Topology of the selectivity filter of a TRPV channel: rapid accessibility of contiguous residues from the external medium.

The transient receptor potential type V5 (TRPV5) channel is a six-transmembrane domain ion channel that is highly selective to Ca(2+). To study the topology of the selectivity filter using the substituted cysteine accessibility method (SCAM), cysteine mutants at positions 541-547 were studied as heterotetramers using dimeric constructs that couple the control channel in tandem with a cysteine-bearing subunit. Whole cell currents of dimeric constructs D542C, G543C, P544C, A545C, and Y547C were rapidly inhibited by positively charged 2-(trimethyl ammonium)methyl methane thiosulfonate bromide (MTSMT), 2-(aminoethyl)methane thiosulfonate bromide (MTSEA), and 2-(trimethyl ammonium)ethyl methane thiosulfonate bromide (MTSET) reagents, whereas D542C, P544C, and A545C were inhibited only by negatively charged sodium 2-(sulfonatoethyl)methane thiosulfonate (MTSES). In contrast, the I541C dimer remained insensitive to positive and negative reagents. However, I541C/D542G and I541C/D542N dimeric constructs were rapidly (<30 s) and strongly inhibited by positively and negatively charged methane thiosulfonate reagents, suggesting that removing two of the four carboxylate residues at position 542 disrupts a constriction point in the selectivity filter. Taken together, these results establish that the side chains of contiguous amino acids in the selectivity filter of TRPV5 are rapidly accessible from the external medium, in contrast to the three-dimensional structure of the selectivity filter in K(+) channels, where main chain carbonyls were shown to project toward a narrow permeation pathway. The I541C data further suggest that the selectivity filter of the TRPV5 channel espouses a specific conformation that restrains accessibility in the presence of four carboxylate residues at position 542.

The role of distal S6 hydrophobic residues in the voltage-dependent gating of CaV2.3 channels.

The hydrophobic locus VAVIM is conserved in the S6 transmembrane segment of domain IV (IVS6) in Ca(V)1 and Ca(V)2 families. Herein we show that glycine substitution of the VAVIM motif in Ca(V)2.3 produced whole cell currents with inactivation kinetics that were either slower (A1719G approximately V1720G), similar (V1718G), or faster (I1721G approximately M1722G) than the wild-type channel. The fast kinetics of I1721G were observed with a approximately +10 mV shift in its voltage dependence of activation (E(0.5,act)). In contrast, the slow kinetics of A1719G and V1720G were accompanied by a significant shift of approximately -20 mV in their E(0.5,act) indicating that the relative stability of the channel closed state was decreased in these mutants. Glycine scan performed with Val (349) in IS6, Ile(701) in IIS6, and Leu(1420) in IIIS6 at positions predicted to face Val(1720) in IVS6 also produced slow inactivating currents with hyperpolarizing shifts in the activation and inactivation potentials, again pointing out a decrease in the stability of the channel closed state. Mutations to other hydrophobic residues at these positions nearly restored the channel gating. Altogether these data indicate that residues at positions equivalent to 1720 exert a critical control upon the relative stability of the channel closed and open states and more specifically, that hydrophobic residues at these positions promote the channel closed state. We discuss a three-dimensional homology model of Ca(V)2.3 based upon Kv1.2 where hydrophobic residues at positions facing Val(1720) in IS6, IIS6, and IIIS6 play a critical role in stabilizing the closed state in Ca(V)2.3.

The role of the GX9GX3G motif in the gating of high voltage-activated Ca2+ channels.

The putative hinge point revealed by the crystal structure of the MthK potassium channel is a glycine residue that is conserved in many ion channels. In high voltage-activated (HVA) Ca(V) channels, the mid-S6 glycine residue is only present in IS6 and IIS6, corresponding to G422 and G770 in Ca(V)1.2. Two additional glycine residues are found in the distal portion of IS6 (Gly(432) and Gly(436) in Ca(V)1.2) to form a triglycine motif unique to HVA Ca(V) channels. Lethal arrhythmias are associated with mutations of glycine residues in the human L-type Ca(2+) channel. Hence, we undertook a mutational analysis to investigate the role of S6 glycine residues in channel gating. In Ca(V)1.2, alpha-helix-breaking proline mutants (G422P and G432P) as well as the double G422A/G432A channel did not produce functional channels. The macroscopic inactivation kinetics were significantly decreased with Ca(V)1.2 wild type > G770A > G422A congruent with G436A >> G432A (from the fastest to the slowest). Mutations at position Gly(432) produced mostly nonfunctional mutants. Macroscopic inactivation kinetics were markedly reduced by mutations of Gly(436) to Ala, Pro, Tyr, Glu, Arg, His, Lys, or Asp residues with stronger effects obtained with charged and polar residues. Mutations within the distal GX(3)G residues blunted Ca(2+)-dependent inactivation kinetics and prevented the increased voltage-dependent inactivation kinetics brought by positively charged residues in the I-II linker. In Ca(V)2.3, mutation of the distal glycine Gly(352) impacted significantly on the inactivation gating. Altogether, these data highlight the role of the GX(3)G motif in the voltage-dependent activation and inactivation gating of HVA Ca(V) channels with the distal glycine residue being mostly involved in the inactivation gating.

The C-terminal residues in the alpha-interacting domain (AID) helix anchor CaV beta subunit interaction and modulation of CaV2.3 channels.

The alpha-interacting domain (AID) in the I-II linker of high voltage-activated (HVA) Ca(2+) channel alpha1 subunits binds with high affinity to Ca(V)beta auxiliary subunits. The recently solved crystal structures of the AID-Ca(V)beta complex in Ca(V)1.1/1.2 have revealed that this interaction occurs through a set of six mostly invariant residues Glu/Asp(6), Leu(7), Gly(9), Tyr(10), Trp(13), and Ile(14) (where the superscript refers to the position of the residue starting with the QQ signature doublet) distributed among three alpha-helical turns in the proximal section of the I-II linker. We show herein that alanine mutations of N-terminal AID residues Gln(1), Gln(2), Ile(3), Glu(4), Glu(6), Leu(7), and Gly(9) in Ca(V)2.3 did not abolish [(35)S]Ca(V)beta 1b or [(35)S]Ca(V)beta 3 subunit overlay binding to fusion proteins nor did they prevent the typical modulation of whole cell currents by Ca(V)beta 3. Mutations of the invariant Tyr(10) with either hydrophobic (Ala), aromatic (Phe), or positively charged (Arg, Lys) residues yielded Ca(V)beta 3-responsive whole cell currents, whereas mutations with negatively charged residues (Asp, Glu) disrupted Ca(V)beta 3 binding and modulation. In contrast, modulation and binding by Ca(V)beta 3 was significantly weakened in I14A (neutral and hydrophobic) and I14S (neutral and polar) mutants and eradicated in negatively charged I14D and I14E or positively charged I14R and I14K mutants. Ca(V)beta 3-induced modulation was only preserved with the conserved I14L mutation. Molecular replacement analyses carried out using a three-dimensional homology model of the AID helix from Ca(V)2.3 suggests that a high degree of hydrophobicity and a restrained binding pocket could account for the strict structural specificity of the interaction site found at position Ile(14). Altogether these results indicate that the C-terminal residues Trp(13) (1) and Ile(14) anchor Ca(V)beta subunit functional modulation of HVA Ca(2+) channels.

Negatively charged residues in the N-terminal of the AID helix confer slow voltage dependent inactivation gating to CaV1.2.

The E462R mutation in the fifth position of the AID (alpha1 subunit interaction domain) region in the I-II linker is known to significantly accelerate voltage-dependent inactivation (VDI) kinetics of the L-type CaV1.2 channel, suggesting that the AID region could participate in a hinged-lid type inactivation mechanism in these channels. The recently solved crystal structures of the AID-CaVbeta regions in L-type CaV1.1 and CaV1.2 channels have shown that in addition to E462, positions occupied by Q458, Q459, E461, K465, L468, D469, and T472 in the rabbit CaV1.2 channel could also potentially contribute to a hinged-lid type mechanism. A mutational analysis of these residues shows that Q458A, Q459A, K465N, L468R, D469A, and T472D did not significantly alter VDI gating. In contrast, mutations of the negatively charged E461, E462, and D463 to neutral or positively charged residues increased VDI gating, suggesting that the cluster of negatively charged residues in the N-terminal end of the AID helix could account for the slower VDI kinetics of CaV1.2. A mutational analysis at position 462 (R, K, A, G, D, N, Q) further confirmed that E462R yielded faster VDI kinetics at +10 mV than any other residue with E462R >> E462K approximately E462A > E462N > wild-type approximately E462Q approximately E462G > E462D (from the fastest to the slowest). E462R was also found to increase the VDI gating of the slow CEEE chimera that includes the I-II linker from CaV1.2 into a CaV2.3 background. The fast VDI kinetics of the CaV1.2 E462R and the CEEE + E462R mutants were abolished by the CaVbeta2a subunit and reinstated when using the nonpalmitoylated form of CaVbeta2a C3S + C4S (CaVbeta2a CS), confirming that CaVbeta2a and E462R modulate VDI through a common pathway, albeit in opposite directions. Altogether, these results highlight the unique role of E461, E462, and D463 in the I-II linker in the VDI gating of high-voltage activated CaV1.2 channels.