A Chitosan-Based Flocculation Method for Efficient Recovery of High-Purity B-Phycoerythrin from a Low Concentration of Phycobilin in Wastewater.

Increasing the yield and purity of B-phycoerythrin (B-PE) can improve the economic state of microalgae industrial processing. One method of cost reduction involves the recovery of remaining B-PE from wastewater. In this study, we developed a chitosan (CS)-based flocculation technique for the efficient recovery of B-PE from a low concentration of phycobilin in wastewater. We investigated the effects of the molecular weight of chitosan, B-PE/CS mass ratio, and solution pH on the flocculation efficiency of CS and the effects of phosphate buffer concentration and pH on the recovery rate of B-PE. The maximum flocculation efficiency of CS, recovery rate, and purity index of B-PE were 97.19% ± 0.59%, 72.07% ± 1.37%, and 3.20 ± 0.025 (drug grade), respectively. The structural stability and activity of B-PE were maintained during the recovery process. Economic evaluation revealed that our CS-based flocculation method is more economical than the ammonium sulfate precipitation method is. Furthermore, the bridging effect and electrostatic interaction play important roles in B-PE/CS complex flocculation process. Hence, our study provides an efficient and economical method to recover high-purity B-PE from a low concentration of phycobilin in wastewater, which promoted the application of B-PE as a natural pigment protein in food and chemical applications.

Anti-Photoaging Effects of Nanocomposites of Amphiphilic Chitosan/18ß-Glycyrrhetinic Acid.

Improving the transdermal absorption of weakly soluble drugs for topical use can help to prevent and treat skin photoaging. Nanocrystals of 18ß-glycyrrhetinic acid (i.e., NGAs) prepared by high-pressure homogenization and amphiphilic chitosan (ACS) were used to form ANGA composites by electrostatic adsorption, and the optimal ratio of NGA to ACS was 10:1. Dynamic light scattering analysis and zeta potential analysis were used to evaluate the nanocomposites' suspension, and the results showed that mean particle size was 318.8 ± 5.4 nm and the zeta potential was 30.88 ± 1.4 mV after autoclaving (121 °C, 30 min). The results of CCK-8 showed that the half-maximal inhibitory concentration (IC50) of ANGAs (71.9 µg/mL) was higher than that of NGAs (51.6 µg/mL), indicating that the cytotoxicity of ANGAs was weaker than that of NGAs at 24 h. After the composite had been prepared as a hydrogel, the vertical diffusion (Franz) cells were used to investigate skin permeability in vitro, and it was shown that the cumulative permeability of the ANGA hydrogel increased from 56.5 ± 1.4% to 75.3 ± 1.8%. The efficacy of the ANGA hydrogel against skin photoaging was studied by constructing a photoaging animal model under ultraviolet (UV) irradiation and staining. The ANGA hydrogel improved the photoaging characteristics of UV-induced mouse skin significantly, improved structural changes (e.g., breakage and clumping of collagen and elastic fibers in the dermis) significantly, and improved skin elasticity, while it inhibited the abnormal expression of matrix metalloproteinase (MMP)-1 and MMP-3 significantly, thereby reducing the damage caused by UV irradiation to the collagen-fiber structure. These results indicated that the NGAs could enhance the local penetration of GA into the skin and significantly improve the photoaging of mouse skin. The ANGA hydrogel could be used to counteract skin photoaging.

Progress in Research of Chitosan Chemical Modification Technologies and Their Applications.

Chitosan, which is derived from chitin, is the only known natural alkaline cationic polymer. Chitosan is a biological material that can significantly improve the living standard of the country. It has excellent properties such as good biodegradability, biocompatibility, and cell affinity, and has excellent biological activities such as antibacterial, antioxidant, and hemostasis. In recent years, the demand has increased significantly in many fields and has huge application potential. Due to the poor water solubility of chitosan, its wide application is limited. However, chemical modification of the chitosan matrix structure can improve its solubility and biological activity, thereby expanding its application range. The review covers the period from 1996 to 2022 and was elaborated by searching Google Scholar, PubMed, Elsevier, ACS publications, MDPI, Web of Science, Springer, and other databases. The various chemical modification methods of chitosan and its main activities and application research progress were reviewed. In general, the modification of chitosan and the application of its derivatives have had great progress, such as various reactions, optimization of conditions, new synthetic routes, and synthesis of various novel multifunctional chitosan derivatives. The chemical properties of modified chitosan are usually better than those of unmodified chitosan, so chitosan derivatives have been widely used and have more promising prospects. This paper aims to explore the latest progress in chitosan chemical modification technologies and analyze the application of chitosan and its derivatives in various fields, including pharmaceuticals and textiles, thus providing a basis for further development and utilization of chitosan.

Grafting of 18ß-Glycyrrhetinic Acid and Sialic Acid onto Chitosan to Produce a New Amphipathic Chitosan Derivative: Synthesis, Characterization, and Cytotoxicity.

Chitosan is the only cationic polysaccharide found in nature. It has broad application prospects in biomaterials, but its application is limited due to its poor solubility in water. A novel chitosan derivative was synthesized by amidation of chitosan with 18ß-glycyrrhetinic acid and sialic acid. The chitosan derivatives were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and measurement of the zeta potential. We also investigated the solubility, cytotoxicity, and blood compatibility of chitosan derivatives. 18ß-glycyrrhetinic acid and sialic acid could be grafted onto chitosan molecular chains. The thermal stability of the synthesized chitosan derivatives was decreased and the surface was positively charged in water and phosphate-buffered saline. After chitosan had been modified by 18 ß-glycyrrhetinic acid and sialic acid, the solubility of chitosan was improved greatly in water and phosphate-buffered saline, and percent hemolysis was <5%. Novel amphiphilic chitosan derivatives could be suitable polymers for biomedical purposes.

Mussel-Inspired Catechol-Functionalized Hydrogels and Their Medical Applications.

Mussel adhesive proteins (MAPs) have a unique ability to firmly adhere to different surfaces in aqueous environments via the special amino acid, 3,4-dihydroxyphenylalanine (DOPA). The catechol groups in DOPA are a key group for adhesive proteins, which is highly informative for the biomedical domain. By simulating MAPs, medical products can be developed for tissue adhesion, drug delivery, and wound healing. Hydrogel is a common formulation that is highly adaptable to numerous medical applications. Based on a discussion of the adhesion mechanism of MAPs, this paper reviews the formation and adhesion mechanism of catechol-functionalized hydrogels, types of hydrogels and main factors affecting adhesion, and medical applications of hydrogels, and future the development of catechol-functionalized hydrogels.

A novel m-xylylene-diamine/glucose based-supramolecular eutectogels with tissue clearing for three dimensional histological imaging.

Hydrogel-based tissue clearing technologies have shown significant promise for deep-tissue imaging and subcellular-level optical 3D reconstruction of whole organs. This study proposes a novel approach utilizing a deep eutectic solvent (DES) formulated with glucose and m-xylylene-diamine (MXDA) to create a highly efficient tissue-clearing hydrogel system named the passive hydrogel clearing system (PHCS). PHCS achieved efficient tissue clearing through a single-step tissue gelation process. The resulting hydrogel-tissue complex exhibited thermoreversible properties, transitioning into a sol state upon heating and vice versa upon cooling. Notably, PHCS enabled media embedding, facilitating immunofluorescence histopathology. Additionally, the system demonstrated compatibility with various fluorescent probes, particularly lipophilic dyes. Our study successfully employed PHCS for the reconstruction of vascular structures within the intestine, enabling the generation of a 3D pathology model. These findings suggest that PHCS is a promising novel method for fabricating hydrogels for tissue clearing and holds great potential for application as a mounting medium for morphological imaging.

Bio-Multifunctional Sponges Containing Alginate/Chitosan/Sargassum Polysaccharides Promote the Healing of Full-Thickness Wounds.

Creation of bio-multifunctional wound dressings with potent hemostatic, antibacterial, anti-inflammatory, and angiogenesis features for bolstering the healing of full-thickness wounds is sought after for clinical applications. We created bio-multifunctional composite sponges by coupling alginate and chitosan with Sargassum pallidum polysaccharides through electrostatic interactions, calcium ion (Ca2+) crosslinking, and lyophilization. Alginate/chitosan (AC) sponges with different concentrations of Sargassum pallidum polysaccharides were obtained and termed AC, ACS-1%, ACS-2.5%, and ACS-5%. ACS-1% and ACS-2.5% sponges exhibited uniform porosity, high water vapor transmission rate, high water absorption, as well as good hemostatic and antibacterial abilities. ACS-2.5% sponges facilitated wound closure and promoted angiogenesis and re-epithelialization in the dermis. These data suggest that ACS sponges containing a certain amount of Sargassum pallidum polysaccharides could be employed for treatment of full-thickness skin wounds.

DHPW1 attenuation of UVB-induced skin photodamage in human immortalized keratinocytes.

Ultraviolet radiation (UVB) can result in photodamage to the skin and can seriously threaten health, particularly in the elderly. Oxidative stress and the inflammatory response have been shown to play a significant role in the process. In a previous study, we isolated, purified and identified a polysaccharide from the extract of Dendrobium huoshanense (DHPW1). In this study we evaluated the effect of DHPW1 on ameliorating the UVB photodamage of human immortalized keratinocytes (HaCaT). Cell proliferation and cell scratch assays were used to evaluate the viability of the HaCaT treated with DHPW1, and a fluorescent probe and Western blot analysis were used to examine the production of reactive oxygen species (ROS) and the expression of proinflammatory factors IL-1ß, IL-6, and NF-κB(p65). The results show that, compared with the control group (UVB irradiation only), DHPW1 significantly improved the viability of UVB-irradiated HaCaT and enhanced the migration rate of the cell scratch after 24 h. The scratch-healing rate reached 90 % after 36 h. DHPW1 also significantly inhibited UVB-induced oxidative stress and expression of proinflammatory factors . Compared with the control group, the production of ROS decreased by 49.11 %, and the relative protein expression of IL-6 and NF-κB(p65) decreased by up to 13.30 % and 31.02 %, respectively. It is concluded that DHPW1 can significantly improve viability and wound closure rate of UVB-irradiated HaCaT. In addition, it can reduce the expression of IL-1 and IL-6 by inhibiting the transcription of NF-κB(p65), thereby reducing inflammation and oxidative stress in UVB-irradiated HaCaT.

Use of 18ß-glycyrrhetinic acid nanocrystals to enhance anti-inflammatory activity by improving topical delivery.

18ß-Glycyrrhetinic acid (GA) is often topically applied in clinical treatment of inflammatory skin diseases. However, GA has poor solubility in water, which results in poor skin permeability and low bioavailability. Nanocrystallization of drugs can enhance their permeability and improve bioavailability. We prepared GA nanocrystals (Nano GA) by high-pressure homogenization. These nanocrystals were characterized by photon correlation spectroscopy, scanning electron microscopy, thermogravimetric analysis, and X-ray diffractometry. The ability of Nano GA to improve dermal permeability was investigated ex vivo using Franz diffusion vertical cells and mouse skin. The topical anti-inflammatory activity of Nano GA was assessed in vivo by a 12-O-tetradecanoyl phorbol-13-acetate (TPA)-induced model in mouse ears. The average particle size of a GA nanocrystalline suspension was 288.6 ± 7.3 nm, with a narrow particle-size distribution (polydispersity index ∼0.13 ± 0.10), and the particle size of the lyophilized powder increased (552.0 ± 9.8 nm). After nanocrystallization, the thermal stability and crystallinity decreased but solubility increased significantly. Nano GA showed higher dermal permeability than Coarse GA. Macroscopic and staining-based observations of mouse ears and the levels of proinflammatory factors and myeloperoxidase revealed that the Nano GA hydrogel exhibited better anti-edema ability and more strongly inhibited inflammation development than the Coarse GA hydrogel and indomethacin hydrogel (positive drug). These results suggest that Nano GA could be an efficacious topical therapeutic agent for skin inflammation.

Catechol functionalized chitosan/active peptide microsphere hydrogel for skin wound healing.

Chitosan-based thermosensitive hydrogels have been widely used in drug delivery and tissue engineering, but their poor bioactivity has limited their further applications. Integral active oyster peptide microspheres (OPM) with an average particle diameter of 3.9 µm were prepared with high encapsulation efficiency (72.8%) and loading capacity (11.9%), exhibiting desirable sustained release effects. Using catechol functionalized chitosan (CS-C) as the polymeric matrix, OPM as the filler, and ß-sodium glycerophosphate (ß-GP) as a thermal sensitizer, the thermosensitive hydrogel CS-C/OPM/ß-GP was prepared. Besides, the application of the hydrogel on wound healing was studied, and its biosafety was evaluated. The results of cell migration in vitro showed that the cell migration rate of CS-C/OPM/ß-GP reached 97.47 ± 5.41% within 48 h, indicating that the hydrogel accelerated the migration of L929 cells. As demonstrated in the mouse skin wound experiment, CS-C/OPM/ß-GP hydrogel not only inhibited the aggregation of diversified inflammatory cells and accelerated the generation of collagen fibers and new blood vessels of the wound, but also enhanced the synthesis of total protein (TP) in granulation tissue, and up-regulated the expression of Ki-67 and VEGF in the injury, thereby achieving fast wound healing. Safety evaluation results showed that CS-C/OPM/ß-GP hydrogel was not cytotoxic to L929 cells, and the hemolysis ratio was less than 5% within 1 mg/mL. In conclusion, CS-C/OPM/ß-GP hydrogel is expected as a promising medical dressing for wound healing.

Thermal degradation of agar: Mechanism and toxicity of products.

The mechanism of the thermal degradation and the toxicity of the thermal degradation products of agar were studied using TG/DTA, Fourier-transform infrared spectroscopy and pyrolysis gas chromatography/mass spectrometry. It was found that the thermal degradation of agar is a single-step reaction, the thermal degradation temperature (T0, Tp, Tf) increases with increasing gel strength (P) and the influence of P on the thermal degradation rate is modest. The thermal degradation of agar is an exothermic reaction, and the activation energy of the reaction increases with increasing P. In the thermal degradation, agar is first decomposed into 3,6-anhydropyran galactopyranose and galactopyranose, then 3,6-anhydropyran galactopyranose, and finally furyl hydroxymethyl ketone, through loop opening, dehydration and hydrogen transfer. Galactopyranose follows three degradation pathways, and its final degradation products are 3,4-atrosan, d-allose, furfural and 5-(hydroxymethyl)-2-furancarboxaldehyde. Of the degradation products, furyl hydroxymethyl ketone, furfural, and 5-(hydroxymethyl)-2-furancarboxaldehyde show some toxicity to humans.

Chitosan hydrogel in combination with marine peptides from tilapia for burns healing.

The purpose of this study was to develop a promising burns dressing. Chiosan (CS) has been widely used as biomaterials, in combination with marine peptides (MPs) extracted from seawater cultured Tilapia, the newly developed material Chitosan-Marine Peptides hydrogels (CSMP) in this study showed antibacterial activity, pro-cell proliferation and migration, well burning healing. Pathological examinations by HE staining demonstrated that CSMP had pronounced wound healing efficiencies. In burn wounds treated with CSMP, reepithelialization and collagen fiber deposition were observed on day 7, the epithelium was completely regenerated by day 14, and the wounds were completely healed by day 21. Furthermore, CSMP can up-regulate the expression of FGF2 and VEGF. Collectively, these results suggest that CSMP may enhance cell migration and promote the skin regeneration, which demonstrates the potential application of CSMP in burning healing.

Synthesis and characterization of chitosan quaternary ammonium salt and its application as drug carrier for ribavirin.

N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (HTCC) is hydro-soluble chitosan (CS) derivative, which can be obtained by the reaction between epoxypropyl trimethyl ammonium chloride (ETA) and CS. The preparation parameters for the synthesis of HTCC were optimized by orthogonal experimental design. ETA was successfully grafted into the free amino group of CS. Grafting of ETA with CS had great effect on the crystal structure of HTCC, which was confirmed by the XRD results. HTCC displayed higher capability to form nanoparticles by crosslinking with negatively charged sodium tripolyphosphate (TPP). Ribavrin- (RIV-) loaded HTCC nanoparticles were positively charged and were spherical in shape with average particle size of 200 nm. More efficient drug encapsulation efficiency and loading capacity were obtained for HTCC in comparison with CS, however, HTCC nanoparticles displayed faster release rate due to its hydro-soluble properties. The results suggest that HTCC is a promising CS derivative for the encapsulation of hydrophilic drugs in obtaining sustained release of drugs.