The European Portuguese Version of the Brief Negative Symptom Scale.

Negative symptoms reflect a currently much-untreated loss of normal functioning and are frequently found in psychotic disorders. We present the first translation of the Brief Negative Symptom Scale (BNSS) to European Portuguese and evaluate its validity in a sample of Portuguese male patients with a psychotic spectrum disorder. The Portuguese BNSS showed excellent internal consistency, high convergent validity (i.e., strong correlation with the PANSS negative factor), and high discriminant validity (i.e., a lack of association with the PANSS positive factor). In sum, the present European Portuguese BNSS has shown to be reliable, thus extending this instrument's clinical availability worldwide.

Morphological and immunohistochemical characteristics of diffuse seminoma in horses: A case report.

The present study describes the morphological and immunohistochemical characteristics of a case of diffuse seminoma in a 16-year-old male mixed-breed horse. According to the owner, the animal's left testicle had been gradually increasing in size over a period of 2 months. On palpation, the testicle had a firm consistency, with no sensitivity to digital pressure, was adhered to the scrotum and measuring 16 cm × 8 cm. In the ultrasound examination, it presented a heterogeneous texture and areas of hypoechogenic echogenicity without visualization of the mediastinum. Therefore, the bilateral orchiectomy was performed. After the surgical procedure, it was found that the affected testicle presented a firm mass measuring 9 cm × 7 cm × 3.5 cm. Histologically, a multilobulated, non-encapsulated and invasive tumour mass was found, which replaced the seminiferous tubules, consisting of polygonal cells arranged in a mantle that varied from cohesive to loosely cohesive, supported by a scarce fibrous stroma. In the immunohistochemical examination, the neoplastic cells showed positive immunolabelling for OCT4 and C-KIT. In this report, the physical examination combined with the ultrasonographic examination were fundamental to the therapeutic management of the case, and the final diagnosis was made after histopathological and immunohistochemical tests.

Fly and treat: Endovascular treatment of ruptured aneurysms at an insular tertiary center.

(Objectives) Aneurysmal subarachnoid hemorrhage (aSAH) is a life-threatening condition associated with poor outcomes. Early intervention is critical, particularly in low-volume hospitals, which are advised to transfer aSAH patients to high-volume centers. This study examines a novel protocol implemented in 2016 at Região Autónoma da Madeira, a Portuguese island. It involves the mobilization of experienced neurointerventionalists from high-volume hospitals to provide aSAH treatment. (Methods) We conducted a retrospective analysis on 30 aSAH patients who underwent endovascular treatment at the island center between November 2016 and April 2022. Additionally, we included a comparison group of 74 aSAH patients, treated with the endovascular approach at Hospital de Braga (high volume center at Portugal mainland). (Results) There was no statistical difference in patients' clinical severity between both hospitals (median WFNS score of 1). Although 90 % of patients in the novel protocol group received treatment within 3 days, we observed a significant delay compared to Hospital de Braga. Rates of aneurysm occlusion and intra-procedure complications between the two groups were similar. At the 3-months follow-up, there were no statistically significant differences between groups regarding patients that achieved a modified Rankin score of 2 or less. However, the island center exhibited a significantly higher mortality rate. (Conclusions) Overall, our results suggest that making the neurointerventionalist fly to an insular center is feasible and allows most patients to be treated within the first 72 h, as recommended. We highlight some potential recommendations for implementing this model and discuss possible causes that might justify the high mortality rate.

Partially Edentulous Arches: A 5-Year Survey of Patients Treated at the Fluminense Federal University Removable Prosthodontics Clinics in Brazil.

PURPOSE: This study investigated the number and Kennedy Classification of the edentulous arches in patients treated at the Removable Partial Denture (RPD) Clinics of the Fluminense Federal University School of Dentistry (FO-UFF) in Rio de Janeiro, Brazil, from 2005 to 2010. MATERIALS AND METHODS: A cross-sectional retrospective survey was conducted on patient record charts to identify gender, age, number, and location of the edentulous arches, and Kennedy Class type. RESULTS: One hundred and forty-six patients were analyzed for this study (96 [65.8%] women and 50 [34.2%] men). Two hundred and ninety-two arches were analyzed: 74 arches (25%) were found with intact dentitions, 18 (6.1%) were edentulous arches, and 200 (68.8%) were partially edentulous arches. Ninety-one patients (62.3%) needed oral rehabilitation with RPDs on one arch and 55 (37.7%) in both arches. One hundred and eight (53.2%) partially edentulous mandibles and 92 (46.8%) partially edentulous maxillae were found. Kennedy Class I was more frequent in the mandibular arch (58 patients; 29%) whereas Kennedy Class III was more frequent in the maxillary arch (40 patients; 20%). Patients aged between 51 and 60 years presented the highest percentage of partially edentulous arches (33.6%). CONCLUSION: Mandibular Kennedy Class I and maxillary Kennedy Class III presented the highest frequency in patients treated at the FO-UFF. These results are in agreement with previous studies that evaluated the different Kennedy classes in partially edentulous arches.

Streptococcus pyogenes Meningitis in a Pediatric Patient: Case Report.

Streptococcus pyogenes causes a wide spectrum of diseases in children. However, meningitis due to this pathogen is highly uncommon. Although rare, it is associated with a high case fatality rate and can result in severe neurological sequelae. We report a case of Streptococcus pyogenes meningitis in a previously healthy 3-year-old boy. The purpose of this case report is to emphasize that this agent should be considered a cause of meningitis in previously healthy infants because of its frequent association with complications, sequelae, and high mortality rates.

Cerebral Tuberculosis After Therapy With Adalimumab for Hidradenitis Suppurativa: A Rare Case.

Hidradenitis suppurativa (HS) is a chronic inflammatory skin disease with limited therapeutic options. Adalimumab, an anti-tumor necrosis factor-alpha (TNF-α) monoclonal antibody, was the first biological agent approved for the treatment of moderate to severe HS. Tuberculosis (TB) is a highly prevalent global public health problem, affecting individuals worldwide. Continuous immunosuppression from TNF-α treatment increases the risk of TB development. Isolated neurotuberculosis, in the absence of other symptoms, emerges as a rarely observed infection pattern in such patients. We present a case of a 23-year-old woman with severe HS undergoing treatment with adalimumab. After two years, she developed a pronounced occipital tension headache, constant nausea, and persistent fever. The patient's latent TB status was unknown without annual screening. Subsequent magnetic resonance imaging revealed a lesion in the cerebellar vermis. Immunosuppressive therapy was suspended and an etiological study was conducted; the only positive result was the interferon-gamma release assay. Empirically, antituberculosis treatment and prednisolone were initiated, leading to clinical and neurological improvement. After one year of treatment, symptoms resolved without neurological sequelae. This case highlights the importance of vigilant monitoring before, during, and after immunosuppressive treatment. Early recognition, discontinuation of anti-tumor necrosis factor medications, and appropriate management of TB are crucial to prevent complications.

An exploration of blood-based biomarkers of negative symptoms of psychosis in men.

Negative symptoms in the context of psychosis are still poorly understood and diagnosed, which impairs the treatment efficacy of current therapies and patient's integration in society. In this study, we aimed to test hypothesis-based and exploratory associations of negative symptom domains, as defined by the Brief Negative Symptom Scale (BNSS), with hormonal and hematological variables, and, complementarily, with standard psychological/cognitive and psychopathological measures. Fifty-one male patients diagnosed with a psychotic disorder underwent a structured interview and blood collection. Standard Spearmen bivariate correlations were used for data analysis. We obtained evidence of hypothesis-based associations between specific negative symptoms and oxytocin, thyroid stimulating hormone levels and neutrophil-to-lymphocyte ratio; as well as novel and hypothesis-free associations with erythrocyte and lymphocyte count, mean corpuscular volume and red cell distribution width. Complementarily, we also obtained some validation of previous associations of negative symptoms with illness resolution, cognitive symptom severity and social performance, and a novel association with anger contagion. We hope our results can generate new hypotheses in psychosis research. Our work suggests further avenues in research on erythrocytic, inflammatory, thyroid and oxytocin-related markers and abnormalities in psychosis, especially in regards to specific negative symptoms, towards more precise and comprehensive etiological, diagnostic and therapeutic models.

Conversion of a classical microbiology laboratory to a total automation laboratory enhanced by the application of lean principles.

Laboratory automation in microbiology improves productivity and reduces sample turnaround times (TATs). However, its full potential can be unlocked through the optimization of workflows by adopting lean principles. This study aimed to explore the relative impact of laboratory automation and continuous improvement events (CIEs) on productivity and TATs. Laboratory automation took place in November 2020 and consisted of the introduction of WASPLab and VITEK MS systems. CIEs were run in May and September 2021. Before the conversion, the laboratory processed about ~492 samples on weekdays and had 10 full-time equivalent (FTE) staff for a productivity of 49 samples/FTE/day. In March 2021, after laboratory automation, the caseload went up to ~621 while the FTEs decreased to 8.5, accounting for productivity improvement to 73 samples/FTE/day. The hypothetical productivity went up to 110 samples/FTE/day following CIEs, meaning that the laboratory could at that point deal with a caseload increase to ~935 with unchanged FTEs. Laboratory conversion also led to an improvement in TATs for all sample types. For vaginal swabs and urine samples, median TATs decreased from 70.3 h [interquartile range (IQR): 63.5-93.1] and 73.7 h (IQR: 35.6-50.7) to 48.2 h (IQR: 44.8-67.7) and 40.0 h (IQR: 35.6-50.7), respectively. Automation alone was responsible for 37.2% and 75.8% of TAT reduction, respectively, while the remaining reduction of 62.8% and 24.2%, respectively, was achieved due to CIEs. The laboratory reached productivity and TAT goals predefined by the management after CIEs. In conclusion, automation substantially improved productivity and TATs, while the subsequent implementation of lean management further unlocked the potential of laboratory automation.IMPORTANCEIn this study, we combined total laboratory automation with lean management to show that appropriate laboratory work organization enhanced the benefit of the automation and substantially contributed to productivity improvements. Globally, the rapid availability of accurate results in the setting of a clinical microbiology laboratory is part of patient-centered approaches to treat infections and helps the implementation of antibiotic stewardship programs backed by the World Health Organization. Locally, from the point of view of laboratory management, it is important to find ways of maximizing the benefits of the use of technology, as total laboratory automation is an expensive investment.

Skene's gland duct cyst: three cases in female newborns.

Skene's gland duct cysts are benign, asymptomatic bulging interlabial masses that are rarely identified in female newborns. The aetiology is unknown, but it is commonly associated with in utero maternal oestrogen exposure or obstruction or stenosis of the gland duct. We report three unrelated cases of neonatal Skene's gland duct cysts that resolved spontaneously without the need for surgical intervention.

Electron Beam Irradiation on the Production of a Si- and Zr-Based Hybrid Material: A Study by FTIR and WDXRF.

Sol-gel production of hybrid materials has, to some extent, revolutionised materials' engineering and the way science and technology perceive the creation of new materials. Despite that, the method presents some limitations that are circumvented by radiation processing. Electron beam irradiation was used to promote synthesis of hybrid structures while using silanol-terminated PDMS, TEOS and TPOZ as precursors. Evaluation of the method's performance was executed by gel fraction determination, WDXRF and FTIR-ATR. Results showed that, although there is some pre-irradiation reactivity between precursors, radiolysis induces scission on multiple sites of precursor's structures, which induces hybrid network formation to a greater extent. Characterisation allowed determining electron beam irradiation to be effective in the creation of Si-O-Zr bonds, resulting in the production of a Class II hybrid material.

Imaging of intraspinal cystic lesions: A review.

Several distinct conditions present as cystic or pseudocystic lesions within the spinal canal. Some of the most common spinal cystic lesions include spinal meningeal cysts, juxtafacet cysts, dermoid/epidermoid cysts, nerve sheath tumors, and syringohydromyelia. Clinical presentation is usually nonspecific and imaging characteristics are frequently overlapping, which may pose a challenging presurgical diagnosis. We provide a pictorial review of cystic intraspinal lesions and discuss the main imaging features that can aid the neuroradiologist in the differential diagnosis. First, we propose a categorization of the lesions according to their location as extradural, intradural extramedullary, and intramedullary. This is a crucial initial step in the diagnostic workup and surgical planning. Second, for each of these locations, we organize the lesions according to their etiology: congenital and developmental disorders, degenerative disorders, traumatic or postsurgical collections, infectious conditions, neoplastic lesions, and other miscellaneous disorders. Finally, we summarize the clinical highlights and MR features that provide important insights for the differential diagnosis. MR is the technique of choice in presurgical evaluation and postsurgery follow-up. It provides accurate lesion localization and characterization and, most of the times, it will allow a confident differential diagnosis. High-resolution three-dimensional T2-weighted sequences and diffusion-weighted imaging can provide important hints in specific cases. Signal correlation with T1-weighted and fat-saturated sequences allows to differentiate true cystic lesions from hemorrhage or fat tissue.

A guide to post-mortem examination procedure in mouse models.

The main objective of a post mortem is to identify, at a macroscopic level, any anatomical features that characterise mutant or sick mice and to describe lesions contributing to morbidity and mortality. Tissues collected for subsequent examination require appropriate handling and preservation to prevent deterioration. Therefore, efficient routine procedures are essential to facilitate histology and to ensure high-quality samples. In addition, optimised techniques minimise data loss from damaged samples reducing the numbers of animals used and supporting the 3Rs principle of reduction. Here, we describe an optimised method for tissue collection in the mouse. Training tips and points for caution are included.

Young People Awareness of Sexually Transmitted Diseases and Contraception: A Portuguese Population-Based Cross-Sectional Study.

Adolescents and young adults are an important target concerning reducing health-risk behavior adoption, including sexual health. Studying their knowledge concerning sexuality and their main counsellors, can be an important step in targeting an updated health promotion approach. This study characterized adolescents and young adults' knowledge and attitudes about sexually transmitted diseases (STDs), and contraception, prospecting for their main trusted counseling sources. We conducted a cross-sectional, population-based, self-report survey of 746 individuals aged between 14 and 24 years from Paredes, Portugal. The questionnaire included many dimensions, as demographic characteristics, youth behavior, currently sexually active status, main counselors concerning health topics, awareness, and knowledge about STDs and contraception. Mean age of the participants was 18.3 years, 50.5% of them had started their sexual activity. Males present themselves as more sexually active, starting earlier, and have more sexual partners than females. Participants reported an adequate knowledge perception about STDs and contraception methods, however we found different patterns on specific STDs and contraceptive methods, according to gender, age, and sexually active status. Our results help design specific interventions to reach youth, community, and healthcare providers, pointing out the value of bringing people to the center of health policies.

TEOS Nanocomposites for the Consolidation of Carbonate Stone: The Effect of Nano-HAp and Nano-SiO2 Modifiers.

This study aimed at evaluating the effect of hydroxyapatite (HAp) nanosized structures and nanoparticles of hydrophilic silica as modifiers of both acid- and alkaline-catalysed tetraethoxysilane (TEOS)-based products for the consolidation of carbonate stones. Their initial effectiveness and some compatibility aspects were assessed in a porous limestone (sound and artificially aged Ançã stone samples) and two types of treatment (capillary absorption and brushing). The studied products were examined by scanning electron microscopy (SEM) and micro-Raman spectroscopy. Their depth of penetration and strengthening effect were evaluated through drilling resistance. Their action on the substrate was also further assessed by non-destructive methods based on colour variation and Shore-D hardness. Treated stone samples were dissimilarly affected by the tested treatments and exhibited a significant increase in strength with a low risk of over-strengthening. Adequate in-depth penetration patterns, as well as colour compatibility with the substrate were obtained with some of the prepared formulations through two types of treatment, both in sound and aged stone samples. The potential most effective treatments with the lowest colour change were obtained with the acid-catalysed TEOS-based products modified with HAp nanosized structures.

Evaluation of ImageJ software in ultrasonic image analysis: Follicular and luteal morphological characteristics of cattle.

This study was conducted to compare the effectiveness of two methodologies in evaluating B- and Doppler-mode ultrasonic images: analysis using ultrasonic software and utilizing a computer with ImageJ software. To determine if ImageJ software utilization is an efficacious alternative to ultrasonic software device- analysis, there were comparisons of values when using the two methods for morphological and vascular characteristics of follicular dynamics and luteal function in 18 crossbred cattle. From day 8 of an ovarian dynamics synchronization treatment regimen period until the time of ovulation (Day 10), B-mode and power-flow ultrasonic cineloops were obtained every 12 h to assess follicular diameter, wall area, and wall blood perfusion area. On Day 14 after ovulation, US cineloops of ovaries were obtained in B mode and power flow to evaluate various morphological and vascular characteristics of the corpus luteum (CL), including luteal diameter, luteal area, and CL blood perfusion area. Cineloops were evaluated and analyzed using ultrasonic software, and in a computer with ImageJ software. To evaluate consistency in results between the two methods, there was evaluation utilizing paired t-test, Pearson correlation coefficient, Bland-Altman plot, and Linear Regression Test procedures to calculate proportion of bias between values for measurements of variables evaluated. Results indicated none of the values for variables before and after ovulation differed (P > 0.05). It, therefore, was concluded that utilization of ImageJ software is an efficacious biomedical technique to analyze ultrasonic images of morphological and vascular characteristics before and after ovulation in cattle.

Influence of strain rate on the mechanical behavior of dry and hydrated chitosan-based dense materials for bioabsorbable implant applications.

Chitosan has generated enormous interest in the scientific community because of its distinctive biological and physicochemical properties, which allow new advanced structures and applications. Porous chitosan scaffolds have been extensively studied and explored in bone generation, however it is still a challenge to obtain bioabsorbable orthopedic implants that involves pure 3D dense chitosan geometries due to the inherent difficulties in producing and shaping such structures. In this work, chitosan was blended with 10% glycerol and 10% glycerol + 10% biphasic mixture of calcium phosphate (70% hydroxyapatite with 30% ß-tricalcium phosphate) to produce dense chitosan-based blocks, which were then shaped into rods. The introduction of plasticizer aimed to improve the materials ductility while the ceramic particles were used to increase stiffness and strength. The mechanical behavior of the two chitosan-based compositions was evaluated by uniaxial compression tests using a customized split-Hopkinson pressure bar (SHPB). The specimens were analysed in quasi-static conditions (less than 0.1 s-1) and medium strain rate conditions (200-800 s-1), both in dry state and in different hydrated conditions, in the latter case to approximate the in vivo implant conditions. The results showed promising results for the intended application. The chitosan blends present excellent ductility with an elastic perfect-plastic behavior in quasi-static conditions, with yield stresses around 40 MPa for the dry state, with a decay for 3 MPa after 48h hydration. An empirical model was proposed to describe the flow stress curves, with a good agreement with the experimental data, allowing future modelling of this material behavior.

Regeneration of critical-sized defects, in a goat model, using a dextrin-based hydrogel associated with granular synthetic bone substitute.

The development of injectable bone substitutes (IBS) have obtained great importance in the bone regeneration field, as a strategy to reach hardly accessible defects using minimally invasive techniques and able to fit to irregular topographies. In this scenario, the association of injectable hydrogels and bone graft granules is emerging as a well-established trend. Particularly, in situ forming hydrogels have arisen as a new IBS generation. An in situ forming and injectable dextrin-based hydrogel (HG) was developed, aiming to act as a carrier of granular bone substitutes and bioactive agents. In this work, the HG was associated to a granular bone substitute (Bonelike®) and implanted in goat critical-sized calvarial defects (14 mm) for 3, 6 and 12 weeks. The results showed that HG improved the handling properties of the Bonelike® granules and did not affect its osteoconductive features, neither impairing the bone regeneration process. Human multipotent mesenchymal stromal cells from the umbilical cord, extracellular matrix hydrolysates and the pro-angiogenic peptide LLKKK18 were also combined with the IBS. These bioactive agents did not enhance the new bone formation significantly under the conditions tested, according to micro-computed tomography and histological analysis.

Strategy to improve the mechanical properties of bioabsorbable materials based on chitosan for orthopedic fixation applications.

Bioabsorbable polymeric fixation devices have been used as an alternative to metallic implants in orthopedics, preventing the stress shielding effect and avoiding a second surgery for implant removal. However, several problems are still associated with current bioabsorbable implants, including the limited mechanical stiffness and strength, and the adverse tissue reactions generated. To minimize or even eliminate the problems associated with these implants, strategies have been developed to synthesize new implant materials based on chitosan. To overcome the brittle behavior of most 3D chitosan-based structures, glycerol and sorbitol were blended to chitosan and the effect of these plasticizers in the produced specimens was analyzed by flexural tests, Berkovich tests, scanning electron microscopy (SEM) and micro-CT analyzes. The improvement of the mechanical properties was also tested by adding ceramics, namely hydroxyapatite powder and biphasic mixtures of hydroxyapatite (HA) and beta-tricalcium phosphate (ß-TCP). In the plasticizers group, the best combination of the measured properties was obtained for chitosan with 10% glycerol (flexural strength of 53.8 MPa and indentation hardness of 19.4 kgf/mm2), while in the ceramics group the best mechanical behavior was obtained for chitosan with 10% HA+ß-TCP powder (flexural strength of 67.5 MPa and indentation hardness 28.2 kgf/mm2). All the tested material compositions were dense and homogeneous, fundamental condition for a good implant performance. These are encouraging results, which support the continued development of chitosan-based materials for orthopedic fixation applications.

Development of a screening questionnaire for the study of food allergy in adults.

BACKGROUND & AIMS: As far as we know, no screening questionnaire has been developed and validated for identification of adverse food reactions in Portuguese-speaking adults, as an initial approach towards the investigation of cases of possible food allergy. Thus, the objective of this study was to develop and validate a screening questionnaire of food allergy in adult Portuguese-speaking patients. METHODS: This was a multicentre, cross-sectional study using a simple random sample of 186 adults between 18 and 82 years old from various parts of the centre of Portugal. Intelligibility of the questionnaire was first assessed in 24 patients with confirmed IgE- or non-IgE-mediated food allergy, and in 24 volunteers without food allergies. The 17-item questionnaire was subsequently applied by phone to 78 food allergic patients (66 IgE-mediated and 12 non-IgE mediated) and to 60 non-food allergic volunteers, with subsequent reassessment (re-test). Face and content validity, intelligibility, construct validity, and test-retest reliability (temporal stability) were analysed. RESULTS: Face and content validity allowed item reduction from 30 to 17 items with adequate content validity index >0.78. Construct validity was confirmed in the 66 confirmed IgE-mediated food allergic patients, 12 non-IgE-mediated food allergic patients, and 60 non-allergic patients. Test-Retest Reliability (general temporal stability) of the test had a Spearman correlation coefficient value of 0.845 for the retest. Cohen's Kappa values for the relevant questions were greater than 0.890 for almost all items. No differences were found when sex, age, and volunteers' recruitment origin were analysed. An inverse relationship was found between reliability and retest time interval. CONCLUSIONS: Due to the quick and easy implementation, confirmation of face, content and construct validity as well as high temporal reproducibility, this screening questionnaire may be a useful study tool for an initial approach to detection of food allergies in adults.