Investigation on mild extrusion cooking for development of snacks using rice and chickpea flour blends.

A study was conducted to optimize the mild extrusion cooking conditions for development of rice and chickpea based extrudates. The independent variables i.e. extrusion parameters (Screw speed, barrel temperature), feed moisture and proportions of rice flour and chickpea flour were varied using central composite rotatable design (CCRD), and their effects on system parameter- Specific mechanical energy (SME) and product characteristics i.e., water absorption index (WAI), water solubility index (WSI), bulk density (BD), expansion ratio (ER), breaking strength (BS), colour values (L*, a* and b*) and overall acceptability (OA) were studied. All the system and product responses were significantly affected by independent variables. Response surface and regression models were established to determine the responses as function of process variables. Models obtained were highly significant with high coefficient of determination (R2 ≥ 0.889). The optimum mild extrusion conditions obtained by numerical optimization for development of snacks were 102 °C barrel temperature, 281 rpm screw speed, 18.3% feed moisture and rice to chickpea flour ratio as 90:10. Storage studies confirmed that the developed snacks can be stored better in laminated pouches than in high density polyethylene (HDPE) bags for a period of 6 months under ambient conditions.

Effect of 1-MCP and KMnO4 treatments with different packaging on quality preservation of golden delicious apples.

This study explored the impact of three packaging materials (wooden boxes, corrugated fiber boxes, shrink-wrapped boxes) combined with two ethylene scrubbers (1-MCP, KMnO4) on the shelf life of Golden Delicious apples. While previous research has extensively studied the effects of packaging and ethylene inhibitors independently, the novelty of this work lies in its combined evaluation of these factors under ambient storage conditions over an extended period of 160 days. The study specifically addresses a research gap by directly comparing the efficacy of 1-MCP and KMnO4 within different packaging environments, offering insights into their combined influence on key quality parameters such as firmness, juice yield, rot incidence, physiological loss in weight (PLW), acidity, and total soluble solids (TSS). Findings revealed that 1-MCP-treated apples, particularly when shrink-wrapped, experienced minimal reductions in firmness and juice yield, with significantly lower rot incidence and physiological loss in weight (PLW) compared to KMnO4-treated and control apples. Additionally, while acidity and juice content naturally declined over time, and TSS initially increased before decreasing, 1-MCP-treated apples exhibited more stable quality attributes. The study also noted a slower decline in organoleptic quality with 1-MCP and shrink-wrap packaging. The research concludes that the combination of 1-MCP treatment and shrink-wrap packaging most effectively extends the shelf life of Golden Delicious apples, highlighting the importance of integrated approaches to post-harvest management. This study provides a novel framework for improving storage techniques, particularly for ambient conditions where shelf life extension is most challenging.

Bioinformatics approaches and big data analytics opportunities in improving fisheries and aquaculture.

Aquaculture has witnessed an excellent growth rate during the last two decades and offers huge potential to provide nutritional as well as livelihood security. Genomic research has contributed significantly toward the development of beneficial technologies for aquaculture. The existing high throughput technologies like next-generation technologies generate oceanic data which requires extensive analysis using appropriate tools. Bioinformatics is a rapidly evolving science that involves integrating gene based information and computational technology to produce new knowledge for the benefit of aquaculture. Bioinformatics provides new opportunities as well as challenges for information and data processing in new generation aquaculture. Rapid technical advancements have opened up a world of possibilities for using current genomics to improve aquaculture performance. Understanding the genes that govern economically relevant characteristics, necessitates a significant amount of additional research. The various dimensions of data sources includes next-generation DNA sequencing, protein sequencing, RNA sequencing gene expression profiles, metabolic pathways, molecular markers, and so on. Appropriate bioinformatics tools are developed to mine the biologically relevant and commercially useful results. The purpose of this scoping review is to present various arms of diverse bioinformatics tools with special emphasis on practical translation to the aquaculture industry.

Impact of spray drying conditions on the reconstitution, efficiency and flow properties of spray dried apple powder-optimization, sensorial and rheological assessment.

Spray drying is a preferred choice for development of highly soluble, rapidly dispersible apple powder. However, adhesion during spray drying of syrups and juices is encountered which leads to product loss. The main solution to reduce adhesion is using drying aids. Besides, control of spray drying operating parameters (inlet air temperature and feed flow rate) also closely govern the powder yield, physical, functional and microstructural properties of spray dried fruit powder. Thus, the aim of the study was to evaluate the effect of inlet air temperature (IAT), carrier agent concentration (MD:GA), feed flow rate (FFR) & feed TSS (FTSS) on moisture content, hygroscopicity, dispersibility, water solubility index (WSI), bulk density (BD), porosity (Φ), flowability, lightness (L*) and radical scavenging activity (RSA). Design expert predicted IAT of 160 °C, MD and GA concentration of 14% and 6% respectively, FFR of 350 rpm & FTSS of 15oBrix as optimum condition for development of easily dispersible, highly soluble and least hygroscopic powder. The powder developed after following the optimized condition (SDAP) recorded moisture content as 2.91%, hygroscopicity as 25.29%, dispersibility as 92.50%, WSI as 94.17%, bulk density as 314.1 kg/m3, porosity as 57.19, flowability as 25.83°, L* value as 70.54 and RSA as 14.37. Among different powder reconstitution concentrations, 25% w/v concentration came out to be the best for reconstitution on the basis of sensory evaluation and rheological test. Frequency sweep test for all the reconstituted juice samples showed higher storage modulus than loss modulus for all the applied frequencies. The results of the study conferred that the developed powder could be used for commercial purpose.

Biogenic silver nanoparticles: Synthesis, applications and challenges in food sector with special emphasis on aquaculture.

Aquaculture, a rapidly expanding global food sector faces challenges like pathogenic infections, water quality management and sustainability. Silver nanoparticles (AgNPs) have emerged as promising tools in aquaculture due to their antimicrobial, antiviral and antifungal properties. AgNPs offer alternatives to traditional antimicrobial agents. Their small size and unique physicochemical properties enhance antimicrobial activity, effectively inhibiting pathogen growth and reducing disease incidence in aquatic organisms. Additionally, AgNPs can improve water quality by catalyzing the removal of pollutants, heavy metals and nutrients, reducing environmental impacts. Despite their potential benefits, several challenges and knowledge gaps exist in the utilization of AgNPs in aquaculture. Addressing challenges related to regulation, sustainability and environmental impact will be crucial for realizing their full potential in the industry. Therefore, the present review aims to provide insight into the role of AgNPs, its challenges in aquaculture and also highlights key areas for future research.

Development of low glycemic index instant Phirni (pudding) mix-its visco-thermal, morphological and rheological characterization.

High amylose rice (HAR) and carboxymethyl cellulose (CMC) are the preferred choices for enhancement of resistant starch content and lowering of glycemic index in dairy desserts. The effects of different levels of skimmed milk powder (SMP): HAR flour (45:55 to 75:25) and CMC (0.1 to 1%) were investigated on physical characteristics of dry-mix and on texture profile parameters, resistant starch (RS), predicted glycemic index (pGI), glycemic load (GL) and overall acceptability of phirni (a traditional milk pudding). Design expert predicted SMP (70): HAR (30) and CMC (0.8%) as optimum levels for reducing the pGI and maximizing the RS content and other quality characteristics in phirni. RS content of phirni (4.38%) prepared from optimized dry-mix (ODM) was higher while pGI (48.12) and GL (7.50) were lower as compared to phirni prepared from market dry-mix (MDM). The visco-thermal properties of ODM and MDM also showed significant variations. Storage modulus (G') and loss modulus (G'') indicated that ODM phirni was less solid than MDM phirni. Scanning electron micrographs showed fused structures in ODM, while coarse sheet like structures were observed across the surface of MDM. Thus, ODM can be a promising substitute for the available milk desserts for diabetic patients.