it possible to screen the suitability and technical feasibility of the feedstock-mixtures analysed, the results provide the basis for subsequent pilot scale evaluation of anaerobic digestion in Mediterranean area, where by-products and agricultural residues are profuse and necessary to produce advanced biofuels.
Assuntos
Agricultura , Biocombustíveis , Gerenciamento de Resíduos , Anaerobiose , Itália , Esterco , Metano , SilagemRESUMO
Interest in tracking and monitoring animals in livestock farming using wearable sensors has been steadily increasing. The use of these devices is particularly crucial in extensive livestock systems where direct interaction between animals and farmers is infrequent, necessitating strenuous efforts in long-distance herd monitoring. Internet of Things (IoT) technologies offer a promising solution to address the challenges posed by vast distances, enabling real-time and remote animal monitoring. In this study, an experimental trial was conducted using a custom-designed device, located in a Polyvinyl Chloride (PVC) case, specifically tailored to fit onto a collar. This case incorporates an integrated SigFox communication system, i.e., a Low Power Global Positioning System (LP-GPS) omnidirectional system, and a power supply. The trial took place in two grazing areas located in different territorial zones, designated as Case Study I and II. A LP-GPS collar was provided for each selected animal, and the data were recorded at 20-min intervals for Case Study I and 10-min intervals for Case Study II. The acquired data were then imported and analysed using Geographical Information Systems (GIS) software. Information was collected through a purpose-built web application (AppWeb). The objective was to analyze those territorial areas mostly occupied by animals within the two considered grazing areas by developing a GIS-based methodology. Specifically, customized algorithms such as Heatmap and Kernel Density Estimation (KDE) plugins were employed to conduct spatial analyses. The maps obtained through Heatmap plugin, showed the temporal-spatial distribution of animals within their grazing areas. Additionally, the KDE tool was used to classify preferred territorial areas, generating tailored charts for each animal in the sample. The individual Core Areas, determined through KDE evaluation for each animal, were overlaid to provide a comprehensive analysis of the monitored animals.The results achieved applying the GIS-based methodology facilitated the identification of animal positions and could be adopted to provide insights into feeding behavior and soil erosion, thereby aiding in the prevention of environmental issues.
RESUMO
This study focused on applying batch and continuous co-digestion approaches to investigate the effects of a feedstock mixture (FM) constituted by ten Mediterranean feedstocks highly available in the Mediterranean area (i.e., olive pomace, olive mill wastewater, citrus pulp, poultry litter, poultry and cattle manure, whey and cereal straw) on methane production for bioenergy generation. For the same feedstock mixture (FM), two different anaerobic digestion (AD) tests were carried out to evaluate the possible inhibitory effects of some biomasses on the biological process. The first AD test showed a methane yield equal to 229â¯Nm3CH4/tVS (27% lower than that measured during the batch test). During the second AD test, the specific production was 272â¯m3CH4/tVS. Both tests showed a similar methane content of methane in the biogas, equal to about 57%. The first AD test showed an inhibition effect of the process: total conversion of the organic matter into biogas was not ended. The second batch test demonstrated that the selected FM could be viable to carry out the co-digestion and could provide a flexible solution to generate advanced biofuels in biogas plants located in the Mediterranean area.
Assuntos
Agricultura , Gerenciamento de Resíduos/métodos , Resíduos , Animais , Região do MediterrâneoRESUMO
To valorize agricultural wastes and byproducts in southern Italy, anaerobic co-digestion of six feedstocks (citrus pulp, olive pomace, cattle manure, poultry litter, whey, and corn silage) was studied to produce biogas for renewable energy generation. Both batch and semi-continuous co-digestion approaches were adopted to carry out the investigation. The feedstocks were mixed at different percentages according to their availabilities in southern Italy. The batch anaerobic co-digestion demonstrated that six studied feedstock mixtures generated an average of 239â¯mL CH4/g VS loading without significant difference between each other, which concluded that the feedstock mixtures can be used for biogas production. Considering the feedstock availability of citrus pulp and olive pomace in Sicily, three feedstock mixtures with the highest volatile solids concentration of citrus pulp (42% citrus pulp, 17% corn silage, 4% cattle manure, 8% poultry litter, and 18% whey; 34% citrus pulp, 8% olive pomace, 17% corn silage, 4% cattle manure, 8% poultry litter, and 18% whey; and 25% citrus pulp, 16% olive pomace, 17% corn silage, 4% cattle manure, 8% poultry litter, and 18% whey, respectively) were selected to run the semi-continuous anaerobic digestion. Under the stabilized culture condition, the feed mixture with 42% citrus pulp, 17% corn silage, 4% cattle manure, 8% poultry litter, and 18% whey presented the best biogas production (231â¯L methane/kg VS loading/day). The corresponding mass and energy balance concluded that all three tested feedstock mixtures have positive net energy outputs (1.5, 0.9, and 1.2â¯kWh-e/kg dry feedstock mixture, respectively).