Divergent minute virus of canines strains identified in illegally imported puppies in Italy.

Minute virus of canines (MVC) belongs to the family Parvoviridae, genus Bocaparvovirus, and has been mainly described during enteritis episodes in young dogs. This study reports the characterization of four divergent MVC strains detected between 2012 and 2018, three of which were from dogs illegally imported into Italy, most probably from Eastern Europe, that cluster together phylogenetically but share low genetic similarity with the fourth MVC from an autochthonous dog and other available MVC sequences. Our data indicate that the introduction of genetically distinct MVC strains occurred through the illegal movement of dogs from a geographic area where a distinct MVC lineage was most likely circulating. Enforced surveillance of MVC in the dog population of Eastern Europe and its neighboring countries may shed light on, and eventually trace back to, illegal animal movements.

Association of the pr peptides with dengue virus at acidic pH blocks membrane fusion.

Flavivirus assembles into an inert particle that requires proteolytic activation by furin to enable transmission to other hosts. We previously showed that immature virus undergoes a conformational change at low pH that renders it accessible to furin (I. M. Yu, W. Zhang, H. A. Holdaway, L. Li, V. A. Kostyuchenko, P. R. Chipman, R. J. Kuhn, M. G. Rossmann, and J. Chen, Science 319:1834-1837, 2008). Here we show, using cryoelectron microscopy, that the structure of immature dengue virus at pH 6.0 is essentially the same before and after the cleavage of prM. The structure shows that after cleavage, the proteolytic product pr remains associated with the virion at acidic pH, and that furin cleavage by itself does not induce any major conformational changes. We also show by liposome cofloatation experiments that pr retention prevents membrane insertion, suggesting that pr is present on the virion in the trans-Golgi network to protect the progeny virus from fusion within the host cell.

The structure of a T = 1 icosahedral empty particle from southern bean mosaic virus.

The structure of a T = 1 icosahedral particle (where T is the triangulation number), assembled from southern bean mosaic virus coat protein fragments that lacked the amino-terminal arm, was solved by means of model building procedures with the use of 6-angstrom resolution x-ray diffraction data. The icosahedral five-, three-, and twofold contacts were found to be similar, at this resolution, to the analogous contacts (icosahedral five-, quasi-three-, and quasi-twofolds) found in the parent T = 3 southern bean mosaic virus. However, the icosahedral fivefold contacts of the T = 3 structure are the most conserved in the T = 1 capsid. These results are consistent with a mechanism in which pentameric caps of dimers are the building blocks for the assembly of T = 1 and T = 3 icosahedral viruses.

X-ray crystallographic structure of the Norwalk virus capsid.

Norwalk virus, a noncultivatable human calicivirus, is the major cause of epidemic gastroenteritis in humans. The first x-ray structure of a calicivirus capsid, which consists of 180 copies of a single protein, has been determined by phase extension from a low-resolution electron microscopy structure. The capsid protein has a protruding (P) domain connected by a flexible hinge to a shell (S) domain that has a classical eight-stranded beta-sandwich motif. The structure of the P domain is unlike that of any other viral protein with a subdomain exhibiting a fold similar to that of the second domain in the eukaryotic translation elongation factor-Tu. This subdomain, located at the exterior of the capsid, has the largest sequence variation among Norwalk-like human caliciviruses and is likely to contain the determinants of strain specificity and cell binding.

The site of attachment in human rhinovirus 14 for antiviral agents that inhibit uncoating.

WIN 51711 and WIN 52084 are structurally related, antiviral compounds that inhibit the replication of rhino (common cold) viruses and related picornaviruses. They prevent the pH-mediated uncoating of the viral RNA. The compounds consist of a 3-methylisoxazole group that inserts itself into the hydrophobic interior of the VP1 beta-barrel, a connecting seven-membered aliphatic chain, and a 4-oxazolinylphenoxy group (OP) that covers the entrance to an ion channel in the floor of the "canyon." Viral disassembly may be inhibited by preventing the collapse of the VP1 hydrophobic pocket or by blocking the flow of ions into the virus interior.

The atomic structure of Mengo virus at 3.0 A resolution.

The structure of Mengo virus, a representative member of the cardio picornaviruses, is substantially different from the structures of rhino- and polioviruses. The structure of Mengo virus was solved with the use of human rhinovirus 14 as an 8 A resolution structural approximation. Phase information was then extended to 3 A resolution by use of the icosahedral symmetry. This procedure gives promise that many other virus structures also can be determined without the use of the isomorphous replacement technique. Although the organization of the major capsid proteins VP1, VP2, and VP3 of Mengo virus is essentially the same as in rhino- and polioviruses, large insertions and deletions, mostly in VP1, radically alter the surface features. In particular, the putative receptor binding "canyon" of human rhinovirus 14 becomes a deep "pit" in Mengo virus because of polypeptide insertions in VP1 that fill part of the canyon. The minor capsid peptide, VP4, is completely internal in Mengo virus, but its association with the other capsid proteins is substantially different from that in rhino- or poliovirus. However, its carboxyl terminus is located at a position similar to that in human rhinovirus 14 and poliovirus, suggesting the same autocatalytic cleavage of VP0 to VP4 and VP2 takes place during assembly in all these picornaviruses.

The three-dimensional structure of canine parvovirus and its functional implications.

The three-dimensional atomic structure of a single-stranded DNA virus has been determined. Infectious virions of canine parvovirus contain 60 protein subunits that are predominantly VP-2. The central structural motif of VP-2 has the same topology (an eight-stranded antiparallel beta barrel) as has been found in many other icosahedral viruses but represents only about one-third of the capsid protein. There is a 22 angstrom (A) long protrusion on the threefold axes, a 15 A deep canyon circulating about each of the five cylindrical structures at the fivefold axes, and a 15 A deep depression at the twofold axes. By analogy with rhinoviruses, the canyon may be the site of receptor attachment. Residues related to the antigenic properties of the virus are found on the threefold protrusions. Some of the amino termini of VP-2 run to the exterior in full but not empty virions, which is consistent with the observation that some VP-2 polypeptides in full particles can be cleaved by trypsin. Eleven nucleotides are seen in each of 60 symmetry-related pockets on the interior surface of the capsid and together account for 13 percent of the genome.

Ab initio phase determination and phase extension using non-crystallographic symmetry.

Non-crystallographic symmetry (NCS) can be used to improve, extend or find ab initio phases to be associated with a set of observed structure amplitudes, resulting in an interpretable electron-density map. The simplest application is merely to improve the accuracy of the phases by cyclically averaging the electron density, Fourier back-transformation of the modified map, and recomputing a new map with the newly found phases. The first sophistication of this procedure is to phase extend, in successive small steps, the currently available phase information to higher resolution, where only observed amplitudes were previously available. A further sophistication is to initiate the phase extension from very low resolution where a simple geometric model, or an electron microscope image, would be consistent with the chosen resolution. A number of recent examples of virus structure determination exist where such ab initio phasing was successful. The ultimate ab initio phase determination would be to extend phases given only an estimate of the F(000) term.

Single-stranded DNA-protein interactions in canine parvovirus.

BACKGROUND: Parvoviruses are small icosahedral single-stranded (ss) DNA viruses which replicate in rapidly proliferating cells, causing a variety of serious and often lethal diseases in mammals, including humans. The structure of canine parvovirus (CPV) showed an 11-nucleotide oligomeric fragment of its genome bound to 60 equivalent binding sites on the inside surface of the capsid. This provides an opportunity to study the conformation of ssDNA, its interactions with protein, and its role in viral assembly. RESULTS: The icosahedrally ordered part of CPV ssDNA has an unusual loop conformation with the bases pointing outwards and the phosphates surrounding metal ions on the inside. The protein interacts with the bases, making 15 putative hydrogen bonds. The DNA electron density indicates preferences for particular base types in parts of the binding site. Statistical analysis of the genome yields approximately 30 regions with sequences similar to that observed in the structure, demonstrating a low level of sequence specificity for binding to capsid protein. CONCLUSIONS: ssDNA can adopt unusual conformations upon association with protein by using phosphoribose backbone rotamers that are found in tRNA, but not in DNA duplexes. The CPV DNA-protein interactions differ from the non-specific backbone interactions seen in some plant and insect viruses. The sequence specificity, albeit low level, of the protein for CPV DNA may contribute both to distinguishing the viral DNA from other nucleic acids and to the DNA packaging process during viral assembly.

Courageous science: structural studies of bluetongue virus core.

The structure of the bluetongue virus core was recently reported and represents the largest structure determined to atomic resolution. As a biological machine capable of RNA transcription, the structure has immense biological significance.

Structure of bacteriophage T4 fibritin: a segmented coiled coil and the role of the C-terminal domain.

BACKGROUND: Oligomeric coiled-coil motifs are found in numerous protein structures; among them is fibritin, a structural protein of bacteriophage T4, which belongs to a class of chaperones that catalyze a specific phage-assembly process. Fibritin promotes the assembly of the long tail fibers and their subsequent attachment to the tail baseplate; it is also a sensing device that controls the retraction of the long tail fibers in adverse environments and, thus, prevents infection. The structure of fibritin had been predicted from sequence and biochemical analyses to be mainly a triple-helical coiled coil. The determination of its structure at atomic resolution was expected to give insights into the assembly process and biological function of fibritin, and the properties of modified coiled-coil structures in general. RESULTS: The three-dimensional structure of fibritin E, a deletion mutant of wild-type fibritin, was determined to 2.2 A resolution by X-ray crystallography. Three identical subunits of 119 amino acid residues form a trimeric parallel coiled-coil domain and a small globular C-terminal domain about a crystallographic threefold axis. The coiled-coil domain is divided into three segments that are separated by insertion loops. The C-terminal domain, which consists of 30 residues from each subunit, contains a beta-propeller-like structure with a hydrophobic interior. CONCLUSIONS: The residues within the C-terminal domain make extensive hydrophobic and some polar intersubunit interactions. This is consistent with the C-terminal domain being important for the correct assembly of fibritin, as shown earlier by mutational studies. Tight interactions between the C-terminal residues of adjacent subunits counteract the latent instability that is suggested by the structural properties of the coiled-coil segments. Trimerization is likely to begin with the formation of the C-terminal domain which subsequently initiates the assembly of the coiled coil. The interplay between the stabilizing effect of the C-terminal domain and the labile coiled-coil domain may be essential for the fibritin function and for the correct functioning of many other alpha-fibrous proteins.

Functional implications of the structure of the murine parvovirus, minute virus of mice.

BACKGROUND: Minute virus of mice (MVM) is a single-stranded (ss) DNA-containing, murine parvovirus with a capsid built up of 60 icosahedrally related polypeptide chains, each of which consists of the C-terminal region common to two structural proteins, VP1 and VP2. In infectious virions, most VP2 molecules are cleaved to VP3 by the removal of about 20 amino acids from the N terminus. Of the 587 amino acids in VP2, approximately half are identical to those in the analogous capsid protein of the antigenically distinct canine parvovirus (CPV), the crystal structure of which has previously been determined. The three-dimensional structure determination of MVMi (the immunosuppressive strain of MVM) was previously reported to 3.5 A resolution. RESULTS: We report here an analysis of the MVMi virus structure and provide insights into tissue tropism, antigenicity and DNA packaging. Amino acids determining MVM tissue tropism were found to cluster on, or near, the viral surface. A conserved, glycine-rich, N-terminal peptide was seen to run through a cylindrical channel along each fivefold axis and may have implications for antigenicity. Density within the virion was interpreted as 29 ssDNA nucleotides per icosahedral asymmetric unit, and accounts for over one-third of the viral genome. CONCLUSIONS: The presence of the glycine-rich sequence in the fivefold channels of MVMi provides a possible mechanism to explain how the unique N-terminal region of VP1 becomes externalized in infectious parvovirions. Residues that determine tropism may form an attachment recognition site for a secondary host-cell factor that modulates tissue specificity. The ordering of nucleotides in a similar region of the interior surface in the CPV and MVMi capsids suggests the existence of a genomic DNA-recognition site within the parvoviral capsid.

The structure of an insect parvovirus (Galleria mellonella densovirus) at 3.7 A resolution.

BACKGROUND: Parvoviruses infect vertebrates, insects and crustaceans. Many arthropod parvoviruses (densoviruses) are highly pathogenic and kill approximately 90% of the host larvae within days, making them potentially effective as selective pesticides. Improved understanding of densoviral structure and function is therefore desirable. There are four different initiation sites for translation of the densovirus capsid protein mRNA, giving rise to the viral proteins VP1 to VP4. Sixty copies of the common, C-terminal domain make up the ordered part of the icosahedral capsid. RESULTS: The Galleria mellonella densovirus (GMDNV) capsid protein consists of a core beta-barrel motif, similar to that found in many other viral capsid proteins. The structure most closely resembles that of the vertebrate parvoviruses, but it has diverged beyond recognition in many of the long loop regions that constitute the surface features and intersubunit contacts. The N termini of twofold-related subunits have swapped their positions relative to those of the vertebrate parvoviruses. Unlike in the vertebrate parvoviruses, in GmDNV there is no continuous electron density in the channels running along the fivefold axes of the virus. Electron density corresponding to some of the single-stranded DNA genome is visible in the crystal structure, but it is not as well defined as in the vertebrate parvoviruses. CONCLUSIONS: The sequence of the glycine-rich motif, which occupies each of the channels along the fivefold axes in vertebrate viruses, is conserved between mammalian and insect parvoviruses. This motif may serve to externalize the N-terminal region of the single VP1 subunit per particle. The domain swapping of the N termini between insect and vertebrate parvoviruses may have the effect of increasing capsid stability in GmDNV.

The structure of a neutralized virus: canine parvovirus complexed with neutralizing antibody fragment.

BACKGROUND: Members of the Parvovirus genus cause a variety of diseases in mammals, including humans. One of the major defences against viral infection is the presence of neutralizing antibodies that prevent virus particles from infecting target cells. The mechanism of neutralization is not well understood. We therefore studied the structure of canine parvovirus (CPV) complexed with the Fab fragment of a neutralizing antibody, A3B10, using image reconstruction of electron micrographs of vitrified samples, together with the already known structure of CPV from X-ray crystallographic data. RESULTS: The structure of the complex of CPV with Fab A3B10 has been determined to 23 A resolution. The known CPV atomic structure was subtracted from the electron density of the complex, and the difference map was used to fit the atomic coordinates of a known Fab fragment, HyHEL-5. The long axis of each Fab molecule is oriented in a near radial direction, inclined away from the two-fold axes. The viral epitope consists of 14 amino acid residues found in loops 1, 2 and 3 on the capsid surface, which include previously identified escape mutations. CONCLUSIONS: The mode of Fab binding suggests that the A3B10 neutralizing antibody cannot bind bivalently to the capsid across the two-fold axes, consistent with the observation that whole A3B10 antibody readily precipitates CPV. Since Fab A3B10 can also neutralize the virus, mechanisms of neutralization such as interference with cell attachment, cell entry, or uncoating, must be operative.

Identification of a protein binding site on the surface of the alphavirus nucleocapsid and its implication in virus assembly.

BACKGROUND: Many enveloped viruses exit cells by budding from the plasma membrane. The driving force for budding is the interaction of an inner protein nucleocapsid core with transmembrane glycoprotein spikes. The molecular details of this process are ill defined. Alphaviruses, such as Sindbis virus (SINV) and Semliki Forest virus (SFV), represent some of the simplest enveloped viruses and have been well characterized by structural, genetic and biochemical techniques. Although a high-resolution structure of an alphavirus has not yet been attained, cryo-electron microscopy (cryo-EM) has been used to show the multilayer organization at 25 A resolution. In addition, atomic resolution studies are available of the C-terminal domain of the nucleocapsid protein and this has been modeled into the cryo-EM density. RESULTS: A recombinant form of Sindbis virus core protein (SCP) was crystallized and found to diffract much better than protein extracted from the virus (2.0 A versus 3.0 A resolution). The new structure showed that amino acids 108 to 111 bind to a specific hydrophobic pocket in neighboring molecules. Re-examination of the structures derived from virus-extracted protein also showed this 'N-terminal arm' binding to the same hydrophobic pocked in adjacent molecules. It is proposed that the binding of these capsid residues into the hydrophobic pocket of SCP mimics the binding of E2 (one of two glycoproteins that penetrate the lipid bilayer of the viral envelope) C-terminal residues in the pocket. Mutational studies of capsid residues 108 and 110 confirm their role in capsid assembly. CONCLUSIONS: Structural and mutational analyses of residues within the hydrophobic pocket suggest that budding results in a switch between two conformations of the capsid hydrophobic pocket. This is the first description of a viral budding mechanism in molecular detail.

The refined structure of human rhinovirus 16 at 2.15 A resolution: implications for the viral life cycle.

BACKGROUND: Rhinoviruses belong to the picornavirus family and are small, icosahedral, non-enveloped viruses containing one positive RNA strand. Human rhinovirus 16 (HRV16) belongs to the major receptor group of rhinoviruses, for which the cellular receptor is intercellular adhesion molecule-1 (ICAM-1). In many rhinoviruses, one of the viral coat proteins (VP1) contains a hydrophobic pocket which is occupied by a fatty acid-like molecule, or so-called 'pocket factor'. Antiviral agents have been shown to bind to the hydrophobic pocket in VP1, replacing the pocket factor. The presence of the antiviral compound blocks uncoating of the virus and in some cases inhibits receptor attachment. A refined, high-resolution structure would be expected to provide further information on the nature of the pocket factor and other features previously not clearly identified. RESULTS: The structure of native HRV16 has been refined to a resolution of 2.15 A. The hydrophobic pocket in VP1 is observed in two alternative conformations. In one of these, the pocket is filled by a pocket factor and the protein structure is similar to virus-antiviral compound complexes. In the other conformation, the hydrophobic pocket is collapsed and empty. RNA bases stack against both a tryptophan and a phenylalanine residue on the internal surface of the viral capsid. Site-directed mutagenesis of the tryptophan, which is conserved across the picornaviruses, to nonconservative residues results in non-viable virus. Five symmetry-related N termini of coat protein VP4 form a ten-stranded, antiparallel beta barrel around the base of the icosahedral fivefold axis. The N termini of VP1 are amphipathic alpha helices, which stack on the outside of this beta barrel. The N termini of VP1 and VP4 have not been observed previously in rhinovirus structures. CONCLUSIONS: The observation of a partially occupied hydrophobic pocket in HRV16 forms a missing link between HRV14, which is always observed with no pocket factor in the native form, and rhinovirus 1A and other picornaviruses (e.g. poliovirus, coxsackievirus) which contain pocket factors. The pocket factor molecules probably regulate viral entry, uncoating and assembly. Picornavirus assembly is known to proceed via pentamers, therefore, the interaction of RNA with the conserved tryptophan residues across twofold axes between pentamers may play a role in picornavirus assembly. The positioning of a cation on the icosahedral fivefold axes and the structure of the N termini of VP4 and VP1 around these axes suggest a mechanism for the uncoating of rhinoviruses.

Structure and self-association of the Rous sarcoma virus capsid protein.

BACKGROUND: The capsid protein (CA) of retroviruses, such as Rous sarcoma virus (RSV), consists of two independently folded domains. CA functions as part of a polyprotein during particle assembly and budding and, in addition, forms a shell encapsidating the genomic RNA in the mature, infectious virus. RESULTS: The structures of the N- and C-terminal domains of RSV CA have been determined by X-ray crystallography and solution nuclear magnetic resonance (NMR) spectroscopy, respectively. The N-terminal domain comprises seven alpha helices and a short beta hairpin at the N terminus. The N-terminal domain associates through a small, tightly packed, twofold symmetric interface within the crystal, different from those previously described for other retroviral CAs. The C-terminal domain is a compact bundle of four alpha helices, although the last few residues are disordered. In dilute solution, RSV CA is predominantly monomeric. We show, however, using electron microscopy, that intact RSV CA can assemble in vitro to form both tubular structures constructed from toroidal oligomers and planar monolayers. Both modes of assembly occur under similar solution conditions, and both sheets and tubes exhibit long-range order. CONCLUSIONS: The tertiary structure of CA is conserved across the major retroviral genera, yet sequence variations are sufficient to cause change in associative behavior. CA forms the exterior shell of the viral core in all mature retroviruses. However, the core morphology differs between viruses. Consistent with this observation, we find that the capsid proteins of RSV and human immunodeficiency virus type 1 exhibit different associative behavior in dilute solution and assemble in vitro into different structures.

The structure of coxsackievirus B3 at 3.5 A resolution.

BACKGROUND: Group B coxsackieviruses (CVBs) are etiologic agents of a number of human diseases that range in severity from asymptomatic to lethal infections. They are small, single-stranded RNA icosahedral viruses that belong to the enterovirus genus of the picornavirus family. Structural studies were initiated in light of the information available on the cellular receptors for this virus and to assist in the design of antiviral capsid-binding compounds for the CVBs. RESULTS: The structure of coxsackievirus B3 (CVB3) has been solved to a resolution of 3.5 A. The beta-sandwich structure of the viral capsid proteins VP1, VP2 and VP3 is conserved between CVB3 and other picornaviruses. Structural differences between CVB3 and other enteroviruses and rhinoviruses are located primarily on the viral surface. The hydrophobic pocket of the VP1 beta-sandwich is occupied by a pocket factor, modeled as a C16 fatty acid. An additional study has shown that the pocket factor can be displaced by an antiviral compound. Myristate was observed covalently linked to the N terminus of VP4. Density consistent with the presence of ions was observed on the icosahedral threefold and fivefold axes. CONCLUSIONS: The canyon and twofold depression, major surface depressions, are predicted to be the primary and secondary receptor-binding sites on CVB3, respectively. Neutralizing immunogenic sites are predicted to lie on the extreme surfaces of the capsid at sites that lack amino acid sequence conservation among the CVBs. The ions located on the icosahedral threefold and fivefold axes together with the pocket factor may contribute to the pH stability of the coxsackieviruses.

Human rhinovirus 3 at 3.0 A resolution.

BACKGROUND: The over 100 serotypes of human rhinoviruses (HRV) are major causative agents of the common cold in humans. These HRVs can be roughly divided into a major and minor group according to their cellular receptors. They can also be divided into two antiviral groups, A and B, based on their sensitivity to different capsid-binding antiviral compounds. The crystal structures of HRV14 and HRV16, major-receptor group rhinoviruses, as well as HRV1A, a minor-receptor group rhinovirus, were determined previously. Sequence comparisons had shown that HRV14 seemed to be an outlier among rhinoviruses. Furthermore, HRV14 was the only virus with no cellular 'pocket factor' in a hydrophobic pocket which is targeted by many capsid-binding antiviral compounds and is thought to regulate viral stability. HRV3, another major-receptor group virus, was chosen for study because it is one of a subset of serotypes that best represents the drug sensitivity of most rhinovirus serotypes. Both HRV3 and HRV14 belong to antiviral group A, while HRV16 and HRV1A belong to antiviral group B. RESULTS: HRV3 was found to be very similar to HRV14 in sequence and structure. Like HRV14, crystallized HRV3 also has no bound pocket factor. The structure of HRV3 complexed with an antiviral compound, WIN56291, was also determined and found to be similar to the same antiviral compound complexed with HRV14. CONCLUSIONS: The amino-acid sequence and structural similarity between HRV3 and HRV14 suggests that rhinoviruses in the same antiviral group have similar amino-acid sequences and structures. The similar amino-acid composition in the pocket region and the viral protein VP1 N termini in all known group B HRV sequences suggests that these viruses may all contain pocket factors and ordered N-terminal amphipathic helices in VP1. Both of these factors contribute to viral stability, which is consistent with the observations that group B rhinoviruses have a higher chance of successful transmission from one host to another and is a possible explanation for the observed higher pathogenicity of these rhinoviruses.

The structure of bacteriophage T4 gene product 9: the trigger for tail contraction.

BACKGROUND: The T4 bacteriophage consists of a head, filled with double-stranded DNA, and a complex contractile tail required for the ejection of the viral genome into the Escherichia coli host. The tail has a baseplate to whïch are attached six long and six short tail fibers. These fibers are the sensing devices for recognizing the host. When activated by attachment to cell receptors, the fibers cause a conformational transition in the baseplate and subsequently in the tail sheath, which initiates DNA ejection. The baseplate is a multisubunit complex of proteins encoded by 15 genes. Gene product 9 (gp9) is the protein that connects the long tail fibers to the baseplate and triggers the tail contraction after virus attachment to a host cell. RESULTS: The crystal structure of recombinant gp9, determined to 2.3 A resolution, shows that the protein of 288 amino acid residues assembles as a homotrimer. The monomer consists of three domains: the N-terminal domain generates a triple coiled coil; the middle domain is a mixed, seven-stranded beta sandwich with a topology not previously observed; and the C-terminal domain is an eight-stranded, antiparallel beta sandwich having some resemblance to 'jelly-roll' viral capsid protein structures. CONCLUSIONS: The biologically active form of gp9 is a trimer. The protein contains flexible interdomain hinges, which are presumably required to facilitate signal transmission between the long tail fibers and the baseplate. Structural and genetic analyses show that the C-terminal domain is bound to the baseplate, and the N-terminal coiled-coil domain is associated with the long tail fibers.