RESUMO
Hydrogen (H2 ) produced from renewables will have a growing impact on the global energy dynamics towards sustainable and carbon-neutral standards. The share of green H2 is still too low to meet the net-zero target, while the demand for high-quality hydrogen continues to rise. These factors amplify the need for economically viable H2 generation technologies. The present article aims at evaluating the existing technologies for high-quality H2 production based on solar energy. Technologies such as water electrolysis, photoelectrochemical and solar thermochemical water splitting, liquid metal reactors and plasma conversion utilize solar power directly or indirectly (as carbon-neutral electrons) and are reviewed from the perspective of their current development level, technical limitations and future potential.
RESUMO
The microkinetics of the electrocatalytic oxygen evolution reaction substantially determines the performance in proton-exchange membrane water electrolysis. State-of-the-art nanoparticulated rutile IrO2 electrocatalysts present an excellent trade-off between activity and stability due to the efficient formation of intermediate surface species. To reveal and analyze the interaction of individual surface processes, a detailed dynamic microkinetic model approach is established and validated using cyclic voltammetry. We show that the interaction of three different processes, which are the adsorption of water, one potential-driven deprotonation step, and the detachment of oxygen, limits the overall reaction turnover. During the reaction, the active IrO2 surface is covered mainly by *O, *OOH, and *OO adsorbed species with a share dependent on the applied potential and of 44, 28, and 20% at an overpotential of 350 mV, respectively. In contrast to state-of-the-art calculations of ideal catalyst surfaces, this novel model-based methodology allows for experimental identification of the microkinetics as well as thermodynamic energy values of real pristine and degraded nanoparticles. We show that the loss in electrocatalytic activity during degradation is correlated to an increase in the activation energy of deprotonation processes, whereas reaction energies were marginally affected. As the effect of electrolyte-related parameters does not cause such a decrease, the model-based analysis demonstrates that material changes trigger the performance loss. These insights into the degradation of IrO2 and its effect on the surface processes provide the basis for a deeper understanding of degrading active sites for the optimization of the oxygen evolution performance.
RESUMO
Asymmetric catalysis is seen as one of the most economical strategies to satisfy the growing demand for enantiomerically pure small molecules in the fine chemical and pharmaceutical industries. And visible light has been recognized as an environmentally friendly and sustainable form of energy for triggering chemical transformations and catalytic chemical processes. For these reasons, visible-light-driven catalytic asymmetric chemistry is a subject of enormous current interest. Photoredox catalysis provides the opportunity to generate highly reactive radical ion intermediates with often unusual or unconventional reactivities under surprisingly mild reaction conditions. In such systems, photoactivated sensitizers initiate a single electron transfer from (or to) a closed-shell organic molecule to produce radical cations or radical anions whose reactivities are then exploited for interesting or unusual chemical transformations. However, the high reactivity of photoexcited substrates, intermediate radical ions or radicals, and the low activation barriers for follow-up reactions provide significant hurdles for the development of efficient catalytic photochemical processes that work under stereochemical control and provide chiral molecules in an asymmetric fashion. Here we report a highly efficient asymmetric catalyst that uses visible light for the necessary molecular activation, thereby combining asymmetric catalysis and photocatalysis. We show that a chiral iridium complex can serve as a sensitizer for photoredox catalysis and at the same time provide very effective asymmetric induction for the enantioselective alkylation of 2-acyl imidazoles. This new asymmetric photoredox catalyst, in which the metal centre simultaneously serves as the exclusive source of chirality, the catalytically active Lewis acid centre, and the photoredox centre, offers new opportunities for the 'green' synthesis of non-racemic chiral molecules.
RESUMO
A single chiral octahedral iridium(III) complex is used for visible light activated asymmetric photoredox catalysis. In the presence of a conventional household lamp and under an atmosphere of air, the oxidative coupling of 2-acyl-1-phenylimidazoles with N,N-diaryl-N-(trimethylsilyl)methylamines provides aminoalkylated products in 61-93 % yields with high enantiomeric excess (90-98 % ee). Notably, the iridium center simultaneously serves three distinct functions: as the exclusive source of chirality, as the catalytically active Lewis acid, and as a central part of the photoredox sensitizer. This conceptionally simple reaction Scheme may provide new avenues for the green synthesis of non-racemic chiral molecules.
RESUMO
The [4 + 2] cross-benzannulation of conjugated enynes and diynes under cobalt-catalysis led to 1,2,3-trisubstituted benzene derivatives in good yields. The reaction proceeds smoothly in absolute regiospecific control when symmetrical diynes are applied. Moreover, the use of unsymmetrical diynes was investigated, resulting in the formation of the unprecedented regioisomers as major products, which is in contrast to the results obtained in palladium-catalyzed benzannulation reactions. Also, 4-bromophenyl-substituted starting materials could be applied successfully in the cobalt-catalyzed process, which can be problematic in the palladium-catalyzed counterpart.
RESUMO
The cobalt(I)-catalysed 1,4-hydrovinylation reaction of allyloxytrimethylsilane and allyl alcohol with substituted 1,3-dienes leads to hydroxy-functionalised 1,4-dienes in excellent regio- and diastereoselective fashion. Those 1,4-dienols can be converted into tetrahydrofuran and pyran derivatives under indirect electrochemical conditions generating selenium or iodonium cations. The reactions proceed in good yields and regioselectivities for the formation of single diastereomers.
RESUMO
Multicomponent reactions are attractive for assembling functionalized heterocyclic compounds. To this end, an efficient gold-catalyzed three-component domino reaction to form oxazoles directly from imines, alkynes, and acid chlorides is presented. The reaction proceeds in a single synthetic step by using a gold(III)-N,N'-ethylenebis(salicylimine) (salen) catalyst to give trisubstituted oxazoles in up to 96 % yield. The substrate scope, a mechanistic study exploring the role of the gold catalyst, and the synthetic applications of the oxazole products are discussed.
Assuntos
Alcinos/química , Ouro/química , Iminas/química , Oxazóis/síntese química , Alcinos/síntese química , Catálise , Técnicas de Química Combinatória , Espectroscopia de Ressonância Magnética , Estrutura Molecular , Oxazóis/químicaRESUMO
Conducting polymers integrated with metal oxides create opportunities for hybrid capacitive electrodes. In this work, we report a one-pot oxidative polymerization for the synthesis of integrated conductive polyindole/nickel oxide (PIn/NiO), polyindole/zinc oxide (PIn/ZnO), and polyindole/nickel oxide/zinc oxide (PNZ). The polymers were analyzed thoroughly for their composition and physical as well as chemical properties by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), and thermogravimetric analysis (TGA). The PIn and its composites were processed into electrodes, and their use in symmetrical supercapacitors in two- and three-electrode setups was evaluated by cyclic voltammetry (CV), galvanostatic discharge (GCD), and electrochemical impedance spectroscopy (EIS). The best electrochemical charge storage capability was found for the ternary PNZ composite. The high performance directly correlates with its uniformly shaped nanofibrous structure and high crystallinity. For instance, the symmetrical supercapacitor fabricated with PNZ hybrid electrodes shows a high specific capacitance of 310.9 F g-1 at 0.5 A g-1 with an energy density of 42.1 Wh kg-1, a power density of 13.2 kW kg-1, and a good cycling stability of 78.5% after 5000 cycles. This report presents new electrode materials for advanced supercapacitor technology based on these results.
RESUMO
A polybenzopyrrole@nickel oxide (Pbp@NiO) nanocomposite was synthesized by an oxidative chemical one-pot method and tested as an active material for hybrid electrodes in an electrochemical supercapattery device. The as-prepared composite material exhibits a desirable 3D cross-linked nanostructured morphology and a synergistic effect between the polymer and metal oxide, which improved both physical properties and electrochemical performance. The unprocessed material was characterized by X-ray diffraction, FTIR and UV-Vis spectroscopy, scanning electron microscopy/energy disperse X-ray analysis, and thermogravimetry. The nanocomposite material was deposited without a binder on gold current collectors and investigated for electrochemical behavior and performance in a symmetrical two- and three-electrode cell setup. A high specific capacity of up to 105 C g-1 was obtained for the Pbp@NiO-based electrodes with a gravimetric energy density of 17.5 Wh kg-1, a power density of 1925 W kg-1, and excellent stability over 10,000 cycles.
RESUMO
Eco-friendly inhibitors have attracted considerable interest due to the increasing environmental issues caused by the extensive use of hazardous corrosion inhibitors. In this paper, environmentally friendly PDG-g-PANI/Al2O3 composites were prepared by a low-cost inverse emulsion polymerization for corrosion inhibition of mild steel (MS) and stainless steel (SS). The PDG-g-PANI/Al2O3 composites were characterized by different techniques such as X-ray diffraction (XRD), UV/Vis, and FTIR spectroscopy. XRD measurements show that the PDG-g-PANI/Al2O3 composite is mostly amorphous and scanning electron micrographs (SEM) reveal a uniform distribution of Al2O3 on the surface of the PDG-g-PANI matrix. The composite was applied as a corrosion inhibitor on mild steel (MS) and stainless steel (SS), and its efficiency was investigated by potentiodynamic polarization measurement in a 3.5% NaCl and 1 M H2SO4 solution. Corrosion kinetic parameters obtained from Tafel evaluation show that the PDG-g-PANI/Al2O3 composites protect the surface of MS and SS with inhibition efficiencies of 92.3% and 51.9% in 3.5% NaCl solution, which is notably higher than those obtained with untreated epoxy resin (89.3% and 99.5%). In particular, the mixture of epoxy/PDG-g-PANI/Al2O3 shows the best performance with an inhibition efficiency up to 99.9% on MS and SS. An equivalent good inhibition efficiency was obtained for the composite for 1M H2SO4. Analysis of activation energy, formation enthalpy, and entropy values suggest that the epoxy/PDG-g-PANI/Al2O3 coating is thermodynamically favorable for corrosion protection of MS and exhibits long-lasting stability.
RESUMO
Traces of species in batteries are known to impact battery performance. The effects of gas species, although often reported in the electrolyte and evolving during operation, have not been systematically studied to date and are therefore barely understood. This study reveals and compares the effects of different gases on the charge-discharge characteristics, cycling stability and impedances of lithium-ion batteries. All investigated gases have been previously reported in lithium-ion batteries and are thus worth investigating: Ar, CO2 , CO, C2 H4 , C2 H2 , H2 , CH4 and O2 . Gas-electrolyte composition has a significant influence on formation, coulombic and energy efficiencies, C-rate capability, and aging. Particularly, CO2 and O2 showed a higher C-rate capability and a decrease in irreversible capacity loss during the first cycle compared to Ar. Similar discharge capacities and aging behaviors are observed for CO, C2 H4 and CH4 . Acetylene showed a large decrease in performance and cycle stability. Furthermore, electrochemical impedance spectroscopy revealed that the gases mainly contribute to changes in charge transfer processes, whereas the effects on resistance and solid electrolyte interphase performance were minor. Compared to all other gas-electrolyte mixtures, the use of CO2 saturated electrolyte showed a remarkable increase in all performance parameters including lifetime.
RESUMO
Polybenzopyrrole (Pbp) is an emerging candidate for electrochemical energy conversion and storage. There is a need to develop synthesis strategies for this class of polymers that can help improve its overall properties and make it as suitable for energy storage applications as other well-studied polymers in this substance class, such as polyaniline and polypyrrole. In this study, by synthesizing Pbp in surfactant-supported acidic medium, we were able to show that the physicochemical and electrochemical properties of Pbp-based electrodes are strongly influenced by the respective polymerization conditions. Through appropriate optimization of various reaction parameters, a significant enhancement of the thermal stability (up to 549.9 °C) and the electrochemical properties could be achieved. A maximum specific capacitance of 166.0 ± 2.0 F g-1 with an excellent cycle stability of 87% after 5000 cycles at a current density of 1 A g-1 was achieved. In addition, a particularly high-power density of 2.75 kW kg-1 was obtained for this polybenzopyrrole, having a gravimetric energy density of 17 Wh kg-1. The results show that polybenzopyrroles are suitable candidates to compete with other conducting polymers as electrode materials for next-generation Faradaic supercapacitors. In addition, the results of the current study can also be easily applied to other systems and used for adaptations or new syntheses of advanced hybrid/composite Pbp-based electrode materials.
RESUMO
The performance of high-rate supercapacitors requires fine morphological and electrical properties of the electrode. Polyaniline (PANI), as one of the most promising materials for energy storage, shows different behaviour on different substrates. The present study reports on the surface modification of fluorine doped tin oxide (FTO) with the sodium phytate doped PANI without any binder and its utilization as a novel current collector in symmetric supercapacitor devices. The electrochemical behaviour of the sodium phytate doped PANI thin film with and without a binder on fluorine doped tin oxide (FTO) as current collector was investigated by cyclic voltammetry (CV). The electrode without a binder showed higher electrocatalytic efficiency. A symmetrical cell configuration was therefore constructed with the binder-free electrodes. The device showed excellent electrochemical performance with high specific capacities of 550 Fg-1 at 1 Ag-1 and 355 Fg-1 at 40 Ag-1 calculated from galvanostatic discharge curves. The low charge transfer and solution resistances (RCT and RS) of 7.86 Ωcm² and 3.58 × 10-1 Ωcm², respectively, and superior rate capability of 66.9% over a wide current density range of 1 Ag-1 to 40 Ag-1 and excellent cycling stability with 90% of the original capacity over 1000 charge/discharge cycles at 40 Ag-1, indicated it to be an efficient energy storage device. Moreover, the gravimetric energy and power density of the supercapacitor was remarkably high, providing 73.8 Whkg-1 at 500 Wkg-1, respectively. The gravimetric energy density remained stable as the power density increased. It even reached up to 49.4 Whkg-1 at a power density of up to 20 Wkg-1.
RESUMO
The major drawbacks of the conventional methods for preparing polyaniline (PANI) are the large consumptions of toxic chemicals and long process durations. This paper presents a remarkably simple and green route for the chemical oxidative synthesis of PANI nanofibers, utilizing sodium phytate as a novel and environmentally friendly plant derived dopant. The process shows a remarkable reduction in the synthesis time and usage of toxic chemicals with good dispersibility and exceedingly high conductivity up to 10 S cm-1 of the resulting PANI at the same time. A detailed characterization of the PANI samples has been made showing excellent relationships between their structure and properties. Particularly, the electrochemical properties of the synthesized PANI as electrode material for supercapacitors were analyzed. The PANI sample, synthesized at pre-optimized conditions, exhibited impressive supercapacitor performance having a high specific capacitance (Csp) (832.5 Fg-1 and 528 Fg-1 at 1 Ag-1 and 40 Ag-1, respectively) as calculated from galvanostatic charge/discharge (GCD) curves. A good rate capability with a capacitance retention of 67.6% of its initial value was observed. The quite low solution resistance (Rs) value of 281.0 × 10-3 Ohm and charge transfer resistance value (Rct) of 7.44 Ohm represents the excellence of the material. Further, a retention of 95.3% in coulombic efficiency after 1000 charge discharge cycles, without showing any significant degradation of the material, was also exhibited.
RESUMO
In the field of advanced energy storage, nanostructured Polyaniline (PANI) based materials hold a special place. Extensive studies have been done on the application of PANI in supercapacitors, however, the structure-property relationship of these materials is still not understood. This paper presents a detailed characterization of the novel sodium phytate doped 3D PANI nanofibers anchored on different types of carbon paper for application in supercapacitors. An excellent relationship between the structures and properties of the synthesized samples was found. Remarkable energy storage characteristics with low values of solution, charge transfer and polarization resistance and a specific capacitance of 1106.9 ± 1.5 F g-1 and 779 ± 2.6 F g-1 at current density 0.5 and 10 Ag-1, respectively, was achieved at optimized conditions. The symmetric supercapacitor assembly showed significant enhancement in both energy density and power density. It delivered an energy density of 95 Wh kg-1 at a power of 846 W kg-1. At a high-power density of 16.9 kW kg-1, the energy density can still be kept at 13 Wh kg-1. Cyclic stability was also checked for 1000 cycles at a current density of 10 Ag-1 having excellent retention, i.e., 96%.
RESUMO
A highly reactive nickel catalyst comprising NiCl2(dppp) or NiCl2(dppe) with zinc powder, ZnI2 and Ph2PH, was applied in the isomerization of terminal alkenes to Z-2-alkenes. The double-bond geometry of the 2-alkene can be controlled via the reaction temperature to yield the 2-Z-alkenes in excellent yields and high Z-selectivities. The formation of other constitutional isomers, such as 3-alkenes, is suppressed on the basis of the proposed mechanism via a 1,2-hydride shift from the metal to the Ph2P ligand. The nickel-catalyzed isomerization reaction was then applied in the synthesis of (9Z,12Z)-tetradeca-9,12-dienyl acetate, a pheromone with a 2Z,5Z-diene subunit.
RESUMO
Cyclometallated aryl-pyridine gold(iii) complexes are shown to be efficient catalysts for the multicomponent reaction between N-benzyl imines, alkynes, and acyl chlorides to form trisubstituted oxazoles. The reaction typically proceeds in good yields (up to over 80%) and short reaction times (â¼15 minutes). The high stability of the investigated cyclometallated catalysts enables a retained efficiency for this reaction in terms of rate and yield using as little as 0.5 mol% catalyst, a reduction by an order of magnitude compared to previously used Au(iii)-salen complexes. An attractive feature of the present catalytic system is that active catalysts can be formed from simple pre-catalysts under the reaction conditions. Both cyclometallated and non-cyclometallated complexes were characterized in the solid state by single crystal X-ray diffraction.