Genipin-crosslinked chitosan/alginate/alumina nanocomposite gels for 3D bioprinting.

Immobilizing microorganisms inside 3D printed semi-permeable substrates can be desirable for biotechnological processes since it simplifies product separation and purification, reducing costs, and processing time. To this end, we developed a strategy for synthesizing a feedstock suitable for 3D bioprinting of mechanically rigid and insoluble materials with embedded living bacteria. The processing route is based on a highly particle-filled alumina/chitosan nanocomposite gel which is reinforced by (a) electrostatic interactions with alginate and (b) covalent binding between the chitosan molecules with the mild gelation agent genipin. To analyze network formation and material properties, we characterized the rheological properties and printability of the feedstock gel. Stability measurements showed that the genipin-crosslinked chitosan/alginate/alumina gels did not dissolve in PBS, NaOH, or HCl after 60 days of incubation. Alginate-containing gels also showed less swelling in water than gels without alginate. Furthermore, E. coli bacteria were embedded in the nanocomposites and we analyzed the influence of the individual bioink components as well as of the printing process on bacterial viability. Here, the addition of alginate was necessary to maintain the effective viability of the embedded bacteria, while samples without alginate showed no bacterial viability. The experimental results demonstrate the potential of this approach for producing macroscopic bioactive materials with complex 3D geometries as a platform for novel applications in bioprocessing.

Arsenic and sulfur nanoparticle synthesis mimicking environmental conditions of submarine shallow-water hydrothermal vents.

Arsenic and sulfur mineralization is a natural phenomenon occurring in hydrothermal systems where parameters like temperature and organic matter (OM) can influence the mobilization of the toxic metalloid in marine environments. In the present study we analyze the influence of temperature and OM (particularly sulfur-containing additives) on As and S precipitation based on the recent discovery of As-rich nanoparticles in the hydrothermal system near the coast of the Greek island Milos. To this end, we experimentally recreate the formation of amorphous colloidal particles rich in As and S via acidification (pH 3-4) of aqueous precursors at various temperatures. At higher temperatures, we observe the formation of monodisperse particles within the first 24 h of the experiment, generating colloidal particles with diameters close to 160 nm. The S:As ratio and particle size of the synthetized particles closely correlates with values for AsxSy particles detected in the hydrothermal system off Milos. Furthermore, organic sulfur containing additives (cysteine and glutathione, GSH) are a key factor in the process of nucleation and growth of amorphous colloidal AsxSy particles and, together with the temperature gradient present in shallow hydrothermal vents, dictate the stabilization of As-bearing nanomaterials in the environment. Based on these findings, we present a simple model that summarizes our new insights into the formation and mobility of colloidal As in aquatic ecosystems. In this context, amorphous AsxSy particles can present harmful effects to micro- and macro-biota not foreseen in bulk As material.

Synergistic and Competitive Adsorption of Hydrophilic Nanoparticles and Oil-Soluble Surfactants at the Oil-Water Interface.

Fundamental insights into the interplay and self-assembly of nanoparticles and surface-active agents at the liquid-liquid interface play a pivotal role in understanding the ubiquitous colloidal systems present in our natural surroundings, including foods and aquatic life, and in the industry for emulsion stabilization, drug delivery, or enhanced oil recovery. Moreover, well-controlled model systems for mixed interfacial adsorption of nanoparticles and surfactants allow unprecedented insights into nonideal or contaminated particle-stabilized emulsions. Here, we investigate such a model system composed of hydrophilic, negatively, and positively charged silica nanoparticles and the oil-soluble cationic lipid octadecyl amine with in situ synchrotron-based X-ray reflectometry, which is analyzed and discussed jointly with dynamic interfacial tensiometry. Our results indicate that negatively charged silica nanoparticles only adsorb if the oil-water interface is covered with the positively charged lipid, indicating synergistic adsorption. Conversely, the positively charged nanoparticles readily adsorb on their own, but compete with octadecyl amine and reversibly desorb with increasing concentrations of the lipid. These results further indicate that with competitive adsorption, an electrostatic exclusion zone exists around the adsorbed particles. This prevents the adsorption of lipid molecules in this area, leading to a decreased surface excess concentration of surfactants and unexpectedly high interfacial tension.

Reversible Adsorption of Nanoparticles at Surfactant-Laden Liquid-Liquid Interfaces.

In this study, we show that hydrophilic nanoparticles can readily desorb from liquid-liquid interfaces in the presence of surfactants that do not change the wettability of the particles. Our observations are based on a simple theoretical approach to assess the number of adsorbed particles at the surfactant-laden liquid-liquid interface. We test this approach by studying the interfacial self-assembly of equally charged particles and lipids dissolved in separate immiscible phases. Hence, we investigate the interfacial adsorption of aminated silica particles (80 nm) and octadecylamine to the decane/water interface by interfacial tension measurements, which are supplemented by interfacial rheology of the adsorbed interfacial films, scanning electron microscopy images of Langmuir-Blodgett films, and measurements of the three-phase contact angle of the particle surface in the presence of surfactants. The measurements show that particles adsorb at the surfactant-laden interface at all investigated surfactant concentrations and compete with the surfactants for interfacial coverage. Additionally, the wettability of the hydrophilic particles does not change in the presence of the lipids, except for the highest investigated lipid concentration. Comparing the adsorption energies of one particle and of the lipids as a function of the particle contact angle provides an estimate of the tendency for interfacial adsorption of particles from which the particle coverage can be assessed. Based on these findings, equally charged particles and lipids show a competitive behavior at the interface determined by the bulk surfactant concentration and the attachment energies of the particles at the interface. This leads to a simple mechanistic model demonstrating that particles can readily desorb from the interface due to direct displacement by surfactants, which are loosely adsorbed at the oil-facing particle side. This mechanism critically lowers the otherwise high interfacial energy barrier against particle desorption, which otherwise would lead to virtually irreversible particle attachment at the interface.

Embedding live bacteria in porous hydrogel/ceramic nanocomposites for bioprocessing applications.

In this work, we present a biocompatible one-pot processing route for ceramic/hydrogel nanocomposites in which we embed live bacteria. In our approach, we fabricate a highly stable alginate hydrogel with minimal shrinkage, highly increased structural and mechanical stability, as well as excellent biocompatibility. The hydrogel was produced by ionotropic gelation and reinforced with alumina nanoparticles to form a porous 3D network. In these composite gels, the bacteria Escherichia coli and Bacillus subtilis were embedded. The immobilized bacteria showed high viability and similar metabolic activity as non-embedded cells. Even after repeated glucose consumption cycles, the material maintained high structural stability with stable metabolic activity of the immobilized bacteria. Storing the bionanocomposite for up to 60 days resulted in only minor loss of activity. Accordingly, this approach shows great potential for producing macroscopic bioactive materials for biotechnological processes.

Colloidal capsules: nano- and microcapsules with colloidal particle shells.

Utilizing colloidal particles for the assembly of the shell of nano- and microcapsules holds great promise for the tailor-made design of new functional materials. Increasing research efforts are devoted to the synthesis of such colloidal capsules, by which the integration of modular building blocks with distinct physical, chemical, or morphological characteristics in a capsule's shell can result in novel properties, not present in previous encapsulation structures. This review will provide a comprehensive overview of the synthesis strategies and the progress made so far of bringing nano- and microcapsules with shells of densely packed colloidal particles closer to application in fields such as chemical engineering, materials science, or pharmaceutical and life science. The synthesis routes are categorized into the four major themes for colloidal capsule formation, i.e. the Pickering-emulsion based formation of colloidal capsules, the colloidal particle deposition on (sacrificial) templates, the amphiphilicity driven self-assembly of nanoparticle vesicles from polymer-grafted colloids, and the closely related field of nanoparticle membrane-loading of liposomes and polymersomes. The varying fields of colloidal capsule research are then further categorized and discussed for micro- and nano-scaled structures. Finally, a special section is dedicated to colloidal capsules for biological applications, as a diverse range of reports from this field aim at pharmaceutical agent encapsulation, targeted drug-delivery, and theranostics.

Amino-Functionalized Ceramic Capillary Membranes for Controlled Virus Retention.

A straightforward chemical functionalization strategy using aminosilanes for high-flux yttria-stabilized zirconia capillary membranes is presented (macroporous, d50 = 144 nm, open porosity =49%, membrane flux ∼150 L/(m(2)hbar)). Three different aminosilanes with one, two or three amino groups per silane molecule, namely 3-aminopropyltriethoxysilane (APTES), N-(2-aminoethyl)-3-aminopropyltriethoxysilane (AE-APTES) and N-(3-trimethoxysilylpropyl)diethylenetriamine (TPDA), are used to generate the amino-functionalized membranes. With a higher number of amino groups per silane molecule increased loading capacities between 0.44 and 1.01 accessible amino groups/nm(2) membrane are achieved. Streaming potential measurements confirm that the zeta-potential of the membrane surface is converted from negative (non-functionalized) to positive (amino-functionalized). By operation in dead-end filtration mode using the model virus MS2 (diameter = 25 nm, IEP = 3.9) the virus retention capacity of the amino-functionalized membranes is significantly increased and log reduction values (LRVs) of up to 9.6 ± 0.3 (TPDA) are obtained whereas a LRV < 0.3 is provided by the non-functionalized membranes. Long-term dead-end filtration experiments for 1 week reveal a high stability of immobilized aminosilanes (TPDA), being robust against leaching. By iterative backflushing with desorption buffer MS2-loaded membranes are successfully regenerated being reusable for a new filtration cycle. The presented functionalization platform is highly promising for controlled virus retention.

Bifunctional submicron colloidosomes coassembled from fluorescent and superparamagnetic nanoparticles.

Colloidosomes are microcapsules consisting of nanoparticle shells. These microcarriers can be self-assembled from a wide range of colloidal particles with selective chemical, physical, and morphological properties and show promise for application in the field of theranostic nanomedicine. Previous studies have mainly focused on fairly large colloidosomes (>1 µm) based on a single kind of particle; however, the intrinsic building-block nature of this microcarrier has not been exploited so far for the introduction of tailored functionality at the nanoscale. We report a synthetic route based on interfacial shear rheology studies that allows the simultaneous incorporation of different nanoparticles with distinct physical properties, that is, superparamagnetic iron oxide and fluorescent silica nanoparticles, in a single submicron colloidosome. These tailor-made microcapsules can potentially be used in various biomedical applications, including magnetic hyperthermia, magnetic particle imaging, drug targeting, and bioimaging.

The role of ligands on protein retention in adsorption chromatography: a surface energetics approach.

Protein adsorption onto hydrophobic chromatographic supports has been investigated using a colloid theory surface energetics approach. The surface properties of commercially available chromatographic beads, Toyopearl Phenyl 650-C, and Toyopearl Butyl 650-C, have been experimentally determined by contact angle and zeta potential measurements. The adsorption characteristics of these beads, which bear the same backbone matrix but harbor different ligands, have been studied toward selected model proteins, in the hydrated as well as dehydrated state. There were two prominent groups of proteins observed with respect to the chromatographic supports presented in this work: loosely retained proteins, which were expected to have lower average interaction energies, and the strongly retained proteins, which were expected to have higher average interaction energies. Results were also compared and contrasted with calculations derived from adsorbent surface energies determined by inverse liquid chromatography. These results showed a good qualitative agreement, and the interaction energy minima obtained from these extended Derjaguin, Landau, Verwey and Overbeek calculations were shown to correlate well with the experimentally determined adsorption behavior of each protein.

Adsorption and orientation of the physiological extracellular peptide glutathione disulfide on surface functionalized colloidal alumina particles.

Understanding the interrelation between surface chemistry of colloidal particles and surface adsorption of biomolecules is a crucial prerequisite for the design of materials for biotechnological and nanomedical applications. Here, we elucidate how tailoring the surface chemistry of colloidal alumina particles (d50 = 180 nm) with amino (-NH2), carboxylate (-COOH), phosphate (-PO3H2) or sulfonate (-SO3H) groups affects adsorption and orientation of the model peptide glutathione disulfide (GSSG). GSSG adsorbed on native, -NH2-functionalized, and -SO3H-functionalized alumina but not on -COOH- and -PO3H2-functionalized particles. When adsorption occurred, the process was rapid (≤5 min), reversible by application of salts, and followed a Langmuir adsorption isotherm dependent on the particle surface functionalization and ζ potential. The orientation of particle bound GSSG was assessed by the release of glutathione after reducing the GSSG disulfide bond and by ζ potential measurements. GSSG is likely to bind via the carboxylate groups of one of its two glutathionyl (GS) moieties onto native and -NH2-modified alumina, whereas GSSG is suggested to bind to -SO3H-modified alumina via the primary amino groups of both GS moieties. Thus, GSSG adsorption and orientation can be tailored by varying the molecular composition of the particle surface, demonstrating a step toward guiding interactions of biomolecules with colloidal particles.

Controlling mixed-protein adsorption layers on colloidal alumina particles by tailoring carboxyl and hydroxyl surface group densities.

We show that different ratios of bovine serum albumin (BSA) and lysozyme (LSZ) can be achieved in a mixed protein adsorption layer by tailoring the amounts of carboxyl (-COOH) and aluminum hydroxyl (AlOH) groups on colloidal alumina particles (d50 ≈ 180 nm). The particles are surface-functionalized with -COOH groups, and the resultant surface chemistry, including the remaining AlOH groups, is characterized and quantified using elemental analysis, ζ potential measurements, acid-base titration, IR spectroscopy, electron microscopy, nitrogen adsorption, and dynamic light scattering. BSA and LSZ are subsequently added to the particle suspensions, and protein adsorption is monitored by in situ ζ potential measurements while being quantified by UV spectroscopy and gel electrophoresis. A comparison of single-component and sequential protein adsorption reveals that BSA and LSZ have specific adsorption sites: BSA adsorbs primarily via AlOH groups, whereas LSZ adsorbs only via -COOH groups (1-2 -COOH groups on the particle surface is enough to bind one LSZ molecule). Tailoring such groups on the particle surface allows control of the composition of a mixed BSA and LSZ adsorption layer. The results provide further insight into how particle surface chemistry affects the composition of protein adsorption layers on colloidal particles and is valuable for the design of such particles for biotechnological and biomedical applications.

Effective bacterial inactivation and removal of copper by porous ceramics with high surface area.

In this study, we present porous ceramics combining the antibacterial effect of copper with an integrated copper removal adsorbent. After preparing and characterizing the antibacterial copper-doped microbeads and monoliths (CuBs and CuMs), their antibacterial efficiency is probed against different nonpathogenic and pathogenic bacteria (Bacillus subtilis, Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa). An antibacterial efficiency of 100% is reached within 15 min to 3 h for all tested strains under static conditions. Dynamic tests with B. subtilis and E. coli showed high antibacterial efficiency up to 99.93% even at continuous flux. To avoid any adverse effects on the environment, continuous removal of released copper-ions is accomplished with porous, high surface area monolithic adsorbents (MAds). MAds are prepared similarly to the CuMs but without adding copper during the manufacturing process. MAds reduce the amount of copper released from the CuMs ≥ 99% during the first 15 min, ≥90% up to 2 h, and after 22 h of continuous filtration up to 56% of the released copper is removed.

SiOC Screens with Aligned and Adjustable Pore Structure for Screen Channel Liquid Acquisition Device.

The development of porous ceramic screens with high chemical stability, low density, and thermal conductivity can lead to promising screen channel liquid acquisition devices (SC-LADs) for propellant management under microgravity conditions in the future. Therefore, SiOC screens with aligned pores were fabricated via freeze-casting and applied as a SC-LAD. The pore window sizes and open porosity varied from 6 µm to 43 µm and 65% or 79%, depending on the freezing temperature or the solid loading, respectively. The pore window size distributions and bubble point tests indicate crack-free screens. On the one hand, SC-LADs with an open porosity of 79% removed gas-free liquid up to a volumetric flow rate of 4 mL s-1. On the other hand, SC-LADs with an open porosity of 65% were limited to 2 mL s-1 as the pressure drop across these screens was relatively higher. SC-LADs with the same open porosity but smaller pore window sizes showed a higher pressure drop across the screen and bubble ingestion at higher values of effective screen area when increasing the applied removal volumetric flow rate. The removed liquid from the SC-LADs was particle-free, thus representing a potential for applications in a harsh chemical environment or broad-range temperatures.

Highly efficient enzyme-functionalized porous zirconia microtubes for bacteria filtration.

In contrast to polymer membranes, ceramic membranes offer considerable advantages for safe drinking water provision due to their excellent chemical, thermal, and mechanical endurance. In this study, porous ceramic microtubes made of yttria stabilized zirconia (YSZ) are presented, which are conditioned for bacteria filtration by immobilizing lysozyme as an antibacterial enzyme. In accordance with determined membrane pore sizes of the nonfunctionalized microtube of ≤200 nm, log reduction values (LRV) of nearly 3 (i.e., bacterial retention of 99.9%) were obtained for bacterial retention studies using gram-positive model bacterium Micrococcus luteus. Immobilization studies of lysozyme on the membrane surface reveal an up to six times higher lysozyme loading for the covalent immobilization route as compared to unspecific immobilization. Antibacterial activity of lysozyme-functionalized microtubes was assessed by qualitative agar plate test using Micrococcus luteus as substrate showing that both the unspecific and the covalent lysozyme immobilization enhance the microtubes' antibacterial properties. Quantification of the enzyme activity at flow conditions by photometric assays reveals that the enzyme activities of lysozyme-functionalized microtubes depend strongly on applied flow rates. Intracapillary feeding of bacteria solution and higher flow rates lead to reduced enzyme activities. In consideration of different applied flow rates in the range of 0.2-0.5 mL/min, the total lysozyme activity increases by a factor of 2 for the covalent immobilization route as compared to the unspecific binding. Lysozyme leaching experiments at flow conditions for 1 h show a significant higher amount of washed-out lysozyme (factor 1.7-3.4) for the unspecific immobilization route when compared to the covalent route where the initial level of antibacterial effectiveness could be achieved by reimmobilization with lysozyme. The presented platform is highly promising for sustainable bacteria filtration.

Influence of the Pyrolysis Temperature and TiO2-Incorporation on the Properties of SiOC/SiC Composites for Efficient Wastewater Treatment Applications.

This study focuses on the development of porous ceramer and SiOC composites which are suitable for microfiltration applications, using a mixture of polysiloxanes as the preceramic precursor. The properties of the membranes-such as their pore size, hydrophilicity, specific surface area, and mechanical resistance-were tailored in a one-step process, according to the choice of pyrolysis temperatures (600-1000 °C) and the incorporation of micro- (SiC) and nanofillers (TiO2). Lower pyrolysis temperatures (<700 °C) allowed the incorporation of TiO2 in its photocatalytically active anatase phase, enabling the study of its photocatalytic decomposition. The produced materials showed low photocatalytic activity; however, a high adsorption capacity for methylene blue was observed, which could be suitable for dye-removal applications. The membrane performance was evaluated in terms of its maximum flexural strength, water permeation, and separation of an oil-in-water emulsion. The mechanical resistance increased with an increase of the pyrolysis temperature, as the preceramic precursor underwent the ceramization process. Water fluxes varying from 2.5 to 370 L/m2·h (2 bar) were obtained according to the membrane pore sizes and surface characteristics. Oil-rejection ratios of 81-98% were obtained at an initial oil concentration of 1000 mg/L, indicating a potential application of the produced PDC membranes in the treatment of oily wastewater.

Assessment of nanoparticle immersion depth at liquid interfaces from chemically equivalent macroscopic surfaces.

HYPOTHESIS: We test whether the wettability of nanoparticles (NPs) straddling at an air/water surface or oil/water interface can be extrapolated from sessile drop-derived macroscopic contact angles (mCAs) on planar substrates, assuming that both the nanoparticles and the macroscopic substrates are chemically equivalent and feature the same electrokinetic potential. EXPERIMENTS: Pure silica (SiO2) and amino-terminated silica (APTES-SiO2) NPs are compared to macroscopic surfaces with extremely low roughness (root mean square [RMS] roughness ≤ 2 nm) or a roughness determined by a close-packed layer of NPs (RMS roughness âˆ¼ 35 nm). Equivalence of the surface chemistry is assessed by comparing the electrokinetic potentials of the NPs via electrophoretic light scattering and of the macroscopic substrates via streaming current analysis. The wettability of the macroscopic substrates is obtained from advancing (ACAs) and receding contact angles (RCAs) and in situ synchrotron X-ray reflectivity (XRR) provided by the NP wettability at the liquid interfaces. FINDINGS: Generally, the RCA on smooth surfaces provides a good estimate of NP wetting properties. However, mCAs alone cannot predict adsorption barriers that prevent NP segregation to the interface, as is the case with the pure SiO2 nanoparticles. This strategy greatly facilitates assessing the wetting properties of NPs for applications such as emulsion formulation, flotation, or water remediation.

Adsorption and reduction of glutathione disulfide on α-Al2O3 nanoparticles: experiments and modeling.

Glutathione disulfide (GSSG; γ-GluCysGly disulfide) was used as a physiologically relevant model molecule to investigate the fundamental adsorption mechanisms of polypeptides onto α-alumina nanoparticles. Its adsorption/desorption behavior was studied by enzymatic quantification of the bound GSSG combined with zeta potential measurements of the particles. The adsorption of GSSG to alumina nanoparticles was rapid, was prevented by alkaline pH, was reversed by increasing ionic strength, and followed a nearly ideal Langmuir isotherm with a standard Gibbs adsorption energy of -34.7 kJ/mol. Molecular dynamics simulations suggest that only one of the two glutathionyl moieties contained in GSSG binds stably to the nanoparticle surface. This was confirmed experimentally by the release of GSH from the bound GSSG upon reducing its disulfide bond with dithiothreitol. Our data indicate that electrostatic interactions via the carboxylate groups of one of the two glutathionyl moieties of GSSG are predominantly responsible for the binding of GSSG to the alumina surface. The results and conclusions presented here can provide a base for further experimental and modeling studies on the interactions of biomolecules with ceramic materials.

Uptake of dimercaptosuccinate-coated magnetic iron oxide nanoparticles by cultured brain astrocytes.

Magnetic iron oxide nanoparticles (Fe-NP) are currently considered for various diagnostic and therapeutic applications in the brain. However, little is known on the accumulation and biocompatibility of such particles in brain cells. We have synthesized and characterized dimercaptosuccinic acid (DMSA) coated Fe-NP and have investigated their uptake by cultured brain astrocytes. DMSA-coated Fe-NP that were dispersed in physiological medium had an average hydrodynamic diameter of about 60 nm. Incubation of cultured astrocytes with these Fe-NP caused a time- and concentration-dependent accumulation of cellular iron, but did not lead within 6 h to any cell toxicity. After 4 h of incubation with 100-4000 µM iron supplied as Fe-NP, the cellular iron content reached levels between 200 and 2000 nmol mg⁻¹ protein. The cellular iron content after exposure of astrocytes to Fe-NP at 4 °C was drastically lowered compared to cells that had been incubated at 37 °C. Electron microscopy revealed the presence of Fe-NP-containing vesicles in cells that were incubated with Fe-NP at 37 °C, but not in cells exposed to the nanoparticles at 4 °C. These data demonstrate that cultured astrocytes efficiently take up DMSA-coated Fe-NP in a process that appears to be saturable and strongly depends on the incubation temperature.

Effect of Collagen Nanofibers and Silanization on the Interaction of HaCaT Keratinocytes and 3T3 Fibroblasts with Alumina Nanopores.

During wound healing, a complex cascade of cellular and molecular events occurs, which is governed by topographical and biochemical cues. Therefore, optimal tissue repair requires scaffold materials with versatile structural and biochemical features. Nanoporous anodic aluminum oxide (AAO) membranes exhibit good biocompatibility along with customizable nanotopography and antimicrobial properties, which has brought them into the focus of wound treatment. However, despite their good permeability, such bioinert ceramic nanopores cannot actively promote cell growth as they lack biochemical cues to support specific ligand-receptor interactions. Therefore, we modified AAO nanopores with the biochemical features of collagen nanofibers or amino groups provided by silanization with (3-aminopropyl)triethoxysilane (APTES) to design a permeable scaffold material that can additionally promote cell adhesion. Viability assays revealed that the metabolic activity of both 3T3 fibroblasts and HaCaT keratinocytes on bare and silanized AAO pores was comparable to glass controls until 72 h. Interestingly, both cell types showed a reduced proliferation on AAO with collagen nanofibers. Nevertheless, scanning electron and fluorescence microscopy revealed that 3T3 fibroblasts exhibited a well-spread morphology with filopodia attached to the nanoporous surface of the underlying AAO membranes or nanofibrous collagen networks, thus indicating a close interaction with the composites. Keratinocytes, although growing in clusters on bare and APTES-modified AAO, also adhered well on collagen-modified AAO membranes. When in contact with Escherichia coli suspensions for 20 h, the AAO membranes successfully prevented bacteria penetration irrespective of the biochemical functionalization. In summary, both functionalization strategies have high potential to specifically control molecular signaling and cell migration to further develop alumina nanopores for wound healing.

One-dimensional polymer-derived ceramic nanowires with electrocatalytically active metallic silicide tips as cathode catalysts for Zn-air batteries.

New metallic nickel/cobalt/iron silicide droplets at the tips of polymer-derived ceramic (PDC) nanowires have been identified as stable and efficient cathode catalysts for Zn-air batteries. The as-prepared catalyst having a unique one-dimensional (1D) PDC nanowire structure with the presence of metallic silicide tips of 1D-PDC plays a crucial role in facilitating oxygen reduction/evolution reaction kinetics. The Zn-air battery was designed using Ni/PDC, Co/PDC and Fe/PDC as air electrode catalysts. In electrochemical half-cell tests, it was observed that the catalysts have a good bifunctional electrocatalytic activity. The efficiency of the catalysts to function as a cathode catalyst in real-time primary and mechanically rechargeable Zn-air battery configurations was determined. The primary battery testing results revealed that Ni/PDC and Co/PDC exhibited a stable discharge voltage plateau up to 29 h. The Fe/PDC sample, on the other hand, performed up to 23 h with an operating potential of 1.20 V at the discharge current density of 5 mA cm-2 after which the battery ceased to perform. The Ni/PDC, Co/PDC, and Fe/PDC cathode catalysts performed galvanostatic 1200 charge-discharge cycles in a mechanically rechargeable secondary Zn-air battery configuration. The results demonstrate that the Ni/PDC, Co/PDC, and Fe/PDC materials serve as excellent and durable bifunctional cathode electrocatalysts for Zn-air batteries.