RESUMO
One-dimensional ZnO nanostructures have shown great potential in electronics, optoelectronics and electromechanical devices owing to their unique physical and chemical properties. Most of these nanostructures were grown by equilibrium processes where the defects density is controlled by thermodynamic equilibrium. In this work, flash sintering, a non-equilibrium field-assisted processing method, has been used to synthesize ZnO nanostructures. By applying a high electric field and limiting a low current flow, ZnO nanorods grew uniformly by a vapor-liquid-solid mechanism due to the extreme temperatures achieved near the hot spot. High density basal stacking faults in the nanorods along with ultraviolet excitonic emission and a red emission under room temperature demonstrate the potential of defect engineering in nanostructures via the field-assisted growth method.
RESUMO
Sintering is an important processing step in both ceramics and metals processing. The microstructure resulting from this process determines many materials properties of interest. Hence the accurate prediction of the microstructure, depending on processing and materials parameters, is of great importance. The phase-field method offers a way of predicting this microstructural evolution on a mesoscopic scale. The present paper employs this method to investigate concurrent densification and grain growth and the influence of stress on densification. Furthermore, the method is applied to simulate the entire freeze-casting process chain for the first time ever by simulating the freezing and sintering processes separately and passing the frozen microstructure to the present sintering model.
RESUMO
For millennia, ceramics have been densified via sintering in a furnace, a time-consuming and energy-intensive process. The need to minimize environmental impact calls for new physical concepts beyond large kilns relying on thermal radiation and insulation. Here, we realize ultrarapid heating with intense blue and UV-light. Thermal management is quantified in experiment and finite element modelling and features a balance between absorbed and radiated energy. With photon energy above the band gap to optimize absorption, bulk ceramics are sintered within seconds and with outstanding efficiency (≈2 kWh kg-1) independent of batch size. Sintering on-the-spot with blacklight as a versatile and widely applicable power source is demonstrated on ceramics needed for energy storage and conversion and in electronic and structural applications foreshadowing economic scalability.
RESUMO
Functional and structural ceramics have become irreplaceable in countless high-tech applications. However, their inherent brittleness tremendously limits the application range and, despite extensive research efforts, particularly short cracks are hard to combat. While local plasticity carried by mobile dislocations allows desirable toughness in metals, high bond strength is widely believed to hinder dislocation-based toughening of ceramics. Here, we demonstrate the possibility to induce and engineer a dislocation microstructure in ceramics that improves the crack tip toughness even though such toughening does not occur naturally after conventional processing. With modern microscopy and simulation techniques, we reveal key ingredients for successful engineering of dislocation-based toughness at ambient temperature. For many ceramics a dislocation-based plastic zone is not impossible due to some intrinsic property (e.g. bond strength) but limited by an engineerable quantity, i.e. the dislocation density. The impact of dislocation density is demonstrated in a surface near region and suggested to be transferrable to bulk ceramics. Unexpected potential in improving mechanical performance of ceramics could be realized with novel synthesis strategies.