General Self-Assembly Method for Deposition of Graphene Oxide into Uniform Close-Packed Monolayer Films.

Depositing a morphologically uniform monolayer film of graphene oxide (GO) single-layer sheets is an important step in the processing of many composites and devices. Conventional Langmuir-Blodgett (LB) deposition is often considered to give the highest degree of morphology control, but film microstructures still vary widely between GO samples. The main challenge is in the sensitive self-assembly of GO samples with different sheet sizes and degrees of oxidation. To overcome this drawback, here, we identify a general method that relies on robust assembly between GO and a cationic surfactant (cationic surfactant-assisted LB). We systematically compared conventional LB and cationic surfactant-assisted LB for three common GO samples of widely different sheet sizes and degrees of oxidation. Although conventional LB may occasionally provide satisfactory film morphology, cationic surfactant-assisted LB is general and allows deposition of films with tunable and uniform morphologies-ranging from close-packed to overlapping single layers-from all three types of GO samples investigated. Because cationic surfactant-assisted LB is robust and general, we expect this method to broaden and facilitate the use of GO in many applications where precise control over film morphology is crucial.

Palladium oxidation leads to methane combustion activity: Effects of particle size and alloying with platinum.

Pd- and Pt-based catalysts are highly studied materials due to their widespread use in emissions control catalysis. However, claims continue to vary regarding the active phase and oxidation state of the metals. Different conclusions have likely been reached due to the heterogeneous nature of such materials containing various metal nanoparticle sizes and compositions, which may each possess unique redox features. In this work, using uniform nanocrystal catalysts, we study the effect of particle size and alloying on redox properties of Pd-based catalysts and show their contribution to methane combustion activity using operando quick extended x-ray absorption fine structure measurements. Results demonstrate that for all studied Pd sizes (3 nm-16 nm), Pd oxidation directly precedes CH4 combustion to CO2, suggesting Pd oxidation as a prerequisite step to methane combustion, and an oxidation pretreatment shows equal or better catalysis than a reduction pretreatment. Results are then extended to uniform alloyed PtxPd1-x nanoparticles, where oxidative pretreatments are shown to enhance low-temperature combustion. In these uniform alloys, we observe a composition-dependent effect with Pt-rich alloys showing the maximum difference between oxidative and reductive pretreatments. In Pt-rich alloys, we initially observe that the presence of Pt maintains Pd in a lower-activity reduced state. However, with time on stream, PdO eventually segregates under oxidizing combustion conditions, leading to a slowly increasing activity. Overall, across particle sizes and alloy compositions, we relate increased catalytic activity to Pd oxidation, thus shedding light on previous contrasting results related to the methane combustion activity of these catalysts.

Synthesis of Colloidal Pd/Au Dilute Alloy Nanocrystals and Their Potential for Selective Catalytic Oxidations.

Selective oxidations are crucial for the creation of valuable chemical building blocks but often require expensive and unstable stoichiometric oxidants such as hydroperoxides and peracids. To date, many catalysts that contain a single type of active site have not been able to attain the desired level of selectivity for partially oxidized products over total combustion. However, catalysts containing multiple types of active sites have proven to be successful for selective reactions. One category of such catalysts is bimetallic alloys, in which catalytic activity and selectivity can be tuned by modifying the surface composition. Traditional catalyst synthesis methods using impregnation struggle to create catalysts with sufficient control over surface chemistry to accurately tune the ensemble size of the desired active sites. Here we describe the synthesis of colloidal nanocrystals of dilute alloys of palladium and gold. We show that when supported on titania (TiO2), tuning the composition of the Pd/Au nanocrystal surface provides a synergistic effect in the selective oxidation of 2-propanol to acetone in the presence of H2 and O2. In particular, we show that certain Pd/Au surface ratios exhibit activity and selectivity far superior to Pd or Au individually. Through precise structural characterization we demonstrate that isolated atoms of Pd exist in the most active catalysts. The synergy between isolated Pd atoms and Au allows for the formation of reactive oxidizing species, likely hydroperoxide groups, responsible for selective oxidation while limiting oxygen dissociation and, thus, complete combustion. This work opens the way to more efficient utilization of scarce noble metals and new options for catalyzed selective oxidations.

Langmuir-Blodgett Deposition of Graphene Oxide-Identifying Marangoni Flow as a Process that Fundamentally Limits Deposition Control.

Langmuir-Blodgett deposition is a popular route to produce thin films of graphene oxide for applications such as transparent conductors and biosensors. Unfortunately, film morphologies vary from sample to sample, often with undesirable characteristics such as folded sheets and patchwise depositions. In conventional Langmuir-Blodgett deposition of graphene oxide, alcohol (typically methanol) is used to spread the graphene oxide sheets onto an air-water interface before deposition onto substrates. Here we show that methanol gives rise to Marangoni flow, which fundamentally limits control over Langmuir-Blodgett depositions of graphene oxide. We directly identified the presence of Marangoni flow by using photography, and we evaluated depositions with atomic force microscopy and scanning electron microscopy. The disruptive effect of Marangoni flow was demonstrated by comparing conventional Langmuir-Blodgett depositions to depositions where Marangoni flow was suppressed by a surfactant. Because methanol is the standard spreading solvent for conventional Langmuir-Blodgett deposition of graphene oxide, Marangoni flow is a general problem and may partly explain the wide variety of undesirable film morphologies reported in the literature.

Systematic Identification of Promoters for Methane Oxidation Catalysts Using Size- and Composition-Controlled Pd-Based Bimetallic Nanocrystals.

Promoters enhance the performance of catalytic active phases by increasing rates, stability, and/or selectivity. The process of identifying promoters is in most cases empirical and relies on testing a broad range of catalysts prepared with the random deposition of active and promoter phases, typically with no fine control over their localization. This issue is particularly relevant in supported bimetallic systems, where two metals are codeposited onto high-surface area materials. We here report the use of colloidal bimetallic nanocrystals to produce catalysts where the active and promoter phases are colocalized to a fine extent. This strategy enables a systematic approach to study the promotional effects of several transition metals on palladium catalysts for methane oxidation. In order to achieve these goals, we demonstrate a single synthetic protocol to obtain uniform palladium-based bimetallic nanocrystals (PdM, M = V, Mn, Fe, Co, Ni, Zn, Sn, and potentially extendable to other metal combinations) with a wide variety of compositions and sizes based on high-temperature thermal decomposition of readily available precursors. Once the nanocrystals are supported onto oxide materials, thermal treatments in air cause segregation of the base metal oxide phase in close proximity to the Pd phase. We demonstrate that some metals (Fe, Co, and Sn) inhibit the sintering of the active Pd metal phase, while others (Ni and Zn) increase its intrinsic activity compared to a monometallic Pd catalyst. This procedure can be generalized to systematically investigate the promotional effects of metal and metal oxide phases for a variety of active metal-promoter combinations and catalytic reactions.