Influence of Sintering Conditions on the Structure and Redox Speciation of Homogeneous (U,Ce)O2+δ Ceramics: A Synchrotron Study.

Although uranium-cerium dioxides are frequently used as a surrogate material for (U,Pu)O2-δ nuclear fuels, there is currently no reliable data regarding the oxygen stoichiometry and redox speciation of the cations in such samples. In order to fill this gap, this manuscript details a synchrotron study of highly homogeneous (U,Ce)O2±Î´ sintered samples prepared by a wet-chemistry route. HERFD-XANES spectroscopy led to determining accurately the O/M ratios (with M = U + Ce). Under a reducing atmosphere (pO2 ≈ 6 × 10-29 atm at 650 °C), the oxides were found to be close to O/M = 2.00, while the O/M ratio varied with the sintering conditions under argon (pO2 ≈ 3 × 10-6 atm at 650 °C). They globally appeared to be hyperstoichiometric (i.e., O/M > 2.00) with the departure from the dioxide stoichiometry decreasing with both the cerium content in the sample and the sintering temperature. Nevertheless, such a deviation from the ideal O/M = 2.00 ratio was found to generate only moderate structural disorder from EXAFS data at the U-L3 edge as all the samples retained the fluorite-type structure of the UO2 and CeO2 parent compounds. The determination of accurate lattice parameters owing to S-PXRD measurements led to complementing the data reported in the literature by various authors. These data were consistent with an empirical relation linking the unit cell parameter, the chemical composition, and the O/M stoichiometry, showing that the latter can be evaluated simply within a ± 0.02 uncertainty.

Oxidation of Micro- and Nanograined UO2 Pellets by In Situ Synchrotron X-ray Diffraction.

When in contact with oxidizing media, UO2 pellets used as nuclear fuel may transform into U4O9, U3O7, and U3O8. The latter starts forming by stress-induced phase transformation only upon cracking of the pristine U3O7 and is associated with a 36% volumetric expansion with respect to the initial UO2. This may pose a safety issue for spent nuclear fuel (SNF) management as it could imply a confinement failure and hence dispersion of radionuclides within the environment. In this work, UO2 with different grain sizes (representative of the grain size in different radial positions in the SNF) was oxidized in air at 300 °C, and the oxidation mechanisms were investigated using in situ synchrotron X-ray diffraction. The formation of U3O8 was detected only in UO2 pellets with larger grains (3.08 ± 0.06 µm and 478 ± 17 nm), while U3O8 did not develop in sintered UO2 with a grain size of 163 ± 9 nm. This result shows that, in dense materials, a sufficiently fine microstructure inhibits both the cracking of U3O7 and the subsequent formation of U3O8. Hence, the nanostructure prevents the material from undergoing significant volumetric expansion. Considering that the peripheral region of SNF is constituted by the high burnup structure, characterized by 100-300 nm-sized grains and micrometric porosity, these findings are relevant for a better understanding of the spent nuclear fuel behavior and hence for the safety of the nuclear waste storage.

Selenium Nanowire Formation by Reacting Selenate with Magnetite.

The mobility of 79Se, a fission product of 235U and long-lived radioisotope, is an important parameter in the safety assessment of radioactive nuclear waste disposal systems. Nonradioactive selenium is also an important contaminant of drainage waters from black shale mountains and coal mines. Highly mobile and soluble in its high oxidation states, selenate (Se(VI)O42-) and selenite (Se(IV)O32-) oxyanions can interact with magnetite, a mineral present in anoxic natural environments and in steel corrosion products, thereby being reduced and consequently immobilized by forming low-solubility solids. Here, we investigated the sorption and reduction capacity of synthetic nanomagnetite toward Se(VI) at neutral and acidic pH, under reducing, oxygen-free conditions. The additional presence of Fe(II)aq, released during magnetite dissolution at pH 5, has an effect on the reduction kinetics. X-ray absorption spectroscopy analyses revealed that, at pH 5, trigonal gray Se(0) formed and that sorbed Se(IV) complexes remained on the nanoparticle surface during longer reaction times. The Se(0) nanowires grew during the reaction, which points to a complex transport mechanism of reduced species or to active reduction sites at the tip of the Se(0) nanowires. The concomitant uptake of aqueous Fe(II) and Se(VI) ions is interpreted as a consequence of small pH oscillations that result from the Se(VI) reduction, leading to a re-adsorption of aqueous Fe(II) onto the magnetite, renewing its reducing capacity. This effect is not observed at pH 7, where we observed only the formation of Se(0) with slow kinetics due to the formation of an oxidized maghemite layer. This indicates that the presence of aqueous Fe(II) may be an important factor to be considered when examining the environmental reactivity of magnetite.

A spectroscopic hike in the U-O phase diagram.

The U-O phase diagram is of paramount interest for nuclear-related applications and has therefore been extensively studied. Experimental data have been gathered to feed the thermodynamic calculations and achieve an optimization of the U-O system modelling. Although considered as well established, a critical assessment of this large body of experimental data is necessary, especially in light of the recent development of new techniques applicable to actinide materials. Here we show how in situ X-ray absorption near-edge structure (XANES) is suitable and relevant for phase diagram determination. New experimental data points have been collected using this method and discussed in regard to the available data. Comparing our experimental data with thermodynamic calculations, we observe that the current version of the U-O phase diagram misses some experimental data in specific domains. This lack of experimental data generates inaccuracy in the model, which can be overcome using in situ XANES. Indeed, as shown in the paper, this method is suitable for collecting experimental data in non-ambient conditions and for multiphasic systems.

ROBL-II at ESRF: a synchrotron toolbox for actinide research.

ROBL-II provides four different experimental stations to investigate actinide and other alpha- and beta-emitting radionuclides at the new EBS storage ring of ESRF within an energy range of 3 to 35 keV. The XAFS station consists of a highly automatized, high sample throughput installation in a glovebox, to measure EXAFS and conventional XANES of samples routinely at temperatures down to 10 K, and with a detection limit in the sub-p.p.m. range. The XES station with its five bent-crystal analyzer, Johann-type setup with Rowland circles of 1.0 and 0.5 m radii provides high-energy resolution fluorescence detection (HERFD) for XANES, XES, and RIXS measurements, covering both actinide L and M edges together with other elements accessible in the 3 to 20 keV energy range. The six-circle heavy duty goniometer of XRD-1 is equipped for both high-resolution powder diffraction as well as surface-sensitive CTR and RAXR techniques. Single crystal diffraction, powder diffraction with high temporal resolution, as well as X-ray tomography experiments can be performed at a Pilatus 2M detector stage (XRD-2). Elaborate radioprotection features enable a safe and easy exchange of samples between the four different stations to allow the combination of several methods for an unprecedented level of information on radioactive samples for both fundamental and applied actinide and environmental research.

Charge Distribution in U1-xCexO2+y Nanoparticles.

In view of safe management of the nuclear wastes, a sound knowledge of the atomic-scale properties of U1-xMxO2+y nanoparticles is essential. In particular, their cation valences and oxygen stoichiometries are of great interest as these properties drive their diffusion and migration behaviors into the environment. Here, we present an in-depth study of U1-xCexO2+y, over the full compositional domain, by combining X-ray diffraction and high-energy resolution fluorescence detection X-ray absorption near-edge structure. We show, on one hand, the coexistence of UIV, UV, and UVI and, on the other hand, that the fluorite structure is maintained despite this charge distribution.

Size Dependence of Lattice Parameter and Electronic Structure in CeO2 Nanoparticles.

Intrinsic properties of a compound (e.g., electronic structure, crystallographic structure, optical and magnetic properties) define notably its chemical and physical behavior. In the case of nanomaterials, these fundamental properties depend on the occurrence of quantum mechanical size effects and on the considerable increase of the surface to bulk ratio. Here, we explore the size dependence of both crystal and electronic properties of CeO2 nanoparticles (NPs) with different sizes by state-of-the art spectroscopic techniques. X-ray diffraction, X-ray photoelectron spectroscopy, and high-energy resolution fluorescence-detection hard X-ray absorption near-edge structure (HERFD-XANES) spectroscopy demonstrate that the as-synthesized NPs crystallize in the fluorite structure and they are predominantly composed of CeIV ions. The strong dependence of the lattice parameter with the NPs size was attributed to the presence of adsorbed species at the NPs surface thanks to Fourier transform infrared spectroscopy and thermogravimetric analysis measurements. In addition, the size dependence of the t2g states in the Ce LIII XANES spectra was experimentally observed by HERFD-XANES and confirmed by theoretical calculations.

Deciphering the Crystal Structure of a Scarce 1D Polymeric Thorium Peroxo Sulfate.

The preparation and structural characterization of an original Th peroxo sulfate dihydrate, crystallizing at room temperature in the form of stable 1D polymeric microfibres is described. A combination of laboratory and synchrotron techniques allowed solution of the structure of the Th(O2 )(SO4 )(H2 O)2 compound, which crystallizes in a new structure type in the space group Pna21 of the orthorhombic crystal system. Particularly, the peroxide ligand coordinates to the Th cations in an unusual µ3 -η2 :η2 :η2 bridging mode, forming an infinite 1D chain decorated with sulfato ligands exhibiting simultaneously monodentate and bidentate coordination modes.

Peculiar Thermal Behavior of UO2 Local Stucture.

Most materials expand with temperature because of the anharmonicity of lattice vibration, and only a few shrink with increasing temperature. UO2, whose thermal properties are of significant importance for the safe use of nuclear energy, was considered for a long time to belong to the first group. This view was challenged by recent in situ synchrotron X-ray diffraction measurements, showing an unusual thermal decrease of the U-O distances. This thermal shrinkage was interpreted as a consequence of the splitting of the U-O distances due to a change in the U local order from Fm3̅ m to Pa3̅. In contrast to these previous investigations and using an element-specific synchrotron-based spectroscopic method, we show here that the U sublattice remains locally of the fluorite type from 50 to 1265 K, and that the decrease of the first U-O bond lengths is associated with an increase of the disorder.

Aliovalent Cation Substitution in UO2: Electronic and Local Structures of U1-yLayO2±x Solid Solutions.

For nuclear fuel related applications, the oxygen stoichiometry of mixed oxides U1-yMyO2±x is an essential property as it affects fuel properties and may endanger the safe operation of nuclear reactors. A careful review of the open literature indicates that this parameter is difficult to assess properly and that the nature of the defects, i.e., oxygen vacancies or UV, in aliovalent cation-doped UO2 is still subject to controversy. To confirm the formation of UV, we have investigated the room-temperature stable U1-yLayO2±x phase using several experimental methods (e.g., XRD, XANES, and NMR) confirmed by theoretical calculations. This paper presents the experimental proof of UV and its effect we identified in both electronic and local structure. We observe that UV is formed in quasi-equimolar proportion as LaIII in U1-yLayO2±x (y = 0.06, 0.11, and 0.22) solid solutions. The fluorite structure is maintained despite the cationic substitution, but the local structure is affected as variations of the interatomic distances are found. Therefore, we provide here the definitive proof that the substitution of UIV with LaIII is not accommodated by the creation of O vacancies as has often been assumed. The UO2 fluorite structure compensates the incorporation of an aliovalent cation by the formation of UV in quasi-equimolar proportions.

Optimization of Uranium-Doped Americium Oxide Synthesis for Space Application.

Americium 241 is a potential alternative to plutonium 238 as an energy source for missions into deep space or to the dark side of planetary bodies. In order to use the 241Am isotope for radioisotope thermoelectric generator or radioisotope heating unit (RHU) production, americium materials need to be developed. This study focuses on the stabilization of a cubic americium oxide phase using uranium as the dopant. After optimization of the material preparation, (Am0.80U0.12Np0.06Pu0.02)O1.8 has been successfully synthesized to prepare a 2.96 g pellet containing 2.13 g of 241Am for fabrication of a small scale RHU prototype. Compared to the use of pure americium oxide, the use of uranium-doped americium oxide leads to a number of improvements from a material properties and safety point of view, such as good behavior under sintering conditions or under alpha self-irradiation. The mixed oxide is a good host for neptunium (i.e., the 241Am daughter element), and it has improved safety against radioactive material dispersion in the case of accidental conditions.

Structural Properties and Charge Distribution of the Sodium Uranium, Neptunium, and Plutonium Ternary Oxides: A Combined X-ray Diffraction and XANES Study.

The charge distributions in α-Na2UO4, Na3NpO4, α-Na2NpO4, Na4NpO5, Na5NpO6, Na2PuO3, Na4PuO5, and Na5PuO6 are investigated in this work using X-ray absorption near-edge structure (XANES) spectroscopy at the U-L3, Np-L3, and Pu-L3 edges. In addition, a Rietveld refinement of monoclinic Na2PuO3, in space group C2/c, is reported for the first time, and the existence of the isostructural Na2NpO3 phase is revealed. In contrast to measurements in solution, the number of published XANES data for neptunium and plutonium solid phases with a valence state higher than IV is very limited. The present results cover a wide range of oxidation states, namely, IV to VII, and can serve as reference for future investigations. The sodium actinide series show a variety of local coordination geometries, and correlations between the shape of the XANES spectra and the local structural environments are discussed herein.

Structural Investigation of (U0.7Pu0.3)O2-x Mixed Oxides.

Uranium-plutonium mixed oxide containing 30% of plutonium is a candidate fuel for several fast neutron and accelerator driven reactor systems. In this work, a detailed structural investigation on sol-gel synthesized stoichiometric U0.7Pu0.3O2.00 and substoichiometric U0.7Pu0.3O2-x, using X-ray diffraction (XRD), oxygen 17 magic angle spinning nuclear magnetic resonance ((17)O MAS NMR) and X-ray absorption spectroscopy is described. As observed by XRD, the stoichiometric U0.7Pu0.3O2.00 is monophasic with a lattice parameter in good agreement with Vegard's law, while the substoichiometric U0.7Pu0.3O2-x material is biphasic. Solid solution ideality in terms of a random distribution of metal atoms is proven for U0.7Pu0.3O2.00 with (17)O MAS NMR. X-ray absorption near-edge structure (XANES) spectroscopy shows the presence of plutonium(III) in U0.7Pu0.3O2-x. Extended X-ray absorption fine-structure (EXAFS) spectroscopy indicates a similar local structure around both cations, and comparison with XRD indicates a close similarity between uranium and plutonium local structures and the long-range ordering.

A new look at the structural properties of trisodium uranate Na3UO4.

The crystal structure of trisodium uranate, which forms following the interaction between sodium and hyperstoichiometric urania, has been solved for the first time using powder X-ray and neutron diffraction, X-ray absorption near-edge structure spectroscopy, and solid-state (23)Na multiquantum magic angle spinning nuclear magnetic resonance. The compound, isostructural with Na3BiO4, has monoclinic symmetry, in space group P2/c. Moreover, it has been shown that this structure can accommodate some cationic disorder, with up to 16(2)% sodium on the uranium site, corresponding to the composition α-Na3(U1-x,Nax)O4 (0 < x < 0.18). The α phase adopts a mixed valence state with the presence of U(V) and U(VI). The two polymorphs of this compound described in the literature, m- and ß-Na3(U1-x,Nax)O4, have also been investigated, and their relationship to the α phase has been established. The completely disordered low-temperature cubic phase corresponds to a metastable phase. The semiordered high-temperature ß phase is cubic, in space group Fd3̅m.

Presence of uranium(V) during uranium(VI) reduction by Desulfosporosinus hippei DSM 8344T.

Microbial U(VI) reduction influences uranium mobility in contaminated subsurface environments and can affect the disposal of high-level radioactive waste by transforming the water-soluble U(VI) to less mobile U(IV). The reduction of U(VI) by the sulfate-reducing bacterium Desulfosporosinus hippei DSM 8344T, a close phylogenetic relative to naturally occurring microorganism present in clay rock and bentonite, was investigated. D. hippei DSM 8344T showed a relatively fast removal of uranium from the supernatants in artificial Opalinus Clay pore water, but no removal in 30 mM bicarbonate solution. Combined speciation calculations and luminescence spectroscopic investigations showed the dependence of U(VI) reduction on the initial U(VI) species. Scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy showed uranium-containing aggregates on the cell surface and some membrane vesicles. By combining different spectroscopic techniques, including UV/Vis spectroscopy, as well as uranium M4-edge X-ray absorption near-edge structure recorded in high-energy-resolution fluorescence-detection mode and extended X-ray absorption fine structure analysis, the partial reduction of U(VI) could be verified, whereby the formed U(IV) product has an unknown structure. Furthermore, the U M4 HERFD-XANES showed the presence of U(V) during the process. These findings offer new insights into U(VI) reduction by sulfate-reducing bacteria and contribute to a comprehensive safety concept for a repository for high-level radioactive waste.

In situ study of the solid-state formation of U(1-x)Am(x)O(2±Î´) solid solution.

In order to reduce the nuclear waste inventory and radiotoxicity, U(1-x)Am(x)O(2±Î´) materials are promising fuels for heterogeneous transmutation. In this context, they are generally fabricated from UO(2+δ) and AmO(2-δ) dioxide powders. In the subsequent solid solution, americium is assumed to be trivalent whereas uranium exhibits a mixed-valence (+IV/+V) state. However, no formation mechanisms were ever evidenced and, more particularly, it was not possible to know whether the reduction of Am(IV) to Am(III) occurs before the solid-solution formation, or only once it is established. In this study, we used high-temperature X-ray diffraction on a UO(2±Î´)/AmO(2-δ) (15 mol %) mixture to observe in situ the formation of the U(1-x)Am(x)O(2±Î´) solid solution. We show that UO(2+δ) is, at relatively low temperature (<700 K), oxidized to U(4)O(9-δ), which is likely to be caused by oxygen release from the simultaneous AmO(2-δ) reduction to cubic Am(2)O(3±Î´). Cubic Am(2)O(3+δ) then transforms to hexagonal Am(2)O(3) at 1300 K. Thus, the initial Am(IV) is fully reduced to Am(III) before the solid solution starts forming at 1740 K. The UO(2) fluorite phase vanishes after 4 h at 1970 K, indicating that the formation of the solid solution is completed, which proves that this solid solution is formed after the complete reduction of Am(IV) to Am(III).

Pbx(OH)y cluster formation and anomalous thermal behaviour in STI framework-type zeolites.

For the first time, the structural investigation of a Pb-exchanged zeolite (Pb13.4(OH)10Al17.4Si54.6O144 ∙38H2O) with STI framework type, revealed a highly unusual and intriguing sudden volume increase under continuous heating. Understanding the fundamental mechanisms leading to such an unusual behaviour is essential for technological applications and interpretation of chemical bonding in zeolites. The dehydration was tracked in situ from 25 to 450 °C by single crystal X-ray diffraction, infrared and X-ray absorption spectroscopy. Further interpretation of the experimental observations was supported by ab initio molecular dynamics simulations. Initially, Pb-STI unit-cell volume contracts (ΔV = - 3.5%) from 25 to 100 °C. This agrees with the trend observed in STI zeolites. Surprisingly, at 125 °C, the framework expanded (ΔV = + 2%), adopting a configuration, which resembles that of the room temperature structure. Upon heating, the structure loses H2O but no de-hydroxylation occurred. The key mechanism leading to the sudden volume increase was found to be the formation of Pbx(OH)y clusters, which prevent the shrinking of the channels, rupture of the tetrahedral bonds and occlusion of the pores. This zeolite has therefore an increased thermal stability with respect to other STI metal-exchanged zeolites, with important consequences on its applications.

Local structure and charge distribution in mixed uranium-americium oxides: effects of oxygen potential and Am content.

Partitioning and transmutation (P&T) of minor actinides (MA) is currently studied to reduce the nuclear waste inventory. In this context, the fabrication of MA bearing materials is of great interest to achieve an effective recycling of these highly radioactive elements. To ensure the in-pile behavior, nuclear oxide fuels have to respect several criteria including preservation of the fluorite structure and defined oxygen to metal ratio (O/M). In the case of Am bearing materials, such as U(1-y)Am(y)O(2±x) (y = 0.10, 0.15, 0.20), the O/M determination is quite challenging using conventional methods (TGA, XRD) because of the particular thermodynamic properties of Am. Despite the lack of experimental data in the U-Am-O system, thermodynamical models are currently developed to effectively assess the O/M ratio. In this work, the O/M ratios were calculated for various oxygen potentials using the cation molar fraction determined by XAS measurements. These results are an important addition to the experimental data available for the U-Am-O system. Moreover, XRD and XAS indicated that the fabrication of fluorite U(1-y)Am(y)O(2±x) solid solution was achieved for all Am content and oxygen potentials investigated. On the basis of the molar fraction, a description of the solid solution was proposed depending on the considered sintering conditions. Finally, the occurrence of an unexpected charge compensation mechanism was pointed out.

Probing the local structure of nanoscale actinide oxides: a comparison between PuO2 and ThO2 nanoparticles rules out PuO2+x hypothesis.

Actinide research at the nanoscale is gaining fundamental interest due to environmental and industrial issues. The knowledge of the local structure and speciation of actinide nanoparticles, which possibly exhibit specific physico-chemical properties in comparison to bulk materials, would help in a better and reliable description of their behaviour and reactivity. Herein, the synthesis and relevant characterization of PuO2 and ThO2 nanoparticles displayed as dispersed colloids, nanopowders, or nanostructured oxide powders allow to establish a clear relationship between the size of the nanocrystals constituting these oxides and their corresponding An(iv) local structure investigated by EXAFS spectroscopy. Particularly, the first oxygen shell of the probed An(iv) evidences an analogous behaviour for both Pu and Th oxides. This observation suggests that the often observed and controversial splitting of the Pu-O shell on the Fourier transformed EXAFS signal of the PuO2 samples is attributed to a local structural disorder driven by a nanoparticle surface effect rather than to the presence of PuO2+x species.

On the Role of the Electrical Field in Spark Plasma Sintering of UO2+x.

The electric field has a large effect on the stoichiometry and grain growth of UO2+x during Spark Plasma Sintering. UO2+x is gradually reduced to UO2.00 as a function of sintering temperature and time. A gradient in the oxidation state within the pellets is observed in intermediate conditions. The shape of the gradient depends unequivocally on the direction of the electrical field. The positive surface of the pellet shows a higher oxidation state compared to the negative one. An area with larger grain size is found close to the positive electrode, but not in contact with it. We interpret these findings with the redistribution of defects under an electric field, which affect the stoichiometry of UO2+x and thus the cation diffusivity. The results bear implications for understanding the electric field assisted sintering of UO2 and non-stoichiometric oxides in general.