Low Mg content on Ti-Nb-Sn alloy when in contact with eBMMSCs promotes improvement of its biological functions.

Magnesium is a metal used in the composition of titanium alloys and imparts porosity. Due to its osteoconductive, biocompatible and biodegradable characteristics, its application in the development of biomedical materials has become attractive. This study aimed to evaluate the influence of magnesium present in porous Ti-Nb-Sn alloys, which have a low elastic modulus in adhesive, osteogenic properties and the amount of reactive intracellular oxygen species released in mesenchymal stem cells derived from bone marrow equine bone (eBMMSCs). Mechanical properties of the alloy, such as hardness, compressive strength and elastic modulus, were analyzed, as well as surface morphological characteristics through scanning electron microscopy. The evaluation of magnesium ion release was performed by atomic force spectroscopy. The biological characteristics of the alloy, when in contact with the alloy surface and with the culture medium conditioned with the alloy, were studied by SEM and optical microscopy. Confirmation of osteogenic differentiation by alizarin red and detection of ROS using a Muse® Oxidative Stress Kit based on dihydroetide (DHE). The alloy showed an elastic modulus close to cortical bone values. The hardness was close to commercial Ti grade 2, and the compressive strength was greater than the value of cortical bone. The eBMMSCs adhered to the surface of the alloy during the experimental time. Osteogenic differentiation was observed with the treatment of eBMMMSCs with conditioned medium. The eBMMSCs treated with conditioned medium decreased ROS production, indicating a possible antioxidant defense potential of magnesium release.

Influence of inflammation on the expression of microRNA-140 in extracellular vesicles from 2D and 3D culture models of synovial-membrane-derived stem cells.

Background: In osteoarthritis (OA), articular homeostasis is regulated by microRNA-140 that inhibits ADAMTS-5, an enzyme that cleaves aggrecan and stimulates the synthesis of other inflammatory mediators. This study aims to evaluate the expression of microRNA-140 in extracellular vesicles (EVs) derived from equine synovial-membrane-derived mesenchymal stem cells (eqSMMSCs) cultured in monolayer (2D) and three-dimensional (3D) culture models under an in vitro inflammatory environment. Methods: Four experimental groups of eqSMMSC cultures were defined for isolation of the EVs. The 2D and 3D control groups were cultured in a conventional cell culture medium, while the 2D-OA and 3D-OA treatment groups were exposed to an OA-like medium containing IL-1ß and TNFα. The culture media samples were collected at 24 h, 72 h, and 120 h time points for EV isolation and characterization using nanoparticle tracking analysis (NTA) and transmission electron microscopy (TEM). Reverse transcription quantitative polymerase chain reaction was employed to assess the expressions of microRNA-140 in both the cells and EVs. All statistical analyses were conducted at the 5% significance level. Results: Encapsulation of the eqSMMSCs protected the cells from the inflammatory media compared to the monolayer cultures. EVs were found in higher concentrations in the 3D-OA cultures. Additionally, higher expressions of microRNA-140 were observed in the cells of the 3D-OA group at 24 and 72 h, whereas microRNA-140 expressions in the EVs were higher in the 3D group at 72 h and in the 2D-OA group at 120 h (p < 0.001). However, the 3D-OA culture showed higher expression of the mRNA Adamts5 in the EVs at 120 h. Conclusion: The responses of the eqSMMSCs to inflammatory stimuli involve intracellular expression of microRNA-140 and its subsequent transportation via the EVs, with quicker responses observed in the 3D than 2D cultures. This study sheds light on the behaviors of stem cells in restoring homeostasis in osteoarthritic joints.

Production of Cytotoxic Antibodies After Intra-Articular Injection of Allogeneic Synovial Membrane Mesenchymal Stem Cells With and Without LPS Administration.

Allogeneic mesenchymal stem cells (MSC) are widely used in clinical routine due to the shorter expansion time and reliability of its quality. However, some recipients can produce alloantibodies that recognize MSCs and activate the immune system, resulting in cell death. Although antibody production was already described after MSC injection, no previous studies described the immune response after intra-articular MSC injection in acute synovitis. This study aimed to evaluate the influence of inflammation on immune response after single and repeated intra-articular injections of synovial membrane MSC (SMMSC). Horses were divided in three groups: control group (AUTO) received autologous synovial membrane MSCs; whereas group two (ALLO) received allogeneic SMMSCs and group three (ALLO LPS) was submitted to acute experimental synovitis 8 h before SMMSCs injection. The procedure was repeated for all groups for 28 days. Physical and lameness evaluations and synovial fluid analysis were performed. Sera from all animals were obtained before and every 7 days after each injection up to 4 weeks, to perform microcytotoxicity assays incubating donor SMMSCs with recipients' sera. The first injection caused a mild and transient synovitis in all groups, becoming more evident and longer in ALLO and ALLO LPS groups after the second injection. Microcytotoxicity assays revealed significant antibody production as soon as 7 days after SMMSC injection in ALLO and ALLO LPS groups, and cytotoxicity scores of both groups showed no differences at any time point, being equally different from AUTO group. Although inflammation is capable of inducing MHC expression in MSCs, which enhances immune recognition, cytotoxicity scores were equally high in ALLO and ALLO LPS groups, making it difficult to determine the potentiation effect of inflammation on antibody production. Our findings suggest that inflammation does not display a pivotal role in immune recognition on first allogeneic MSC injection. In a translational way, since specific antibodies were produced against MSCs, patients that need more than one MSC injection may benefit from a first allogeneic injection followed by subsequent autologous injections.

Physical and biological characterizations of TiNbSn/(Mg) system produced by powder metallurgy for use as prostheses material.

Titanium scaffolds with non-toxic ß stabilizing elements (Nb and Sn), Ti-34Nb-6Sn (TNS), and with magnesium as spacer (TNS/M), were processed by powder metallurgy, and sintered at 800 °C. The X-ray diffraction (XRD) pattern showed that materials are biphasic alloys, presenting 45 to 42% (wt %) in hcp (α-phase) and the rest is bcc (ß-phase), and the presence of a slight peak relating to TiO2 in both materials. Pores of approximately 50 µm for TNS and 300 µm to TNS/M were observed in the micrographic analysis by scanning electron microscopy (SEM). The wettability was higher for TNS/M compared to TNS. The elastic modulus was higher for TNS compared to TNS/M. Stem cells derived from equine bone marrow (BMMSCs) were used for in vitro assays. The morphologic and adhesion evaluation after 72 h, carried out by direct contact assay with the materials showed that the BMMSCs were anchored and adhered to the porous scaffolds, in the way the cytoplasmic extension was observed. The cellular migration, using the "wound healing" method, was significant for the groups treated with conditioned medium with materials in 24 h. Osteogenic differentiation of BMMSCs, assessed by calcium deposition and staining with Alizarin Red, was greater in the conditioned medium with TNS/M in 10 days of culture. Since the biological effects was good and the elastic modulus decreased in the system with magnesium is a promising new content titanium alloy for biomedical application.

In Vitro Biological Performance of Alginate Hydrogel Capsules for Stem Cell Delivery.

Encapsulation of biological components in hydrogels is a well described method for controlled drug delivery of proteins, tissue engineering and intestinal colonization with beneficial bacteria. Given the potential of tissue engineering in clinical practice, this study aimed to evaluate the feasibility of encapsulation of adipose tissue-derived mesenchymal stem cells (MSCs) of mules in sodium alginate. We evaluated capsule morphology and cell viability, immunophenotype and release after encapsulation. Circular and irregular pores were observed on the hydrogel surface, in which MSCs were present and alive. Capsules demonstrated good capacity of absorption of liquid and cell viability was consistently high through the time points, indicating proper nutrient diffusion. Flow cytometry showed stability of stem cell surface markers, whereas immunohistochemistry revealed the expression of CD44 and absence of MHC-II through 7 days of culture. Stem cell encapsulation in sodium alginate hydrogel is a feasible technique that does not compromise cell viability and preserves their undifferentiated status, becoming a relevant option to further studies of tridimensional culture systems and in vivo bioactive agents delivery.

Bone Morphogenetic Proteins: Promising Molecules for Bone Healing, Bioengineering, and Regenerative Medicine.

Bone morphogenetic proteins (BMPs), glycoproteins secreted by some cells, are members of the TGF-ß superfamily that have been implicated in a wide variety of roles. Currently, about 20 different BMPs have been identified and grouped into subfamilies, according to similarities with respect to their amino acid sequences. It has been shown that BMPs are secreted growth factors involved in mesenchymal stem cell differentiation, also being reported to control the differentiation of cancer stem cells. BMPs initiate signaling from the cell surface by binding to two different receptors (R: Type I and II). The heterodimeric formation of type I R and II R may occur before or after BMP binding, inducing signal transduction pathways through SMADs. BMPs may also signal through SMAD-independent pathways via mitogen-activated protein kinases (ERK, p38MAPKs, JNK). BMPs may act in an autocrine or paracrine manner, being regulated by specific antagonists, namely: noggin and chordin. Genetic engineering allows the production of large amounts of BMPs for clinical use, and clinical trials have shown the benefits of FDA-approved recombinant human BMPs 2 and 7. Several materials from synthetic to natural sources have been tested as BMP carriers, ranging from hydroxyapatite, and organic polymers to collagen. Bioactive membranes doped with BMPs are promising options, acting to accelerate and enhance osteointegration. The development of smart materials, mainly based on biopolymers and bone-like calcium phosphates, appears to provide an attractive alternative for delivering BMPs in an adequately controlled fashion. BMPs have revealed a promising future for the fields of Bioengineering and Regenerative Medicine. In this chapter, we review and discuss the data on BMP structure, mechanisms of action, and possible clinical applications.