RESUMO
Invisibility, a fascinating ability of hiding objects within environments, has attracted broad interest for a long time. However, current invisibility technologies are still restricted to stationary environments and narrow band. Here, we experimentally demonstrate a Chimera metasurface for multiterrain invisibility by synthesizing the natural camouflage traits of various poikilotherms. The metasurface achieves chameleon-like broadband in situ tunable microwave reflection mimicry of realistic water surface, shoal, beach/desert, grassland, and frozen ground from 8 to 12 GHz freely via the circuit-topology-transited mode evolution, while remaining optically transparent as an invisible glass frog. Additionally, the mechanic-driven Chimera metasurface without active electrothermal effect, owning a bearded dragon-like thermal acclimation, can decrease the maximum thermal imaging difference to 3.1 °C in tested realistic terrains, which cannot be recognized by human eyes. Our work transitions camouflage technologies from the constrained scenario to ever-changing terrains and constitutes a big advance toward the new-generation reconfigurable electromagnetics with circuit-topology dynamics.
RESUMO
Graph learning models have received increasing attention in the computational analysis of single-cell RNA sequencing (scRNA-seq) data. Compared with conventional deep neural networks, graph neural networks and language models have exhibited superior performance by extracting graph-structured data from raw gene count matrices. Established deep neural network-based clustering approaches generally focus on temporal expression patterns while ignoring inherent interactions at gene-level as well as cell-level, which could be regarded as spatial dynamics in single-cell data. Both gene-gene and cell-cell interactions are able to boost the performance of cell type detection, under the framework of multi-view modeling. In this study, spatiotemporal embedding and cell graphs are extracted to capture spatial dynamics at the molecular level. In order to enhance the accuracy of cell type detection, this study proposes the scHybridBERT architecture to conduct multi-view modeling of scRNA-seq data using extracted spatiotemporal patterns. In this scHybridBERT method, graph learning models are employed to deal with cell graphs and the Performer model employs spatiotemporal embeddings. Experimental outcomes about benchmark scRNA-seq datasets indicate that the proposed scHybridBERT method is able to enhance the accuracy of single-cell clustering tasks by integrating spatiotemporal embeddings and cell graphs.
Assuntos
Benchmarking , Regulação da Expressão Gênica , Comunicação Celular , Análise por Conglomerados , AprendizagemRESUMO
In this study, a three-dimensional (3D) laser micromachining system with an integrated sub-100â nm resolution in-situ measurement system was proposed. The system used the same femtosecond laser source for in-situ measurement and machining, avoiding errors between the measurement and the machining positions. It could measure the profile of surfaces with an inclination angle of less than 10°, and the measurement resolution was greater than 100â nm. Consequently, the precise and stable movement of the laser focus could be controlled, enabling highly stable 3D micromachining. The results showed that needed patterns could be machined on continuous surfaces using the proposed system. The proposed machining system is of great significance for broadening the application scenarios of laser machining.
RESUMO
Lithium niobate (LN) crystal plays important roles in future integrated photonics, but it is still a great challenge to efficiently fabricate three-dimensional micro-/nanostructures on it. Here, a femtosecond laser direct writing-assisted liquid back-etching technology (FsLDW-LBE) is proposed to achieve the three-dimensional (3D) microfabrication of lithium niobate (LN) with high surface quality (Ra = 0.422â nm). Various 3D structures, such as snowflakes, graphic arrays, criss-cross arrays, and helix arrays, have been successfully fabricated on the surface of LN crystals. As an example, a microcone array was fabricated on LN crystals, which showed a strong second harmonic signal enhancement with up to 12 times bigger than the flat lithium niobate. The results indicate that the method provides a new approach for the microfabrication of lithium niobate crystals for nonlinear optics.
RESUMO
In this Letter, a method for the fabrication of bifocal lenses is presented by combining surface ablation and bulk modification in a single laser exposure followed by the wet etching processing step. The intensity of a single femtosecond laser pulse was modulated axially into two foci with a designed computer-generated hologram (CGH). Such pulse simultaneously induced an ablation region on the surface and a modified volume inside the fused silica. After etching in hydrofluoric acid (HF), the two exposed regions evolved into a bifocal lens. The area ratio (diameter) of the two lenses can be flexibly adjusted via control of the pulse energy distribution through the CGH. Besides, bifocal lenses with a center offset as well as convex lenses were obtained by a replication technique. This method simplifies the fabrication of micro-optical elements and opens a highly efficient and simple pathway for complex optical surfaces and integrated imaging systems.
RESUMO
Non-Abelian holonomy, a noncommutative process that measures the parallel transport of non-Abelian gauge fields, has so far been realized in degenerate Hermitian systems with degenerate eigenstates or nondegenerate non-Hermitian systems with exceptional points. Here, we introduce non-Abelian holonomy into degenerate non-Hermitian systems possessing degenerate exceptional points and degenerate energy topologies. The interplay between energy degeneracy and energy topology around exceptional points leads to a non-Abelian holonomy with multiple energy levels and multiple degenerate levels simultaneously, going beyond that in degenerate Hermitian systems with a single energy level, or in nondegenerate non-Hermitian systems with a single degenerate level. We exploit an on-chip photonic platform to experimentally demonstrate the holonomy induced non-Abelian phenomenon, including the switching of eigenstates associated with different degenerate exceptional points and sequence-dependent holonomic outcomes. Our work shifts the paradigm of non-Abelian holonomy and adds new degrees of freedom for non-Abelian applications.
RESUMO
Femtosecond lasers enable flexible and thermal-damage-free ablation of solid materials and are expected to play a critical role in high-precision cutting, drilling, and shaping of electronic chips, display panels, and industrial parts. Although the potential applications are theoretically predicted, true 3D nano-sculpturing of solids such as glasses and crystals, has not yet been demonstrated, owing to the technical challenge of negative cumulative effects of surface changes and debris accumulation on the delivery of laser pulses and subsequent material removal during direct-write ablation. Here, a femtosecond laser-induced cavitation-assisted true 3D nano-sculpturing technique based on the ingenious combination of cavitation dynamics and backside ablation is proposed to achieve stable clear-field point-by-point material removal in real time for precise 3D subtractive fabrication on various difficult-to-process materials. As a result, 3D devices including free-form silica lenses, micro-statue with vivid facial features, and rotatable sapphire micro-mechanical turbine, all with surface roughness less than 10 nm are readily produced. The true 3D processing capability can immediately enable novel structural and functional micro-nano optics and non-silicon micro-electro-mechanical systems based on various hard solids.
RESUMO
Femtosecond laser-induced deep-subwavelength structures have attracted much attention as a nanoscale surface texturization technique. A better understanding of the formation conditions and period control is required. Herein, we report a method of non-reciprocal writing via a tailored optical far-field exposure, where the period of ripples varies along different scanning directions, and achieve a continuous manipulation of the period from 47 to 112 nm (±4 nm) for a 100-nm-thick indium tin oxide (ITO) on glass. A full electromagnetic model was developed to demonstrate the redistributed localized near-field at different stages of ablation with nanoscale precision. It explains the formation of ripples and the asymmetry of the focal spot determines the non-reciprocity of ripple writing. Combined with beam shaping techniques, we achieved non-reciprocal writing (regarding scanning direction) using an aperture-shaped beam. The non-reciprocal writing is expected to open new paths for precise and controllable nanoscale surface texturing.
RESUMO
Topological edge states are a generic feature of topological insulators, and the long-range interactions, which break certain properties of topological edge states, are always non-negligible in real physical systems. In this Letter, we investigate the influence of next-nearest-neighbor (NNN) interactions on the topological properties of the Su-Schrieffer-Heeger (SSH) model by extracting the survival probabilities at the boundary of the photonic lattices. By introducing a series of integrated photonic waveguide arrays with different strengths of long-range interactions, we experimentally observe delocalization transition of light in SSH lattices with nontrivial phase, which is in good agreement with our theoretical predictions. The results indicate that the NNN interactions can significantly affect the edge states, and that the localization of these states can be absent in topologically nontrivial phase. Our work provides an alternative way to investigate the interplay between long-range interactions and localized states, which may stimulate further interest in topological properties in relevant structures.
Assuntos
Fótons , Análise por ConglomeradosRESUMO
Optical waveguides prepared by femtosecond laser direct writing have birefringent properties, which can affect polarization encoding and entanglement on chips. Here, we first propose a shape-stress dual compensation fabrication scheme to decrease birefringence. Ultralow birefringent waveguides (1 × 10-9) were obtained by controlling the cross sectional shape of the main waveguide and adjusting the position of the auxiliary lines. In addition, we prepared polarization-independent directional coupler and demonstrated the evolution of polarization-independent waveguide array with different polarized light. In the future, ultralow birefringent waveguides will be widely applied in polarization encoding and entangled quantum photonic integrated circuits.
RESUMO
The implementation of transverse mode, polarization, frequency, and other degrees of freedom (d.o.f.s) of photons is an important way to improve the capability of photonic circuits. Here, a three-dimensional (3D) linear polarized (LP) LP11 mode converter was designed and fabricated using a femtosecond laser direct writing (FsLDW) technique. The converter included multi-mode waveguides, symmetric Y splitters, and phase delaying waveguides, which were constructed as different numbers and arrangements of circular cross section waveguides. Finally, the modes (LP11a and LP11b) were generated on-chip with a relatively low insertion loss (IL). The mode converter lays a foundation for on-chip high-order mode generation and conversion between different modes, and will play a significant role in mode coding and decoding of 3D photonic circuits.
RESUMO
A novel high-sensitivity temperature sensor based on a chirped thin-core fiber Bragg grating Fabry-Perot interferometer (CTFBG-FPI) and the Vernier effect is proposed and demonstrated. With femtosecond laser direct writing technology, two CTFBG-FPIs with different interferometric cavity lengths are inscribed inside a thin-core fiber to form a Vernier effect system. The two FPIs consist of two pairs of CTFBGs with a full width at half maximum (FWHM) of 66.5â nm staggered in parallel. The interferometric cavity lengths of the two FPIs were designed to be 2 mm and 1.98 mm as the reference arm and sensing arm of the sensor, respectively. The temperature sensitivity of this sensor was measured to be -1.084â nm/°C in a range of 40-90°C. This sensor is expected to play a crucial role in precision temperature measurement applications.
RESUMO
The formation mechanism of laser-induced periodic surface structures (LIPSS) has been a key to high-resolution sub-diffraction lithography or high-efficiency large-area nanotexturing. We show the evolution of LIPSS formation from a nanohole seed structure to high-spatial-frequency LIPSS by using a tightly focused and rectangular-shaped laser beam with different shape-polarization orientations. Formation of LIPSS based on light intensity distribution without invoking any long-range electromagnetic modes achieved quantitative match between modeling and experiment. Our results clearly show the entire step-like and deterministic process of LIPSS evolution based on experimental data and numerical simulations, revealing the dominant structural near-field enhancement on the ripple formation. A rectangular-shaped beam with an aspect ratio of 7:3 was used to break the symmetry of a circularly shaped focus. By azimuthally rotating the orientation of the focal spot and the polarization, it is possible to visualize the far-field effect for the initial seed structure formation and the competition between the far and near fields in the subsequent structure evolution.
RESUMO
Rotated optical axis waveguides can facilitate on-chip arbitrary wave-plate operations, which are crucial tools for developing integrated universal quantum computing algorithms. In this paper, we propose a unique technique based on femtosecond laser direct writing technology to fabricate arbitrarily rotated optical axis waveguides. First, a circular isotropic main waveguide with a non-optical axis was fabricated using a beam shaping method. Thereafter, a trimming line was used to create an artificial stress field near the main waveguide to induce a rotated optical axis. Using this technique, we fabricated high-performance half- and quarter-wave plates. Subsequently, high-fidelity (97.1%) Pauli-X gate operation was demonstrated via quantum process tomography, which constitutes the basis for the full manipulation of on-chip polarization-encoded qubits. In the future, this work is expected to lead to new prospects for polarization-encoded information in photonic integrated circuits.
RESUMO
Photonic topological states, providing light-manipulation approaches in robust manners, have attracted intense attention. Connecting photonic topological states with far-field degrees of freedom (d.o.f.) has given rise to fruitful phenomena. Recently emerged higher-order topological insulators (HOTIs), hosting boundary states two or more dimensions lower than those of bulk, offer new paradigms to localize or transport light topologically in extended dimensionalities. However, photonic HOTIs have not been related to d.o.f. of radiation fields yet. Here, we report the observation of polarization-orthogonal second-order topological corner states at different frequencies on a designer-plasmonic kagome metasurface in the far field. Such phenomenon stands on two mechanisms, i.e., projecting the far-field polarizations to the intrinsic parity d.o.f. of lattice modes and the parity splitting of the plasmonic corner states in spectra. We theoretically and numerically show that the parity splitting originates from the underlying interorbital coupling. Both near-field and far-field experiments verify the polarization-orthogonal nondegenerate second-order topological corner states. These results promise applications in robust optical single photon emitters and multiplexed photonic devices.
Assuntos
Frutas , Fótons , Feminino , Gravidez , HumanosRESUMO
To solve the problem of static magnetic field detection accuracy and consistency, we prepared an array of single NV centers for static magnetic field vector and gradient detection using the femtosecond laser direct writing method. The prepared single NV centers are characterized by fewer impurity defects and good stress uniformity, with an average spatial positioning error of only 0.2 µm. This array of single NV centers can achieve high accuracy magnetic field vector and gradient measurement with GBZ≈-0.047 µT/µm in the Z-axis. This result provides a new idea for large-range, high-precision magnetic field vector and gradient measurements.
RESUMO
In this study, a hybrid method for high-quality rapid drilling of transparent hard materials which combines femtosecond laser (fs-laser) Bessel beam modifying materials and selective wet etching is presented. Using this method, micro-holes with no taper of different sizes (from 10 to 35 µm) and shapes (square, triangle, circular, and pentagram) are fabricated. Bessel beams of different lengths can be generated flexibly by loading different computer-generated holograms (CGHs) into the spatial light modulator (SLM) and the maximum length of light interacting with materials can reach 320 µm, leading to a reduction of the laser scanning time by two orders of magnitude. Moreover, a set of three-dimensional multi-layer submicron through-holes in crystal materials is also realized, with an aspect ratio of more than 1000 for each hole. These results indicate that this method has broad application potential in chip packaging, aviation manufacturing, single particle catalysis, and other fields.
RESUMO
Accurate photon phase control on a chip is essential to improve the expandability and stability of photonic integrated circuits (PICs). Here, we propose a novel, to the best of our knowledge, on-chip static phase control method in which a modified line is added close to the normal waveguide with a lower-energy laser. By controlling the laser energy and the position and length of the modified line, the optical phase can be precisely controlled with low loss and a three-dimensional (3D) path. Customizable phase modulation ranging from 0 to 2π is performed with a precision of λ/70 in a Mach-Zehnder interferometer. The proposed method can customize high-precision control phases without changing the waveguide's original spatial path, which is expected to control the phase and solve the phase error correction problem during processing of large-scale 3D-path PICs.
RESUMO
Edge states in topological phase transitions have been observed in various platforms. To date, verification of the edge states and the associated topological invariant are mostly studied, and yet a quantitative measurement of topological phase transitions is still lacking. Here, we show the direct measurement of edge states and their localization lengths from survival probability. We employ photonic waveguide arrays to demonstrate the topological phase transitions based on the Su-Schrieffer-Heeger model. By measuring the survival probability at the lattice boundary, we show that in the long-time limit, the survival probability is P=(1-e^{-2/ξ_{loc}})^{2}, where ξ_{loc} is the localization length. This length derived from the survival probability is compared with the distance from the transition point, yielding a critical exponent of ν=0.94±0.04 at the phase boundary. Our experiment provides an alternative route to characterizing topological phase transitions and extracting their key physical quantities.
Assuntos
Probabilidade , Transição de FaseRESUMO
Remote manipulation of a micromachine under an external magnetic field is significant in a variety of applications. However, magnetic manipulation requires that either the target objects or the fluids should be ferromagnetic or superparamagnetic. To extend the applicability, we propose a versatile optical printing technique termed femtosecond laser-directed bubble microprinting (FsLDBM) for on-demand magnetic encoding. Harnessing Marangoni convection, evaporation flow, and capillary force for long-distance delivery, near-field attraction, and printing, respectively, FsLDBM is capable of printing nanomaterials on the solid-state substrate made of arbitrary materials. As a proof-of-concept, we actuate a 3D polymer microturbine under a rotating magnetic field by implementing γ-Fe2O3 nanomagnets on its blade. Moreover, we demonstrate the magnetic encoding on a living daphnia and versatile manipulation of the hybrid daphnia. With its general applicability, the FsLDBM approach provides opportunities for magnetic control of general microstructures in a variety of applications, such as smart microbots and biological microsurgery.