Changes in chemical profile of Cascade hop cones according to the growing area.

BACKGROUND: The growing area has a substantial effect on plants, affecting secondary metabolism. For hops, different authors have studied the effect of growing area on the chemical composition of cones with the aim of verifying and understanding the changes in hop characters. Despite the scant literature the subject receives increasing attention by brewers and hop growers. The present study aimed to characterize, using gas chromatography-mass spectrometry (GC-MS), and high-performance liquid chromatography with ultraviolet detection (HPLC-UV), cones of hop (Humulus lupulus L.) cultivar Cascade. Plant material was obtained from nine different areas of Italy and compared with Cascade samples grown in the United States, Germany and Slovenia. RESULTS: Differences in bitter acids and xanthohumol content were observed. Nevertheless, no correlation between bitter acids and xanthohumol production, on the one hand, and rainfall, temperatures and latitude, on the other hand, were observed in our samples. The Slovenia samples were richer in molecules that confer hoppy, woody and flower notes; USA2 samples were more characterized by woody, earthy, grassy and floral aroma, quite different characters if compared to USA1, which had the lowest presence of grassy aromatic compounds. In the Italian samples, TRENTINO was the genotype most characterized by limonene presence. CONCLUSION: The results of this study are indicative of the importance for hop users to know and characterize hops coming from different growing regions. The study pays special attention to the characterization of the differences in chemical characters of Cascade hop in Italy, where hop cultivation has developed only recently, but is in continuous expansion. © 2019 Society of Chemical Industry.

Fostering Circular Economy: Brewing By-Products as Innovative Ingredients for Cereal Bar Formulation.

Brewer's spent grain (BSG) was used as a sustainable and healthy ingredient in two cereal bar formulations, with honey (H) and chocolate (C) used as the binding systems' characterizing ingredients. The two bars, formulated using three levels of BSG (H1: 8.5%; H2: 12.7%; H3: 21.2%; C1: 3.9%; C2: 7.7%; C3: 15.5%) and stored for 20 days, were studied from a physicochemical perspective and compared to non-enriched control bars. The analysis showed that BSG enriched the bars with minerals, B vitamins, proteins, and fibers, meeting the required contents for the "high fiber" nutritional claim. Moisture content and water activity decreased with increasing BSG quantity and storage time. Higher BSG content increased flexibility in H bars after 7 days, while decreasing water content and increasing hardness in C bars at 1 storage day. Higher BSG levels darkened the samples' color with little change during storage. In addition, a consumer sensory test was conducted. The results showed that providing information on BSG had little impact on liking, purchase intent, and sensory perception. In addition, under blind conditions, H bars were considered more natural and healthier than the C bars; however, these differences were not significant in the informed conditions. This study shows the potential use of upcycled ingredients in cereal bars and highlights the central role of the sensory experience on consumer appreciation, considering also information provision.

The Effects of High-Pressure Processing Pre-Treatment on Apple Fruit for Juice Production.

One of the most difficult issues in the juice industry is to manufacture juices where processing processes minimise the impact on the native characteristics of the fruits. In this study, high-pressure technology was used on whole apple fruits in order to evaluate the effect on the juice production. Two varieties, cv. Limoncella and cv. Pink Lady, were considered. Preliminarily, the fruits were subjected to different pressures, and histological as well as pomological measurements were taken in order to identify the best treatment condition, which was established to be 600 MPa for 3 min. Juice samples were then characterised by measuring the colour, viscosity, total antioxidant capacity (TAC), and total phenolic content (TPC). The storage colour stability of the juices for both varieties showed not significant L* values between the untreated and pre-treated fruits. Juices obtained from pre-treated fruits had a viscosity significantly higher than that obtained from untreated ones. Interestingly, the TPC of high-pressure processing (HPP) pre-treated juice resulted in being significantly higher compared to the untreated ones. The HPP pre-treatment can be considered as a commercial application to modulate some quality standards for apple juice production.

Phytonutritional compounds and antioxidant activity of eight new edible flowers.

In the last years, special attention has been given to the nutritional properties of food, and the edible flowers (EFs) represent an uncommon fresh product to characterise, with the aim to explore new species with peculiar aesthetic and the aromatic features. This work investigated some nutritional properties of eight new EFs, such as Begonia boliviensis A.DC. (pink and white varieties), Dahlia pinnata Cav., Salvia farinacea Benth., S. × jamensis J.Compton, S. 'Purple Queen' Tulbaghia simmleri Beauv. 'Alba', T. violacea Harv. 'Alba', chosen for their different colours and corolla morphologies. Primary and secondary metabolites have been determined. The highest protein content was found in T. violacea 'Alba' and D. pinnata. The Salvia species showed the highest soluble sugar content. The two Tulbaghia species were notable for hexose and ascorbic acid content. D. pinnata showed the highest polyphenols, flavonoids and carotenoid content, with the highest antiradical activity.

Understanding the Impact of High-Pressure Treatment on Physico-Chemical, Microstructural, and Microbiological Aspects of Pumpkin Cubes.

In this study color, texture, starch-pectin, total antioxidant capacity, microbial count, and microstructure of HPP-treated Violina pumpkin cubes were evaluated. Samples were treated at six different pressures (100 to 600 MPa-HPP100 to HPP600) for 3 min. Moisture, total soluble solids, and pH showed no significant differences between untreated (UNTR) and treated samples. Pumpkin tissue showed great structural modifications as changes in cell size and shape, cell wall damage, increased cell wall thickness, cell detachment and dehydration, and calcium ions deposition mainly from HPP300 to 600. UNTR samples showed the highest value of maximum and minimum cell elongation, perimeter segment, and a more regular cell wall thickness whereas HPP600 showed the lowest values for all these parameters. A noticeable difference was observed in HPP600 samples, with a difference in terms of color (ΔE 11.3 ± 1.9) and hardness (87.4 ± 27.8 N) compared to the UNTR ones (194.9 ± 37.9 N) whereas treatments at other pressures changed less markedly the color and texture. HPP200 could ensure a higher amount of starch and pectin availability while HPP200 and HPP400 showed the highest total antioxidants capacity. High-pressure treatment from HPP400 to 600 gave the highest destruction of microorganisms but negatively influenced the structural quality as well as texture and microstructure.

From Hop to Beer: Influence of Different Organic Foliar Fertilisation Treatments on Hop Oil Profile and Derived Beers' Flavour.

Foliar fertilisation is known to influence the physiological response of Humulus lupulus (hop plants), but its effect on the flavour profile of beer still has to be investigated. By comparing the effects of four fertilisation treatments, this study aims at determining whether different foliar fertilisation treatments have a significant impact on hop plants' aromatic quality and that of the beer produced. Hop cones harvested from each experimental treatment were brewed to obtain five single dry-hopped beers, which were subsequently analysed. Gas chromatography-mass spectrometry (GC-MS) and electronic nose (Cyranose 320) analyses were performed on the hop cones, while headspace solid-phase microextraction-gas chromatography-mass spectrometry HS-SPME-GC-MS, electronic nose and sensory analyses were carried out on the beers produced. The analyses not only allowed for a differentiation between the hops from the four fertilisation treatments and the control but also enabled a differentiation between the beers produced for their identification. Sensory evaluation revealed consumer preferences regarding the dry-hopped beers analysed, evidencing their distinctive features, including significant differences in both aroma and flavour.

Biochar effects on early decomposition of standard litter in a European beech forest (northern Italy).

The release of biochar (BC) on forest soil is a strategy aimed at increasing carbon reserves and forest productivity. The effect of BC amendments on the decomposition of different quality litter is, however, poorly understood. With this study we investigate the effects of wood-derived BC applications on early decomposition in a European beech (Fagus sylvatica L.) forest through the burial of standard material, i.e. green tea and rooibos tea (high- and low-quality litter surrogates, respectively). Two main questions were addressed: 1) Do BC applications influence the decomposition of high- and low-quality standard litter and, if so, in what way? and 2) Does this effect (if measurable) depend on where the sample is placed with respect to the BC application layer? To test BC amendment effects, four application percentages were employed (0, 10, 20 and 100 %), after which standard litter mass loss was recorded. To investigate the effects of sample position, only three BC application percentages were used (0, 10 and 20 %), with teabags buried at three different depths - within the BC amended layer, between this layer and the unamended soil, and below the latter. Results show that early decomposition of high-quality standard litter was not influenced by BC applications, while a significant reduction in mass loss of low-quality standard litter was observed when the percentage of BC application was higher, specifically of litter within the 20 % and 100 % BC amended layers. Decomposition was also affected by sample position relative to the BC layer, exhibiting higher levels of mass loss when samples were placed within the BC amended layer. Overall, BC applications on beech forest soils not only seem to produce negligible effects on the early decomposition rate of high-quality standard litter, but such applications also seem to have the ability to reduce carbon loss following plant material degradation.

Characterization of the (Poly)Phenolic Fraction of Fig Peel: Comparison among Twelve Cultivars Harvested in Tuscany.

(1) Background: The fig tree (Ficus carica L.) is widely cultivated in the Mediterranean area and it produces fruits largely consumed in the Mediterranean diet. Previous studies have shown that this fruit represents a rich source of (poly)phenols, which are mainly located in the peel rather than the pulp. In our study, fig peel derived from twelve different cultivars located in Tuscany was assessed for its (poly)phenol profile. (2) Methods: The (poly)phenol characterization was performed through ultra-high performance liquid chromatography coupled to multiple-stage mass spectrometry. (3) Results: Twenty-eight (poly)phenolic compounds were quantified in the investigated fig peel. It was possible to observe an interesting variability in the (poly)phenol content among the twelve cultivars of fig peel. Rutin and 5-caffeoylquinic acid were the main compounds in the greenish fig peel, while cyanidin-3-O-rutinoside was the main component in the dark-violet fig peel. (4) Conclusions: fig peel could be used as a (poly)phenol-rich ingredient in several food products to increase the bioactive compound content of foods. Moreover, dark-violet peel could be considered potentially suitable as a natural food colorant.

Effects of Wood-Derived Biochar on Germination, Physiology, and Growth of European Beech (Fagus sylvatica L.) and Turkey Oak (Quercus cerris L.)

Biochar (BC) soil amendments could partially counteract soil carbon (C) stock decrease in broad-leaved forests in Italy; however, its effects on the growth of representative tree species­Fagus sylvatica L. and Quercus cerris L.­has not yet been addressed. We examine whether seed germination and growth of these species are affected by addition of BC obtained from deciduous broadleaf trees. Seeds were left to germinate in greenhouse conditions under three different BC amendments: 0% (control), 10% and 20% (v/v). Seedlings were then subjected to controlled conditions under the same BC percentage. Biochar effects on seed germination were assessed measuring germination time and percentage, while effects on photosynthesis were assessed using leaf chlorophyll content (mg/m2) and photosynthetic efficiency (FV/FM). Plant growth was estimated by recording leaf number, longest leaf length and plant height. Biochar treatments had no negative effects on germination and early growth stage of the two species. Positive effects were found on the chlorophyll content of both species (ca. +8%) regardless of the treatment and on the leaf number (+30%), leaf length (+14%) and plant height (+48%) of Q. cerris (only with 10% BC). Biochar applications seem, therefore, a suitable method for increasing broad-leaved forest C stock in Italy.

Impact of sustainability and nutritional messaging on Italian consumers' purchase intent of cereal bars made with brewery spent grains.

This work focuses on the reuse of brewery spent grains (BSGs), the most abundant by-product of the beer industry, today mainly used as animal feed. BSGs are rich in fibers and proteins as well as phenolic compounds, all of which are beneficial for human nutrition. Cereal bars containing 12% BSG were formulated and characterized instrumentally. Moreover, 159 panelists representative of young Italian consumers evaluated the bars in a central location test, along with a commercial cereal bar. Products were first evaluated blind, and then in an informed condition where additional product-specific nutritional and sustainability information was revealed, thus the purchase intent was determined. While the control product outperformed the BSG bar in most of the hedonic and sensory measures, the BSG sample was perceived as "natural/made with natural ingredients" by a significantly higher number of panelists (49%) compared to the control (30%). Additionally, even in the lower performing formulation, a significant positive effect on purchase intent was observed when providing either nutrition (fiber content) or sustainability (use of upcycled ingredients) information. The acceptable price range for the BSG and the commercial bar was very similar, whereas the optimal pricing point for the BSG was lower than the control. For the BSG product, sustainability information had significantly higher impact on purchase intent than nutrition-based information. Results highlight the importance of understanding consumer attitudes toward upcycling and the use of byproducts as ingredients in new food formulations. PRACTICAL APPLICATION: Results show how providing information on product nutrition and sustainability can increase purchase intent in the context of a cereal bar containing upcycled ingredients. The findings of this study can help food and consumer researchers to develop acceptable products that include BSG as an ingredient, potentially replacing other cereals in the recipe. The use of this brewery by-product could add value to the beer supply chain and to the final product as well, being also aligned with the current market trend of sustainability and functional health benefits.

Impact of Ohmic Heating and High Pressure Processing on Qualitative Attributes of Ohmic Treated Peach Cubes in Syrup.

Stabilization of ohmic pretreated peach cubes (ohm) in syrup, representative of semifinished fruit products, was finalized by ohmic heating (OHM) and high pressure processing (HPP), proposed respectively as thermal and nonthermal pasteurization, in comparison to a conventional pasteurization treatment (DIM). The samples were then studied in terms of histological, physical (dimensional distribution, tenderometry, texture, viscosity of syrup and colour), chemical (total phenolic and ascorbic acid content), and sensorial (triangle test) properties. Severe modifications of the cell walls were observed in ohm-DIM and ohm-OHM samples, with swelling and electroporation, respectively. From chemical analyses, significant reduction of ascorbic acid and simultaneous increase of total phenolics content were observed for ohm-DIM and ohm-OHM, probably in relation to the cell wall damages. ohm-HPP showed the best preservation of the dimensional characteristics and hardness, followed by ohm-OHM and ohm-DIM. In addition, textural and colour parameters evidenced similar results, with ohm-HPP as the less different from ohm. Finally, the sensorial analysis confirmed ohm-HPP and ohm-OHM samples as the most similar to ohm as well as the most appreciated in terms of colour and consistency.

Effect of different atmospheric and subatmospheric cooking techniques on qualitative properties and microstructure of artichoke heads.

Quartered Violetto artichokes were cooked with different treatments (boiling, steaming, sous vide and vacuum cooking) at the same cooking value at the thermal centre. Then, the physical (moisture content, texture and colour), histological and chemical (phenolic, 5-hydroxymethylfurfural (HMF) and furan content, total antioxidant capacity) features of bracts and hearts were assessed. A deeply modified microstructure was observed in boiled and steamed samples with an evident decrease in hardness both for bracts and hearts. Lightness of two anatomical parts was decreased by all the treatments (with the exception of sous vide bracts). The highest total colour difference was recorded for steamed samples, whereas the lowest was noted for sous vide samples. Steamed and sous vide artichoke exhibited the highest total phenolic content and total antioxidant capacity. Sous vide samples exhibited the highest concentrations of HMF, 2-furan-methanol and 2,4-dihydroxy-2,5-dimetyl-3(2H)-furanone, whereas the by-product 5-metylfuraldheide was only detected in the steamed product.

Effects of high hydrostatic pressure on physico-chemical and structural properties of two pumpkin species.

The effects of high pressure treatments (200, 400, 600 MPa for 5 min) and a thermal treatment (85 °C for 5 min) were evaluated on cubes of two pumpkin species (Cucurbita maxima L. var. Delica and Cucurbita moschata Duchesne var. Butternut) up to 2 months of refrigerated storage. Increasing the pressure, small parenchyma cells from the pumpkin tissue exhibited collapses and separations, especially for Butternut. This species showed a lower hardness than Delica at time 0. For both species, 400 MPa and thermal treatment were the most effective in the inactivation of pectinmethylesterase, which reactivated after 2 months, especially for Butternut. Colorimetric parameters decreased after all treatments. Antioxidant activity resulted affected by pressure, showing a significant increase during storage especially for the samples treated at 200 MPa after 2 months, comparable to the thermal treated ones. Among the tested treatments, 400 MPa may be considered as the best option for the quality retention during storage.

Improved Physicochemical and Structural Properties of Blueberries by High Hydrostatic Pressure Processing.

The use of high pressure on fruits and vegetables is today widely studied as an alternative to the traditional thermal preservation techniques, with the aim of better preserving nutritional and organoleptic properties. The use of high hydrostatic pressures (400-600 MPa; 1-5 min; room temperature) was tested on the physicochemical and structural properties of blueberries, in comparison to raw and blanched samples. High hydrostatic pressures led to higher tissue damages than blanching, related to the intensity of the treatment. The cellular damages resulted in leakage of intracellular components, such as bioactive molecules and enzymes. As a consequence, among the high pressure treatments, the resulting antioxidant activity was higher for samples treated for longer times (5 min). Pectinmethyl esterase (PME), deactivated by blanching, but strongly barotolerant, was more active in blueberries treated with the more intense high pressure conditions. Blueberry texture was better retained after high pressure than blanching, probably because of the PME effect. Blueberry color shifted towards purple tones after all of the treatments, which was more affected by blanching. Principal component analysis revealed the mild impact of high pressure treatments on the organoleptic properties of blueberries.

Development of a new high-performance liquid chromatography method with diode array and electrospray ionization-mass spectrometry detection for the metabolite fingerprinting of bioactive compounds in Humulus lupulus L.

The study was aimed at developing a new analytical method for the metabolite fingerprinting of bioactive compounds in Humulus lupulus L. (hop), together with a simple extraction procedure. Different extraction techniques, including maceration, heat reflux extraction (HRE), ultrasound-assisted extraction (UAE) and microwave-assisted extraction (MAE), were compared in order to obtain a high yield of the target analytes. Dynamic maceration for 30min with MeOH-HCOOH (99:1, v/v) as the extraction solvent provided the best result in terms of recovery of secondary metabolites. The analysis of hop constituents, including prenylflavonoids and prenylphloroglucinols (bitter acids), was carried out by means of HPLC-UV/DAD, HPLC-ESI-MS and MS(2), using an ion trap mass analyzer. An Ascentis Express C18 column (150mm×3.0mm I.D., 2.7µm) was used for the HPLC analysis, with a mobile phase composed of 0.25% formic acid in both water and acetonitrile, under gradient elution. The method validation was performed to show compliance with ICH guidelines. The validated technique was successfully applied to the phytochemical analysis of ten commercial cultivars and twenty-three wild Italian hop genotypes, thus demonstrating to be a reliable and useful tool for the comprehensive multi-component analysis of hop secondary metabolites.