RESUMO
Tb3+ is extensively employed in magneto-optical devices and luminescent materials owing to its distinctive physical properties. However, under certain conditions, trivalent Tb3+ readily undergoes oxidation to tetravalent Tb4+, significantly reducing the performance of devices containing Tb3+. In this Letter, we report a technique called dual-annealing (DA) post-treatment, which effectively solves Tb oxidation issues by utilizing the reducibility of the vacuum environment. High-quality Tb:Y2O3 transparent ceramics were prepared with in-line transmittance of â¼80% at 800â nm. Subsequently, the prepared ceramics were subjected to DA treatment. The optical, photoluminescence, radioluminescence, and x-ray imaging properties of DA samples were comprehensively compared with those of conventionally single-annealed (SA) samples. The coloration of Tb:Y2O3 transparent ceramics due to Tb4+ absorption was eliminated by DA. Notably, the DA sample showed a 3.28-fold increase in photoluminescence intensity and a 2.73-fold increase in radioluminescence intensity compared with the traditional SA sample. DA post-treatment enables Tb: Y2O3 transparent ceramics to achieve x-ray imaging capabilities. This Letter presents a simple, efficient, and universally applicable post-treatment technique expected to replace conventional hydrogen annealing in numerous scenarios.
RESUMO
Narrowband green-emission, combined with superior physicochemical stability and thermal performance, is regarded as a common pursuit in backlight display applications. However, mainstream phosphor-converted materials composed of resin or silicone resin easily encounter the dilemma of thermal decomposition and chemical corrosion for practical use. To overcome this problem, in this work, Mn2+/Mg2+ co-doped AlON ceramic is successfully realized with ultra-narrowband green-emission and high transparency. The luminescent property of AlON: Mn2+-Mg2+ ceramic exhibits narrowband green emission centered at 509â nm with a full width at half maximum of 36â nm, which is smaller than the corresponding powder counterpart (44â nm). Moreover, AlON: Mn2+-Mg2+ ceramic presents a wide color gamut (103.6%) and high color purity (74%). Concurrently, high transmittance of this ceramic, at 82%, unveils a potential innovation in the display technology field. This work may facilitate the development of narrowband green light-emitting converters based on AlON: Mn2+-Mg2+ transparent ceramics in large color gamut backlight display applications.
RESUMO
Achieving single-band upconversion (UC) is a challenging but rewarding approach to attain optimal performance in diverse applications. In this paper, we successfully achieved single-band red UC luminescence in Yb2O3: Er transparent ceramics (TCs) through the utilization of a sensitizer-rich design. The Yb2O3 host, which has a maximum host lattice occupancy by Yb3+ sensitizers, facilitates the utilization of excitation light and enhances energy transfer to activators, resulting in improved UC luminescence. Specifically, by shortening the ionic spacing between sensitizer and activator, the energy back transfer and the cross-relaxation process are promoted, resulting in weakening of green energy level 4S3/2 and 2H11/2 emission and enhancement of red energy level 4F9/2 emission. The prepared Yb2O3: Er TCs exhibited superior optical properties with in-line transmittance over 80% at 600â nm. Notably, in the 980nm-excited UC spectrum, green emission does not appear, thus Yb2O3: Er TCs exhibit ultra-pure single band red emission, with CIE coordinates of (0.72, 0.28) and color purity exceeding 99.9%. To the best of our knowledge, this is the first demonstration of pure red UC luminescence in TCs. Furthermore, the luminescent intensity ratio (LIR) technique was utilized to apply this pure red-emitting TCs for temperature sensing. The absolute sensitivity of Yb2O3: Er TCs was calculated to be 0.319% K-1 at 304â K, which is the highest level of optical thermometry based on 4F9/2 levels splitting of Er3+ known so far. The integration between pure red UC luminescence and temperature sensing performance opens up new possibilities for the development of multi-functional smart windows.
RESUMO
As efficient and stable nuclear waste forms, single-phase uranium (U6+)-incorporated La2Zr2O7 nanoparticles were designed and synthesized in an air atmosphere. To obtain a high U loading, divalent magnesium (Mg2+) was introduced to balance the extra charge from the substitution of tetravalent zirconium (Zr4+) by U6+ with a minimized impact to the lattice. There is a composition-driven phase transition from order pyrochlore to defect fluorite as the U concentration increases from 10 to 30 mol %, demonstrating both good solubility and stability of the La2Zr2O7 host for U and potentially for other actinides. La2(UxMgxZr1-2x)2O7 (x = 0-0.3) nanoparticles showed good dispersity and crystallinity with an average particle size of â¼48 nm. Furthermore, X-ray photoelectron spectroscopy, Raman spectroscopy, and emission spectroscopy revealed that U was stabilized in the hexavalent state in the form of a UO22+ ion. Spectroscopic methods also demonstrated that our samples caused a scintillating response with an orange emission (597 nm) by 230 nm excitation. In addition, density functional theory simulations were employed to investigate the atomic structures and electronic properties of the U-incorporated pyrochlores. The calculated bond lengths, atomic charges, and charge density confirm the existence of UO22+ ions. Supported by both experimental and computational results, a novel geometrical structure was proposed to explain the Mg2+-U6+ substitution. This work demonstrated the successful development of U-incorporated La2Zr2O7 nanoparticles and provided an efficient way to immobilize U in these ceramic waste matrixes.
RESUMO
Single-phase nano-crystalline yttria-stabilized zirconia (YSZ) powder was prepared by co-precipitation method using zirconium oxychloride (ZrOCl2 · 8H2O) and yttrium nitrate (Y(NO3)3 · 6H2O) as raw materials and ammonium bicarbonate (NH4HCO3) and liquor ammonia (NH4OH) as the precipitators. In order to get the powder with favorable dispersibility, polyethylene glycol (PEG, HO(CH2CH2O) n H) with different molecular weights and amounts was used as a dispersant agent in the synthesis process and its effects on the YSZ powder was investigated. The scanning electron micrograph (SEM) images showed that the degree of agglomeration and the mean crystal size of YSZ powder varied with the amount and the molecular weight of PEG. The appropriate amount and molecular weight of PEG were given by comparing the dispersibility and crystal size distribution of powders. In the process, one also could find that the promotion of dispersion was insensitive to the molecular weight, and all PEG (4002000) can exert an ability to reduce the agglomeration. The proper amount of PEG400, PEG600, PEG1000, PEG2000 was 3 wt%, 3 wt%, 2 wt%, 2 wt%, respectively. The transmission electric microscope studies in conjunction with the XRD analyzes verified the low degree of agglomeration and the size of YSZ powder varied between 10~20 nm.
RESUMO
Sensitive magnetometer technology is desirable for biomagnetic field detection and geomagnetic field measuring. Signal amplification materials such as magneto-optical crystals or ceramics are crucial for enhancing detection sensitivity, but severe optical scattering and low Verdet constant further limit its application. To develop high-sensitivity magnetometers for quantum weak measurement schemes, we have conducted investigations on the powder calcining dynamics and prepared a series of high-optical-quality (Ho/Dy)2Zr2O7 transparent ceramic samples. The Verdet constant of magneto-optical materials was measured across a continuous wavelength spectrum, exhibiting a peak at 283 ± 5 rad/(T·m). We further established an electron transition mechanism to elucidate the exceptional magneto-optical attributes of dysprosium. In addition, samples demonstrated superior performance in weak-value amplification, reaching a low detectable magnetic field threshold of 3.5 × 10-8 T and continuously worked over 6 h with high stability. Our work developed a highly sensitive magnetometer using optimized magneto-optical ceramics and provided guidance on design, fabrication, and application for magneto-optical ceramics in quantum weak measurement.
RESUMO
Lanthanide-ion-based thermometers have been widely researched and utilized as contactless temperature sensing materials. Cooperating with the unique optical and excellent physical properties of transparent ceramics, Er3+/Yb3+ co-doped Y2Zr2O7 transparent ceramics were successfully fabricated as temperature sensing window materials. Homogeneous distribution of elements inside samples together with high transmittance (nearly 73%) makes it possible as an observing window. Upon excitation at 980 nm, room-temperature luminescent performance was systemically researched for explaining the energy transfer mechanism between Yb3+ and Er3+ ions. The FIR method was introduced for thermally coupled energy levels to realize temperature sensing ability. Detecting sensitivity at different temperatures was also calculated (1.24% K-1 at 303 K), suggesting that Yb3+, Er3+:Y2Zr2O7 are adequate for high sensitivity temperature detecting application. It is also investigated that the concentration of Yb3+ ions not only affects the emission color at room-temperature but also has influence on the sensitivity of temperature and 10 mol % Yb3+, 2 mol % Er3+:Y2Zr2O7 was found to be the most sensitive one. A demonstration experiment was also carried out to validate its application as a smart temperature sensing window. These results suggested that Yb3+, Er3+:Y2Zr2O7 transparent ceramics can have potential for temperature monitoring applications, especially as novel window materials under extreme circumstances.
RESUMO
In the most promising new window materials, the light-blocking property of the state-of-the-art transparent polycrystalline ceramics is still located in the UV range, which undoubtedly limits their applications. Herein, a transparent Y2Zr2O7:Tb (YZO:Tb) ceramic for light-shielding windows was prepared by a solid-state reaction and vacuum sintering method. Two simple and efficient routes, with doping concentrations varying and air-annealing temperatures regulating, were developed for the first time to control the content of defect clusters [TbY4+-O2--TbY4+] and [TbY4+-eâ¢], enabling the optical cutoff waveband of these ceramics spanning from UV and BV to green light. These defect clusters generated from an air-annealing process were proposed for the relevant reaction mechanisms concerning light erasure behavior. The controllably tailoring of optical cutoff wavelength from Tb single-doped YZO ceramics, adjusted by defect clusters, may open a novel door to develop lanthanide-doped transparent ceramics for wide-range tunable light-shielding windows.
RESUMO
Defining the energetic landscape of pseudocapacitive materials such as transition metal layered double hydroxides (LDHs) upon redox-site enrichment is essential to harnessing their power for effective energy storage. Here, coupling acid solution calorimetry, in situ XRD, and in situ DRIFTS, we demonstrate that as the Ni/Al ratio increases, both as-made (hydrated) and dehydrated NiAl-LDH samples are less stable as evidenced by their enthalpies of formation. Moreover, the higher specific capacity at an intermediate Ni/Al ratio of 3 is enabled by effective water-LDH interactions, which energetically stabilize the excessive near-surface Ni redox sites, solvate intercalated carbonate ions, and fill the expanded vdW gap, paying for the "energetic cost" of being "redox-site-rich". Thus, from a thermodynamic perspective, engineering molecule/solid-LDH interactions on the nanoscale with confined guest species other than water, which energetically impose stronger stabilization, may help us to achieve their specific capacitance potential.
RESUMO
We investigate the ionization and displacement effects of an electron-beam (e-beam) on amorphous Gd2Zr2O7 synthesized by the co-precipitation and calcination methods. The as-received amorphous specimens were irradiated under electron beams at different energies (80 keV, 120 keV, and 2 MeV) and then characterized by X-ray diffraction and transmission electron microscopy. A metastable fluorite phase was observed in nanocrystalline Gd2Zr2O7 and is proposed to arise from the relatively lower surface and interface energy compared with the pyrochlore phase. Fast crystallization could be induced by 120 keV e-beam irradiation (beam current = 0.47 mA/cm2). The crystallization occurred on the nanoscale upon ionization irradiation at 400 °C after a dose of less than 1017 electrons/cm2. Under e-beam irradiation, the activation energy for the grain growth process was approximately 10 kJ/mol, but the activation energy was 135 kJ/mol by calcination in a furnace. The thermally activated ionization process was considered the fast crystallization mechanism.
RESUMO
Nanoindentation tests were performed on nanostructured transparent magnesium aluminate (MgAl2O4) ceramics to determine their mechanical properties. These tests were carried out on samples at different applied loads ranging from 300 to 9,000 µN. The elastic recovery for nanostructured transparent MgAl2O4 ceramics at different applied loads was derived from the force-depth data. The results reveal a remarkable enhancement in plastic deformation as the applied load increases from 300 to 9,000 µN. After the nanoindetation tests, scanning probe microscope images show no cracking in nanostructured transparent MgAl2O4 ceramics, which confirms the absence of any cracks and fractures around the indentation. Interestingly, the flow of the material along the edges of indent impressions is clearly presented, which is attributed to the dislocation introduced. High-resolution transmission electron microscopy observation indicates the presence of dislocations along the grain boundary, suggesting that the generation and interaction of dislocations play an important role in the plastic deformation of nanostructured transparent ceramics. Finally, the experimentally measured hardness and Young's modulus, as derived from the load-displacement data, are as high as 31.7 and 314 GPa, respectively.
RESUMO
We report here experimental results of yield strength and stress relaxation measurements of transparent MgAl2O4 nano-ceramics at high pressure and temperature. During compression at ambient temperature, the differential strain deduced from peak broadening increased significantly with pressure up to 2 GPa, with no clear indication of strain saturation. However, by then, warming the sample above 400°C under 4 GPa, stress relaxation was obviously observed, and all subsequent plastic deformation cycles are characterized again by peak broadening. Our results reveal a remarkable reduction in yield strength as the sintering temperature increases from 400 to 900°C. The low temperature for the onset of stress relaxation has attracted attention regarding the performance of transparent MgAl2O4 nano-ceramics as an engineering material.