RESUMO
An acoustic imaging algorithm is proposed herein for transient noise source time reconstruction. Time domain formulations are not well suited for acoustic imaging because of the size of the resulting system to be inversed. Based on the phase coherence principle widely used in ultrasound imaging and image processing, the first step of the algorithm consists in proposing the phase coherence metric used to reject pixels that are unlikely to contribute to the radiated sound field. This translates in a reduction of the domain size and ill-posedness of the problem. In the second step, the inverse problem is solved using the Tikhonov regularization and the generalized cross-validation to extract the vibration field on the imaging domain. Two test cases are considered: a simulated baffled piston and a panel submitted to a mechanical impact in anechoic conditions. The actual vibration field of the panel is measured with an optical technique for reference. In both numerical and experimental cases, the reconstructed vibration field using the proposed approach compares well with their respective reference. The results confirm that transient excitations can be localized and quantified with the proposed approach, in contrast with the classical time-domain beamforming that dramatically overestimates its magnitude.
RESUMO
In this paper, an active ultrasound-based touchscreen technology is presented for real-time monitoring of multiple contacts on a glass panel of 20 × 19 cm. Both fundamental Lamb wave modes are generated by sending a linear chirp between 50 and 100 kHz to a single piezoelectric ceramic lead zirconate titanate. Measurement is performed using four piezoelectric ceramic lead zirconate titanate elements, and real-time localization and detection are performed on a system on module i.MX 8 M Nano. Results show that Lamb waves can be used for real-time multi-touch detection and localization on both sides of the panel. Moreover, the prototype developed allows for relative pressure measurement.
RESUMO
The Correlation-Based (CB) imaging method is characterized by its high spatial resolution capabilities, but it is known to require heavy computational resources due to its high complexity. This paper shows that the CB imaging method can be used to estimate the phase of the complex reflection coefficients contained in the observation window. The resulting Correlation-Based Phase Imaging (CBPI) method can be used to segment and identify different features or tissue elasticity variations in a given medium. A Numerical validation is first proposed by considering a set of fifteen point-like scatterers on a Verasonics Simulator. Then, three experimental datasets are used to show the potential of CBPI on scatterers and specular reflectors. In vitro imaging results are first presented to show that CBPI allows retrieving phase information on hyperechoic reflectors, but also on weak reflectors such as elasticity targets. It is demonstrated that CBPI helps distinguishing regions of different elasticity, but of same low-contrast echogenicity, which is otherwise impossible with standard B-mode or Synthetic Aperture Focusing Techniques (SAFT). Then, CBPI of a needle in an ex vivo chicken breast is performed to show that the method works on specular reflectors. It is shown that the phase of the different interfaces associated to the first wall of the needle are well reconstructed using CBPI. The heterogeneous architecture used to enable real-time CBPI is presented. A Nvidia GeForce RTX 2080 Ti Graphics Processing Unit (GPU) is used to process the real-time acquired signals from a Verasonics Vantage 128 research echograph. Frame rates of 18 frames per second are achieved for the whole acquisition and signal processing chain on standard a 500 × 200 pixels grid.
RESUMO
Ultrafast ultrasound imaging allows observing rapid phenomena; combined with 3-D imaging it has the potential to provide a more accurate analysis of organs which leads, in the end, to better diagnosis. Coherent compounding using diverging waves is commonly used to reconstruct high-quality images on large volumes while keeping the frame rate high enough to allow dynamic analysis. In practice, the virtual sources (VSs) that drive the diverging waves are often distributed in a deterministic way: following a regular grid, concentric rings, and spirals. Even though those deterministic distributions can offer various tradeoffs in terms of imaging performance, other distributions can be considered to improve imaging performance. It is herein suggested to look at alternative VSs distributions for optimizing the lateral resolution and the secondary lobes level (SLL) on several point spread functions (PSFs) by means of a multiobjective genetic algorithm. The optimization framework has led to seven pseudo-irregular distributions of VSs distributions that have not yet been found in the literature. An analysis of the imaging performance with a simulated phantom shows that these new distributions offer different tradeoffs between lateral resolution and contrast, respectively, measured on point-like reflectors and anechoic cysts. As an example, one of these optimized distributions improves the lateral resolution by 16% and gives equivalent contrast values on cysts and PSF isotropy properties, when compared to a concentric-rings-based distribution.
RESUMO
Development, optimization and validation of transcranial ultrasound methods require the use of fresh human or animal skulls. However, to avoid fresh skull degradation over time, fixation methods are required for conservation, such as formaldehyde buffer solution. This method allows for conservation of the skull properties over a relatively long period, but requires specific conditioning (de-gassing) and storage conditions, such that its practical use is limited. Plastination appears to be a unique solution for the preservation and transportation of body parts without constraints. However, the influence of this conservation process has yet to be characterized with respect to ultrasound transmission to verify that the acoustic and mechanical properties of the skulls are not altered by the plastination process. The objective of the study described here was to quantify the effect of plastination on ultrasound transmission through the temporal and parietal areas of the human skull between 200 kHz and 2 MHz. To achieve this, transmission measurements were performed on three different skulls and four areas before and after plastination. It was found that the plastination process results in a transmission loss of 5 dB. Moreover, results indicate that the plastination process does not induce any phase shift in the transmitted signal, validating the proper use of plastinated skulls for in vitro measurements and development of new transcranial ultrasound methods.
Assuntos
Plastinação , Animais , Humanos , Plastinação/métodos , Crânio/diagnóstico por imagem , Ultrassonografia , Cabeça , AcústicaRESUMO
Acoustic imaging can be performed using a spherical microphone array (SMA) and conventional beamforming (CBF) or spherical harmonic beamforming (SHB). At low frequencies, the mainlobe width depends on the SMA radius for CBF and on the order of the spherical harmonics expansion for SHB, which is related to the number of microphones. In this letter, Kriging is used to virtually increase the SMA radius and/or the number of microphones. Numerical and experimental investigations show the effectiveness of Kriging to reduce the mainlobe width and thus improve the acoustic images obtained with a SMA and CBF or SHB.
RESUMO
Germanium (Ge) is increasingly used as a substrate for high-performance optoelectronics, photovoltaics, and electronic devices. These devices are usually grown on thick and rigid Ge substrates manufactured by classical wafering techniques. Nanomembranes (NMs) provide an alternative to this approach while offering wafer-scale lateral dimensions, weight reduction, waste limitation, and cost effectiveness. Herein, we introduce the Porous germanium Efficient Epitaxial LayEr Release (PEELER) process, which consists of the fabrication of wafer-scale detachable Ge NMs on porous Ge (PGe) and substrate reuse. We demonstrate the growth of Ge NMs with monocrystalline quality as revealed by high-resolution transmission electron microscopy (HRTEM) characterization. Together with the surface roughness below 1 nm, it makes the Ge NMs suitable for growth of III-V materials. Additionally, the embedded nanoengineered weak layer enables the detachment of the Ge NMs. Finally, we demonstrate the wet-etch-reconditioning process of the Ge substrate, allowing its reuse, to produce multiple free-standing NMs from a single parent wafer. The PEELER process significantly reduces the consumption of Ge in the fabrication process, paving the way for a new generation of low-cost flexible optoelectronic devices.
RESUMO
Polymer tanks made of Polypropylene (PP) sub-assemblies are commonly used for their ease of formability, surface and optical quality. The tightness of an assembly is classically assessed by pressurizing the vessel and measuring a pressure drop after a given period. In order to avoid this long and imprecise method, active ultrasound methods can be envisioned, but should be carefully designed in order to derive the proper transducer configurations, frequencies and assess the performances of the method in terms of repeatability and detectability. In this article, a thermoviscous Finite Element Model (FEM) is derived in order to predict the effect of realistic damages on the measured transmitted acoustic field in bonded polymer joints. Three damage scenarios are considered, namely through holes, flat-bottom holes and internal voids that may impair the tightness and durability of a polymer assembly. Numerical results in terms of on-axis sound pressure spectra and directivity diagrams are presented and verified experimentally on a flat panel. These results allow the derivation of design rules for the active inspection of polymer jointed structures.
RESUMO
In pulp and paper mills, mechanical processes such as screening and washing are commonly used to remove accumulated solid suspensions and concentrate the pulp. For environmental reasons and to optimize paper production, an emerging challenge is to develop alternative methods to concentrate paper pulp between 3 % and 6 % consistency for which the mixed pulp-water flow is complex. Among the proposed solutions in the literature, solutions based on acoustic levitation, also referred as acoustophoresis, of low-consistency pulp have been demonstrated as a potential solution for efficient pulp concentration and water recirculation. However, no sensitivity analysis on the ultrasound and physical parameters was proposed, limiting the extension to a realistic application. Thus, this paper presents a numerical modeling of acoustophoresis for pulp flow concentration in a pipe. For this purpose, the pulp flow is defined as a pseudo-homogenous fluid with a turbulent Low Re k- ∊ formalism, and the pulp particles are considered spherical and deflected by two acoustic forces, namely the acoustic radiation force and the Stokes drag force, both induced by an ultrasound wave generated along the walls of a circular pipe. The combined action of these two forces in the pulp flow enables to concentrate the particles at the center of the pipe. The influences of particle size and mechanical properties, fluid properties and ultrasound parameters are analyzed within a parametric study to optimize the particle deflection and the pulp concentration. The experimental feasibility of the industrial use of acoustophoresis for the concentration of paper pulp is demonstrated with a concentration gain up to 15 %.
RESUMO
The problem under study in this article is the active control of sound transmission and radiation of a panel under a periodic excitation. The control strategy investigated uses independent control loops between an individual polyvinylidene fluoride (PVDF) sensor and an individual lead zirconate titanate (PZT) actuator. The specific approach employed here uses the concept of virtual impedance. The aim is to determine for each frequency the optimal impedance between each PVDF sensor and the corresponding PZT actuator in order to reduce the sound power radiated by the plate. Theoretical predictions are compared to measurements of the sound radiated and transmission loss of a panel mounted with eight PZT-PVDF units. Reductions of up to 20 dB of the acoustic power can be achieved around mechanical resonances of the system, while the control strategy has little effect for off-resonance excitations.
RESUMO
Validation of guided-wave based systems for Non-Destructive Evaluation (NDE) and Structural Health Monitoring (SHM) under realistic conditions or environment requires complex setups. For this purpose, numerical or theoretical approaches are useful to save time and cost associated with experiential tests. However, the interaction with realistic geometrical (rivets, thickness changes, stiffeners, extrusions) or damage features (fatigue cracks, fillet cracks, delaminations, disbonds) must be accurately captured in order to be representative. In this paper, an experimental methodology is presented for estimating the far-field scattering of geometrical or damage features. The principle is based on the use of a Hankel transform of the measured 3D velocity field in order to evaluate with precision and repeatability the scattered pattern using a spatially averaged method. Application to scattering of a hole with simulated machined and real fatigue cracks is proposed. It is observed that the simulated machined crack generally used as a reference standard can only model accurately the transmission behaviour while the scattering patterns are only similar when the wavelength is about the size of the crack, limiting the practical use of machined cracks for experimental validation of SHM or NDE systems.
RESUMO
This paper describes a novel array post-processing method for Non-Destructive Evaluation (NDE) using phased-array ultrasonic probes. The approach uses the capture and processing of the full matrix of all transmit-receive time-domain signals from a transducer array as in the case of the Total Focusing Method (TFM), referred as the standard of imaging algorithms. The proposed technique is based on correlation of measured signals with theoretical propagated signals computed over a given grid of points. In that case, real-time imaging can be simply implemented using discrete signal product. The advantage of the present technique is to take into account transducer directivity, dynamics and complex propagation patterns, such that the number of required array elements for a given imaging performance can be greatly reduced. Numerical and experimental application to contact inspection of isotropic structure is presented and real-time implementation issues are discussed.
RESUMO
Classically, damage detection or dispersion curve determination using piezoceramic-generated guided waves has been based on analysis of propagation properties of multiple narrowband excitation signals. However, dispersion and multimodal propagation impair the determination of propagation properties. More recently, it has been proposed to consider broadband excitations for both damage imaging and group velocity estimation. Among existing transducer technologies, although laser excitation is prone to practical limitations in terms of dimensions and generated amplitudes, it allows generation of noncontact, point-like broadband displacement. Thus, broadband generation of guided waves using piezoceramics can be envisioned. However, direct impulse response measurements are limited by the generated amplitude, leading to low SNR measurements. For this purpose, chirp excitations have been proposed using variable-frequency bursts, leading to phase and amplitude variations with respect to the frequency, such that this approach is not suitable for precise estimation of time of flight (ToF) or modal amplitude. In this paper, a sub-band decomposition technique that allows high-SNR measurements of impulse response in a given frequency range is proposed. Broadband excitation is decomposed over a given number of frequency sub-bands, generated by a piezoceramic element and measurement is performed using a laser Doppler vibrometer (LDV) or a piezoceramic sensor. Application to experimental estimation of group velocity and damage detection in pitchcatch configuration is proposed. It is shown that the proposed method allows damage estimation without a priori knowledge of the damage size, whereas narrowband techniques can fail at specific wavelengths.