Kinetics of methane hydrate decomposition studied via in situ low temperature X-ray powder diffraction.

Gas hydrate is known to have a slowed decomposition rate at ambient pressure and temperatures below the melting point of ice. As hydrate exothermically decomposes, gas is released and water of the clathrate cages transforms into ice. Based on results from the decomposition of three nominally similar methane hydrate samples, the kinetics of two regions, 180-200 and 230-260 K, within the overall decomposition range 140-260 K, were studied by in situ low temperature X-ray powder diffraction. The kinetic rate constants, k(a), and the reaction mechanisms, n, for ice formation from methane hydrate were determined by the Avrami model within each region, and activation energies, E(a), were determined by the Arrhenius plot. E(a) determined from the data for 180-200 K was 42 kJ/mol and for 230-260 K was 22 kJ/mol. The higher E(a) in the colder temperature range was attributed to a difference in the microstructure of ice between the two regions.

Scalable economic extracellular synthesis of CdS nanostructured particles by a non-pathogenic thermophile.

We report microbially facilitated synthesis of cadmium sulfide (CdS) nanostructured particles (NP) using anaerobic, metal-reducing Thermoanaerobacter sp. The extracellular CdS crystallites were <10 nm in size with yields of ~3 g/L of growth medium/month with demonstrated reproducibility and scalability up to 24 L. During synthesis, Thermoanaerobacter cultures reduced thiosulfate and sulfite salts to H2S, which reacted with Cd²âº cations to produce thermodynamically favored NP in a single step at 65 °C with catalytic nucleation on the cell surfaces. Photoluminescence (PL) analysis of dry CdS NP revealed an exciton-dominated PL peak at 440 nm, having a narrow full width at half maximum of 10 nm. A PL spectrum of CdS NP produced by dissimilatory sulfur reducing bacteria was dominated by features associated with radiative exciton relaxation at the surface. High reproducibility of CdS NP PL features important for scale-up conditions was confirmed from test tubes to 24 L batches at a small fraction of the manufacturing cost associated with conventional inorganic NP production processes.

Local structure and distortions of mixed methane-carbon dioxide hydrates.

A vast source of methane is found in gas hydrate deposits, which form naturally dispersed throughout ocean sediments and arctic permafrost. Methane may be obtained from hydrates by exchange with hydrocarbon byproduct carbon dioxide. It is imperative for the development of safe methane extraction and carbon dioxide sequestration to understand how methane and carbon dioxide co-occupy the same hydrate structure. Pair distribution functions (PDFs) provide atomic-scale structural insight into intermolecular interactions in methane and carbon dioxide hydrates. We present experimental neutron PDFs of methane, carbon dioxide and mixed methane-carbon dioxide hydrates at 10 K analyzed with complementing classical molecular dynamics simulations and Reverse Monte Carlo fitting. Mixed hydrate, which forms during the exchange process, is more locally disordered than methane or carbon dioxide hydrates. The behavior of mixed gas species cannot be interpolated from properties of pure compounds, and PDF measurements provide important understanding of how the guest composition impacts overall order in the hydrate structure.

Crystallite sizes and lattice parameters of nano-biomagnetite particles.

Average crystallite sizes of microbially synthesized pure, metal-, and lanthanide-substituted magnetite (bio-magnetite) were determined for a variety of incubation times and temperatures, substitutional elements and amounts, bacterial species, and precursor types. The intriguing difference between nanoparticle bio-magnetite and chemically synthesized magnetite (chem-magnetite) was that powder X-ray diffraction (XRD) data showed that the bio-magnetite exhibited slightly smaller lattice parameters, however, Raman Spectroscopy exhibited no difference in Fe-O bonding. These results indicate that bio-magnetite likely exhibits a more compact crystal structure with less uncoordinated iron on the surface suppressing negative pressure effects. The bio-magnetite with decreased lattice parameters could have potential technological advantages over current commercial chemically synthesized magnetites.

Large-scale production of magnetic nanoparticles using bacterial fermentation.

Production of both nano-sized particles of crystalline pure phase magnetite and magnetite substituted with Co, Ni, Cr, Mn, Zn or the rare earths for some of the Fe has been demonstrated using microbial processes. This microbial production of magnetic nanoparticles can be achieved in large quantities and at low cost. In these experiments, over 1 kg (wet weight) of Zn-substituted magnetite (nominal composition of Zn(0.6)Fe(2.4)O4) was recovered from 30 l fermentations. Transmission electron microscopy (TEM) was used to confirm that the extracellular magnetites exhibited good mono-dispersity. TEM results also showed a highly reproducible particle size and corroborated average crystallite size (ACS) of 13.1 ± 0.8 nm determined through X-ray diffraction (N = 7) at a 99% confidence level. Based on scale-up experiments performed using a 35-l reactor, the increase in ACS reproducibility may be attributed to a combination of factors including an increase of electron donor input, availability of divalent substitution metal ions and fewer ferrous ions in the case of substituted magnetite, and increased reactor volume overcoming differences in each batch. Commercial nanometer sized magnetite (25-50 nm) may cost $500/kg. However, microbial processes are potentially capable of producing 5-90 nm pure or substituted magnetites at a fraction of the cost of traditional chemical synthesis. While there are numerous approaches for the synthesis of nanoparticles, bacterial fermentation of magnetite or metal-substituted magnetite may represent an advantageous manufacturing technology with respect to yield, reproducibility and scalable synthesis with low costs at low energy input.

Synthesis and structural characterization of Ca12Ga14O33.

Ca12Ga14O33 was successfully synthesized using a wet chemistry technique to promote the homogenous mixing of the Ca and Ga cations. Rietveld refinements on X-ray and neutron powder diffraction data confirm that the compound is isostructural to Ca12Al14O33, however, with a significantly larger lattice parameter allowing for the cages that result from the framework arrangement to expand. In naturally occurring Ca12Al14O33, the mineral mayenite, these cages are occupied by O2- anions, however, experimental studies exchanging the O2- anions with other anions has led to a host of applications, depending on the caged anion. The functional nature of the structure, where framework distortions coupled with cage occupants, are correlated to electronic band structure and modifications to the framework could lead to interesting physical properties. The phase evolution was tracked using thermogravimetric analysis and high temperature X-ray diffraction and showed a lower formation temperature for the Ca12Ga14O33 analogue compared to Ca12Al14O33 synthesized using the same wet chemistry technique. Analyzing both X-ray and neutron powder diffraction using the Rietveld method with two different starting models results in one structural model, with one Ca position and the caged O on a 24d special position, being preferred.

Biomimetic synthesis of calcium-deficient hydroxyapatite in a natural hydrogel.

A novel composite material consisting of calcium-deficient hydroxyapatite (CdHAP) biomimetically deposited in a bacterial cellulose hydrogel was synthesized and characterized. Cellulose produced by Gluconacetobacter hansenii was purified and sequentially incubated in solutions of calcium chloride followed by sodium phosphate dibasic. A substantial amount of apatite (50-90% of total dry weight) was homogeneously incorporated throughout the hydrogel after this treatment. X-ray diffractometry (XRD) showed that CdHAP crystallites had formed in the cellulose. XRD further demonstrated that the CdHAP was comprised of 10-50 nm anisotropic crystallites elongated in the c-axis, similar to natural bone apatite. Fourier transform infrared (FTIR) spectroscopy demonstrated that hydroxyl IR bands of the cellulose shifted to lower wave numbers indicating that a coordinate bond had possibly formed between the CdHAP and the cellulose hydroxyl groups. FTIR also suggested that the CdHAP had formed from an octacalcium phosphate precursor similar to physiological bone. Scanning electron microscopy (SEM) images confirmed that uniform approximately 1 microm spherical CdHAP particles comprised of nanosized crystallites with a lamellar morphology had formed in the cellulose. The synthesis of the composite mimics the natural biomineralization of bone indicating that bacterial cellulose can be used as a template for biomimetic apatite formation. This composite may have potential use as an orthopedic biomaterial.

Microbial formation of lanthanide-substituted magnetites by Thermoanaerobacter sp. TOR-39.

The potentially toxic effects of soluble lanthanide (L) ions, although microbially induced mineralization can facilitate the formation of tractable materials, has been one factor preventing the more widespread use of L-ions in biotechnology. Here, we propose a new mixed-L precursor method as compared to the traditional direct addition technique. L (Nd, Gd, Tb, Ho and Er)-substituted magnetites, L( y )Fe(3 - y )O(4) were microbially produced using L-mixed precursors, L( x )Fe(1 - x )OOH, where x = 0.01-0.2. By combining lanthanides into the akaganeite precursor phase, we were able to mitigate some of the toxicity, enabling the microbial formation of L-substituted magnetites using a metal reducing bacterium, Thermoanaerobacter sp. TOR-39. The employment of L-mixed precursors enabled the microbial formation of L-substituted magnetite, nominal composition up to L(0.06)Fe(2.94)O(4), with at least tenfold higher L-concentration than could be obtained when the lanthanides were added as soluble salts. This mixed-precursor method can be used to extend the application of microbially produced L-substituted magnetite, while also mitigating their toxicity.