Substrate-enhanced supercooling in AuSi eutectic droplets.

The phenomenon of supercooling in metals-that is, the preservation of a disordered, fluid phase in a metastable state well below the melting point-has led to speculation that local atomic structure configurations of dense, symmetric, but non-periodic packing act as the main barrier for crystal nucleation. For liquids in contact with solids, crystalline surfaces induce layering of the adjacent atoms in the liquid and may prevent or lower supercooling. This seed effect is supposed to depend on the local lateral order adopted in the last atomic layers of the liquid in contact with the crystal. Although it has been suggested that there might be a direct coupling between surface-induced lateral order and supercooling, no experimental observation of such lateral ordering at interfaces is available. Here we report supercooling in gold-silicon (AuSi) eutectic droplets, enhanced by a Au-induced (6 x 6) reconstruction of the Si(111) substrate. In situ X-ray scattering and ab initio molecular dynamics reveal that pentagonal atomic arrangements of Au atoms at this interface favour a lateral-ordering stabilization process of the liquid phase. This interface-enhanced stabilization of the liquid state shows the importance of the solid-liquid interaction for the structure of the adjacent liquid layers. Such processes are important for present and future technologies, as fluidity and crystallization play a key part in soldering and casting, as well as in processing and controlling chemical reactions for microfluidic devices or during the vapour-liquid-solid growth of semiconductor nanowires.

The In situ growth of Nanostructures on Surfaces (INS) endstation of the ESRF BM32 beamline: a combined UHV-CVD and MBE reactor for in situ X-ray scattering investigations of growing nanoparticles and semiconductor nanowires.

This paper presents the upgraded `In situ growth of Nanoscructures on Surfaces' (INS) endstation of the InterFace beamline IF-BM32 at the European Synchrotron Radiation Facility (ESRF). This instrument, originally designed to investigate the structure of clean surfaces/interfaces/thin-films by surface X-ray diffraction, has been further developed to investigate the formation and evolution of nanostructures by combining small- and wide-angle X-ray scattering methodologies, i.e. grazing-incidence small-angle X-ray scattering (GISAXS) and grazing-incidence X-ray diffraction (GIXD). It consists of a UHV chamber mounted on a z-axis type goniometer, equipped with residual gas analysis, reflection high-energy electron diffraction (RHEED) and Auger electron spectroscopy (AES) to complete the X-ray scattering investigations. The chamber has been developed so as up to eight sources of molecular beam epitaxy (MBE) can be simultaneously mounted to elaborate the nanostructures. A chemical vapor deposition (CVD) set-up has been added to expand the range of growing possibilities, in particular to investigate in situ the growth of semiconductor nanowires. This setup is presented in some detail, as well as the first in situ X-ray scattering measurements during the growth of silicon nanowires.

Quantitative contrast-enhanced ultrasound of intraplaque neovascularization in patients with carotid atherosclerosis.

PURPOSE: Intraplaque neovascularization (IPN) is an increasingly studied marker of the vulnerable atherosclerotic plaque, and contrast-enhanced ultrasound (CEUS) is an in vivo imaging technique for the assessment of IPN. The purpose of this study was to test novel quantification methods for the detection of carotid IPN using CEUS. MATERIALS AND METHODS: 25 patients with established carotid atherosclerosis underwent bilateral carotid CEUS using a Philips iU-22 ultrasound system with an L9 - 3 transducer. Visual scoring of IPN was performed using a 3-point score. Quantification of IPN was performed using novel custom developed software. In short, regions of interest were drawn over the atherosclerotic plaques. After motion compensation, several IPN features were calculated. Statistical analysis was performed using Spearman's rho. Reproducibility of the quantification features was calculated using intra-class correlation coefficients and mean differences between calculations. RESULTS: 45 carotid arteries were available for the quantification of IPN. The quantification of IPN was feasible in all 45 carotid plaques. The IPN area, IPN area ratio and neovessel count had a good correlation with the visual IPN score (respectively ρ = 0.719, ρ = 0.538, ρ = 0.474 all p < 0.01). The intra-observer and inter-observer agreement was good to excellent (p < 0.01). The intra-observer and inter-observer variability was low. CONCLUSION: The quantification of carotid IPN on CEUS is feasible and provides multiple features on carotid IPN. Accurate quantitative assessment of IPN may be important to recognize and to monitor changes during therapy in vulnerable atherosclerotic plaques.

Anisotropy of dynamic acoustoelasticity in limestone, influence of conditioning, and comparison with nonlinear resonance spectroscopy.

Anisotropy of wave velocity and attenuation induced by a dynamic uniaxial strain is investigated by dynamic acoustoelastic testing in limestone. Nonlinear resonance spectroscopy is performed simultaneously for comparison. A compressional resonance of the sample at 6.8 kHz is excited to produce a dynamic strain with an amplitude varied from 10(-7) to 10(-5). A sequence of ultrasound pulses tracks variations in ultrasonic velocity and attenuation. Variations measured when the ultrasound pulses propagate in the direction of the uniaxial strain are 10 times larger than when the ultrasound propagation occurs perpendicularly. Variations consist of a "fast" variation at 6.8 kHz and an offset. Acoustically induced conditioning is found to reduce wave velocity and enhance attenuation (offset). It also modifies "fast" nonlinear elastodynamics, i.e., wave amplitude dependencies of ultrasonic velocity and attenuation. At the onset of conditioning and beyond, different excitation amplitudes bring the material to non-equilibrium states. After conversion of velocity-strain dynamic relations into elastic modulus-strain dynamic relations and integration with respect to strain, the dynamic stress-strain relation is obtained. Analysis of stress-strain hysteresis shows that hysteretic nonlinear elasticity is not a significant source of the amplitude-dependent dissipation measured by nonlinear resonance spectroscopy. Mechanisms causing conditioning are likely producing amplitude-dependent dissipation as well.

Oblique impact of a buckling table-tennis ball on a rigid surface.

We report on the rebound of a table-tennis ball impinging without any initial spin in oblique incidence on a rigid surface. We show that, below a critical incidence angle, the ball rolls without sliding when bouncing back from the surface. In that case, the reflected angular velocity acquired by the ball can be predicted without any knowledge of the properties of the contact between the ball and the solid surface. Beyond the critical incidence angle, the condition of rolling without sliding is not reached within the time of contact with the surface. In this second case, one can predict the reflected angular and linear velocities, as well as the rebound angle, provided the supplementary knowledge of the friction coefficient associated with the ball-substrate contact.

Chirp resonance spectroscopy of single lipid-coated microbubbles using an "acoustical camera".

An acoustical method was developed to study the resonance of single lipid-coated microbubbles. The response of 127 SonoVue microbubbles to a swept sine excitation between 0.5 and 5.5 MHz with a peak acoustic pressure amplitude of 70 kPa was measured by means of a 25 MHz probing wave. The relative amplitude modulation in the signal scattered in response to the probing wave is approximately equal to the radial strain induced by the swept sine excitation. An average damping coefficient of 0.33 and an average resonance frequency of 2.5 MHz were measured. Microbubbles experienced an average peak radial strain of 20%.

Dynamical buckling of a table-tennis ball impinging normally on a rigid target: Experimental and numerical studies.

We report on the dynamical buckling of a spherical shell (a table-tennis ball) impinging in normal incidence on a rigid surface (a glass plate). Experimentally, we observe and decipher the geometrical characteristics of the shell profile in the contact region along with global metrics such as the contact duration and the coefficient of restitution of the linear velocity. We determine, in particular, the onset of the ball buckling instability. We find that, just like in quasi-statics, the shell buckles when the crushing exceeds about twice the thickness of the shell. In addition, for launching conditions resulting in the ball elastic buckling, a drop in the restitution coefficient is observed. A companion numerical finite elements study is set to monitor the different sources of energy and reveals that the added energy loss is mainly due to the friction between the shell surface and the solid substrate.

A combined In situ grazing incidence small angle X-ray scattering and grazing incidence X-ray diffraction study of the growth of Ge Islands on pit-patterned Si(001) substrates.

The growth of Ge islands on a pit-patterned Si(001) template is investigated in situ, combining grazing incidence diffraction, multiple wavelength anomalous diffraction, and small angle scattering. This allows monitoring in situ the detailed structural and morphological evolutions of the pits, of the wetting-layer and of the nucleated islands on the pit-patterned Si(001) substrate. It is shown that after Si regrowth, the Si substrate displays {107} and {1 1 11} facets. During the very first stages of Ge growth, the preliminary facets of the Si substrate are energetically unfavourable, and the pit facets break up into a rather complex pattern of {10n} and {11m} facets with n > 7 and m > 11. At 5 and 6 ML, intensity rods from {105} and {113}-type facets appear in the GISAXS images revealing the formation of pyramids and domes, respectively. The degree of ordering, the shape, strain and composition of the islands are characterized during the growth process to provide a detailed evolution of their structure and morphology.

Nonlinear elastodynamics in micro-inhomogeneous solids observed by head-wave based dynamic acoustoelastic testing.

Dynamic acoustoelastic testing provides a more complete insight into the acoustic nonlinearity exhibited by micro-inhomogeneous media like granular and cracked materials. This method consists of measuring time of flight and energy modulations of pulsed ultrasonic waves induced by a low-frequency standing wave. Here pulsed ultrasonic head waves were employed to assess elastic and dissipative nonlinearities in a region near the surface of a solid. Synchronization of the ultrasound pulse sequence with the low-frequency excitation provided instantaneous variations in the elastic modulus and the attenuation as functions of the instantaneous low-frequency strain. Weak quadratic elastic nonlinearity and no dissipative nonlinearity were detected in duralumin. In limestone, distinction between tensile and compressive behaviors revealed an asymmetry in the acoustic nonlinearity and hysteresis in both the elastic modulus and the attenuation variations. Measured nonlinear acoustical parameters are in good agreement with values obtained by different techniques. Reversible acoustically induced conditioning modified the acoustic nonlinearity both quantitatively and qualitatively. It reduced tension-compression asymmetry, suggesting a nonequilibrium modification of the sources of acoustic nonlinearity. Additionally to the metrology of the acoustic nonlinearity, head wave based dynamic acoustoelastic testing may be a useful tool to monitor changes in the microstructure or the accumulation of damage in solids.

Monitoring trabecular bone microdamage using a dynamic acousto-elastic testing method.

Dynamic acousto-elastic testing (DAET) is based on the coupling of a low-frequency (LF) acoustic wave and high-frequency ultrasound (US) pulses (probing wave). It was developed to measure US viscoelastic and dissipative non-linearity in trabecular bone. It is well known that this complex biphasic medium contains microdamage, even when tissues are healthy. The purpose of the present study was to assess the sensitivity of DAET to monitor microdamage in human calcanei. Three protocols were therefore performed to investigate the regional heterogeneity of the calcaneus, the correlation between DAET measurements and microdamage revealed by histology, and DAET sensitivity to mechanically induced fatigue microdamage. The non-linear elastic parameter beta was computed for all these protocols. The study demonstrated the presence of high viscoelastic and dissipative non-linearity only in the region of the calcaneus close to the anterior talocalcaneal articulation (region of high bone density). Protocols 1 and 2 also showed that most unsorted calcanei did not naturally exhibit high non-linearity, which is correlated with a low level of microcracks. Nevertheless, when microdamage was actually present, high levels of US non-linearity were always found, with characteristic non-linear signatures such as hysteresis and tension/compression asymmetry. Finally, protocol 3 demonstrated the high sensitivity of DAET measurement to fatigue-induced microdamage.

Photopatterning of PDMS Films: Challenging the Reaction between Benzophenone and Silicone Functional Groups.

Direct photopatterning of PDMS (Polydimethylsiloxane) through benzophenone photo-inhibition has received great interest in recent years. Indeed, the simplicity and versatility of this technique allows for easy processing of micro-canals, or local control of PDMS mechanical properties. Surprisingly, however, the chemical reactions between silicone hydride and/or silicone vinyl groups and benzophenone have only been assessed through qualitative methods (e.g., Attenuated total reflection fourier transform infrared). In this communication, the previously proposed reaction pathways are challenged, using nuclear magnetic resonance (NMR) spectroscopy and size exclusion chromatography (SEC) monitoring. A different mechanism depicting the role of benzophenone irradiation on the polyaddition reaction of silicone formulations is proposed, and a simplified procedure involving aromatic solvent is finally disclosed.

Development of a reactor for the in situ monitoring of 2D materials growth on liquid metal catalysts, using synchrotron x-ray scattering, Raman spectroscopy, and optical microscopy.

Liquid metal catalysts (LMCats) (e.g., molten copper) can provide a new mass-production method for two-dimensional materials (2DMs) (e.g., graphene) with significantly higher quality and speed and lower energy and material consumption. To reach such technological excellence, the physicochemical properties of LMCats and the growth mechanisms of 2DMs on LMCats should be investigated. Here, we report the development of a chemical vapor deposition (CVD) reactor which allows the investigation of ongoing chemical reactions on the surface of a molten metal at elevated temperatures and under reactive conditions. The surface of the molten metal is monitored simultaneously using synchrotron x-ray scattering, Raman spectroscopy, and optical microscopy, thereby providing complementary information about the atomic structure and chemical state of the surface. To enable in situ characterization on a molten substrate at high temperatures (e.g., ∼1370 K for copper), the optical and x-ray windows need to be protected from the evaporating LMCat, reaction products, and intense heat. This has been achieved by creating specific gas-flow patterns inside the reactor. The optimized design of the reactor has been achieved using multiphysics COMSOL simulations, which take into account the heat transfer, fluid dynamics, and transport of LMCat vapor inside the reactor. The setup has been successfully tested and is currently used to investigate the CVD growth of graphene on the surface of molten copper under pressures ranging from medium vacuum up to atmospheric pressure.

Elastic modulus variation in mandibular bone: a microindentation study of Macaca fascicularis.

We characterized the heterogeneous anisotropic elastic properties of mandibular bone in an adult female specimen of Macaca fascicularis using the technique of microindentation. This approach used an indenter of known mass and geometry to sample bone hardness at a spatial resolution in the order of 100 mum. Hardness values were converted to elastic modulus using empirically derived regression. We determined properties in alveolar, midcorpus, and basal regions of coronal and transverse sections taken from multiple locations along the corpus and ramus. Within sections, we determined properties from endosteal, midcortical, and periosteal regions. We found regional variations in bone structure, including bands of orthotropic circumferential lamellar bone at the endosteal and periosteal corpus base, angular region, and ramus. Transversely isotropic osteonal bone characterizes the midcortices of alveolar and basal regions, with many resorption spaces in alveolar regions restricting sampling opportunities. Regional variations in elasticity include relatively compliant bone in the anterior corpus and ramus. Basal cortical bone is stiffer longitudinally than transversely or superoinferiorly, while the evidence for directional dependence in alveolar bone is equivocal. Alveolar bone appears to be relatively compliant with respect to bone found in midcorpus or basal regions. Considerable variation exists in structure and material properties on a highly localized scale, more so than is discernible through conventional approaches for determining material property variation.

Tomography and imaging at the PSICHE beam line of the SOLEIL synchrotron.

PSICHE (Pressure, Structure and Imaging by Contrast at High Energy) is the high-energy beam line of the SOLEIL synchrotron. The beam line is designed to study samples at extreme pressures, using diffraction, and to perform imaging and tomography for materials science and other diverse applications. This paper presents the tomograph and the use of the beam line for imaging, with emphasis on developments made with respect to existing instruments. Of particular note are the high load capacity rotation stage with free central aperture for installing large or complex samples and sample environments, x-ray mirror and filter optics for pink beam imaging, and multiple options for combining imaging and diffraction measurement. We describe how x-ray imaging techniques have been integrated into high-pressure experiments. The design and the specifications of the beam line are described, and several case studies drawn from the first user experiments are presented.

Effect of apoprotein cross-linking on the metabolism of human HDL3 in rat.

Apo E-free human high-density lipoprotein (HDL3) was labeled with 125I in apoprotein and with 3H in cholesteryl linoleyl ether (a non-hydrolyzable analogue of cholesteryl ester). The labeled HDL3 was modified by cross-linking of apoproteins with dimethylsuberimidate (DMS) to inhibit binding to HDL specific receptors. The control and the DMS HDL3 were characterized with respect to their rate of clearance from rat blood, in vivo binding to major rat organs and in vitro binding to purified rat liver plasma membranes. Both 125I and 3H labels from control HDL3 were cleared from rat blood monoexponentially, but 3H at a faster rate than 125I (3H t1/2 = 3.0-4.1 h; 125I t1/2 = 7.0-7.7 h). This difference is consistent with reports of the nonendocytotic selective uptake of HDL-associated cholesteryl ester. DMS modification did not affect the rate of 3H clearance whereas it increased the rate of 125I clearance (HDL3 t1/2 = 7.7 h; DMS HDL3 t1/2 = 4.1 h). Both in vivo binding to rat organs and in vitro binding to rat liver membranes confirmed that DMS modification inhibited the specific binding of HDL, but also suggested that the modification produced saturable binding of HDL to a separate class of sites. Thus, the present data do not rule out the involvement of direct HDL-cell interaction in the selective uptake of HDL cholesteryl ester. However, results suggest that the binding of HDL to its specific cell surface sites is not necessary for this uptake.

Ethmozine for ventricular premature complexes.

Twenty patients with an average of more than 30 ventricular premature complexes (VPCs) per hour were treated with ethmozine. Eighteen had either not responded or had adverse reactions to at least 1 other antiarrhythmic drug. Patients were treated with 200 to 300 mg 3 times daily (8.25 to 11.7 mg/kg) and were followed for up to 6 months. Three patients were withdrawn from ethmozine therapy because of unwanted effects before evaluation of efficacy. One of these patients had sustained ventricular tachycardia (VT) after a loading dose of ethmozine. Eleven of the remaining 17 patients (65%) experienced more than a 75% reduction in ventricular ectopic activity. Six patients had a smaller or no decrease in VPC frequency. Eleven of 16 patients (68%) with paired VPCs had a more than 90% reduction in paired VPC frequency. Eleven of 13 patients (84%) with VT events of 3 beats or more had more than a 90% reduction in VT events. Of the 11 patients in whom a more than 75% reduction in VPC frequency occurred, 1 patient died suddenly after 133 days of effective drug therapy. Three patients discontinued ethmozine therapy for reasons not related to the drug. Of the 6 patients in whom there was less than a 75% reduction in VPC frequency, 2 patients discontinued treatment, 1 patient because of hyperanxiety and 1 because of drug-related left anterior hemiblock. Ethmozine lengthened PR and QRS intervals but not the JT interval. Thus, ethmozine is effective and clinically useful for suppression of frequency VPCs in 50% (10 of 20 patients) of a selected population.

Atomic structure of the polar NiO(111)- p(2x2) surface

Using grazing-incidence x-ray diffraction, the p(2x2) surface structures of the single crystal NiO(111) and a 5 monolayer thick NiO(111) film on Au(111) were both shown to exhibit locally the theoretically predicted octopolar reconstruction, with some important differences. The single crystal exhibits a single Ni termination with double steps. The thin film exhibits both possible terminations (O and Ni) and single steps. These surfaces were found to be nonreactive with respect to hydroxylation.

Effect of native phosphocaseinate on the in vitro preservation of fresh semen.

The fertilization capacity of goat sperm stored in milk extenders is approximately 12-24h. Long-term storage of goat sperm (up to 3 days) is desirable as it would confer greater flexibility to breeding farms. The aim of this study was to evaluate in vitro motility parameters of buck spermatozoa for up to 7 days of storage using skim milk or chemically defined extender supplemented with native phosphocaseinate (NPPC). Four experiments were conducted to determine optimum temperature (4 or 15 degrees C) and storage conditions (aerobic versus anaerobic), the effect of seminal plasma on sperm survival, the optimal concentration of NPPC and the effect of beta lactoglobulin (BL). Both skim milk and NPPC were found to be more efficient for preserving goat sperm at 4 degrees C than at 15 degrees C (P<0.01). Furthermore, when sperm was stored at 4 degrees C, no detrimental effects of seminal plasma were observed. Our results showed that motility parameters can be maintained with success until Day 4. However, NPPC-based extenders extend the in vitro survival to 7 days of storage. The optimal concentration of NPPC for the preservation of sperm cells for 4 days of storage was 81g/l and for 7 days of storage was 81 and 54g/l. No effect of the supplementation of the NPPC extender with BL was found.

[AIDS mortality in France]. / Mortalité par SIDA en France.

A study about mortality by AIDS had been undertaken since July 1st 1983, in the Service of Information on Medical causes of Death (INSERM SC8), which is in charge of developing mortality statistics in France. From July 1st 1983 to September 30th 1985, 243 deaths due to AIDS were recorded. Only the cases where this diagnosis was clearly mentioned were selected; more than 90% were notified by hospitals and mainly by highly specialized services. The number of deaths, which was low and varied rather irregularly at the beginning, then increased by successive stages. The first year, during which a tenth of deaths was recorded every three months, was followed by a great increase, doubling, then tripling the initial numbers. Lastly, a second and sudden rise occurred during the third trimester of 1985, the trimestrial number of deaths due to AIDS reaching 80.

[Evaluation of the medical and social cost of 2 trichinosis outbreaks in France in 1985]. / Evaluation du coût médical et social de deux épidémies de trichinose survenues en France en 1985.

Two outbreaks of trichinosis occurred in France in 1985 and 1,073 cases were identified. These outbreaks were related to the consumption of parasitized horse meat. The medical and social cost of these outbreaks have been estimated with a sample of 92 patients. The average medical cost was 1,200 FF by outpatient and 17,300 FF by hospitalized patient. For the 1,073 cases, the total cost of these 2 outbreaks is estimated to have been between 7 and 11 millions FF. Of this sum, the hospitalization fees exceeded 51% and the social cost was 36% (loss of productivity). Since October 1985, a decree of the French Ministry of Agriculture has imposed a parasitologic test on all horse carcasses slaughtered in France or imported. This examination costs under 5 FF (under $1) per carcass. This study shows that the systematic examination for trichinosis of horse meat carcasses should be continued and that more sensitive screening methods should be developed.