RESUMO
The present systematic review aimed to evaluate the associations between welding fumes exposure and changes in oxidative stress [superoxide dismutase (SOD) and malondialdehyde (MDA)] and DNA damage [8-hydroxy-2'-deoxyguanosine (8-OHdG) and DNA-protein crosslink (DPC)] markers in professional welders (PROSPERO CRD42022298115). Six electronic bibliographic databases were searched from inception through September 2021 to identify observational epidemiological studies evaluating the association between welding fumes exposures and changes in oxidative stress and DNA damage in professional welders. Two reviewers independently assessed the risk of bias and certainty of the evidence. A narrative synthesis of results was conducted using the Synthesis Without Meta-analysis (SWiM) method. Pooled mean differences with 95% confidence intervals were calculated in a random-effects meta-analysis for the outcomes of interest in the review. From 450 studies identified through the search strategy, 14 observational epidemiological studies were included in the review. Most studies reported significantly higher welding fumes levels in welders than in controls. The narrative synthesis results of SOD showed a significant difference between welders and controls, while the meta-analysis results of MDA did not show a significant difference between the studied groups (MD = 0.26; 95% CI, -0.03, 0.55). The meta-analysis results of 8-OHdG (MD = 9.38; 95% CI, 0.55-18.21) and DPC (MD = 1.07; 95% CI, 0.14-2) revealed significantly differences between the studied groups. The included studies were at high risk of exclusion and confounding bias. The certainty of the evidence for oxidative stress and DNA damage results were very low and moderate, respectively. Exposure to welding fumes and metal particles is associated with DNA damage in professional welders, and 8-OHdG and DPC might be considered reliable markers to assess DNA damage resulting from exposure to welding fumes. We recommend, however, that the evaluation of oxidative stress resulting from welding fumes exposure not be solely based on MDA and SOD.
Assuntos
Poluentes Ocupacionais do Ar , Exposição Ocupacional , Soldagem , 8-Hidroxi-2'-Desoxiguanosina , Poluentes Ocupacionais do Ar/análise , Poluentes Ocupacionais do Ar/toxicidade , Biomarcadores/análise , Dano ao DNA , Gases/análise , Humanos , Ferreiros , Exposição Ocupacional/efeitos adversos , Exposição Ocupacional/análise , Estresse Oxidativo , Superóxido DismutaseRESUMO
The fumes created from welding activities present a unique occupational hazard. Due to the complex processes which govern fume formation, the characterization of welding fumes is difficult. Emission factors (EFs) are one method to characterize fume formation from different processes and scenarios. This paper reviews the development of EFs and similar metrics both historic research which contributed to the US EPAs AP-42 summary of welding emission factors released in 1995, and more recent research initiatives. Through a critical analysis of what research has been done in this area and the strength of the emission factors developed, this paper proposes a set of recommendations for future research. Research on emission factors for gas metal arc welding (GMAW) is the most complete amongst the different types of electric arc welding. Despite it being generally known that flux core arc welding (FCAW) creates significant fume emissions compared to some of the other processes few studies have looked at FCAW since the AP-42. Shielded metal arc welding is also under-researched particularly in terms of metal-specific emission factors. The influence of different welding activity parameters such as welding location, speed or current is well defined for GMAW but requires more attention for other welding processes. Further effort towards compiling and comparing available emission factor data of quality, evaluating the available data statistically and organizing this data in a practically useful way is required. The availability of reliable emission factors will allow the development or improvement of exposure modelling tools that would be very useful for exposure assessment when monitoring is not practical.s.
Assuntos
Poluentes Ocupacionais do Ar , Exposição Ocupacional , Soldagem , Humanos , Poluentes Ocupacionais do Ar/análise , Exposição Ocupacional/análise , Soldagem/métodos , Metais/análise , GasesRESUMO
Welders are exposed to high levels of metal fumes, which could be resulting in various health impairments. Respirators became a practical protective option in workplaces, as they are lightweight and easy to use. This systematic review attempts to explore the field effectiveness of using respirators to reduce metal particle exposure in workplaces. We reviewed papers published from 1900 to April 2019 in five major bibliographic databases, including Embase, Web of Science, Medline, Scopus, and CINAHL, along with organizational websites to cover gray literature. In total, 983 references were identified from the databases, out of which, 520 duplicates were removed from the EndNote database. The remaining 463 references were screened for their title and abstract. Out of 463, 70 references went through the full-text screening. Finally, eight papers, including 19 workplace respirator studies, satisfied all the inclusion criteria and were reviewed in this report. The geometric means for metal levels in workers' breathing zone with and without respirators were 9.4 and 1,777 µg/m3 for iron, 1.1 and 139 µg/m3 for lead, 2.1 and 242 µg/m3 for zinc, and 27 and 1,398 µg/m3 for manganese oxide, respectively. Most reviewed studies reported significant differences between measured metal particle levels among workers who worn respirators and who did not. In addition, results showed that N95 provided significantly less protection than elastomeric half facepieces, full-face respirators, and powered air-purifying respirators (p<0.001). More field studies are recommended to investigate Workplace Protection Factor (WPF) and fit factor (FF) of different respirators to understand the actual protection levels that they could be provided to control welding fume exposure among welders in various workplaces.
Assuntos
Poluentes Ocupacionais do Ar , Exposição Ocupacional , Dispositivos de Proteção Respiratória , Humanos , Ferro , Exposição Ocupacional/análise , Exposição Ocupacional/prevenção & controle , Ventiladores Mecânicos , Local de TrabalhoRESUMO
OBJECTIVES: There is limited knowledge of exposure to polycyclic aromatic hydrocarbons (PAHs) in wildland firefighters, or of the effectiveness of interventions to reduce this. This study of wildland firefighters assessed whether PAHs were present and considered respiratory protection and enhanced skin hygiene as possible interventions. METHODS: 1-Hydroxypyrene (1-HP) was measured in urine samples collected pre-shift, post-shift, and next morning from wildland firefighters in Alberta and British Columbia. Skin wipes, collected pre- and post-shift, were analysed for eight PAHs. Breathing zone air samples were analysed for 11 PAHs. As pilot interventions, participants were randomized to either normal or enhanced skin hygiene. A sample of volunteers was assigned to a disposable N95 mask or a half facepiece mask with P100 organic vapour cartridge. Participants completed a brief questionnaire on activities post-shift and respiratory symptoms. RESULTS: Non-smoking firefighters (66 male and 20 female) were recruited from 11 fire crews. Air sampling pumps were carried for the full shift by 28 firefighters, 25 firefighters wore masks (14 N95 and 11 P100); 42 were assigned to the enhanced skin hygiene intervention. Sixty had hot spotting as their main task. Air monitoring identified PAHs (benzo(b,j,k)fluoranthene in particulates, phenanthrene in the gaseous phase) for 6 of the 11 crews. PAHs (largely naphthalene) were found post-shift on 40/84 skin wipes from the hand and 38/84 from jaw/throat. The mean increase in 1-HP in urine samples collected after the shift (compared with samples collected before the shift) was 66 ng g-1 creatinine (P < 0.001) with an increase over the shift found for 76% of participants. 1-HP in next morning urine samples was significantly lower than at the end of shift (a reduction of 39.3 ng g-1: P < 0.001). The amount of naphthalene on skin wipes was greater at the end of the shift (post) than at the start (pre). The mean post-pre weight difference of naphthalene on skin wipes taken from the hand was 0.96 ng wipe-1 (P = 0.01) and from the jaw/throat 1.28 ng wipe-1 (P = 0.002). The enhanced skin hygiene intervention lead to a larger reduction in 1-HP between end of shift and next morning urine samples but only for those with naphthalene on skin wipes at the end of shift. The difference in 1-HP concentration in urine samples collected before and after the shift was reduced for those wearing a mask (linear tend P = 0.063, one-sided). In multivariable models, 1-HP at end of shift was related to gaseous phase phenanthrene, estimated from air sampling [ß = 318.2, 95% confidence interval (CI) 67.1-569.2]. Naphthalene on hand skin wipes reflected work in hot spotting during the shift (ß = 0.53, 95% CI 0.22-0.86). CONCLUSIONS: This study provided evidence of PAHs in the air and on the skin of many, but not all, fire crew. Absorbed PAHs, reflected in 1-HP in urine, increased over the shift. Results from the pilot interventions suggest that enhanced skin hygiene would reduce absorption post fire where PAHs had been accumulated on the skin, and that masks could be effective in reducing PAH inhalation exposure. Interventions to reduce PAH absorption are supported by the pilot work reported here and warrant further evaluation across a full fire season.
Assuntos
Poluentes Ocupacionais do Ar , Bombeiros , Exposição Ocupacional , Hidrocarbonetos Policíclicos Aromáticos , Poluentes Ocupacionais do Ar/análise , Alberta , Feminino , Humanos , Masculino , Exposição Ocupacional/análise , Projetos Piloto , Hidrocarbonetos Policíclicos Aromáticos/análiseRESUMO
Welding fumes vary in composition depending on the materials and processes used, and while health outcomes in full-time welders have been widely studied, limited research on apprentices exists. Besides, few data are available for metals such as vanadium and antimony. This study aimed to look at individual metals present in welding fumes in the learning environment of apprentice welders. Forty-three welders and 41 controls were chosen from trade programmes at the Northern Alberta Institute of Technology. Ambient and personal air samples were collected at days 0, 1, 7, and 50 of their training and analysed for mass and metal concentrations using Inductively Coupled Plasma Mass Spectrometry. Results showed increases in particle and metal concentrations as apprentices progressed throughout their education and that concentrations at day 50 were similar to levels found in the literature for professional welders. Variable concentrations indicate that some individuals may not properly use the local exhaust ventilation system. Other possible explanation for variations are the position of the sampler on the shoulder, the time spent welding and in each welding position, and the skills of the welders. Strong relationships were observed between particle and metal concentrations, suggesting that these relationships could be used to estimate metal exposure in welders from particle exposure. Welding processes were the most important determinant of exposure in apprentice welders, with Metal Core Arc Welding producing the largest particle concentrations followed by oxyacetylene cutting, and Gas Metal Arc Welding. Health risk assessment showed that welder apprentices are at risk for overexposure to manganese, which suggests that professional welders should be monitored for manganese as they are exposed more than apprentices. Training in proper positioning of local exhaust ventilation system and proper use of respirators are recommended in training facilities.
Assuntos
Poluentes Ocupacionais do Ar , Exposição Ocupacional , Soldagem , Poluentes Ocupacionais do Ar/análise , Humanos , Exposição por Inalação/análise , Ferreiros , Exposição Ocupacional/análise , Medição de RiscoRESUMO
BACKGROUND: In the rapidly shifting Canadian climate, an ageing population, and increased migration, a greater understanding of how local climate and air pollution hazards impact older adults and immigrant populations will be necessary for mitigating and adapting to adverse health impacts. OBJECTIVES: To explore the reported health impacts of climate change and air pollution exposures in older adults and immigrant people living in Canada, identify known factors influencing risk and resilience in these populations and gaps in the literature. METHODS: We searched for research focused on older adults and immigrants living in Canada, published from 2010 onward, where the primary exposures were related to climate or air pollution. We extracted data on setting, exposures, health outcomes, and other relevant contextual factors. RESULTS AND DISCUSSION: We identified 52 eligible studies, most focused in Ontario and Quebec. Older people in Canada experience health risks due to climate and air pollution exposures. The extent of the risk depends on multiple factors. We found little information about the climate- and air pollution-related health impacts experienced by immigrant communities. CONCLUSIONS: Further research about climate- and air pollution-related exposures, health, and which factors promote or reduce resiliency in Canada's older adults and immigrant communities is necessary.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Emigrantes e Imigrantes , Idoso , Envelhecimento , Poluentes Atmosféricos/análise , Poluição do Ar/efeitos adversos , Poluição do Ar/análise , Canadá/epidemiologia , Mudança Climática , Humanos , Ontário/epidemiologiaRESUMO
Heavy metals are neurotoxic, associated with brain dysfunction, and have been linked with cognitive decline in adults. This study was aimed to characterize chronic exposure to metals (Cd, Be, Co, Hg, Sn, V, Al, Ba, Cr, Cu, Fe, Li, Mn, Ni, Pb, and Zn) and metalloids (As, B, Sb) and assess its impact on cognitive performance of Tehran's residents, capital of Iran. Scalp hair samples gathered from 200 volunteered participants (110 men and 90 women), aged 14-70 years and quantified by inductively coupled plasma atomic emission spectroscopy (ICP-OES). Attention and executive function, two measures of cognitive performance, were characterized using the trail making test (TMT) part A and B, respectively. Mental flexibility was characterized as the Delta TMT B-A scores and cognitive efficiency or dissimulation as the ration between TMT B and A scores. A comprehensive questionnaire was used to gather information on demographic and socioeconomic as well as lifestyle and health status. The highest and lowest mean concentrations were observed for B (325 µg/g) and As (0.29 µg/g), respectively. Results indicated that chronic metal exposure measured in hair changed significantly based on gender and age (p < 0.05). The levels of Cr, Fe, Ni, Si, Hg, Pb and B were significantly higher in males' hair, whereas those of Ag and Ba were greater in females' hair (p < 0.05). The results of the cognitive TMT test were significantly different between gender and age groups (p < 0.05). Moreover, results revealed that As, Hg, Mn, and Pb levels in hair were significantly associated with poorer participants' performance scores in the TMT test (p < 0.05). Age, gender, cigarette smoking, water-pipe smoking, traffic density in the area of residence, and dental amalgam filling were significant factors affecting the TMT test scores. The results suggest that chronic exposure to metals has detrimental effects on attention, executive function, mental flexibility and cognitive efficiency.
Assuntos
Função Executiva , Adolescente , Adulto , Idoso , Atenção , Exposição Ambiental , Monitoramento Ambiental , Feminino , Humanos , Irã (Geográfico) , Masculino , Metais Pesados , Pessoa de Meia-Idade , Adulto JovemRESUMO
Urinary benzene, toluene, ethylbenzene, and xylenes (BTEX) can be used as a reliable biomarker of exposure to these pollutants. This study was aimed to investigate the urinary BTEX concentration in operators of healthcare waste (HCW) autoclaves. This cross-sectional study was conducted in selected hospitals in Tehran, Iran between April and June 2017. Twenty operators (as the case group) and twenty control subjects were enrolled in the study. Personal urine samples were collected at the beginning and end of the work shift. Urinary BTEX were measured by a headspace gas chromatography-mass spectrometry (GC/MS). A detailed questionnaire was used to gather information from subjects. Results showed that the median of urinary benzene, toluene, ethylbenzene, m-p xylene, and o-xylene levels in the exposed group were 3.26, 3.36, 0.84, 3.94 and 4.48⯵g/L, respectively. With the exception of ethylbenzene, subjects in the exposed group had significantly higher urinary BTEX levels than control group (pâ¯<â¯0.05). Urinary BTEX concentrations in the exposed case group were 2.5-fold higher than in the control group. There was a significant relationship between the amount of generated waste per day and the urinary BTEX in the exposed group. Smoking status and type of autoclave used were also identified as predictors of urinary BTEX concentrations. The healthcare waste treatment autoclaves can be considered as a significant BTEX exposure source for operators working with these treatment facilities. The appropriate personal protection equipment and control measures capable in reducing BTEX exposure should be provided to HCW workers to reduce their exposures to BTEX.
Assuntos
Poluentes Ocupacionais do Ar/urina , Eliminação de Resíduos de Serviços de Saúde/métodos , Exposição Ocupacional/análise , Adulto , Benzeno/análise , Benzeno/metabolismo , Derivados de Benzeno/urina , Biomarcadores/urina , Estudos Transversais , Monitoramento Ambiental/métodos , Humanos , Irã (Geográfico) , Tolueno/análise , Tolueno/urina , Xilenos/análise , Xilenos/urinaRESUMO
The objective of this project was to create similar exposure groups (SEGs) for occupational monitoring in a structural steel fabrication facility. Qualitative SEG formation involved worksite observation, interviews, and audits of materials and procedures. These were supplemented with preliminary task-based shop survey data collected using a condensation particle counter. A total of six SEGs were formed, with recommendations for occupational exposure sampling for five groups, as well as ambient sampling recommendations to address areas on the operational floor found to have higher particle concentrations. The combination of direct reading device data and qualitative SEG formation techniques is a valuable approach, as it contains both the monetary and temporal costs of worksite exposure monitoring. This approach also provides an empowering in-house analysis of potentially problematic areas, and results in the streamlining of occupational exposure assessment.
RESUMO
BACKGROUND: Proton nuclear magnetic resonance (1H NMR, or NMR) spectroscopy and inductively coupled plasma-mass spectrometry (ICP-MS) are commonly used for metabolomics and metal analysis in urine samples. However, creatinine quantification by NMR for the purpose of normalization of urinary metals has not been validated. We assessed the validity of using NMR analysis for creatinine quantification in human urine samples in order to allow normalization of urinary metal concentrations. METHODS: NMR and ICP-MS techniques were used to measure metabolite and metal concentrations in urine samples from 10 healthy subjects. For metabolite analysis, two magnetic field strengths (600 and 700MHz) were utilized. In addition, creatinine concentrations were determined by using the Jaffe method. RESULTS: Creatinine levels were strongly correlated (R2=0.99) between NMR and Jaffe methods. The NMR spectra were deconvoluted with a target database containing 151 metabolites that are present in urine. A total of 50 metabolites showed good correlation (R2=0.7-1.0) at 600 and 700MHz. Metal concentrations determined after NMR-measured creatinine normalization were comparable to previous reports. CONCLUSIONS: NMR analysis provided robust urinary creatinine quantification, and was sufficient for normalization of urinary metal concentrations. We found that NMR-measured creatinine-normalized urinary metal concentrations in our control subjects were similar to general population levels in Canada and the United Kingdom.
Assuntos
Creatinina/urina , Espectroscopia de Ressonância Magnética/normas , Metabolômica/normas , Metais/urina , Urinálise/normas , Adulto , Calibragem , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Exposição Ocupacional/análise , Padrões de Referência , Adulto JovemRESUMO
The data in this article are related to the research entitled, "Assessment of 1H NMR-based metabolomics analysis for normalization of urinary metals against creatinine" (M. Cassiède, S. Nair, M. Dueck, J. Mino, R. McKay, P. Mercier, B. Quémerais, P. Lacy, 2016) [1]. This article describes the analysis of urinary metabolites in normal, healthy individuals by 1H NMR-based metabolomics. NMR spectra of urine samples typically contain hundreds of peaks that must be carefully screened for reproducibility and detectability. An important requirement in the screening of appropriate urinary metabolites is to ensure that they are reproducibly detected. In our study, we applied the peak profiles of 151 known urinary metabolites to 10 normal human urine samples and found that 50 metabolites were reproducibly measured between 600 and 700 MHz magnets in the same samples. The data set has been made publicly available to enable critical or extended analysis.
RESUMO
Metabolomics is a rapidly expanding field of systems biology that is gaining significant attention in many areas of biomedical research. Also known as metabonomics, it comprises the analysis of all small molecules or metabolites that are present within an organism or a specific compartment of the body. Metabolite detection and quantification provide a valuable addition to genomics and proteomics and give unique insights into metabolic changes that occur in tangent to alterations in gene and protein activity that are associated with disease. As a novel approach to understanding disease, metabolomics provides a "snapshot" in time of all metabolites present in a biological sample such as whole blood, plasma, serum, urine, and many other specimens that may be obtained from either patients or experimental models. In this article, we review the burgeoning field of metabolomics in its application to acute lung diseases, specifically pneumonia and acute respiratory disease syndrome (ARDS). We also discuss the potential applications of metabolomics for monitoring exposure to aerosolized environmental toxins. Recent reports have suggested that metabolomics analysis using nuclear magnetic resonance (NMR) and mass spectrometry (MS) approaches may provide clinicians with the opportunity to identify new biomarkers that may predict progression to more severe disease, such as sepsis, which kills many patients each year. In addition, metabolomics may provide more detailed phenotyping of patient heterogeneity, which is needed to achieve the goal of precision medicine. However, although several experimental and clinical metabolomics studies have been conducted assessing the application of the science to acute lung diseases, only incremental progress has been made. Specifically, little is known about the metabolic phenotypes of these illnesses. These data are needed to substantiate metabolomics biomarker credentials so that clinicians can employ them for clinical decision-making and investigators can use them to design clinical trials.