RESUMO
Stomatal pores are vital for the diffusion of gasses into and out of land plants and are, therefore, gatekeepers for photosynthesis and transpiration. Although much published literature has described the intercellular signaling and transcriptional regulators involved in early stomatal development, little is known about the cellular details of the local separation between sister guard cells that give rise to the stomatal pore or how formation of this pore is achieved. Using three-dimensional (3D) time-lapse imaging, we found that stomatal pore formation in Arabidopsis (Arabidopsis thaliana) is a highly dynamic process involving pore initiation and enlargement and traverses a set of morphological milestones in 3D. Confocal imaging data revealed an enrichment of exocytic machinery, de-methyl-esterified pectic homogalacturonan (HG), and an HG-degrading enzyme at future pore sites, suggesting that both localized HG deposition and degradation might function in pore formation. By manipulating HG modification via enzymatic, chemical, and genetic perturbations in seedling cotyledons, we found that augmenting HG modification promotes pore formation, whereas preventing HG de-methyl-esterification delays pore initiation and inhibits pore enlargement. Through mechanical modeling and experimentation, we tested whether pore formation is an outcome of sister guard cells being pulled away from each other upon turgor increase. Osmotic treatment to reduce turgor pressure did not prevent pore initiation but did lessen pore enlargement. Together, these data provide evidence that HG delivery and modification, and guard cell pressurization, make functional contributions to stomatal pore initiation and enlargement.
Assuntos
Arabidopsis/citologia , Pectinas/metabolismo , Estômatos de Plantas/citologia , Arabidopsis/metabolismo , Modelos Biológicos , Pressão Osmótica , Pectinas/genética , Imagem com Lapso de TempoRESUMO
Plant cell separation and expansion require pectin degradation by endogenous pectinases such as polygalacturonases, few of which have been functionally characterized. Stomata are a unique system to study both processes because stomatal maturation involves limited separation between sister guard cells and stomatal responses require reversible guard cell elongation and contraction. However, the molecular mechanisms for how stomatal pores form and how guard cell walls facilitate dynamic stomatal responses remain poorly understood. We characterized POLYGALACTURONASE INVOLVED IN EXPANSION3 (PGX3), which is expressed in expanding tissues and guard cells. PGX3-GFP localizes to the cell wall and is enriched at sites of stomatal pore initiation in cotyledons. In seedlings, ablating or overexpressing PGX3 affects both cotyledon shape and the spacing and pore dimensions of developing stomata. In adult plants, PGX3 affects rosette size. Although stomata in true leaves display normal density and morphology when PGX3 expression is altered, loss of PGX3 prevents smooth stomatal closure, and overexpression of PGX3 accelerates stomatal opening. These phenotypes correspond with changes in pectin molecular mass and abundance that can affect wall mechanics. Together, these results demonstrate that PGX3-mediated pectin degradation affects stomatal development in cotyledons, promotes rosette expansion, and modulates guard cell mechanics in adult plants.
Assuntos
Proteínas de Arabidopsis/metabolismo , Arabidopsis/metabolismo , Estômatos de Plantas/metabolismo , Plântula/metabolismo , Arabidopsis/genética , Proteínas de Arabidopsis/genética , Regulação da Expressão Gênica de Plantas/genética , Regulação da Expressão Gênica de Plantas/fisiologia , Folhas de Planta/genética , Folhas de Planta/metabolismo , Estômatos de Plantas/genética , Plântula/genéticaRESUMO
In plants, stomatal guard cells are one of the most dynamic cell types, rapidly changing their shape and size in response to environmental and intrinsic signals to control gas exchange at the plant surface. Quantitative and systematic knowledge of the biomechanical underpinnings of stomatal dynamics will enable strategies to optimize stomatal responsiveness and improve plant productivity by enhancing the efficiency of photosynthesis and water use. Recent developments in microscopy, mechanical measurements, and computational modeling have revealed new insights into the biomechanics of stomatal regulation and the genetic, biochemical, and structural origins of how plants achieve rapid and reliable stomatal function by tuning the mechanical properties of their guard cell walls. This review compares historical and recent experimental and modeling studies of the biomechanics of stomatal complexes, highlighting commonalities and contrasts between older and newer studies. Key gaps in our understanding of stomatal functionality are also presented, along with assessments of potential methods that could bridge those gaps.
Assuntos
Parede Celular/química , Estômatos de Plantas/química , Fenômenos Biomecânicos , Modelos Biológicos , Plantas/químicaRESUMO
Pectin is the most abundant component of primary cell walls in eudicot plants. The modification and degradation of pectin affects multiple processes during plant development, including cell expansion, organ initiation, and cell separation. However, the extent to which pectin degradation by polygalacturonases affects stem development and secondary wall formation remains unclear. Using an activation tag screen, we identified a transgenic Arabidopsis thaliana line with longer etiolated hypocotyls, which overexpresses a gene encoding a polygalacturonase. We designated this gene as POLYGALACTURONASE INVOLVED IN EXPANSION2 (PGX2), and the corresponding activation tagged line as PGX2AT . PGX2 is widely expressed in young seedlings and in roots, stems, leaves, flowers, and siliques of adult plants. PGX2-GFP localizes to the cell wall, and PGX2AT plants show higher total polygalacturonase activity and smaller pectin molecular masses than wild-type controls, supporting a function for this protein in apoplastic pectin degradation. A heterologously expressed, truncated version of PGX2 also displays polygalacturonase activity in vitro. Like previously identified PGX1AT plants, PGX2AT plants have longer hypocotyls and larger rosette leaves, but they also uniquely display early flowering, earlier stem lignification, and lodging stems with enhanced mechanical stiffness that is possibly due to decreased stem thickness. Together, these results indicate that PGX2 both functions in cell expansion and influences secondary wall formation, providing a possible link between these two developmental processes.
Assuntos
Proteínas de Arabidopsis/metabolismo , Arabidopsis/crescimento & desenvolvimento , Arabidopsis/metabolismo , Hipocótilo/crescimento & desenvolvimento , Hipocótilo/metabolismo , Folhas de Planta/metabolismo , Caules de Planta/metabolismo , Arabidopsis/genética , Proteínas de Arabidopsis/genética , Parede Celular/metabolismo , Regulação da Expressão Gênica de Plantas/genética , Regulação da Expressão Gênica de Plantas/fisiologia , Hipocótilo/genética , Lignina/metabolismo , Pectinas/metabolismo , Folhas de Planta/genética , Folhas de Planta/crescimento & desenvolvimento , Caules de Planta/genética , Caules de Planta/crescimento & desenvolvimento , Plantas Geneticamente Modificadas/genética , Plantas Geneticamente Modificadas/crescimento & desenvolvimento , Plantas Geneticamente Modificadas/metabolismo , Poligalacturonase/metabolismoRESUMO
UNLABELLED: ⢠PREMISE OF THE STUDY: Quantitative measurements of water's effects on the tension response of plant tissue will assist in understanding the regulatory mechanism underlying expansive growth. Such measurements should be multiscale in nature to account for plants' hierarchical structure.⢠METHODS: Outer onion epidermal tissues were cut and bonded to uniaxial displacement-controlled mechanical loading devices to apply and measure the force on the sample. Fluorescent polystyrene beads (500 nm in diameter) were dispersed on the sample surface under various levels of tensile load conditions to obtain displacement maps with a confocal fluorescent microscope. The resulting strain was measured using a digital image correlation technique by tracking individual bead displacements. The applied forces were obtained by measuring the displacement of the calibrated force-sensing device. Tissue- and cell-scale mechanical properties were quantified by calculating the applied stress and the corresponding global and local strains.⢠KEY RESULTS: The Young's modulus values of individual cell walls of dehydrated and rehydrated samples were 3.0 ± 1.0 GPa and 0.4 ± 0.2 GPa, respectively, and are different from the Young's modulus values of the global tissue-scale dehydrated and rehydrated samples, which were 1.9 ± 0.3 GPa and 0.08 ± 0.02 GPa, respectively. Poisson's ratio increased more than 3-fold due to hydration.⢠CONCLUSION: The results on global, cell-to-cell, and point-to-point mechanical property variations suggest the importance of the mechanical contribution of extracellular features including the middle lamella, cell shape, and dimension. This study shows that a multiscale investigation is essential for fundamental insights into the hierarchical deformation of biological systems.
Assuntos
Biofísica/métodos , Cebolas/fisiologia , Fenômenos Biomecânicos , Módulo de Elasticidade , Reprodutibilidade dos Testes , Estresse Mecânico , Resistência à TraçãoRESUMO
PREMISE OF THE STUDY: The molecular mechanisms regulating the expansive growth of the plant cell wall have yet to be fully understood. The recent development of a computational cell wall model allows quantitative examinations of hypothesized cell wall loosening mechanisms. METHODS: Computational cell wall network (CWN) models were generated using cellulose microfibrils (CMFs), hemicelluloses (HCs), and their interactions (CMF-HC). For each component, a range of stiffness values, representing various situations hypothesized as potential cell-wall-loosening mechanisms, were used in the calculation of the overall stiffness of the computational CWN model. Thus, a critical mechanism of the loosening of the primary cell wall was investigated using a computational approach by modeling the molecular structure. KEY RESULTS: The increase in the stiffness equivalent of the CMF-HC interaction results in an increase in the Young's modulus of the CWN. In the major growth direction, the CWN stiffness is most sensitive to the CMF-HC interaction (75%). HC stiffness contributes moderately (24%) to the change in the CWN stiffness, whereas the CMF contribution is marginal (1%). Minor growth direction exhibited a similar trend except that the contributions of CMFs and HCs are higher than for the major growth direction. CONCLUSIONS: The stiffness of the CMF-HC interaction is the most critical mechanical component in altering stiffness of the CWN model, which supports the hypothesized mechanism of expansin's role in efficient loosening of the plant cell wall by disrupting HC binding to CMFs. The comparison to experiments suggests additional load-bearing mechanisms in CMF-HC interactions.
Assuntos
Parede Celular/metabolismo , Celulose/metabolismo , Módulo de Elasticidade , Microfibrilas/metabolismo , Células Vegetais/metabolismo , Plantas/metabolismo , Polissacarídeos/metabolismo , Modelos BiológicosRESUMO
UNLABELLED: ⢠PREMISE OF THE STUDY: The cells in plant tissue are joined together by a distinct layer called the middle lamella (ML). Understanding the mechanical properties of the ML is crucial in studying how tissue-level mechanical properties emerge from the subcellular-level mechanical properties. However, the nanoscale size of the ML presents formidable challenges to its characterization as a separate layer. Consequently, the mechanical properties of the ML under tensile loading are as yet unknown.⢠METHODS: Here, we characterize the ML from a subcellular sample excised from two adjacent cells and composed of two wall fragments and a single line of ML in between. Two techniques, cryotome sectioning and milling with a focused ion beam, were used to prepare ML samples, and tensile experiments were performed using microelectromechanical system (MEMS) tensile testing devices.⢠KEY RESULTS: Our test results showed that even at a subcellular scale, the ML appears to be stronger than the wall fragments. There was also evidence that the ML attached at the corner of cells more strongly than at the rest of the contact area. The contribution of the additional ML contact area was estimated to be 40.6 MPa. Wall fragment samples containing an ML layer were also significantly stronger (p < 0.05) than the wall fragments without an ML layer.⢠CONCLUSIONS: The tensile properties of the ML might not have a major impact on the tissue-scale mechanical properties. This conclusion calls for further study of the ML, including characterization under shear loading conditions and elucidation of the contributions of other extracellular parameters, such as cell size and shape, to the overall tissue-level mechanical response.
Assuntos
Cebolas/fisiologia , Epiderme Vegetal/fisiologia , Resistência à Tração , Fenômenos Biomecânicos , Sistemas Microeletromecânicos , Estresse MecânicoRESUMO
A primary plant cell wall network was computationally modeled using the finite element approach to study the hypothesis of hemicellulose (HC) tethering with the cellulose microfibrils (CMFs) as one of the major load-bearing mechanisms of the growing cell wall. A computational primary cell wall network fragment (10 × 10 µm) comprising typical compositions and properties of CMFs and HC was modeled with well-aligned CMFs. The tethering of HC to CMFs is modeled in accordance with the strength of the hydrogen bonding by implementing a specific load-bearing connection (i.e. the joint element). The introduction of the CMF-HC interaction to the computational cell wall network model is a key to the quantitative examination of the mechanical consequences of cell wall structure models, including the tethering HC model. When the cell wall network models with and without joint elements were compared, the hydrogen bond exhibited a significant contribution to the overall stiffness of the cell wall network fragment. When the cell wall network model was stretched 1% in the transverse direction, the tethering of CMF-HC via hydrogen bonds was not strong enough to maintain its integrity. When the cell wall network model was stretched 1% in the longitudinal direction, the tethering provided comparable strength to maintain its integrity. This substantial anisotropy suggests that the HC tethering with hydrogen bonds alone does not manifest sufficient energy to maintain the integrity of the cell wall during its growth (i.e. other mechanisms are present to ensure the cell wall shape).
Assuntos
Parede Celular/química , Modelos Biológicos , Modelos Moleculares , Células Vegetais/química , Fenômenos Biomecânicos , Celulose/química , Módulo de Elasticidade , Ligação de Hidrogênio , Microfibrilas/química , Polissacarídeos/química , TermodinâmicaRESUMO
PREMISE OF THE STUDY: The results of published studies investigating the tissue-scale mechanical properties of plant cell walls are confounded by the unknown contributions of the middle lamella and the shape and size of each cell. However, due to their microscale size, cell walls have not yet been characterized at the wall fragment level under tensile loading. It is imperative to understand the stress-strain behavior of cell wall fragments to relate the wall's mechanical properties to its architecture. ⢠METHODS: This study reports a novel method used to characterize wall fragments under tensile loading. Cell wall fragments from onion outer epidermal peels were cut to the desired size (15 × 5 µm) using the focused ion beam milling technique, and these fragments were manipulated onto a microelectromechanical system (MEMS) tensile testing device. The stress-strain behavior of the wall fragments both in the major and minor growth directions were characterized in vacuo. ⢠KEY RESULTS: The measured mean modulus, fracture strength, and fracture strain in the major growth direction were 3.7 ± 0.8 GPa, 95.5 ± 24.1 MPa, and 3.0 ± 0.5%, respectively. The corresponding properties along the minor growth direction were 4.9 ± 1.2 GPa, 159 ± 48.4 MPa, and 3.8 ± 0.5%, respectively. ⢠CONCLUSIONS: The fracture strength and fracture strain were significantly different along the major and minor growth directions, the wall fragment level modulus of elasticity anisotropy for a dehydrated cell wall was 1.23, suggesting a limited anisotropy of the cell wall itself compared with tissue-scale results.
Assuntos
Parede Celular/fisiologia , Parede Celular/ultraestrutura , Cebolas/citologia , Epiderme Vegetal/ultraestrutura , Fenômenos Biomecânicos , Fenômenos Eletrofisiológicos , Epiderme Vegetal/fisiologiaRESUMO
The majority of Salmonella Enteritidis outbreaks have been related to the consumption of raw or undercooked eggs or egg-containing foods. Therefore, the U.S. Department of Agriculture mandates egg washing for all graded eggs by use of a detergent solution and sanitizer. These agencies and the egg industry have been investigating alternative decontamination techniques, which could better serve the public, minimize costs, and benefit both the public and the industry. Pulsed UV light is an emerging technology that is used to inactivate microorganisms quickly. In this study, the effectiveness of pulsed UV light was evaluated for the decontamination of eggshells. Eggs inoculated with Salmonella Enteritidis on the top surface at the equator were treated with pulsed UV light 1 to 30 s, at a distance of 9.5 and 14.5 cm from the UV lamp in a laboratory-scale, pulsed UV light chamber. Three eggs were used per treatment in each repetition, except for quality measurements, which involved six eggs per treatment in each repetition. A maximum log reduction of 5.3 CFU/cm2 was obtained after a 20-s treatment at 9.5 cm below the UV lamp at a total dose of 23.6+/-0.1 J/cm2, without any visual damage to the egg. After a 30-s treatment at 9.5 and 14.5 cm, the temperature of eggshell surfaces increased by 16.3 and 13.3 degrees C, respectively. Energy usage increased up to 35.3+/-0.1 and 24.8+/-0.1 J/cm2, after 30-s treatments at 9.5 and 14.5 cm, respectively. The effect of pulsed UV light treatments on egg quality was also evaluated. Pulsed UV-light treatments for 3, 10, and 20s at either 9.5 or 14.5 cm did not change the albumen height, eggshell strength, or cuticle presence significantly (P<0.05). This study demonstrated that pulsed UV light has potential to decontaminate eggshell surfaces.
Assuntos
Casca de Ovo/microbiologia , Ovos/normas , Conservação de Alimentos/métodos , Salmonella enteritidis/efeitos da radiação , Raios Ultravioleta , Animais , Contagem de Colônia Microbiana , Surtos de Doenças , Relação Dose-Resposta à Radiação , Ovos/microbiologia , Ovos/efeitos da radiação , Microbiologia de Alimentos , Intoxicação Alimentar por Salmonella/prevenção & controle , Salmonella enteritidis/crescimento & desenvolvimento , Fatores de TempoRESUMO
Stomata function as osmotically tunable pores that facilitate gas exchange at the surface of plants. Stomatal opening and closure are regulated by turgor changes in guard cells that result in mechanically regulated deformations of guard cell walls. However, how the molecular, architectural, and mechanical heterogeneities that exist in guard cell walls affect stomatal dynamics is unclear. In this work, stomata of wild type Arabidopsis thaliana plants or of mutants lacking normal cellulose, hemicellulose, or pectins were experimentally induced to close or open. Three-dimensional images of these stomatal complexes were collected using confocal microscopy, images were landmarked, and three-dimensional finite element models (FEMs) were constructed for each complex. Stomatal opening was simulated with a 5 MPa turgor increase. By comparing experimentally measured and computationally modeled changes in stomatal geometry across genotypes, anisotropic mechanical properties of guard cell walls were determined and mapped to cell wall components. Deficiencies in cellulose or hemicellulose were both predicted to stiffen guard cell walls, but differentially affected stomatal pore area and the degree of stomatal opening. Additionally, reducing pectin molecular mass altered the anisotropy of calculated shear moduli in guard cell walls and enhanced stomatal opening. Based on the unique architecture of guard cell walls and our modeled changes in their mechanical properties in cell wall mutants, we discuss how each polysaccharide class contributes to wall architecture and mechanics in guard cells. This study provides new insights into how the walls of guard cells are constructed to meet the mechanical requirements of stomatal dynamics.
RESUMO
Guard cells are pairs of epidermal cells that control gas diffusion by regulating the opening and closure of stomatal pores. Guard cells, like other types of plant cells, are surrounded by a three-dimensional, extracellular network of polysaccharide-based wall polymers. In contrast to the walls of diffusely growing cells, guard cell walls have been hypothesized to be uniquely strong and elastic to meet the functional requirements of withstanding high turgor and allowing for reversible stomatal movements. Although the walls of guard cells were long underexplored as compared to extensive studies of stomatal development and guard cell signaling, recent research has provided new genetic, cytological, and physiological data demonstrating that guard cell walls function centrally in stomatal development and dynamics. In this review, we highlight and discuss the latest evidence for how wall polysaccharides are synthesized, deposited, reorganized, modified, and degraded in guard cells, and how these processes influence stomatal form and function. We also raise open questions and provide a perspective on experimental approaches that could be used in the future to shed light on the composition and architecture of guard cell walls.
RESUMO
On-farm manure storage pits contain both toxic and asphyxiating gases such as hydrogen sulfide, carbon dioxide, methane, and ammonia. Farmers and service personnel occasionally need to enter these pits to conduct repair and maintenance tasks. One intervention to reduce the toxic and asphyxiating gas exposure risk to farm workers when entering manure pits is manure pit ventilation. This article describes an online computational fluid dynamics-based design aid for evaluating the effectiveness of manure pit ventilation systems to reduce the concentrations of toxic and asphyxiating gases in the manure pits. This design aid, developed by a team of agricultural engineering and agricultural safety specialists at Pennsylvania State University, represents the culmination of more than a decade of research and technology development effort. The article includes a summary of the research efforts leading to the online design aid development and describes protocols for using the online design aid, including procedures for data input and for accessing design aid results. Design aid results include gas concentration decay and oxygen replenishment curves inside the manure pit and inside the barns above the manure pits, as well as animated motion pictures of individual gas concentration decay and oxygen replenishment in selected horizontal and vertical cut plots in the manure pits and barns. These results allow the user to assess (1) how long one needs to ventilate the pits to remove toxic and asphyxiating gases from the pit and barn, (2) from which portions of the barn and pit these gases are most and least readily evacuated, and (3) whether or not animals and personnel need to be removed from portions of the barn above the manure pit being ventilated.
RESUMO
Cell walls are likely to be essential determinants of the amazing strength and flexibility of the guard cells that surround each stomatal pore in plants, but surprisingly little is known about cell wall composition, organization, and dynamics in guard cells. Recent analyses of cell wall organization and stomatal function in the guard cells of Arabidopsis thaliana mutants with defects in cellulose and xyloglucan have allowed for the development of new hypotheses about the relative contributions of these components to guard cell function. Advanced image analysis methods can allow for the automated detection of key structures, such as microtubules (MTs) and Cellulose Synthesis Complexes (CSCs), in guard cells, to help determine their contributions to stomatal function. A major challenge in the mechanical modeling of dynamic biological structures, such as guard cell walls, is to connect nanoscale features (e.g., wall polymers and their molecular interactions) with cell-scale mechanics; this challenge can be addressed by applying multiscale computational modeling that spans multiple spatial scales and physical attributes for cell walls.
Assuntos
Celulose/metabolismo , Simulação por Computador , Glucanos/metabolismo , Processamento de Imagem Assistida por Computador/métodos , Estômatos de Plantas/citologia , Estômatos de Plantas/fisiologia , Xilanos/metabolismo , Fenômenos Biomecânicos , Parede Celular/metabolismo , Análise de Elementos Finitos , Microtúbulos/metabolismoRESUMO
Cheese is a ready-to-eat food that may be contaminated on the surface by undesirable spoilage and pathogenic microorganisms during production, packaging, and postpackaging processes. Penicillium roqueforti is commonly found on cheese surfaces at refrigeration temperatures and is one of the most common spoilage fungal species. Consumption of cheese contaminated with Listeria monocytogenes can result in foodborne listeriosis. Therefore, cheese should be decontaminated at postprocessing stages. Pulsed UV light is a nonthermal method for food preservation that involves the use of intense short pulses to ensure microbial decontamination on the surface of foods or packaging materials. In this study, the efficacy of pulsed UV light for inactivation of P. roqueforti and L. monocytogenes inoculated onto packaged and unpackaged hard cheeses was investigated. Treatment times and the distance from the UV strobe were evaluated to determine optimum treatment conditions. Packaged and unpackaged cheeses were treated at distances of 5, 8, and 13 cm for up to 60 s. For P. roqueforti, maximum reduction after 40 s at 5 cm was 1.32 log CFU/cm(2) on unpackaged cheese and 1.24 log CFU/cm(2) on packaged cheese. Reductions of L. monocytogenes under the same treatment conditions were about 2.9 and 2.8 log CFU/cm(2) on packaged and unpackaged cheeses, respectively. The temperature changes and total energy increases were directly proportional to treatment time and inversely proportional to distance between the UV lamp and the samples. The changes in color and lipid oxidation were determined at mild (5 s at 13 cm), moderate (30 s at 8 cm), and extreme (40 s at 5 cm) treatments. The color and chemical quality of cheeses were not significantly different after mild treatments (P > 0.05). The mechanical properties of the plastic packaging material (polypropylene) also were evaluated after mild, moderate, and extreme treatments. A decreasing trend was noted for elastic modulus; however, no significant differences were found between untreated samples and those given mild and moderate treatments (P > 0.05). Overall, these results indicate that pulsed UV light can inactivate P. roqueforti and L. monocytogenes on the surface of hard cheeses.
Assuntos
Queijo/microbiologia , Contagem de Colônia Microbiana , Descontaminação/métodos , Microbiologia de Alimentos/métodos , Conservação de Alimentos/métodos , Listeria monocytogenes , Animais , Bovinos , Queijo/efeitos da radiação , Contaminação de Alimentos/prevenção & controle , Penicillium , Controle de Qualidade , Temperatura , Substâncias Reativas com Ácido Tiobarbitúrico/química , Raios UltravioletaRESUMO
Pulsed UV light inactivation of Salmonella Typhimurium on unpackaged and vacuum-packaged chicken breast, Listeria monocytogenes on unpackaged and vacuum-packaged chicken frankfurters, and Salmonella Enteritidis on shell eggs was explained by log-linear and Weibull models using inactivation data from previous studies. This study demonstrated that the survival curves of Salmonella Typhimurium and L. monocytogenes were nonlinear exhibiting concavity. The Weibull model was more successful than the log-linear model in estimating the inactivations for all poultry products evaluated, except for Salmonella Enteritidis on shell eggs, for which the survival curve was sigmoidal rather than concave, and the use of the Weibull model resulted in slightly better fit than the log-linear model. The analyses for the goodness of fit and performance of the Weibull model produced root mean square errors of 0.059 to 0.824, percent root mean square errors of 3.105 to 21.182, determination coefficients of 0.747 to 0.989, slopes of 0.842 to 1.042, bias factor values of 0.505 to 1.309, and accuracy factor values of 1.263 to 6.874. Overall, this study suggests that the survival curves of pathogens on poultry products exposed to pulsed UV light are nonlinear and that the Weibull model may generally be a useful tool to describe the inactivation patterns for pathogenic microorganisms affiliated with poultry products.