Experience with guidelines for wastewater characterisation in The Netherlands.

In this paper experiences and results are presented with guidelines for wastewater characterisation that are standardised in The Netherlands for modelling purposes with ASM. The wastewater characterisation is based on a physical-chemical method to characterise the soluble and particulate fractions, combined with a BOD-analysis for characterising the biodegradable fraction of the influent COD. By following the guidelines, a sufficiently detailed and practical characterisation is obtained, and the results can be used for simulation studies on treatment plants for process optimisation, trouble-shooting and design assistance. At present, five years of experience is gained with the guidelines and they were used for the simulation of circa 100 treatment plants. The guidelines are evaluated as simple and easy to implement in routine analysis programs.

A practical protocol for dynamic modelling of activated sludge systems.

Use of dynamic simulation models has become standard practice in The Netherlands. Since the introduction around 5 years ago more then 100 full scale wastewater treatment plants have been modelled. Initially very different approaches have been used varying in calibration approach, amount of sampling and time investment. Based on the accumulated practical experiences the Dutch Foundation of Applied Water Research STOWA has stimulated the development of a protocol to aid in the set-up and calibration of models for full scale wastewater treatment plants. Herein the aim was to develop a protocol, which in practice was easy to use, minimising time and costs effort, but give a reliable and useable method. In this paper this protocol is briefly described.