Modulation of Electronic Availability in g-C3N4 Using Nickel (II), Manganese (II), and Copper (II) to Enhance the Disinfection and Photocatalytic Properties.

Carbon nitrides can form coordination compounds or metallic oxides in the presence of transition metals, depending on the reaction conditions. By adjusting the pH to basic levels for mild synthesis with metals, composites like g-C3N4-M(OH)x (where M represents metals) were obtained for nickel (II) and manganese (II), while copper (II) yielded coordination compounds such as Cu-g-C3N4. These materials underwent spectroscopic and electrochemical characterization, revealing their photocatalytic potential to generate superoxide anion radicals-a feature consistent across all metals. Notably, the copper coordination compound also produced significant hydroxyl radicals. Leveraging this catalytic advantage, with band gap energy in the visible region, all compounds were activated to disinfect E. coli bacteria, achieving total disinfection with Cu-g-C3N4. The textural properties influence the catalytic performance, with copper's stabilization as a coordination compound enabling more efficient activity compared to the other metals. Additionally, the determination of radicals generated under light in the presence of dicloxacillin supported the proposed mechanism and highlighted the potential for degrading organic molecules with this new material, alongside its disinfectant properties.

Impact of SARS-CoV-2 viral load and duration of symptoms before hospital admission on the mortality of hospitalized COVID-19 patients.

PURPOSE: Assess the impact of viral load estimated by cycle threshold (Ct) of reverse transcription real time-polymerase chain reaction (rRT-PCR) and the days from symptoms onset on mortality in hospitalized patients with COVID19. METHODS: Retrospective observational study of 782 patients with a positive rRT-PCR from a nasopharyngeal swab was performed within the first 24 h from admission. Demographic data, clinical manifestations and laboratory parameters were collected. Uni- and multivariate analyses were performed to identify factors associated with mortality at 60 days. RESULTS: Ct was divided into three groups and the mortality rate decreased from 27.3 to 20.7% and 9.8% for Ct values of ≤ 20, 21-25 and > 25, respectively (P = 0.0001). The multivariate analysis identified as predictors of mortality, a Ct value < 20 (OR 3.13, CI 95% 1.38-7.10), between 21-25 (OR 2.47, CI 95% 1.32-4.64) with respect to a Ct value > 25. Days from symptoms onset is a variable associated with mortality as well (DSOA) ≤ 6 (OR 1.86, CI 95% 1.00-3.46), among other factors. Patients requiring hospital admission within 6 DSOA with a Ct value ≤ 25 had the highest mortality rate (28%). CONCLUSIONS: The inclusion of Ct values and DSOA in the characterization of study populations could be a useful tool to evaluate the efficacy of antivirals.

Physicochemical properties and functional characteristics of ultrasound-assisted legume-protein isolates: a comparative study.

Sonicated protein isolates were recovered from Chenopodium quinua, Phaseoulus vulgaris and Lens culinaris to develop a functional matrix by assessing the physicochemical and functional properties. The plant protein isolates were prepared from powdered materials followed by sonication in alkaline medium using a Box-Behnken design. pH (6-10), a buffer-to-material ratio (5:1 to 15:1) and sonication time (0-20 min) were taken as independent variables, whereas protein yield was taken as the dependent variable. A pH of 9, 20 min treatment, and a buffer-to-material ratio of 5:1 were the optimal extraction conditions for quinoa and black beans, whereas a 1:10 ratio was suitable for lentils. Sonication in alkaline medium caused partial protein unfolding and these isolates; in turn, the molecular weight affected the emulsifying activity and stability. Moreover, sonication had a strong effect on the gelation temperature, emulsifying activity, the water, and oil sorption. Sonication improved protein yield and exposed amino acids such as glutamic acid, aspartic acid, leucine and glycine. In turn, thiol groups were responsible for the increased in gelation temperature. The better gelling property coupled with high emulsifying property of these proteins show potential application as protein emulsifiers in the production of gels, sausages, and pet foods.

Lipidic Matrixes Containing Clove Essential Oil: Biological Activity, Microstructural and Textural Studies.

Clove essential oil (CEO) is known for having excellent antioxidant and antimicrobial properties, but the poor stability of its components to light and temperature compromise this activity. The aim of this study is to evaluate the textural, antioxidant, antimicrobial and microstructural properties of matrixes produced with representative natural waxes and CEO. Thus, waxy emulsifiers, such as beeswax, candelilla wax, carnauba wax, and ozokerite wax, were employed to create such matrixes. The thermal, microstructural, textural, wetting, antioxidant, antimicrobial and infrared characteristics of the matrixes were then studied. The diverse chemical composition (long-chain wax esters in carnauba wax and short-chain fatty acids and hydrocarbons in beeswax and ozokerite wax, respectively) explained the differences in wetting, texture, melting, and crystallization characteristics. Crystal forms of these matrix systems varied from grainy, oval, to needle-like shape, but keeping an orthorhombic allomorph. The alignment and reorganization of beeswax and ozokerite wax into needle-like crystals increased the matrix strength and adhesion force compared to those of carnauba and candelilla matrixes, which showed weak strength and grainy morphology. The former two waxes and their matrixes also showed the largest plasticity. These lipidic matrixes show potential use for topical applications having acceptable antioxidant and textural properties.

Enrollment Length, Service Category, and HIV Health Outcomes Among Low-Income HIV-Positive Persons Newly Enrolled in a Housing Program, New York City, 2014-2017.

Objectives. To evaluate the impact of duration and service category on HIV health outcomes among low-income adults living with HIV and enrolled in a housing program in 2014 to 2017.Methods. We estimated relative risk of engagement in care, viral suppression, and CD4 improvement for 561 consumers at first and second year after enrollment to matched controls through the New York City HIV surveillance registry, by enrollment length (enrolled for more than 1 year or not) and service category (housing placement assistance [HPA], supportive permanent housing [SPH], and rental assistance [REN]).Results. The SPH and REN consumers were enrolled longer and received more services, compared with HPA consumers. Long-term SPH and REN consumers had better engagement in care, viral suppression, and CD4 count than controls at both first and second year after enrollment, but the effect did not grow bigger from year 1 to 2. HPA consumers did not have better outcomes than controls regardless of enrollment length.Conclusions. Longer enrollment with timely housing placement and a higher number and more types of services are associated with better HIV health outcomes for low-income persons living with HIV with unmet housing needs.

Housing Subsidies and Housing Stability are Associated with Better HIV Medical Outcomes Among Persons Who Experienced Homelessness and Live with HIV and Mental Illness or Substance Use Disorder.

Among 958 applicants to a supportive housing program for low-income persons living with HIV (PLWH) and mental illness or a substance use disorder, we assessed impacts of housing placement on housing stability, HIV care engagement, and viral suppression. Surveillance and administrative datasets provided medical and residence information, including stable (e.g., rental assistance, supportive housing) and unstable (e.g., emergency shelter) government-subsidized housing. Sequence analysis identified a "quick stable housing" pattern for 67% of persons placed by this program within 2 years, vs. 28% of unplaced. Compared with unplaced persons not achieving stable housing quickly, persons quickly achieving stable housing were more likely to engage in care, whether placed (per Poisson regression, ARR: 1.14;95% CI 1.09-1.20) or unplaced (1.19;1.13-1.25) by this program, and to be virally suppressed, whether placed (1.22;1.03-1.44) or unplaced (1.26, 1.03-1.56) by this program. Housing programs can help homeless PLWH secure stable housing quickly, manage their infection, and prevent transmission.

RESUMEN: Unas 958 personas de bajos recursos y quienes viven con VIH y enfermedades mentales o bien presentan problemas de abuso de sustancias solicitaron a un programa de vivienda complementada con servicios de apoyo. Entre ellas, se evaluó los impactos de la colocación en viviendas sobre la estabilidad en la misma, así como la participación en los cuidados médicos para el VIH, y la supresión de la carga viral. Las bases de datos administrativas y del registro de vigilancia brindaron información médica y domiciliar, incluyendo información sobre vivienda estable (por ejemplo, asistencia de pago de renta a largo plazo, o vivienda complementada con servicios de apoyo) y vivienda inestable (por ejemplo, alojamiento de emergencia temporal) subsidiada por el gobierno. El método "análisis de secuencia" permitió identificar una pauta caracterizada por estabilidad domiciliar conseguida de modo ligero (es decir, de forma oportuna) en el 67% de las personas quienes fueron colocadas por este programa dentro de un lapso de dos años, comparado con 28% de las personas quienes no fueron colocadas. En comparación con las personas quienes no fueron colocadas y no lograron estabilidad de vivienda de modo ligero, las personas quienes lograron estabilidad de vivienda de modo ligero tuvieron una mayor probabilidad de participar en cuidados médicos, ya sea que fueran colocadas (según regresión de Poisson, cociente de riesgo ajustado: 1.14; intervalo de confianza de 95%: 1.09-1.20) o no fueran colocadas (1.19, 1.13-1.25) por este programa, así como de lograr la supresión de la carga viral, ya sea que fueran colocadas (1.22, 1.03-1.44) o no fueran colocadas (1.26, 1.03-1.56) por este programa. Los programas que facilitan la colocación en o el pago de vivienda y apoyo en el mismo pueden ayudar a las personas con VIH y sin hogar obtener vivienda estable de modo ligero, controlar su infección, y prevenir la transmisión.

Cost Comparison Between 2 Responses to Hepatitis A Virus Incidents in Restaurant Food Handlers-New York City, 2015 and 2017.

CONTEXT: While the New York City Department of Health and Mental Hygiene (DOHMH) can use agency-wide emergency activation to respond to a hepatitis A virus-infected food handler, there is a need to identify alternative responses that conserve scarce resources. OBJECTIVE: To compare the costs incurred by DOHMH of responding to a hepatitis A case in restaurant food handlers using an agency-wide emergency activation (2015) versus the cost of collaborating with a private network of urgent care clinics (2017). DESIGN: We partially evaluate the costs incurred by DOHMH of responding to a hepatitis A case in a restaurant food handler using agency-wide emergency activation (2015) with the cost of collaborating with a private network of urgent care clinics (2017) estimated for a scenario in which DOHMH incurred the retail cost of services rendered. RESULTS: Costs incurred by DOHMH for emergency activation were $65 831 ($238 per restaurant employee evaluated) of which DOHMH personnel services accounted for 85% ($55 854). Costs of collaboration would have totaled $50 914 ($253 per restaurant employee evaluated) of which personnel services accounted for 6% ($3146). CONCLUSIONS: Accounting for incident size, collaborating with the clinic network was more expensive than agency-wide emergency activation, though required fewer DOHMH personnel services.

A Randomized Controlled Trial of a Rapid Re-housing Intervention for Homeless Persons Living with HIV/AIDS: Impact on Housing and HIV Medical Outcomes.

We conducted a randomized controlled trial to determine whether, for homeless persons living with HIV/AIDS (PLWHA), rapid re-housing can improve housing and HIV viral suppression more than standard housing assistance. We recruited 236 PLWHA from HIV emergency housing in New York City (NYC) and randomized them to: (1) Enhanced Housing Placement Assistance (EHPA), i.e., immediate assignment to a case manager to rapidly re-house the client and provide 12 months of case management or (2) usual services, i.e., referral to an NYC housing placement program for which all HIV emergency housing residents were eligible. We compared time to stable housing placement and percentage virally suppressed from baseline to 12 months. EHPA clients were placed faster than usual services clients (p = 0.02; 25% placed by 150 days vs. 243 days, respectively), more likely to be placed [adjusted hazards ratio = 1.8; 95% confidence interval(CI) 1.1-2.8], and twice as likely to achieve or maintain suppression (adjusted odds ratio 2.1; 95% CI 1.1-4.0).

Multilevel Factors Associated with a Lack of Viral Suppression Among Persons Living with HIV in a Federally Funded Housing Program.

Persons with HIV who are receiving housing services often have high rates of engagement in care, yet many are not virally suppressed. We linked data from the New York City Housing Opportunities for Persons with AIDS (HOPWA) program to electronically reported laboratory tests from the HIV surveillance registry to examine factors associated with a lack of viral suppression. Of 1491 HOPWA consumers, 523 (35.1%) were not durably suppressed, and 253 (17.0%) were unsuppressed at their last viral load test. Substance use, age < 27 years, and emergency housing all independently predicted lack of durable viral suppression and lack of viral suppression at last viral load test.

Effect of HIV Housing Services on Engagement in Care and Treatment, New York City, 2011.

The federal Housing Opportunities for Persons with AIDS (HOPWA) program addresses housing needs of low-income persons living with HIV/AIDS (PLWHA). The New York City (NYC) Department of Health and Mental Hygiene oversees 22 HOPWA contracts for over 2,400 clients, and manages the NYC HIV Registry. HOPWA clients (N = 1,357) were matched to a random 20 % sample of other PLWHA (N = 13,489). Groups were compared on HIV care retention, viral suppression, and rebound. HOPWA clients were, on average, 3 years younger and more likely to be concurrently diagnosed with HIV and AIDS. While HOPWA clients were more likely to be retained in care (94 vs. 82 %; mOR = 2.97, 95 % CI 2.35-3.74), they were no more likely to achieve suppression (84 vs. 86 %; mOR = 0.85, 95 % 0.70-1.03) and were more likely to rebound (11 vs. 7 %; mOR = 1.45; 95 % CI 1.10-1.91). HIV care retention does not fully translate to virologic suppression in this low-income service population.

Effect of the compaction platform on the densification parameters of tableting excipients with different deformation mechanisms.

Several compaction models have been attempted to explain the compression and compaction phenomena of excipients. However, the resulting parameters could be influenced by the compaction platform such as dwell time, compact mass, geometry and type of material. The goal of this study is to assess the effect of these variables on the densification parameters obtained from key models such as Heckel, non-linear Heckel, Kawakita, Carstensen, and Leuenberger. The relationship among the parameters derived was determined by employing a Principal Component Analysis. Results indicated that factors such as compact geometry, consolidation time and compact mass had a negligible impact on parameters such as tensile strength, yield pressure and compressibility. On the contrary, the excipient type had the largest influence on these parameters. Further, the Leuenberger (γ) and Carstensen (f) parameters were highly correlated and related to the excipient deformation mechanism. Sorbitol and PVP-k30 were the most highly compactable excipients and were characterized for having a low yield pressure (P(y)), compressibility (a), and critical porosity (ε(c)). The magnitude of these parameters was highly dependent on the consolidation behavior of each material.

Effect of the Structural Modification of Plant Proteins as Microencapsulating Agents of Bioactive Compounds from Annatto Seeds (Bixa orellana L.).

This project studied the use of lentil protein (LP) and quinoa protein (QP) in their native and modified states as carrier material in the encapsulation process by the ionic gelation technique of annatto seed extract. Soy protein (SP) was used as a model of carrier material and encapsulated bioactive compounds, respectively. The plant proteins were modified by enzymatic hydrolysis, N acylation, and N-cationization to improve their encapsulating properties. Additionally, the secondary structure, differential scanning calorimetry (DSC), solubility as a function of pH, isoelectric point (pI), molecular weight (MW), the content of free thiol groups (SH), the absorption capacity of water (WHC) and fat (FAC), emulsifier activity (EAI), emulsifier stability (ESI), and gelation temperature (Tg) were assessed on proteins in native and modified states. The results obtained demonstrated that in a native state, LP (80.52% and 63.82%) showed higher encapsulation efficiency than QP (73.63% and 45.77%), both for the hydrophilic dye and for the annatto extract. Structural modifications on proteins improve some functional properties, such as solubility, WHC, FAC, EAI, and ESI. However, enzymatic hydrolysis on the proteins decreased the gels' formation, the annatto extract's encapsulated efficiency, and the hydrophilic dye by the ionic gelation method. On the other hand, the modifications of N-acylation and N-cationization increased but did not generate statistically significant differences (p-value > 0.05) in the encapsulation efficiency of both the annatto extract and the hydrophilic dye compared to those obtained with native proteins. This research contributes to understanding how plant proteins (LP and QP) can be modified to enhance their encapsulating and solubility properties. The better encapsulation of bioactive compounds (like annatto extract) can improve product self-life, potentially benefiting the development of functional ingredients for the food industry.

Homelessness and housing assistance among persons with HIV, and associations with HIV care and viral suppression, New York City 2018.

OBJECTIVES: To measure housing assistance and homelessness among persons living with HIV (PLWH) and their association with health. METHODS: Exposure categories were: experiencing homelessness (per emergency shelter use or self-report), receiving housing assistance (per housing subsidy) without homelessness, or neither homelessness nor receiving housing assistance. Outcomes were: engagement (≥1 visit) and retention (≥2 visits ≥90 days apart) in HIV-related medical care and one-time (latest viral load) and durable (≥1 viral load test, all suppressed) HIV viral suppression (<200 copies/mL). Among PLWH in New York City (NYC), we calculated and conducted modified Poisson regressions of the four outcomes according to exposure category. RESULTS: During 2018, 45% of NYC's 84,053 PLWH received housing assistance, and 8% experienced homelessness. Relative to homelessness, receipt of assistance without homelessness was associated with 3-7% higher adjusted relative risk (ARR) of engagement and retention in care and 31-64% higher ARR of one-time and durable viral suppression. Relative to not receiving assistance, receipt of assistance without homelessness was associated with 6-18% higher ARR of care and 2-5% lower ARR of viral suppression. CONCLUSIONS: Programs promoting housing stability may support HIV care and viral suppression, particularly if preventing homelessness. These may help improve HIV care and suppression rates.

Effect of silicification on the tableting performance of cellulose ii: a novel multifunctional excipient.

The effect of silicification on the tableting performance of microcrystalline cellulose II (MCCII) was assessed through coprocessing with fumed silica via spray drying and wet granulation at the 98:2, 95:5, 90:10 and 80:20 ratios. Compacts produced by spray drying and wet granulation rendered better tensile strength than MCCII. The Kawakita and Heckel models implied that silicification increased compressibility and decreased the plastic deforming behavior and densification by die filling at the early stage of compression for MCCII. It also decreased the sensitivity to hydrophobic lubricants such as magnesium stearate, especially for the spray-dried products due to the competing effect with magnesium stearate. Further, silicification decreased the high elastic recovery typical of MCCII due to the increase in specific surface area and fragmenting behavior which contributed to the formation of stronger compacts. Moreover, silicification did not affect the fast disintegrating properties and release rates of poorly soluble drugs such as griseofulvin formulated in tablets compared to those of Prosolv® SMCC 50 and Prosolv® SMCC 90. The new silicified materials are appropriate to formulate fast disintegrating tablets by direct compression.

Coprocessing of cellulose II with amorphous silicon dioxide: effect of silicification on the powder and tableting properties.

AIM: In recent years, coprocessing has been the most successful approach to improve and correct the functionality of excipients. The aim of this study is to coprocessed cellulose II with SiO(2) and to evaluate the resulting powder and tableting properties. METHODS: Novel cellulose II:SiO(2) (98:2, 95:5, 90:10 and 80:20 w/w ratios) composites were produced by spray drying, wet granulation and spheronization techniques and the resulting powder and tableting properties were assessed. RESULTS: Cellulose II:SiO(2) composites produced by spray- drying exhibited spherical/oblongate shape, narrow distribution and mean diameter from 51 to 75 µm. The composites produced by wet granulation had larger distribution, granular shape and a mean diameter from 105 to 129 µm. The spheronized composites showed the highest size (from 148 to 450 µm) and round shape. Bulk and tap densities and flow were reduced as the silicification level increased in the spray dried and wet granulated materials. Likewise, silicification increased the true density, porosity and surface roughness of these materials. Water sorption decreased only at silicification level of 20% being comparable to the ones shown by Prosolv(®) samples. Contact angles of all cellulose II materials were lower than those of cellulose I except for Celphere203 indicating better wettability. A 5% and 10% silicification levels rendered the strongest compacts for the spray dried and wet granulated materials, respectively. Silicification did not affect the fast disintegration properties of MCCII. CONCLUSIONS: Coprocessing proved to be useful tool to modify the powder and tableting properties of cellulose II.

Co-proccessed excipients with enhanced direct compression functionality for improved tableting performance.

It is necessary to have excipients with excellent functional properties to compensate for the poor mechanical properties and low aqueous solubility of the emerging active ingredients. Therefore, around 80% of the current drugs are not suitable for direct compression and more advanced excipients are required. Further, conventional grades of excipients cannot accommodate the technologically advanced high speed rotary tablet presses which require a powder with excellent flow, good compressibility, compactibility, particle size distribution and homogeneity of the ingredients. Co-processed excipients have been created to enhance the functional properties of the excipients and reduce their drawbacks. Co-processing is defined as the combination of two or more excipients by a physical process. Co-processed excipients are adequate for direct compression since they become multifunctional and thus, their dilution potential is high eliminating the need for many excipients in a formulation. In some cases, they are able to hold up to 50% of the drug in a formulation rendering compacts of good tableting properties. This study describes and discusses the functionality enhancement of commercial and investigational excipients through co-processing.

Functional assessment of four types of disintegrants and their effect on the spironolactone release properties.

Spironolactone is a drug derived from sterols that exhibits an incomplete oral absorption due to its low water solubility and slow dissolution rate. In this study, formulations of spironolactone with four disintegrants named as croscarmellose sodium, crospovidone, sodium starch glycolate and microcrystalline cellulose II (MCCII) were conducted. The effect of those disintegrants on the tensile strength, disintegration time and dissolution rate of spironolactone-based compacts was evaluated using a factorial design with three categorical factors (filler, lubricant, and disintegrant). The swelling values, water uptake and water sorption studies of these disintegrants all suggested that MCCII compacts disintegrate by a wicking mechanism similar to that of crospovidone, whereas a swelling mechanism was dominant for sodium starch glycolate and croscarmellose sodium. The disintegration time of MCCII and sodium starch glycolate remained unchanged with magnesium stearate. However, this lubricant delayed the disintegration time of crospovidone and croscarmellose sodium. MCCII presented the fastest disintegration time independent of the medium and lubricant employed. The water sorption ratio and swelling values determined sodium starch glycolate followed by croscarmellose sodium as the largest swelling materials, whereas crospovidone and MCCII where the least swelling disintegrants. The swelling property of sodium starch glycolate and croscarmellose sodium was strongly affected by the medium pH. The disintegration time of spironolactone compacts was faster when starch was used as a filler due to the formation of soft compacts. In this case, the type of filler employed rather than the disintegrant had a major effect on the disintegration and dissolution times of spironolactone.

Effect of the Concentration, pH, and Ca2+ Ions on the Rheological Properties of Concentrate Proteins from Quinoa, Lentil, and Black Bean.

Given consumer trends propelling a movement toward using plant protein in the food industry and searching for alternative protein ingredients by the industry, this study aimed to assess the influence of factors such as protein concentration, medium pH, and the presence of a divalent ion (Ca2+) upon the rheological properties such as viscosity change and gel formation of dispersion proteins extracted from quinoa, black beans, and lentils. A solution of each protein was prepared by varying its concentration (2.5%, 5.0%, and 10%), the pH (5.0, 7.0, and 9.0), and the incorporation of calcium chloride (0.0% and 1.0%). Each obtained solution was subjected to rheological tests to determine the parameters: consistency index (K), flow behavior (n), the storage (G') and loss (G'') modules, and the phase shift angle (δ). The results demonstrate that the incorporation of Ca2+, the shift in protein levels, and the decrease in pH modified the rheological behaviors of proteins, which were also influenced by the structural characteristics of each protein studied. However, thermal treatment and protein concentrations caused the most significant impact on proteins' rheological behavior, forming gels independently of other conditions. It was possible to study and interpret the studied proteins' rheological variations according to the environment's conditions.

Effect of Addition of Polyurea as an Aggregate in Mortars: Analysis of Microstructure and Strength.

The addition of polymers in construction is a new tendency and an important step toward the production of structures with better functional properties. This work investigates the addition of polyurea (PU) as a polymeric material in mortars. Polymer mortars were manufactured with the addition of polyurea retained in different sieves (T50 and T100) and different concentrations (2% and 5%). The characterization of the, polyurea (PU)control mortar (PU0%) and manufactured polyurea mortars (PU2%T50, PU5%T50, PU2%T100, and PU5%T100) was conducted by means of morphological analysis, SEM, XRF, TGA, and a compressive strength test of hydraulic mortars. The results show that mortars with polyurea retained in sieve 100 with a particle size of 150 µm exhibit better thermal behavior and a greater resistance to compression with a concentration of 5% polyurea with respect to the other samples. The present work reveals that polyurea retained in sieve 100 can be considered as a polymeric additive for mortars, indicating that it could be a candidate for applications such as construction.

Assessment of processing and polymorphic form effect on the powder and tableting properties of microcrystalline celluloses I and II.

Microcrystalline cellulose I (MCCI) is an excipient used as a diluent, disintegrant, glidant and binder for the production of pharmaceutical tablets. In this work, microcrystalline cellulose II (MCCII) was obtained from cotton fibers by basic treatment with 7.5 N NaOH followed by an acid hydrolysis. MCCI and MCCII materials were processed by wet granulation, dry granulation and spray drying. Either the polymorphic form or processing had no effects on the particle morphology or particle size. However, MCCII powders had a higher porosity, less packing tendency, degree of crystallinity, degree of polymerization and density, but a faster disintegration than MCCI. The tensile strength of MCCI was highly affected by the wet and dry granulation processes. Most of the resulting powder and tableting properties were dependent on the polymorphic form of cellulose, rather than on the processing employed.