Advanced Microspatially Offset Raman Spectroscopy for Noninvasive Imaging of Concealed Texts and Figures Using Raman Signal, Fluorescence Emission, and Overall Spectral Intensity.

This study explores the possibility of using microspatially offset Raman spectroscopy (micro-SORS) imaging to reconstruct noninvasively letters and figures hidden by opaque layers. Micro-SORS experiments were conducted on mockup samples that mimic real situations encountered in the cultural heritage field, such as sealed letters with inaccessible text and original documents. Subsurface images were obtained using both the characteristic Raman bands of the hidden compounds and their different optical properties from the remaining matrix. In the latter case, contrast obtained through observing a difference in the overall spectral intensity and fluorescence profile rather than any specific Raman bands were used to track the images within the hidden layer. This approach opens new prospects for the use of micro-SORS in heritage science, with applications in the field that include the study of objects covered by opaque overlayers not only through their Raman signatures but also through differences in their optical properties (e.g., fluorescence emission, absorption).

Synchrotron radiation X-ray diffraction computed tomography (XRDCT): a new tool in cultural heritage and stone conservation for 3D non-destructive probing and phase analysis of inorganic re-treatments.

The issue of preserving carbonatic stones of cultural heritage (CH) restored in the past that have undergone new decay phenomena is strongly emerging and conservation science has not yet found a reliable solution. In this paper, we propose the application of synchrotron radiation X-ray diffraction computed tomography (XRDCT) to explore the effects of using inorganic-mineral products (ammonium oxalate; ammonium phosphate) in sequence as a novel, compatible and effective re-treatment approach to consolidate decayed carbonatic stones already treated with inorganic-mineral treatments. High-quality XRDCT datasets were used to qualitatively/quantitatively investigate and 3D localize the complex mixture of crystalline phases formed after the conservation re-treatments within a porous carbonatic stone substrate. The XRDCT reconstruction images and the structural refinements of XRD patterns with the Rietveld methods showed that the phase composition of reaction products, their volume distribution, and weight fraction vary as a function of the treatment sequence and penetration depth. The high potential of XRDCT allows (i) assessment of peculiar trends of each treatment/treatment sequence; (ii) exploration of the reaction steps of the sequential treatments and (iii) demonstration of the consolidating effect of inorganic re-treatments, non-destructively and at the micron scale. Above all, our study (i) provides new analytical tools to support the conservation choices, (ii) showcases new analytical possibilities for XRDCT in conservation science, including in investigations of CH materials and decay processes, and (iii) opens up new perspectives in analytical chemistry and material characterisation for the non-destructive and non-invasive analysis of reactions within heterogeneous polycrystalline systems.

Non-destructive Monitoring of Dye Depth Profile in Mesoporous TiO2 Electrodes of Solar Cells with Micro-SORS.

The dye distribution within a photo-electrode is a key parameter in determining the performances of dye-sensitized photon-to-electron conversion devices, such as dye-sensitized solar cells (DSSCs). A traditional, depth profiling investigation by destructive means including cross-sectional sampling is unsuitable for large quality control applications in manufacturing processes. Therefore, a non-destructive monitoring of the dye depth profile is required, which is the first step toward a non-destructive evaluation of the internal degradation of the device in the field. Here, we present a conceptual demonstration of the ability to monitor the dye depth profile within the light active layer of DSSCs by non-destructive means with high chemical specificity using a recently developed non-destructive/non-invasive Raman method, micro-spatially offset Raman spectroscopy (micro-SORS). Micro-SORS is able to probe through turbid materials, providing the molecular identification of compounds located under the surface, without the need of resorting to a cross-sectional analysis. The study was performed on the photo-electrode of DSSCs. This represents the first demonstration of the micro-SORS concept in the solar cell area as well as, more generally, the application of micro-SORS to the thinnest layer to date. A sample set has been prepared with varying concentrations of the dye and the thickness of the matrix consisting of a titanium dioxide layer. The results showed that micro-SORS can unequivocally discriminate between the homogeneous and inhomogeneous dye depth profiles. Moreover, micro-SORS outcomes have been compared with the results obtained with destructive time-of-flight secondary ion mass spectrometry measurements. The results of the two techniques are in good agreement, confirming the reliability of micro-SORS analysis. Therefore, this study is expected to pave the way for establishing a wider and more effective monitoring capability in this important field.

Time-Resolved ATR-FTIR Spectroscopy and Macro ATR-FTIR Spectroscopic Imaging of Inorganic Treatments for Stone Conservation.

In this study, the novel application of ATR-FTIR spectroscopy and macro ATR-FTIR spectroscopic imaging overcame an analytical challenge in conservation science: the time-resolved, chemical, and spatial investigation of the reaction of inorganic treatments for stone conservation (ammonium oxalate, AmOx; ammonium phosphate, DAP) occurring in water-based solutions. The aim was to (1) assess the composition and localization of reaction products and their phase variation during the reaction in real time and directly in an aqueous environment and (2) investigate the reaction of AmOx and DAP with calcite and the transformations induced to the substrate with a time-resolved approach. The new analytical results showed that for both treatments, the formation of new crystalline phases initiated at the early stages of the reaction. Their composition changed during the treatment and led to more stable phases. The reactivity of the stone substrate to the treatments varied as a function of the stone material features, such as the specific surface area. A clear influence of post-treatment rinsing on the final composition of reaction phases was observed. Above all, our research demonstrates the actual feasibility, practicality, and high potential of an advanced ATR-FTIR spectroscopic approach to investigate the behavior of conservation treatments and provided new analytical tools to address the choices of conservation in pilot worksites. Lastly, this study opens novel analytical perspectives based on the new possible applications of ATR-FTIR spectroscopic imaging in the field of conservation science, materials science, and analytical chemistry.

Insight into the effects of moisture and layer build-up on the formation of lead soaps using micro-ATR-FTIR spectroscopic imaging of complex painted stratigraphies.

Metal soaps are formed in paint layers thorough the reaction of metal ions of pigments and fatty acids of organic binders. In this study, micro-ATR-FTIR spectroscopic imaging was used to analyse the formation of lead soaps in oil-based paint layers in relation to their exposure to moisture sources. The investigations were carried out on authentic samples of complex stratigraphies from cold painted terracotta statues (Sacred Mount, Varallo, UNESCO) and different IR-active lead white pigments, organic materials, and lead soaps were discriminated. The saponification of selected paint layers was correlated to the conservation history, the manufacturing technique, and the build-up of layers. The presence of hydrophilic layers within the stratigraphy and their role as a further water source are discussed. Furthermore, the modifications experienced by lead-based pigments from the core of an intact grain of pigment towards the newly formed decay phases were investigated via a novel approach based on shift of the peak for the corresponding spectral bands and their integrated absorbance in the ATR-FTIR spectra. Qualitative information on the spatial distribution from the chemical images was combined with quantitative information on the peak shift to evaluate the different manufacture (lead carbonate, basic lead carbonate) or the extent of decay undergone by the lead-based pigments as a function of their grain size, contiguous layers, and moisture source. Similar results, having a high impact on heritage science and analytical chemistry, allow developing up-to-date conservation strategies by connecting an advanced knowledge of the materials to the social and conservation history of artefacts.

What's underneath? A non-destructive depth profile of painted stratigraphies by synchrotron grazing incidence X-ray diffraction.

Many works of art are complex systems consisting of a core completed by the overlapping of several painted layers. In this work, we apply an innovative method based on grazing incidence X-ray diffraction (GIXRD) with synchrotron radiation (SR) to investigate polychrome stratigraphies with a completely non-destructive approach. The SR-GIXRD measurements provided direct and unambiguous compositional and stratigraphic information of the crystalline species lying in different layers. The investigations performed on a small fragment sampled from a painted terracotta statue allowed the identification of pigments, fillers, aggregates of the matrix and newly formed decay salts in micrometric-thin paint layers. Furthermore, the great potentiality of this study is the feasibility of depth profile investigations on multi-layered painted samples from cultural heritage objects without resorting to cross sectional analyses. Currently, the method is non-destructive but it can be potentially non-invasive in situations where small moveable artworks can be placed into the measurement chamber of the SR-XRD beamlines. The overall study paves the way to a new scenario of artwork investigations, shedding light on new unexplored approaches for non-destructive studies of cultural heritage objects, their conservation history and their interaction with the environment.

Discovering Hidden Painted Images: Subsurface Imaging Using Microscale Spatially Offset Raman Spectroscopy.

We demonstrate for the first time the mapping capability of micro-spatially offset Raman spectroscopy (micro-SORS). The technique enables to form noninvasive images of thin sublayers through highly turbid overlayers. The approach is conceptually demonstrated on recovering overpainted images in situations where conventional Raman microscopy was unable to visualize the sublayer. The specimens mimic real situations encountered in Cultural Heritage that deal, for example, with hidden paintings vandalized with graffiti or covered by superimposed painted layers or whitewash. Additionally, using a letter as a hidden image, we demonstrated the micro-SORS potential to reconstruct also a hidden writing covered, for example, with paper sheets that cannot be easily removed. Potential applications could also include other disciplines such as polymers, biological, catalytic, and forensic sciences where thin, highly turbid layers mask chemically distinct subsurface structures.

Investigation of Heterogeneous Painted Systems by Micro-Spatially Offset Raman Spectroscopy.

A recently developed technique of Micro-Spatially Offset Raman Spectroscopy (micro-SORS) extends the applicability of Raman spectroscopy to probing thin, highly diffusely scattering layers such as stratified paint samples, enabling their nondestructive chemical characterization. The technique has a wide applicability across areas such as cultural heritage, polymer research, forensics, and biological fields; however, currently, it suffers from a major unaddressed issue related to its ineffectiveness with highly heterogeneous samples. In this paper, we address this unmet need while demonstrating an effective strategy to probe such samples, involving a mapping on scales substantially larger than the scale of heterogeneity. This approach provides an effective means of obtaining robust and representative micro-SORS datasets from which sample composition can be effectively deduced, even in these extreme scenarios. The approach is compared with a basic point collection approach on two-layer paint systems where different layers-top, bottom, or both-are heterogeneous. The study has particular relevance to cultural heritage, where heterogeneous layers are often encountered with painted stratigraphies.

Development of a Fiber-Optics Microspatially Offset Raman Spectroscopy Sensor for Probing Layered Materials.

Microspatially offset Raman spectroscopy (micro-SORS) has been proposed as a valuable approach to sample molecular information from layers that are covered by a turbid (nontransparent) layer. However, when large magnifications are involved, the approach is not straightforward, as spatial constraints exist to position the laser beam and the objective lens with the external beam delivery or, with internal beam delivery, the maximum spatial offset achievable is restricted. To overcome these limitations, we propose here a prototype of a new micro-SORS sensor, which uses bare glass fibers to transfer the laser radiation to the sample and to collect the Raman signal from a spatially offset zone to the Raman spectrometer. The concept also renders itself amenable to remote delivery and to the miniaturization of the probe head which could be beneficial for special applications, e.g., where access to sample areas is restricted. The basic applicability of this approach was demonstrated by studying several layered structure systems. Apart from proving the feasibility of the technique, also, practical aspects of the use of the prototype sensor are discussed.

Development of a full micro-scale spatially offset Raman spectroscopy prototype as a portable analytical tool.

We present, for the first time, a portable full micro-Spatially Offset Raman Spectroscopy (micro-SORS) prototype permitting the in situ analysis of thin, highly turbid stratified layers at depths not accessible to conventional Raman microscopy. The technique is suitable for the characterisation of painted layers in panels, canvases and mural paintings, painted statues and decorated objects in cultural heritage or stratified polymers, and biological, catalytic and forensics samples where invasive analysis is undesirable or impossible to perform. The new device is characterised conceptually in polymer and paint layer systems. The provision of portability with full micro-SORS delivers subsurface micro-SORS capability unlocking the non-invasive and non-destructive potential of micro-SORS at its most effective form permitting it to be applied to large and non-portable objects in situ without recourse to removing micro-fragments for laboratory analysis on benchtop Raman microscopes.

Development of neutron imaging quantitative data treatment to assess conservation products in cultural heritage.

Distribution, penetration depth and amount of new mineralogical phases formed after the interaction between an inorganic treatment and a matrix are key factors for the evaluation of the conservation treatment behaviour. Nowadays, the conventional analytical methodologies, such as vibrational spectroscopies, scanning electron microscopy and X-ray diffraction, provide only qualitative and spot information. Here, we report, for the first time, the proof of concept of a methodology based on neutron imaging able to achieve quantitative data useful to assess the formation of calcium oxalate in a porous carbonatic stone treated with ammonium oxalate. Starting from the neutron attenuation coefficient of Noto stone-treated specimens, the concentrations of newly formed calcium oxalate and the diffusion coefficient have been calculated for both sound and decayed substrates. These outcomes have been also used for a comparative study between different treatment modalities. Graphical abstract Horizontal slice at 300 mm depth and CaOx molar density profile by NEUTRA output.

Development of portable defocusing micro-scale spatially offset Raman spectroscopy.

We present, for the first time, portable defocusing micro-Spatially Offset Raman Spectroscopy (micro-SORS). Micro-SORS is a concept permitting the analysis of thin, highly turbid stratified layers beyond the reach of conventional Raman microscopy. The technique is applicable to the analysis of painted layers in cultural heritage (panels, canvases and mural paintings, painted statues and decorated objects in general) as well as in many other areas including polymer, biological and biomedical applications, catalytic and forensics sciences where highly turbid stratified layers are present and where invasive analysis is undesirable or impossible. So far the technique has been demonstrated only on benchtop Raman microscopes precluding the non-invasive analysis of larger samples and samples in situ. The new set-up is characterised conceptually on a range of artificially assembled two-layer systems demonstrating its benefits and performance across several application areas. These included stratified polymer sample, pharmaceutical tablet and layered paint samples. The same samples were also analysed by a high performance (non-portable) benchtop Raman microscope to provide benchmarking against our earlier research. The realisation of the vision of delivering portability to micro-SORS has a transformative potential spanning across multiple disciplines as it fully unlocks, for the first time, the non-invasive and non-destructive aspects of micro-SORS enabling it to be applied also to large and non-portable samples in situ without recourse to removing samples, or their fragments, for laboratory analysis on benchtop Raman microscopes.

Fluorescence suppression using micro-scale spatially offset Raman spectroscopy.

We present a new concept of fluorescence suppression in Raman microscopy based on micro-spatially offset Raman spectroscopy which is applicable to thin stratified turbid (diffusely scattering) matrices permitting the retrieval of the Raman signals of sublayers below intensely fluorescing turbid over-layers. The method is demonstrated to yield good quality Raman spectra with dramatically suppressed fluorescence backgrounds enabling the retrieval of Raman sublayer signals even in situations where conventional Raman microscopy spectra are fully overwhelmed by intense fluorescence. The concept performance was studied theoretically using Monte Carlo simulations indicating the potential of up to an order or two of magnitude suppression of overlayer fluorescence backgrounds relative to the Raman sublayer signals. The technique applicability was conceptually demonstrated on layered samples involving paints, polymers and stones yielding fluorescence suppression factors between 12 to above 430. The technique has potential applications in a number of analytical areas including cultural heritage, archaeology, polymers, food, pharmaceutical, biological, biomedical, forensics and catalytic sciences and quality control in manufacture.

Portable Sequentially Shifted Excitation Raman spectroscopy as an innovative tool for in situ chemical interrogation of painted surfaces.

We present the first validation and application of portable Sequentially Shifted Excitation (SSE) Raman spectroscopy for the survey of painted layers in art. The method enables the acquisition of shifted Raman spectra and the recovery of the spectral data through the application of a suitable reconstruction algorithm. The technique has a great potentiality in art where commonly a strong fluorescence obscures the Raman signal of the target, especially when conventional portable Raman spectrometers are used for in situ analyses. Firstly, the analytical capability of portable SSE Raman spectroscopy is critically discussed using reference materials and laboratory specimens, comparing its results with other conventional high performance laboratory instruments (benchtop FT-Raman and dispersive Raman spectrometers with an external fiber optic probe); secondly, it is applied directly in situ to study the complex polychromy of Italian prestigious terracotta sculptures of the 16(th) century. Portable SSE Raman spectroscopy represents a new investigation modality in art, expanding the portfolio of non-invasive, chemically specific analytical tools.

Noninvasive analysis of thin turbid layers using microscale spatially offset Raman spectroscopy.

Here, we demonstrate, for the first time, the extension of applicability of recently developed microscale spatially offset Raman spectroscopy (SORS), micro-SORS, from the area of cultural heritage to a wider range of analytical problems involving thin, tens of micrometers thick diffusely scattering turbid layers. The method can be applied in situations where a high turbidity of layers prevents the deployment of conventional confocal Raman microscopy with its depth resolving capability. The method was applied successfully to detect noninvasively the presence of thin, highly turbid layers within polymers, wheat seeds, and paper. An invasive, cross sectional analysis confirmed the micro-SORS findings. Micro-SORS represents a new Raman imaging modality expanding the portfolio of noninvasive, chemically specific analytical tools.

Portable Raman versus portable mid-FTIR reflectance instruments to monitor synthetic treatments used for the conservation of monument surfaces.

This study aims to evaluate the relevance of portable Raman and portable mid-Fourier transform infrared (FTIR) reflectance instruments in monitoring the synthetic treatments applied on plaster substrates, a crucial issue in a conservation work. Some polymeric consolidants and protectives have a relatively short life owing to their degradation, and after some years the surface should be retreated. It follows that any information about the presence and composition of the products applied, their chemical transformations and their distribution on the surfaces is essential. For these purposes, conservation scientists should seek and test new in situ methods, and this is of utmost importance especially in the case of buildings, considering their large dimensions and consequent extensive mapping. The effectiveness of portable Raman and portable mid-FTIR reflectance instruments has been compared by analysing a set of laboratory specimens prepared and treated with variable amounts of products belonging to three classes of polymers; the spectroscopic investigation highlighted, for the first time, the limits and the advantages of portable Raman and portable mid-FTIR reflectance instruments in the detection of small amounts of products commonly employed for the conservation of plasters.

Synchrotron X-ray diffraction computed tomography to non-destructively study inorganic treatments for stone conservation.

The characterization of consolidating products formed by conservation treatments within Cultural Heritage (CH) materials is a burning issue and an analytical challenge, as non-destructive approaches, phase analysis, and volume distribution analysis are simultaneously required. This paper proposes the use of synchrotron X-ray diffraction computed tomography (XRDCT) to non-destructively study diammonium hydrogen phosphate (DAP) consolidating treatments for stone conservation. The mineralogical composition and localization of crystalline phases formed in a complex mixture have been explored and spatially resolved. The coexistence of hydroxyapatite and octacalcium phosphate has been finally demonstrated. The image analysis highlights the 3D distribution of calcium phosphates, their arrangement in a binding network down to the voxel scale, and their consolidating action. Above all, this study demonstrates the feasibility and high potential of XRDCT to investigate the interactions of conservation treatments with CH stone materials, and opens new analytical perspectives for XRDCT in conservation science and materials science.

Stability and transformation mechanism of weddellite nanocrystals studied by X-ray diffraction and infrared spectroscopy.

This study is focused on the stability of weddellite, the dihydrate phase of calcium oxalate [CaC(2)O(4)·(2 + x)H(2)O], mainly detected in kidney stones and in oxalate films found on the surfaces of several ancient monuments. Its occurrence is a critical issue since, at environmental conditions, weddellite is unstable and quickly changes into whewellite, the monohydrate phase of calcium oxalate (CaC(2)O(4)·H(2)O). New single crystal X-ray diffraction experiments have been carried out, which confirm the structural model of weddellite previously published. Synthesised nanocrystals of weddellite have been kept under different hygrometric conditions in order to study, by X-ray powder diffraction, the influence of humidity on their stability. Moreover, the mechanism of transformation of weddellite nanocrystals has been investigated by infrared spectroscopy using D(2)O as a structural probe.

Synchrotron radiation µ X-ray diffraction in transmission geometry for investigating the penetration depth of conservation treatments on cultural heritage stone materials.

The assessment of the penetration depth of conservation treatments applied to cultural heritage stone materials is a burning issue in conservation science. Several analytical approaches have been proposed but, at present, many of them are not fully exhaustive to define in a direct way the composition and location of the conservation products formed after inorganic mineral treatments. Here, we explored, for the first time, the analytical capability of synchrotron radiation µ X-ray diffraction in transmission geometry (SR-µTXRD) for the study of the crystal chemistry and penetration depth of the consolidating phases formed after the application of diammonium hydrogen phosphate (DAP) treatments on a porous carbonatic stone (Noto limestone). The SR-µTXRD approach provided unambiguous information on the nature of the newly formed calcium phosphates (hydroxyapatite, HAP, and octacalcium phosphate, OCP) with depth, supplying important indications of the diffusion mechanism and the reactivity of the substrate. Qualitative and semi-quantitative data were obtained at the microscale with a non-destructive protocol and an outstanding signal-to-noise ratio. The SR-µTXRD approach opens a new analytical scenario for the investigation of a wide range of cultural heritage materials, including natural and artificial stone materials, painted stratigraphies, metals, glasses and their decay products. Furthermore, it can potentially be used to characterize the penetration depth of a phase "A" (or more crystalline phases) in a matrix "B" also beyond the cultural heritage field, demonstrating the potential wide impact of the study.

Thin lead sheets in the decorative features in Pavia Charterhouse.

The facade of the church of the Pavia Charterhouse, built at the end of the 15th century, shows outstanding decorative features made of different stone materials, such as marbles, breccias and sandstones. Magnificent ornamental elements are made of thin lead sheets, and some marble slabs are inlaid with them. Metal elements are shaped in complex geometric and phytomorphic design, to form a Greek fret in black contrasting with the white Carrara marble. Lead pins were fixed to the back of the thin lead sheets with the aim of attaching the metal elements to the marble; in so doing the pins and the lead sheets constitute a single piece of metal. In some areas, lead elements have been lost, and they have been substituted with a black plaster, matching the colour of the metal. To the authors' knowledge, this kind of decorative technique is rare, and confirms the refinement of Renaissance Lombard architecture. This work reports on the results of an extensive survey of the white, orange and yellowish layers, which are present on the external surface of the lead. The thin lead sheets have been characterized and their state of conservation has been studied with the aid of Optical Microscopy, SEM-EDS, FTIR and Raman analyses. Lead sulphate, lead carbonates and oxides have been identified as decay products.