RESUMO
The production of succinic acid from corn stover is a promising and sustainable route; however, during the pretreatment stage, byproducts such as organic acids, furan-based compounds, and phenolic compounds generated from corn stover inhibit the microbial fermentation process. Selecting strains that are resistant to stress and utilizing nondetoxified corn stover hydrolysate as a feedstock for succinic acid production could be effective. In this study, A. succinogenes CICC11014 was selected as the original strain, and the stress-resistant strain A. succinogenes M4 was obtained by atmospheric and room temperature plasma (ARTP) mutagenesis and further screening. Compared to the original strain, A. succinogenes M4 exhibited a twofold increase in stress resistance and a 113% increase in succinic acid production when hydrolysate was used as the substrate. By conducting whole-genome resequencing of A. succinogenes M4 and comparing it with the original strain, four nonsynonymous gene mutations and two upstream regions with base losses were identified. KEY POINTS: ⢠A high-stress-resistant strain A. succinogenes M4 was obtained by ARTP mutation ⢠The production of succinic acid increased by 113% ⢠The mutated genes of A. succinogenes M4 were detected and analyzed.
Assuntos
Actinobacillus , Zea mays , Zea mays/química , Ácido Succínico , Melhoramento Vegetal , Fermentação , MutaçãoRESUMO
The toluene poses a serious threat to the atmospheric environment and human health. Herein, the reduced graphene oxide (rGO)/TiO2 immobilized on the activated carbon fiber (ACF) are fabricated by ultrasonic assisted sol-gel impregnation method to photodegrade dynamic toluene. Characterizations of rGO/TiO2/ACF composites reveal that the majority of graphene oxide (GO) is reduced to rGO and rGO/TiO2 is evenly loaded onto the ACF surface in the form of a smooth film. Furthermore, the photoelectrochemical experiments demonstrate both rGO and ACF can enhance significantly the separation efficiency of electron-hole pairs. The maximum removal efficiency of rGO/TiO2/ACF-0.75% can be up to 85% under ultraviolet irradiation. The rGO/TiO2/ACF exhibits more excellent adsorption and photodegradation activity for dynamic toluene than both rGO/TiO2 and ACF due to the synergetic effect rather than a simple linear combination of the rGO/TiO2 and ACF for toluene conversion. The possible photodegradation pathway is proposed according to intermediates measured by GC-MS, and adsorption coupling photocatalytic mechanisms are discussed.
Assuntos
Fibra de Carbono , Carvão Vegetal , Adsorção , Catálise , Gases , Grafite , Humanos , Óxidos , Fotólise , Titânio , ToluenoRESUMO
Metal organic frameworks (MOFs) are excellent adsorbents that provide abundant specific surface area, adjustable pore structure, and rich active sites. The purpose of this study was to prepare composites with hydrophobic and high microporous specific surface area and to adsorb toluene gas in moist ambience. An ethanol activation-assisted hydrothermal method was proposed to synthesize copper-benzene-1,3,5-tricarboxylic acid (Cu-BTC) metal-organic framework, Cu-BTC, and ZSM-5 molecular sieve composites (Cu-BTC@ZSM-5). The dynamic adsorption process of toluene on different adsorbents was investigated, and the results showed that the toluene adsorption capacity of Cu-BTC@ZSM-5 (158.6 mg/g) was 2.53 times higher than Cu-BTC (62.7 mg/g), when the ZSM-5 content is 5% and the humidity is 30%RH. Compared with other factors, the humidity inhibited the adsorption of toluene on Cu-BTC@ZSM-5. Langmuir model and the pseudo-second kinetics model can better describe the adsorption behavior of Cu-BTC@ZSM-5. The thermodynamic results showed the adsorption process was a spontaneous exothermic process at low temperature and mainly physical adsorption. The relative regenerability can still up to 80.4% after six cycles. The adsorption mechanisms of Cu-BTC@ZSM-5 were pore-filling adsorption, π-π interaction, cation-π bonding, and hydrophobic interactions. This study will help to design a systematic route to evaluate the adsorption performance of Cu-BTC@ZSM-5 for toluene.