End-To-End FRET Enabling Direct Measurement of Oligomer Chain Conformations and Molecular Weight in Reaction Solutions.

Förster resonance energy transfer (FRET) is an established tool for measuring distances between two molecules (donor and acceptor) on the nanometer scale. In the field of polymer science, the use of FRET to measure polymer end-to-end distances (Ree) often requires complex synthetic steps to label the chain ends with the FRET pair. This work reports an anthracene-functionalized chain-transfer agent for reversible addition-fragmentation chain-transfer (RAFT) polymerization, enabling the synthesized chains to be directly end-labeled with a donor and acceptor without the need for any post-polymerization functionalization. Noteworthily, this FRET method allows for chain conformation measurements of low molecular weight oligomers in situ, without any work-up steps. Using FRET to directly measure the average Ree of the oligomer chains during polymerization, the chain growth of methyl methacrylate, styrene, and methyl acrylate is investigated as a function of reaction time, including determining their degree of polymerization (DP). It is found that DP results from FRET are consistent with other established measurement methods, such as nuclear magnetic resonance (NMR) spectroscopy. Altogether, this work presents a broadly applicable and straightforward method to in situ characterize Ree of low molecular weight oligomers and their DP during reaction.

HBx induced upregulation of FATP2 promotes the development of hepatic lipid accumulation.

The hepatitis B Virus X (HBx) protein plays a crucial role in the HBV-induced hepatic steatosis. Fatty acid transport protein 2 (FATP2) is a key protein that is involved in hepatic lipogenesis, and it was found to be highly expressed in various metabolic diseases. However, Whether FATP2 is a key factor in the pathogenesis of HBx-induced hepatic steatosis remains unclear. In this study, we found that FATP2 was up-regulated by HBx in vitro and in vivo and participated in HBx-induced hepatic lipid accumulation. Treatment of HBx-expressing cell lines and mice with FATP2 inhibitor (FATP2i) lipofermata ameliorated HBx-induced lipid accumulation and reduced oxidative stress and inflammation caused by lipid accumulation. Moreover, the liver injury of mouse was restored after FATP2i treatment. In summary, our results reveal that FATP2 is a key driver factor for HBx-induced hepatic lipid accumulation, and inhibition of FATP2 can ameliorates lipid accumulation caused by HBx. This study provides new insights into the mechanism of HBV-induced hepatic steatosis.

Research Experiences via Integrating Simulations and Experiments (REVISE): A Model Collaborative Research Project for Undergraduate Students in CO2 Sorbent Design.

Undergraduate research experiences are an instrumental component of student development, increasing conceptual understanding, promoting inquiry-based learning, and guiding potential career aspirations. Moving one step further, as research continues to become more interdisciplinary, there exists potential to accelerate student growth by granting additional perspectives through collaborative research. This study demonstrates the utilization of a model collaborative research project, specifically investigating the development of sorbent technologies for efficient CO2 capture, which is an important research area for improving environmental sustainability. A model CO2 sorbent system of heteroatom-doped porous carbon is utilized to enable students to gain knowledge of adsorption processes, through combined experimental and computational investigations and learnings. A particular emphasis is placed on creating interdisciplinary learning experiences, exemplified by using density functional theory (DFT) to understand molecular interactions between doped carbon surfaces and CO2 molecules as well as explain underlying physical mechanisms that govern experimental results. The experimental observations about CO2 sorption performance of doped ordered mesoporous carbons (OMCs) can be correlated with simulation results, which can explain how the presence of heteroatom functional groups impact the ability of porous carbon to selectively adsorb CO2 molecules. Through an inquiry-focused approach, students were observed to couple interdisciplinary results to construct holistic explanations, while developing skills in independent research and scientific communications. This collaborative research project allows students to obtain a deeper understanding of sustainability challenges, cultivate confidence in independent research, prepare for future career paths, and most importantly, be exposed to strategies employing interdisciplinary research approaches to address scientific challenges.

Reprocessable Networks from Vegetable Oils, Salts, and Food Acids: A Green Polymer Outreach Demonstration for Middle School Students.

Massive amounts of mismanaged plastic waste have led to growing concerns about their adverse impacts on the environment, ecosystem, and human health. Enabling efficient plastic recycling is a key component for developing a sustainable future, which requires cohesive efforts in technology innovations, public awareness, and workforce development. Particularly, outreach activities to inform the broader community about current efforts to fabricate sustainable polymeric materials can play a central role in inspiring future generations while also improving their knowledge, viewpoints, and behaviors to address plastic waste challenges. Herein, this account demonstrates an effort to educate middle school students about a key emerging concept in polymer science for sustainable material development: reprocessable polymer networks. Background information is provided to the students about the need to transition from petroleum-based chemical feedstocks to their bioderived counterparts. We note that the materials used in this demonstration lesson are all produced from common household foods, with which students routinely interact in various applications, making them not only safe but also compelling for the middle school classroom.

Correction: A generalized method for alignment of block copolymer films: solvent vapor annealing with soft shear.

Correction for 'A generalized method for alignment of block copolymer films: solvent vapor annealing with soft shear' by Zhe Qiang et al., Soft Matter, 2014, 10, 6068-6076, https://doi.org/10.1039/C4SM00875H.

The Different Prognoses of Hepatocellular Carcinoma with Previous Tenofovir versus Entecavir Treatment for Chronic Hepatitis B Virus: Analysis Based on 15 Propensity Score-Matched Studies.

BACKGROUND: Currently, enough studies with aggregated study-level data have demonstrated that there was no clinically meaningful difference in the risk of hepatocellular carcinoma (HCC) between patients who received entecavir and patients who received tenofovir treatment for chronic hepatitis B virus (CHBV). However, many studies found many differences in prognosis of these HCC patients. This meta-analysis of high-quality propensity score-matched (PSM) studies was designed to provide robust estimates for comparative HCC prognosis between groups receiving tenofovir or entecavir. METHODS: PubMed, Embase, Cochrane Library, and Web of Science were searched from inception to July 10, 2022, for relevant studies that compare the different prognoses of HCC between tenofovir and entecavir treatment. The primary outcomes were the difference of overall death or liver transplantation between tenofovir and entecavir treatment. The secondary outcomes included risk factors of overall death or liver transplantation and different treatment responses between tenofovir and entecavir treatment for CHBV. All statistical analyses were performed using the standard statistical procedures provided in Review Manager 5.2. RESULTS: A total of 15 PSM studies were identified, with 24,035 sample sizes in tenofovir group and 61,410 sample sizes in entecavir group, respectively. Pooled data indicated that, compared with entecavir, patients receiving tenofovir experienced significantly lower overall death or liver transplantation, with a pooled OR of 0.55 (95% CI: 0.45-0.68; p < 0.00001). Subgroup analysis by population also found similar results with pooled ORs of 0.52 (95% CI: 0.38-0.70; p < 0.0001) in entire cohort and 0.62 (95% CI: 0.50-0.77; p < 0.0001) in PSM cohort. Similarly, the subgroup analysis also found that HCC patients without cirrhosis receiving tenofovir experienced significantly lower overall death or liver transplantation than entecavir (OR: 0.56; 95% CI: 0.49-0.66), but no significant result was found in HCC patients with cirrhosis. In addition, both univariate (OR: 0.46; 95% CI: 0.31-0.69) and multivariable analyses (OR: 0.86; 95% CI: 0.82-0.91) also indicated significant reduction of overall death or liver transplantation in tenofovir group than entecavir group. CONCLUSION: Our analysis indicated that there was clinically meaningful difference in prognosis of HCC between patients who received entecavir and patients who received tenofovir. Patients who received tenofovir experienced much lower overall death or liver transplantation than patients who received entecavir. Tenofovir treatment may be one of independent favorable factors of prognosis for HCC patients with CHBV.

Fluorescence Resonance Energy Transfer Measurements in Polymer Science: A Review.

Fluorescence resonance energy transfer (FRET) is a non-invasive characterization method for studying molecular structures and dynamics, providing high spatial resolution at nanometer scale. Over the past decades, FRET-based measurements are developed and widely implemented in synthetic polymer systems for understanding and detecting a variety of nanoscale phenomena, enabling significant advances in polymer science. In this review, the basic principles of fluorescence and FRET are briefly discussed. Several representative research areas are highlighted, where FRET spectroscopy and imaging can be employed to reveal polymer morphology and kinetics. These examples include understanding polymer micelle formation and stability, detecting guest molecule release from polymer host, characterizing supramolecular assembly, imaging composite interfaces, and determining polymer chain conformations and their diffusion kinetics. Finally, a perspective on the opportunities of FRET-based measurements is provided for further allowing their greater contributions in this exciting area.

Environmental, Health, and Legislation Considerations for Rational Design of Nonreactive Flame-Retardant Additives for Polymeric Materials: Future Perspectives.

Increasing polymer usage has demanded functional additives that decrease fire hazards for end users. While traditional flame-retardant (FR) additives, such as halogenated, phosphorus, and metal hydroxides, greatly reduce flammability and associated fire hazards, research has continually exposed a litany of health and environmental safety concerns. This perspective aims to identify the key components of a successful FR additive and address material, environmental, and health concerns of existing additives. Legislation surrounding FRs and persistent organic pollutants is also discussed to highlight political perception that has resulted in the increased chemical regulations and subsequent banning of FR additives. Finally, future directions of this field regarding nonreactive additives, focusing on the use of bioinspired materials and transition metal chemistries to produce alternatives for polymers with efficacies surpassing traditional additives are presented.

Durable, magnetic-responsive melamine sponge composite for high efficiency,in situoil-water separation.

The development of durable and high-performance absorbents forin situoil-water separation is of critical importance for addressing severe water pollution in daily life as well as for solving accidental large-scale oil spillages. Herein, we demonstrate a simple and scalable approach to fabricate magnetic-responsive superhydrophobic melamine sponges byin situdeposition of PDA coatings and Fe3O4nanoparticles, followed by surface silanization with low surface energy 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PTOS) layer. The prepared melamine sponge composite (PTOS-Fe3O4@PDA/MF) not only exhibits a very high water contact angle of 165 ± 1.5° and an excellent ability to uptake a variety of oils and organic solvents (e.g. up to 141.1 g/g for chloroform), but also shows robust durability and superior recyclability. The PTOS-Fe3O4@PDA/MF sponge can also efficiently separate oils (or organic solvents) and water, as demonstrated by different model systems including immiscible oil-water solution mixture and miscible water-oil (W/O) emulsion (stabilized by surfactants). Furthermore, the PTOS-Fe3O4@PDA/MF sponge is able toin siturecover organics from water using a peristaltic pump, which gives it significant advantages over other traditional batch processes for oil-water separation. We believe that the PTOS-Fe3O4@PDA/MF sponge provides a very promising material solution to address oil-water separation, especially for the large-scale problems that have been long-time challenges with conventional sorption methods.

Developing Anisotropy in Self-Assembled Block Copolymers: Methods, Properties, and Applications.

Block copolymers (BCPs) self-assembly has continually attracted interest as a means to provide bottom-up control over nanostructures. While various methods have been demonstrated for efficiently ordering BCP nanodomains, most of them do not generically afford control of nanostructural orientation. For many applications of BCPs, such as energy storage, microelectronics, and separation membranes, alignment of nanodomains is a key requirement for enabling their practical use or enhancing materials performance. This review focuses on summarizing research progress on the development of anisotropy in BCP systems, covering a variety of topics from established aligning techniques, resultant material properties, and the associated applications. Specifically, the significance of aligning nanostructures and the anisotropic properties of BCPs is discussed and highlighted by demonstrating a few promising applications. Finally, the challenges and outlook are presented to further implement aligned BCPs into practical nanotechnological applications, where exciting opportunities exist.

Biomarkers for a histological chorioamnionitis diagnosis in pregnant women with or without group B streptococcus infection: a case-control study.

BACKGROUND: Chorioamnionitis may cause serious perinatal and neonatal adverse outcomes, and group B streptococcus (GBS) is one of the most common bacteria isolated from human chorioamnionitis. The present study analyzed the impact of GBS infection and histological chorioamnionitis (HCA) on pregnancy outcomes and the diagnostic value of various biomarkers. METHODS: Pregnant women were grouped according to GBS infection and HCA detection. Perinatal and neonatal adverse outcomes were recorded with a follow-up period of 6 weeks. The white blood cell count (WBC), neutrophil ratio, and C-reactive protein (CRP) level from peripheral blood and soluble intercellular adhesion molecule-1 (sICAM-1), interleukin 8 (IL-8), and tumor necrosis factor α (TNF-α) levels from cord blood were assessed. RESULTS: A total of 371 pregnant women were included. Pregnant women with GBS infection or HCA had a higher risk of pathological jaundice and premature rupture of membranes and higher levels of sICAM-1, IL-8, and TNF-α in umbilical cord blood. Univariate and multivariate regression analysis revealed that sICMA-1, IL-8, TNF-α, WBC, and CRP were significantly related to an increased HCA risk. For all included pregnant women, TNF-α had the largest receiver operating characteristic (ROC) area (area: 0.841; 95% CI: 0.778-0.904) of the biomarkers analyzed. TNF-α still had the largest area under the ROC curve (area: 0.898; 95% CI: 0.814-0.982) for non-GBS-infected pregnant women, who also exhibited a higher neutrophil ratio (area: 0.815; 95% CI: 0.645-0.985) and WBC (area: 0.849; 95% CI: 0.72-0.978), but all biomarkers had lower value in the diagnosis of HCA in GBS-infected pregnant women. CONCLUSION: GBS infection and HCA correlated with several perinatal and neonatal adverse outcomes. TNF-α in cord blood and WBCs in peripheral blood had diagnostic value for HCA in non-GBS-infected pregnant women but not GBS-infected pregnant women.

Salinomycin promotes T-cell proliferation by inhibiting the expression and enzymatic activity of immunosuppressive indoleamine-2,3-dioxygenase in human breast cancer cells.

Indoleamine 2,3 dioxygenase (IDO) is upregulated in many tumor types, including breast cancer, and plays a reputable role in promoting tumor immune tolerance. The importance of the immunosuppressive mechanism of IDO by suppressing T-cell function has garnered profound interest in the development of clinical IDO inhibitors. Herein, we established a screening method with cervical HeLa cells to induce IDO expression using interferon-γ (IFN-γ). After screening our chemical library, we found that salinomycin potently inhibited IFN-γ-stimulated kynurenine synthesis with IC50 values of 3.36-4.66 µM in both human cervical and breast cancer cells. Salinomycin lowered the IDO1 and IDO2 expression with no impact on the expression of tryptophan-2,3-dioxygenase. Interestingly, salinomycin potently repressed the IDO1 enzymatic activity by directly targeting the proteins in cells. Molecular docking revealed an alignment that favors nucleophilic attack of salinomycin in the catalytic domain of IDO1. Activation of the Janus kinase/signal transducer and activator of transcription (JAK/STAT) pathway by IFN-γ was significantly suppressed by salinomycin, via inhibiting the Jak1, Jak2, and STAT1/3 phosphorylation. Moreover, it inhibited IFN-γ-induced activation of the nuclear factor (NF)-κB pathway by inhibiting IκB degradation and NF-κB phosphorylation without affecting BIN1 expression. Furthermore, salinomycin significantly restored the proliferation of T cells co-cultured with IFN-γ-treated breast cancer cells and potentiated antitumor activity of cisplatin in vivo. These findings suggest that salinomycin suppresses kynurenine synthesis by inhibiting the catalytic activity of IDO1 and its expression by inhibiting the JAK/STAT and NF-κB pathways. Salinomycin warrants further investigation as a novel dual-functional IDO inhibitor for cancer immunotherapy.

Molecular Stereocomplexation for Enhancing the Stability of Nanoparticles Encapsulated in Polymeric Micelles for Magnetic Resonance Imaging.

A generalizable approach for improving the stability of polylactide-based (PLA-based) micelles for encapsulating nanoparticles (NPs) is demonstrated, using stereocomplexation between a pair of poly (ethylene glycol)-b-poly(d-lactide)/poly(ethylene glycol)-b-poly(l-lactide) block copolymer blends. Three different superparamagnetic ferrite-based NPs with distinct nanostructures are first prepared by the high-temperature pyrolysis method, including spherical MnFe2O4, cubic MnFe2O4, and core-shell MnFe2O4@Fe3O4. The diameters of these NPs are approximately 7-10 nm as revealed by transmission electron microscopy. These hydrophobic NPs can be encapsulated within self-assembled, stereocomplexed PLA (sc-PLA) micelles. All sc-PLA micelle systems loaded with three different NPs exhibit enhanced stability at elevated temperatures (20-60 °C) and with extended storage time (∼96 h) compared with analogous samples without stereocomplex formation, confirmed by dynamic light scattering measurements. The magnetic NP-loaded micelles with mean diameters of approximately 150 nm show both biocompatibility and superparamagnetic property. Under a 1.5 T magnetic field, cubic MnFe2O4 (c-MnFe2O4)-loaded micelles exhibit an excellent negative contrast enhancement of MR signals (373 mM-1·s-1), while core-shell MnFe2O4@Fe3O4-loaded micelles show a slightly lower signal for MR imaging (275 mM-1·s-1). These results suggest the potential of using sc-PLA-based polymer micelles as universal carriers for magnetic resonance imaging contrast agents with improved stability for different applications such as cancer diagnosis.

Au-Fe3O4 decorated polydopamine hollow nanoparticles as high performance catalysts with magnetic responsive properties.

We demonstrated a simple approach for fabricating Au-Fe3O4/PDA hollow nanoparticles as high-performance catalysts for water purification. The polydopamine (PDA) shell was in situ formed on the silica surface from self-polymerization, which acts as a medium support for coupling with metal ions (for Fe3O4 nanoparticle deposition) as well as a reducing agent and stabilizer for Au nanoparticle reduction and deposition. A step of simultaneous Fe3O4 nanoparticle deposition and silica core removal under alkaline conditions is first introduced in this study. This process significantly simplifies previous strategies which typically require the use of poisonous agents such as hydrogen fluoride or additional complicated post-treatment steps. Under optimized conditions, the Au-Fe3O4/PDA hollow nanoparticles show a high saturation magnetization of 18.8 emu g-1 and an excellent catalytic performance for the rapid reduction of p-nitrophenol with the reaction kinetic constant of 0.34 min-1. This catalyst can be easily recovered using a permanent magnet and recycled eight times with a high catalytic cycle stability. The strategy presented in this work provides a facile and versatile approach towards designing complicated Au-Fe3O4/PDA hollow nanostructures, which might have great potential for many applications within biological, energy, and environmental technologies.

Natural Polyketides Isolated from the Endophytic Fungus Phomopsis sp. CAM212 with a Semisynthetic Derivative Downregulating the ERK/IκBα Signaling Pathways.

Three previously undescribed natural products, phomopsinin A - C (1:  - 3: ), together with three known compounds, namely, cis-hydroxymellein (4: ), phomoxanthone A (5: ) and cytochalasin L-696,474 (6: ), were isolated from the solid culture of Phomopsis sp. CAM212, an endophytic fungus obtained from Garcinia xanthochymus. Their structures were determined on the basis of spectroscopic data, including IR, NMR, and MS. The absolute configurations of 1: and 2: were assigned by comparing their experimental and calculated ECD spectra. Acetylation of compound 1: yielded 1A: , a new natural product derivative that was tested together with other isolated compounds on lipopolysaccharide-stimulated RAW 264.7 cells. Cytochalasin L-696,474 (6: ) was found to significantly inhibit nitric oxide production, but was highly cytotoxic to the treated cells, whereas compound 1: slightly inhibited nitric oxide production, which was not significantly different compared to lipopolysaccharide-treated cells. Remarkably, the acetylated derivative of 1: , compound 1A: , significantly inhibited nitric oxide production with an IC50 value of 14.8 µM and no cytotoxic effect on treated cells, thereby showing the importance of the acetyl group in the anti-inflammatory activity of 1A: . The study of the mechanism of action revealed that 1A: decreases the expression of inducible nitric oxide synthase, cyclooxygenase 2, and proinflammatory cytokine IL-6 without an effect on IL-1ß expression. Moreover, it was found that 1A: exerts its anti-inflammatory activity in lipopolysaccharide-stimulated RAW 264.7 macrophage cells by downregulating the activation of ERK1/2 and by preventing the translocation of nuclear factor κB. Thus, derivatives of phomopsinin A (1: ), such as compound 1A: , could provide new anti-inflammatory leads.

Perturbation of epithelial apicobasal polarity by rhomboid family-1 gene overexpression.

The human rhomboid family (RHBDF)1 gene is highly expressed in breast cancer under clinical conditions but not in normal mammary gland tissues. Silencing the RHBDF1 gene in breast cancer xenograft tumors leads to inhibition of tumor growth. We show in this study that artificially raising RHBDF1 protein levels in the mammary epithelial cells MCF-10A results in severe perturbations of the ability of the cells to form lumen-containing acini, either in 3-dimensional cell cultures or implanted in mouse mammary fat pads. Knocking down RHBDF1 with short hairpin (sh)RNA leads to restoration of acinus formation. Consistently, RHBDF1 overexpression gives rise to disordered distribution of polarity markers GM130 and laminin-5, which otherwise are located in apical and basal positions, respectively, in the acini. Further investigations reveal that RHBDF1 directly binds to Par6a, a component of a protein complex consisting of partitioning-defective scaffold protein (Par)6, Par3, renin-angiotensin system-related C3 botulinum toxin substrate (Rac)1, and cell-division cycle (Cdc)42, which is structurally critical to the formation of apicobasal polarity. RHBDF1 binding to Par6a results in collapse of the protein complex and thus disruption of polarity formation. Since early stages of breast cancer are characterized by the loss of mammary gland epithelial cell polarity, our findings indicate that perturbations of apicobasal polarity by high levels of RHBDF1 is a significant attribute in the development of breast neoplasia.-Peng, X.-M., Gao, S., Deng, H.-T., Cai, H.-X., Zhou, Z., Xiang, R., Zhang, Q.-Z., Li, L.-Y. Perturbation of epithelial apicobasal polarity by rhomboid family-1 gene overexpression.

Design and Development of Novel 1,3,5-Triazine-Procaine Derivatives as Protective Agent against Myocardial Ischemia/Reperfusion Injury via Inhibitor of Nuclear Factor-κB.

The aim of the present study was to determine the protective effect of novel 1,3,5-triazine-procaine derivatives against myocardial ischemia/reperfusion (I/R) injury. Initially, the experiment has been started by the synthesis of procaine, which later got substituted with diverse 1,3,5-triazine derivatives to furnish the final compounds. The target compounds were tested for nuclear factor-κB (NF-κB) inhibitory activity in lipopolysaccharide (LPS)-stimulated RAW264.7 cells. The antioxidant activity of most potent compound 9i was investigated using hydroxyl radical, DPPH, and superoxide anion scavenging assay. Compound 9i was further evaluated for protective effect against myocardial I/R injury on the basis numerous parameters, for example, hemodynamic parameters (left ventricular developed pressure [LVDP], ±dp/dtmax, coronary flow [CF], and heart rate [HR]), myocardial enzymes (creatine kinase and lactate dehydrogenase), thiobarbituric acid reactive substance (TBARS), oxidative stress (super oxide dismutase [SOD], catalase [CAT], glutathione [GSH], and glutathione peroxidise [GPx]), histopathology, western blots analysis for B-cell lymphoma 2 (Bcl-2), Bcl-2-associated x protein (Bax), lectin-like oxidized low-density lipoprotein receptor-1 (LOX-1), and NF-κB in cardiac tissues. Compounds showed significant inhibition of NF-ĸB transcriptional activity in LPS-stimulated RAW264.7 cells, revealing compound 9i as a most potent derivative. In vitro results showed efficient reduction of reduced hydroxyl radical, DPPH, and superoxide anion by 9i. The level LVDP, ±dp/dtmax, CF, HR, TBARS, SOD, CAT, GSH, GPx, and damaged cardiac histopathology were completely restored to normal in 9i-treated group, as compared to I/R group. In western blot analysis, the expression of Bax, LOX-1, and NF-ĸB was found to be decreased, while the level of Bcl-2 was found to be increased in 9i-treated group. The procaine-1,3,5-triazine derivatives showed significant cardioprotective action via inhibition of NF-ĸB.

Impact of surface wettability on dynamics of supercooled water confined in nitrogen-doped ordered mesoporous carbon.

Confinement of water to nanoscale dimensions enables substantial supercooling through disruption of the hydrogen bonding network. However, there remain questions associated with the importance of the nature of the water-surface interactions relative to physical confinement defined by the pore geometry on the dynamics of supercooled water. Here, a simple route to tune the surface wetting properties through nitrogen doping of carbon is reported. This method leads to nearly indistinguishable mesopore sizes to enable separation of surface wettability and pore size effects. Quasielastic neutron scattering (QENS) is used to probe the proton dynamics of water confined within the mesopores with an average diameter of 4.85 ± 0.05 nm as a function of temperature from 267 K to 189 K. The motions of water in the mesopores follow jump-diffusion. For the temperatures examined, the diffusivity of water in the mesopores decreases with increasing nitrogen doping of the carbon framework. The activation energy associated with proton dynamics increases by approximately 30% with N-doping when compared to the undoped carbon surface, which is attributed to the enhanced surface wettability (favorable interactions between water and pore surface). This acts to provide an energy barrier for the water motions. This work suggests that the influence of surface chemistry on the dynamics of supercooled water confined in mesopores is less than the influence of nanopore size.

Fast-Response Turn-on Fluorescent Probes Based on Thiolysis of NBD Amine for H2 S Bioimaging.

Hydrogen sulfide (H2 S) is an important endogenous signaling molecule with multiple biological functions. New selective fluorescent turn-on probes based on fast thiolyling of NBD (7-nitro-1,2,3-benzoxadiazole) amine were explored for sensing H2 S in aqueous buffer and in living cells. The syntheses of both probes are simple and quite straightforward. The probes are highly sensitive and selective toward H2 S over other biologically relevant species. The fluorescein-NBD-based probe showed 65-fold green fluorescent increase upon H2 S activation. The rhodamine-NBD-based probe reacted rapidly with H2 S (t1/2 ≈1 min) to give a 4.5-fold increase in red fluorescence. Moreover, both probes were successfully used for monitoring H2 S in living cells and in mice. Based on such probe-based tools, we could observe H2 O2 -induced H2 S biogenesis in a concentration-dependent and time-dependent fashion in living cells.

Accelerated Amidization of Branched Poly(ethylenimine)/Poly(acrylic acid) Multilayer Films by Microwave Heating.

Chemical cross-linking of layer-by-layer assembled films promotes mechanical stability and robustness in a wide variety of environments, which can be a challenge for polyelectrolyte multilayers in saline environments or for multilayers made from weak polyelectrolytes in environments with extreme pHs. Heating branched poly(ethylenimine)/poly(acrylic acid) (BPEI/PAA) multilayers at sufficiently high temperatures drives amidization and dehydration to covalently cross-link the film, but this reaction is rather slow, typically requiring heating for hours for appreciable cross-linking to occur. Here, a more than one order of magnitude increase in the amidization kinetics is realized through microwave heating of BPEI/PAA multilayers on indium tin oxide (ITO)/glass substrates. The cross-linking reaction is tracked using infrared spectroscopic ellipsometry to monitor the development of the cross-linking products. For thick films (∼1500 nm), gradients in cross-link density can be readily identified by infrared ellipsometry. Such gradients in cross-link density are driven by the temperature gradient developed by the localized heating of ITO by microwaves. This significant acceleration of reactions using microwaves to generate a well-defined cross-link network as well as being a simple method for developing graded materials should open new applications for these polymer films and coatings.