RESUMO
Growing demand for sustainable wastewater treatment drives interest in advanced photocatalytic materials. Immobilized photocatalysts hold potential for addressing industrial wastewater organic pollutants, offering substantial surface area, agglomeration prevention, and easy removal. In this study, we successfully immobilized ZnO and carbon nanotubes onto a textile substrate through bilateral esterification and explored their effectiveness as a potent photocatalyst for degrading of commercial textile colorant reactive blue 4 (RB-4) colorant. Findings demonstrated significant improvements in photocatalytic performance upon integrating ZnO and CNTs into the fabric, coupled with chitosan immobilization. The immobilization process of ZnO and CNTs onto the substrate was elucidated through a proposed reaction mechanism, while the appearance of carbonyl peaks at 1719.2 cm-1 in the composite fabric further confirmed bilateral esterification. The as-developed immobilized nano-catalyst exhibited remarkable photocatalytic efficiency with an impressive 93.54% color degradation of RB-4. This innovative approach underscores the immense potential of the ternary immobilized (ZnO/fCNT/chitosan) composite fabric for efficient photocatalytic degradation in textile coloration processes. Exploring the early-stage development of immobilized photocatalysts contributes to safer and more eco-friendly practices, addressing pressing environmental challenges effectively.
RESUMO
The present study incorporated an environment-friendly and cost-efficient green synthesis method for fabricating zinc oxide nanoparticles (ZnO-NPs) using various parts (leaves, buds, and flowers) of Bauhinia Variegate Linn. UV-Spectrophotometric analysis was used to confirm the synthesis of ZnO-NPs, which showed an absorption band within 360-380 nm range. Further techniques like FT-IR spectroscopy and (SEM) scanning electron microscopy equipped with a novel EDX were also included to confirm the synthesis, size, and shape of ZnO-NPs. Results obtained by FT-IR showed that the phytochemicals present in the ethanolic extract successfully acted as a capping agent. SEM micrographs confirmed irregularly shaped nanoparticles with an average size of 70-80 nm. The presence of Zinc and Oxygen peaks in EDX also confirmed the successful synthesis of ZnO nanoparticles. The radical scavenging (antioxidant) potential of prepared nanoparticles was also evaluated by DPPH radical assay. The ZnO-NPs obtained from the ethanolic extract of buds showed the highest %RSA (86%) as compared to the flowers (79%) and leaves (76%). The current study findings showed the versatile morphology of all parts of the plant with significant antioxidant potential, establishing the use of Bauhinia Variegate in biological systems for various biomedical applications. RESEARCH HIGHLIGHTS: A thorough comparative analysis of the radical scavenging power of major parts of the Bauhinia Variegate, which is 1st of its kind. Extensive characterization using UV-Vis spectrophotometry, FT-IR, SEM, and EDX to observe the conformational and morphological changes. Analysis of the reduction potential of leaves, buds, and flowers of a single plant for future directions in green synthesis.
Assuntos
Bauhinia , Flores , Sequestradores de Radicais Livres , Extratos Vegetais , Folhas de Planta , Óxido de Zinco , Bauhinia/química , Óxido de Zinco/química , Extratos Vegetais/química , Extratos Vegetais/farmacologia , Folhas de Planta/química , Flores/química , Sequestradores de Radicais Livres/química , Espectroscopia de Infravermelho com Transformada de Fourier , Microscopia Eletrônica de Varredura , Nanopartículas Metálicas/química , Antioxidantes/farmacologia , Antioxidantes/química , EspectrofotometriaRESUMO
The preparation of ethylenediaminetetraacetic acid (EDTA) functionalized pine needles biochar (EDTA@BC) as a low-cost active adsorbent and its effectiveness in removing Ni(II) from aqueous solution at various conditions is reported in this paper. First, alkali activation was selected to render the pine needle biochar with an excellent porous structure and increased concentration of hydroxyl groups to facilitate grafting. Subsequently, a simple method was utilized to graft EDTA onto the biochar. The prepared EDTA@BC was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy dispersive x-ray spectrometry (EDX). Batch adsorption studies were conducted to assess the impact of various parameters such as solution pH, adsorbent dosage, adsorbate volume, and shaking time on the removal efficiency of Ni(II). At pH 6, 100 mg dosage, 4 mL of adsorbate volume, and 10 min of shaking time, the maximum removal efficiency of Ni(II) was observed to be 89%. EDTA@BC showed reasonable sorption performance still after the third cycle of regeneration. The effect of interfering ions such as Pb, Cr, Cu, and Hg was evaluated, resulting a decrease of 69%, 78%, 76%, and 68%, respectively, in its sorption capacity. The Langmuir model provided a better fit for Ni(II) in the concentration range of 0.1-2000 ppm under optimized conditions, with qmax of 46.69 ± 1.031 mg/g and KL of 0.001, compared with the Freundlich isotherm, which yielded n = 0.234 and χ2 = 2.7899, Temkin isotherm (R2 = 0.9520), and Redlich-Peterson isotherm (R2 = 0.9725). The removal of Ni(II) by EDTA@BC was found to be the pseudo-second-order kinetics. Thermodynamic studies indicated adsorption process to be endothermic and nonspontaneous. Hence, a sustainable valorized bio-material (EDTA@BC) is prepared having better sorption efficiency of Ni(II) from aqueous solution with possible wide applicability. RESEARCH HIGHLIGHTS: New EDTA functionalized indigenous pine needles biochar (EDTA@BC) was prepared. This low-cost active adsorbent found effective in removing Ni(II) from aqueous solution. FTIR, SEM, and EDX proved synthesis and uptake of Ni(II) from aqueous solution. Ni(II) removal, regeneration, interfering and adsorption studies were performed by UV-Vis spectroscopy.
RESUMO
The exclusive features of two-dimensional (2D) semiconductors, such as high surface-to-volume ratios, tunable electronic properties, and biocompatibility, provide promising opportunities for developing highly sensitive biosensors. However, developing practical biosensors that can promptly detect low concentrations of target analytes remains a challenging task. Here, a field-effect-transistor comprising n-type transition metal dichalcogenide tin disulfide (SnS2 ) is developed over the hexagonal boron nitride (h-BN) for the detection of streptavidin protein (Strep.) as a target analyte. A self-designed receptor based on the pyrene-lysine conjugated with biotin (PLCB) is utilized to maintain the sensitivity of the SnS2 /h-BN FET because of the π-π stacking. The detection capabilities of SnS2 /h-BN FET are investigated using both Raman spectroscopy and electrical characterizations. The real-time electrical measurements exhibit that the SnS2 /h-BN FET is capable of detecting streptavidin at a remarkably low concentration of 0.5 pm, within 13.2 s. Additionally, the selectivity of the device is investigated by measuring its response against a Cow-like serum egg white protein (BSA), having a comparative molecular weight to that of the streptavidin. These results indicate a high sensitivity and rapid response of SnS2 /h-BN biosensor against the selective proteins, which can have significant implications in several fields including point-of-care diagnostics, drug discovery, and environmental monitoring.
Assuntos
Técnicas Biossensoriais , Transistores Eletrônicos , Animais , Bovinos , Feminino , Estreptavidina , Técnicas Biossensoriais/métodos , Dissulfetos , SemicondutoresRESUMO
The design of oxygen evolution reaction (OER) catalysts with higher stability and activity by economical and convenient methods is considered particularly important for the energy conversion technology. Herein, a simple hydrothermal method was adopted for the synthesis of iodine-doped nickel hydroxide nanoparticles and their OER performance was explored. The electrocatalysts were structurally characterized by powder X-ray diffraction analysis (P-XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), and BET analysis. The electrochemical performance of the electrocatalysts was assessed by cyclic voltammetry, linear sweep voltammetry, and electrochemical impedance spectroscopy. The abundant catalytic active sites, oxygen vacancies, low charge-transfer resistance, and a high pore diameter to pore size ratio of iodine-doped Ni(OH)2 were responsible for its excellent catalytic activity, whereby OER was initiated even at 1.52 V (vs. RHE) and a 330 mV overpotential was needed to reach a 40 mV cm-2 current density in 1 M KOH solution. The material also exhibited a low Tafel slope (46 mV dec-1), which suggests faster charge-transfer kinetics as compared to its counterparts tested under the same electrochemical environment. It is worth noting that this facile and effective approach suggests a new way for the fabrication of metal hydroxides rich in oxygen vacancies, thus with the potential to boost the electrochemical performance of energy-related systems.
RESUMO
The antioxidant capacity of extracts of different parts of Cucurbitaceae vegetables was evaluated by DPPH (2, 2-diphenyl-1-picrylhydrazyl) and ABTS (2, 2'-azino bis (ethyl benzothiazoline 6)-sulphonic acid) methods. Total phenolic content (TPC) and total flavonoid content (TFC) were also determined. The correlation of TPC, TFC, DPPH, and ABTS in different extracts of Cucurbitaceae vegetables was analyzed. The peel extracts of studied vegetables had the highest TPC, (C. grandis 3.00±0.86, T. cucumerina 3.24±0.70 and C. moschata 3.12±0.06 mg gallic acid equivalent (GAE) g-1 DW) and TFC (C. grandis 18.96±1.5, T. cucumerina 13.92±1.41 and C. moschata 15.31±0.97 mg rutin equivalent (RE) g-1 DW). The maximum antioxidant potential was obtained by the ABTS method in peel extracts of C. grandis (78.7%) and C. moschata (63.5%) while in pulp extract of T. cucumerina (50.1%) at 10 µg/mL. The percent radical scavenging activity (% RSA) by the DPPH method found maximum for peel and pulp of C. grandis (45.15 and 45.15%, respectively) and peel of T. cucumerina (45.15%) and C. moschata (34.15%). The EC50 obtained in the ABTS method was 0.54 and 7.15 µg/mL for C. grandis and C. moschata, respectively while 0.81 µg/mL for the pulp of T. cucumerina compared to standard ascorbic acid (1.05 µg/mL). The EC50 calculated in the DPPH method was 11.78 µg/mL, 13.34 µg/mL, and 21.00 µg/mL for C. grandis, T. cucumerina, and C. moschata peel respectively compared to the standard Butylated hydroxytoluene (BHT). Among each variable, the correlation between ABTS and TPC provided the highest positive correlation (r = 0.998, p< 0.05) in peel extracts.
Assuntos
Cucurbitaceae , Verduras , Antioxidantes/química , Flavonoides/farmacologia , Fenóis/química , Extratos Vegetais/química , Extratos Vegetais/farmacologia , Verduras/químicaRESUMO
Van der Waals (vdW) heterostructures composed of atomically thin two-dimensional (2D) materials have more potential than conventional metal-oxide semiconductors because of their tunable bandgaps, and sensitivities. The remarkable features of these amazing vdW heterostructures are leading to multi-functional logic devices, atomically thin photodetectors, and negative differential resistance (NDR) Esaki diodes. Here, an atomically thin vdW stacking composed of p-type black arsenic (b-As) and n-type tin disulfide (n-SnS2 ) to build a type-III (broken gap) heterojunction is introduced, leading to a negative differential resistance device. Charge transport through the NDR device is investigated under electrostatic gating to achieve a high peak-to-valley current ratio (PVCR), which improved from 2.8 to 4.6 when the temperature is lowered from 300 to 100 K. At various applied-biasing voltages, all conceivable tunneling mechanisms that regulate charge transport are elucidated. Furthermore, the real-time response of the NDR device is investigated at various streptavidin concentrations down to 1 pm, operating at a low biasing voltage. Such applications of NDR devices may lead to the development of cutting-edge electrical devices operating at low power that may be employed as biosensors to detect a variety of target DNA (e.g., ct-DNA) and protein (e.g., the spike protein associated with COVID-19).
RESUMO
Lipase was extracted from germinating seeds of Helianthus annus (Sunflower), Zea mays (Maize), and Brassica compastris (Mustard). The lipolytic activity was assessed using olive oil as substrate at different germination-time and the maximum-activity was obtained after 120 hr. Partial-purification was executed by precipitating the seed-homogenate with varying concentration of ammonium sulfate solution. 80% ammonium sulfate solution showed maximum lipase activity of 5320IUml-1 , 3500IUml-1 , 3080IUml-1 with 9.6, 6.9, and 4.8-fold purification and total protein content of 162, 84, and 60 mg for partially purified enzyme extracts namely SN5, BN5, and MN5, respectively. The optimum temperature and pH observed for hydrolysis of olive oil were 37°C, and 8.0 respectively. Enzyme was found to be stable upto 6 days at 4°C and its activity was stimulated by Ca+2 ions. Oil-stains removal from cotton fabric was observed to be superior in the presence of lipase and detergent. Moreover, the SN5, BN5, and MN5 lipase increased free fatty acid release upto 4.2, 4.3, and 3.8 mg, respectively than wastewater without treatment of lipase (0.21 mg) and promoted fat hydrolysis to approximately 40, 42, and 48% mass reduction after 6 hr incubation of fat particle at a concentration of 20 mg/ml. Biodiesel produced by catalyzing transesterification of vegetable oil with SN5, BN5, and MN5 lipase provided an acid value of 0.8, 1.08, and 0.5 mg/g, viscosity 5.50, 5.7, and 5.53 mm2 /s and density 0.87, 0.88, and 0.79 g/ml, respectively. To the best of our knowledge, no such study has been conducted prior on lipase from the seeds mentioned above in Azad Kashmir region.
RESUMO
The development of an effective mechanical to electrical energy conversion device and its functional integration with an energy storage device for self-powered portable gadgets are cutting-edge research fields. However, the generated power and the mechanical stability of these integrated devices are still not efficient to power up portable electronics. We fabricated a rectifier-free piezoelectric nanogenerator (NG) integrated with a supercapacitor (SC). A multifunctional composite matrix was prepared by the incorporation of ultrathin (<10 nm) ZnO nanoflakes and reduced graphene oxide in polyvinylidene fluoride to enhance the piezoelectric output characteristics and mechanical stability of the device while minimizing the additional energy losses during the integration. The as-fabricated SC-based power unit through the energy conversion and storage processes showed a remarkable self-charging performance. We obtained the maximum output voltage, current density, and power density of about 44 V, 1000 nA cm-2, and 193.6 µW cm-2 under the applied mechanical force of 10 N, respectively. The self-charging behavior of the device showed that it can store 1.5 × 10-3 mC within 100 s without resorting to a rectifier. We obtained the total energy density of about 10.34 mW h kg-1 under palm impact. Our results present a step forward in the development of the NG and SC-based flexible and self-charging devices.
RESUMO
Recently, a new class of two-dimensional (2D) materials, called MXene, consisting of layers of transition-metal carbides and nitrides/carbonitrides has been introduced. MXene, a multifunctional material with hydrophilic nature and excellent electrical conductivity and chemical stabilities, can be applied in diverse research areas such as energy harvesting and its storage, water purification, thermal dissipation, and gas sensing. To achieve the best quality of MXene, optimization of some important synthetic parameters is highly required such as an optimized etchant concentration to remove an "A" element from the MAX phase and sonication time for the efficient exfoliation of MXene flakes. Besides, there is a need to disclose that particular solvent through which intercalation can easily be achieved. In this work, we optimized the abovementioned critical parameters for the synthesis of good-quality MXene. Our results clearly explain the variations in the quality of MXene under applied etchant concentrations, solvents for better intercalation, and optimization of sonication time for better exfoliation. The obtained results suggest that 30% HF as an etchant, dimethyl sulfoxide (DMSO) as a solvent, and 135 min as the sonication time are effective parameters for the synthesis of good-quality MXene. We expect that this report will be helpful for the young research community to synthesize good-quality MXene with the required properties.
RESUMO
Desferrioxamine (DFO) and diethylenetriaminepentaacetic acid (DTPA) conjugated with silica gel (IDFOSG and IDTPASG, respectively) were evaluated as adsorbents for chromium in aqueous solutions. Different parameters affecting adsorption such as pH, sorbent dosage, contact time, sample volume and potential of interfering ions have been optimized. The optimum pH for chromium binding was 4 for 100 mg of adsorbents at 5 min of table shaking with 5 mL sample volume of chromium solutions. Langmuir adsorption model described the removal of chromium ions. The adsorption capacity for chromium was 90% for IDFOSG and 83% for IDTPASG in single solutions, and at least 75% in multielemental solutions. Considering the removal efficacy, regeneration and stability, DFO-grafted silica gel was generally superior to its DTPA counterpart and may be applied to the removal of traces of chromium species from natural waters.
Assuntos
Cromo , Poluentes Químicos da Água , Adsorção , Desferroxamina , Concentração de Íons de Hidrogênio , Cinética , Ácido Pentético , Sílica Gel , SoluçõesRESUMO
In this work, a new approach to modifying poly(dimethylsiloxane) (PDMS) as a negative triboelectric material using graphene oxide (GO) and a sodium dodecyl sulfate (SDS) surfactant was reported. A porous PDMS@GO@SDS composite triboelectric nanogenerator (TENG) could deliver an output voltage and current of up to 438 V and 11 µA/cm2, respectively. These values were 3-fold higher than those of the flat PDMS. The superior performance is attributed to the intensified negative charges on PDMS from the oxygen functional groups of GO and anionic head groups of the SDS molecules. The outstanding performance and straightforward, low-cost fabrication process of the PDMS@GO@SDS TENG would be beneficial for the further development of powerful NGs integrated into wearable electronics and self-charging power cells.
RESUMO
We demonstrated a hybrid nanogenerator (NG) exploiting both piezoelectric and triboelectric effects induced from ZnO nanoflakes (NFs)/polydimethylsiloxane (PDMS) composite films through a facile, cost-effective fabrication method. This hybrid NG exhibited not only high piezoelectric output current owing to the enhanced surface piezoelectricity of the ZnO NFs but also high triboelectric output voltage owing to the pronounced triboelectrification of Au-PDMS contact, producing a peak-to-peak output voltage of â¼470 V, a current density of â¼60 µA·cm-2, and an average power density of â¼28.2 mW·cm-2. Without additional energy storage devices, the hybrid NGs with an area of 3 × 3 cm2 instantaneously lit up 180 commercial green light-emitting diodes through periodic hand compression. This approach may provide an innovative design for constructing high-performance and portable energy harvesting devices with enhanced power output, scavenging ambient mechanical energy from human motions in our daily life.