Tribology and stability of organic monolayers on CrN: a comparison among silane, phosphonate, alkene, and alkyne chemistries.

The fabrication of chemically and mechanically stable monolayers on the surfaces of various inorganic hard materials is crucial to the development of biomedical/electronic devices. In this Article, monolayers based on the reactivity of silane, phosphonate, 1-alkene, and 1-alkyne moieties were obtained on the hydroxyl-terminated chromium nitride surface. Their chemical stability and tribology were systematically investigated. The chemical stability of the modified CrN surfaces was tested in aqueous media at 60 °C at pH 3, 7, and 11 and monitored by static water contact angle measurements, X-ray photoelectron spectroscopy (XPS), ellipsometry, and Fourier transform infrared reflection absorption spectroscopy (FT-IRRAS). The tribological properties of the resulting organic monolayers with different end groups (fluorinated or nonfluorinated) were studied using atomic force microscopy (AFM). It was found that the fluorinated monolayers exhibit a dramatic reduction of adhesion and friction force as well as excellent wear resistance compared to those of nonfluorinated coatings and bare CrN substrates. The combination of remarkable chemical stability and superior tribological properties makes these fluorinated monolayers promising candidates for the development of robust high-performance devices.

Organic modification and subsequent biofunctionalization of porous anodic alumina using terminal alkynes.

Porous anodic alumina (PAA) is a well-defined material that has found many applications. The range of applications toward sensing and recognition can be greatly expanded if the alumina surface is covalently modified with an organic monolayer. Here, we present a new method for the organic modification of PAA based on the reaction of terminal alkynes with the alumina surface. The reaction results in the the formation of a monolayer within several hours at 80 °C and is dependent on both oxygen and light. Characterization with X-ray photoelectron spectroscopy and infrared spectroscopy indicates formation of a well-defined monolayer in which the adsorbed species is an oxidation product of the 1-alkyne, namely, its α-hydroxy carboxylate. The obtained monolayers are fairly stable in water and at elevated temperatures, as was shown by monitoring the water contact angle. Modification with 1,15-hexadecadiyne resulted in a surface that has alkyne end groups available for further reaction, as was demonstrated by the subsequent reaction of N-(11-azido-3,6,9-trioxaundecyl)trifluoroacetamide with the modified surface. Biofunctionalization was explored by coupling 11-azidoundecyl lactoside to the surface and studying the subsequent adsorption of the lectin peanut agglutinin (PNA) and the yeast Candida albicans, respectively. Selective and reversible binding of PNA to the lactosylated surfaces was demonstrated. Moreover, PNA adsorption was higher on surfaces that exposed the ß-lactoside than on those that displayed the α anomer, which was attributed to surface-associated steric hindrance. Likewise, the lactosylated surfaces showed increased colonization of C. albicans compared to unmodified surfaces, presumably due to interactions involving the cell wall ß-glucan. Thus, this study provides a new modification method for PAA surfaces and shows that it can be used to induce selective adsorption of proteins and microorganisms.

Photochemical covalent attachment of alkene-derived monolayers onto hydroxyl-terminated silica.

The functionalization of optically transparent substrates is of importance, for example, in the field of biosensing. In this article, a new method for modification of silica surfaces is presented that is based on a photochemical reaction of terminal alkenes with the surface. This yields highly hydrophobic surfaces, which are thermally stable up to at least 400 degrees C. The formed monolayer provides chemical passivation of the underlying surface, according to studies showing successful blocking of platinum atomic layer deposition (ALD). The reaction is photochemically initiated, requiring light with a wavelength below 275 nm. X-ray photoelectron spectroscopy and infrared spectroscopy studies show that the alkenes initially bind to the surface hydroxyl groups in Markovnikov fashion. At prolonged reaction times (>5 h), however, oligomerization occurs, resulting in layer growth normal to the surface. The photochemical nature of the reaction enables the use of photolithography as a tool to constructively pattern silica surfaces. Atomic force microscopy shows that the features of the photomask are well transferred. The newly developed method can complement existing patterning methods on silica that are based on soft lithography.