RESUMO
A small footprint, low voltage and wide bandwidth electro-optic modulator is critical for applications ranging from optical communications to analog photonic links, and the integration of thin-film lithium niobate with photonic integrated circuit (PIC) compatible materials remains paramount. Here, a hybrid silicon nitride and lithium niobate folded electro-optic Mach Zehnder modulator (MZM) which incorporates a waveguide crossing and 3 dB multimode interference (MMI) couplers for splitting and combining light is reported. This modulator has an effective interaction region length of 10 mm and shows a DC half wave voltage of roughly 4.0 V, or a modulation efficiency (Vπ ·L) of roughly 4 V·cm. Furthermore, the device demonstrates a power extinction ratio of roughly 23 dB and shows .08 dB/GHz optical sideband power roll-off with index matching fluid up to 110 GHz, with a 3-dB bandwidth of 37.5 GHz.
RESUMO
The ability to both spatially and spectrally demultiplex wireless transmitters enables communication networks with higher spectral and energy efficiency. In practice, demultiplexing requires sub-millisecond latency to map the dynamics of the user space in real-time. Here, we present a system architecture, referred to as k-space imaging, which channelizes the radio frequency signals both spatially and spectrally through optical beamforming, where the latency is limited only by the speed of light traversing the optical components of the receiver. In this architecture, a phased antenna array samples radio signals, which are then coupled into electro-optic modulators (EOM) that coherently up-convert these signals to the optical domain, preserving their relative phases. The received signals, now optical sidebands, are transmitted in optical fibers of varying path lengths, which act as true time delays that yield frequency-dependent optical phases. The output facets of the optical fibers form a two-dimensional optical phased array in an arrangement preserving the phases generated by the angle of arrival (AoA) and the time-delay phases. Directing the beams emanating from the fibers through an optical lens produces a two-dimensional Fourier transform of the optical field at the fiber array. Accordingly, the optical beam formed at the back focal plane of the lens is steered based upon the phases, providing the angle of arrival and instantaneous frequency measurement (IFM), with latency determined by the speed of light over the optical path length. We present a numerical evaluation and experimental demonstration of this passive AoA- and frequency-detection capability.
RESUMO
Millimeter-wave (mmW) imaging receivers have demonstrated the ability to sense radio-frequency (RF) waves using traditional phased antenna array techniques, and, through a coherent photonic up-conversion process, image these waves using free-space optical systems. Building upon the idea of coherent up-conversion, k-space tomography extends the functionality of the millimeter-wave imaging receiver as a two-dimensional spatial processing unit to three-dimensional sensing with the addition of frequency detection. In this configuration, an arrayed waveguide grating, or temporal aperture, is implemented following the photonic up-conversion of RF signals received by the phased array. These waveguides of varying length add a spectral beam-forming network to the existing spatial beam-forming of the mmW-imaging receiver. The introduction of three-dimensional phase information to the imaging system disrupts the ability to directly image the RF signal distribution on a photo-detector array, requiring the application of tomographic algorithms to reconstruct the power distribution of the received signals. In order to receive and properly recover the spatial-spectral distribution of RF sources, the antenna array and temporal array must be sampled adequately to avoid introduction of grating artifacts into the system response. Grating lobes, an artifact of regular spacing of elements within a grating, restrict the alias-free field of regard for antenna arrays, or the free spectral range for time-delay based arrays, thus limiting the spatial-spectral monitoring of RF sources via the k-space imaging modality. To alleviate this constraint, we present a non-uniform log-periodic array sampling for the k-space tomographic time-delay based aperture, greatly increasing the free spectral range of the system while maintaining the number of existing channels.
RESUMO
A low voltage operation electro-optic modulator is critical for applications ranging from optical communications to an analog photonic link. This paper reports a hybrid silicon nitride and lithium niobate electro-optic Mach-Zehnder modulator that employs 3 dB multimode interference couplers for splitting and combining light. The presented amplitude modulator with an interaction region length of 2.4 cm demonstrates a DC half-wave voltage of only 0.875 V, which corresponds to a modulation efficiency per unit length of 2.11 V cm. The power extinction ratio of the fabricated device is approximately 30 dB, and the on-chip optical loss is about 5.4 dB.
RESUMO
In this paper, we propose an electro-optic modulator design in a hybrid Si3N4-X-cut LiNbO3. The modulator is based on a modified racetrack resonator and performs at both DC and heightened frequencies. Here the driving electrodes are defined along the straight section of the racetrack. This is done to maximize modulation and minimize modulation-cancelation that occurs in a conventional X-cut LiNbO3-based resonator due to the directional change of the electric field in the micro-ring. The single bus racetrack resonator is formed in a hybrid Si3N4-LiNbO3 platform, to guide the optical mode. The fabricated device is characterized and has a measured tunability and intrinsic quality factor (Q) of 2.9 pm/V and 1.3 × 105, respectively. In addition, the proposed racetrack device exhibits enhanced electro-optic conversion efficiency at modulation frequencies that match with the racetrack's optical free spectral range (FSR). For example, at the modulation frequency of 25 GHz, which corresponds to the fabricated device's optical FSR frequency, a â¼10 dB increase in electro-optic conversion efficiency is demonstrated. With the enhancement, our measured device demonstrates a conversion efficiency comparable to non-resonant thin-film LiNbO3 devices that possess RF electrodes that are 10 times longer in length.
RESUMO
This Letter presents, to the best of our knowledge, the first hybrid Si3N4-LiNbO3-based tunable microring resonator where the waveguide is formed by loading a Si3N4 strip on an electro-optic (EO) material of X-cut thin-film LiNbO3. The developed hybrid Si3N4-LiNbO3 microring exhibits a high intrinsic quality factor of 1.85×105, with a ring propagation loss of 0.32 dB/cm, resulting in a spectral linewidth of 13 pm, and a resonance extinction ratio of â¼27 dB within the optical C-band for the transverse electric mode. Using the EO effect of LiNbO3, a 1.78 pm/V resonance tunability near 1550 nm wavelength is demonstrated.
RESUMO
We present a thin film crystal ion sliced (CIS) LiNbO3 phase modulator that demonstrates an unprecedented measured electro-optic (EO) response up to 500 GHz. Shallow rib waveguides are utilized for guiding a single transverse electric (TE) optical mode, and Au coplanar waveguides (CPWs) support the modulating radio frequency (RF) mode. Precise index matching between the co-propagating RF and optical modes is responsible for the device's broadband response, which is estimated to extend even beyond 500 GHz. Matching the velocities of these co-propagating RF and optical modes is realized by cladding the modulator's interaction region in a thin UV15 polymer layer, which increases the RF modal index. The fabricated modulator possesses a tightly confined optical mode, which lends itself to a strong interaction between the modulating RF field and the guided optical carrier; resulting in a measured DC half-wave voltage of 3.8 V·cm-1. The design, fabrication, and characterization of our broadband modulator is presented in this work.
RESUMO
This Letter presents an optical mode transition structure for use in Si3N4/LiNbO3-based hybrid photonics. A gradual modal transition from a Si3N4 waveguide to a hybrid Si3N4/LiNbO3 waveguide is achieved by etching a terrace structure into the sub-micrometer thick LiNbO3 film. The etched film is then bonded to predefined low pressure chemical vapor deposition Si3N4 waveguides. Herein we analyze hybrid optical devices both with and without the aforementioned mode transition terrace structure. Experimental and simulated results indicate that inclusion of the terrace significantly improves mode transition compared to an abrupt transition, i.e., a 1.78 dB lower mode transition loss compared to the abrupt transition. The proposed transition structure is also applied to the design of hybrid Si3N4-LiNbO3 micro-ring resonators. A high-quality factor (Q) resonator is demonstrated with the terrace transition which mitigates undesired resonances.
RESUMO
We harness coherent optical processing to simultaneously sense the angle of arrival and the frequency of radio waves. Signals captured by a distributed antenna array are up-converted to optical domain using electro-optic modulators coupled to individual antennas. Employing a common laser source to feed all the modulators ensures spatially coherent up-conversion of radio-frequency (RF) waves to optical beams carried by optical fibers. Fiber-length dispersion extends the spatial aperture of the distributed antenna array into the temporal dimension. The interference of beams emanating from the fibers is captured by a CCD and used to computationally reconstruct RF waves in k-space.
RESUMO
In this paper we address a significant limitation of silicon as an optical material, namely, the upper bound of its potential modulation frequency. This arises due to finite carrier mobility, which fundamentally limits the frequency response of all-silicon modulators to about 60 GHz. To overcome this limitation, another material must be integrated with silicon to provide increased operational bandwidths. Accordingly, this paper proposes and demonstrates the integration of a thin LiNbO3 device layer with silicon and a novel tuning process that matches the propagation velocities between the propagating radio-frequency (RF) and optical waves. The resulting lithium niobate on silicon (LiNOS) modulator is demonstrated to operate from DC to 110 GHz.
RESUMO
This Letter presents a method for the fabrication and integration of a thin LiNbO3 substrate with a Si handle wafer. An inverted ridge structure guides a single optical mode in an electro-optic modulator fabricated on a mechanically thinned substrate. To define an optical waveguide, a ridge structure is first patterned on a 500 µm thick X-cut LiNbO3 wafer; then a low dielectric constant adhesive layer is used to bond the etched LiNbO3 to Si. The LiNbO3 is mechanically thinned to 4 µm, and planar electrodes are patterned. Experimental results demonstrating modulation with a V(π)L of 7.1 V-cm were shown, optical loss was low enough, and film quality high enough, to enable an interaction length of 0.8 cm.
RESUMO
In this paper, we report the results of the efforts to extend our previous work through the packaging and redesign of a heterogeneously integrated silicon-photonic circuit for use in a modulation side-band injection-locked optical RF generation system. Towards that effort, we attempted to improve the RF spectrum coverage of our design by decreasing the laser cavity length. Despite the unintended formation of an additional parasitic cavity in that device, we demonstrated increased spectrum coverage between 5 and 50 GHz in a packaged module with an â¼ 1-Hz linewidth.
RESUMO
In this Letter, we report on the improved configuration of a widely tunable optical RF generation system, particularly for the generation of low-frequency RF, as well as the reduction of phase noise in that same system. Using an amplitude modulator, a simplified system design was demonstrated with fewer components and improved phase noise performance, especially at RF frequencies below â¼36 GHz. Excess phase noise due to acoustic vibrations of the optical fibers was also successfully eliminated by mechanical isolation. A minimum phase noise of -124 dBc/Hz at 10 kHz offset was demonstrated at 4 GHz.
RESUMO
Several targets are set-up outside and imaged by a passive millimeter-wave sensor over a 24 hour period. The sensor is capable of measuring two linear polarization states simultaneously and the contrasts of the targets are compared for the different polarizations. The choice of polarization is shown to have an impact on the contrast of different targets throughout the day. In an extreme case the contrast of a target experiences a crossover event and disappears for one polarization while it presents a strong contrast (9 K) with the other polarization. Experimental results are shown along with a simulation of the scene using a ray tracing program.
Assuntos
Refratometria/instrumentação , Refratometria/métodos , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
Coded aperture snapshot spectral imaging systems (CASSI) sense the three-dimensional spatio-spectral information of a scene using a single two-dimensional focal plane array snapshot. The compressive CASSI measurements are often modeled as the summation of coded and shifted versions of the spectral voxels of the underlying scene. This coarse approximation of the analog CASSI sensing phenomena is then compensated by calibration preprocessing prior to signal reconstruction. This paper develops a higher-order precision model for the optical sensing in CASSI that includes a more accurate discretization of the underlying signals, leading to image reconstructions less dependent on calibration. Further, the higher-order model results in improved image quality reconstruction of the underlying scene than that achieved by the traditional model. The proposed higher precision computational model is also more suitable for reconfigurable multiframe CASSI systems where multiple coded apertures are used sequentially to capture the hyperspectral scene. Several simulations and experimental measurements demonstrate the benefits of the discretization model.
RESUMO
The frequency dependence of the spur-free dynamic range (SFDR) in a modulator based on an injection-locked laser is analyzed. It is shown that as the modulation frequency approaches half of the locking range, the SFDR of the modulator approaches that of a standard Mach-Zehnder configuration. At low frequencies, the SFDR degrades by 2 dB for every octave of frequency increase.
Assuntos
Interferometria/instrumentação , Modelos Teóricos , Refratometria/instrumentação , Simulação por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Dinâmica não LinearRESUMO
In recent years, the development of new lithium niobate electro-optic modulator designs and material processing techniques have contributed to support the increasing need for faster optical networks by considerably extending the operational bandwidth of modulators. In an effort to provide higher bandwidths for future generations of networks, we have developed a lithium niobate electro-optic phase modulator based on a coplanar waveguide ridged structure that operates up to 300 GHz. By thinning the lithium niobate substrate down to less than 39 µm, we are able to eliminate substrate modes and observe optical sidebands over the full millimeter-wave spectrum.
Assuntos
Nióbio/química , Óxidos/química , Processamento de Sinais Assistido por Computador/instrumentação , Ressonância de Plasmônio de Superfície/instrumentação , Telecomunicações/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Micro-OndasRESUMO
A passive millimeter-wave (mmW) sensor operating at a frequency of 77 GHz is built and characterized. The sensor is a single pixel sensor that raster scans to create an image. Optical upconversion is used to convert the incident mmW signal into an optical signal for detection. Components were picked to be representative of a single element in a distributed aperture system. The performance of the system is analyzed, and the noise equivalent temperature difference is found to be 0.5 K (for a 1 s integration time) with a diffraction limited resolution of ~8 mrad. Representative images are shown that demonstrate the phenomenology associated with this spectrum.
RESUMO
We demonstrate a process for the fabrication and transfer of silicon nanomembranes (Si-NMs) that have been released from their host substrates and redeposited on foreign flexible or flat substrates. The transfer process developed allows intricate photonic devices to be transferred via NMs to a variety of new substrate materials. This allows the transferred devices to benefit from the material properties of both substrate and NM. Our process is designed to transfer and stack large-area photonic devices without compromising their optical performance. The process has been used to transfer large-area unpatterned silicon NMs, in excess of 2.5 cm(2), and photonic devices with intricate device designs containing various fill factors. We have also demonstrated transferred photonic crystal devices that have maintained structural integrity and functionality.
RESUMO
We report on the development of a digital-micromirror-device (DMD)-based multishot snapshot spectral imaging (DMD-SSI) system as an alternative to current piezostage-based multishot coded aperture snapshot spectral imager (CASSI) systems. In this system, a DMD is used to implement compressive sensing (CS) measurement patterns for reconstructing the spatial/spectral information of an imaging scene. Based on the CS measurement results, we demonstrated the concurrent reconstruction of 24 spectral images. The DMD-SSI system is versatile in nature as it can be used to implement independent CS measurement patterns in addition to spatially shifted patterns that piezostage-based systems can offer.