An Integrated Experimental-Computational Study of Vocal Fold Vibration in Type I Thyroplasty.

Subject-specific computational modeling of vocal fold (VF) vibration was integrated with an ex vivo animal experiment of type 1 thyroplasty to study the effect of the implant on the vocal fold vibration. In the experiment, a rabbit larynx was used to simulate type 1 thyroplasty, where one side of the vocal fold was medialized with a trans-muscular suture while the other side was medialized with a silastic implant. Vocal fold vibration was then achieved by flowing air through the larynx and was filmed with a high-speed camera. The three-dimensional computational model was built upon the pre-operative scan of the laryngeal anatomy. This subject-specific model was used to simulate the vocal fold medialization and then the fluid-structure interaction (FSI) of the vocal fold. Model validation was done by comparing the vocal fold displacement with postoperative scan (for medialization), and by comparing the vibratory characteristics with the high-speed images (for vibration). These comparisons showed the computational model successfully captured the effect of the implant and thus has the potential for presurgical planning.

Custom Laser-Cut Silastic® Implants for Type I Thyroplasty in a Preclinical Model.

This study aimed to produce customized silicone elastomer implants of varied size and shape for optimization of type I thyroplasty procedures in a rabbit model. Computer-aided design models of different implant designs were designed and used to program laser cutting of a medical-grade Silastic® sheet. Laser-cut implants were produced rapidly and cost-efficiently. Surgical implantation demonstrated vocal fold medialization and phonation in 5 test subjects. This technique may provide a low-cost alternative or adjunct method to hand-carving or commercial implants.

Protein Substrate Alters Cell Physiology in Primary Culture of Vocal Fold Epithelial Cells.

The basement membrane interacts directly with the vocal fold epithelium. Signaling between the basement membrane and the epithelium modulates gene regulation, differentiation, and proliferation. The purpose of this study was to identify an appropriate simple single-protein substrate for growth of rabbit vocal fold epithelial cells. Vocal folds from 3 New Zealand white rabbits (Oryctolagus cuniculus) were treated to isolate epithelial cells, and cells were seeded onto cell culture inserts coated with collagen I, collagen IV, laminin, or fibronectin. Transepithelial electrical resistance (TEER) was measured, and phase contrast microscopy, PanCK, CK14, and E-cadherin immunofluorescence were utilized to assess for epithelial cell-type characteristics. Further investigation via immunofluorescence labeling was conducted to assess proliferation (Ki67) and differentiation (Vimentin). There was a significant main effect of substrate on TEER, with collagen IV eliciting the highest, and laminin the lowest resistance. Assessment of relative TEER across cell lines identified a larger range of TEER in collagen I and laminin. Phase contrast imaging identified altered morphology in the laminin condition, but cell layer depth did not appear to be related to TEER, differentiation, or morphology. Ki67 staining additionally showed no significant difference in proliferation. All conditions had confluent epithelial cells and dispersed mesenchymal cells, with increased mesenchymal cell numbers over time; however, a higher proportion of mesenchymal cells was observed in the laminin condition. The results suggest collagen IV is a preferable basement membrane substrate for in vitro vocal fold epithelial primary cell culture, providing consistent TEER and characteristic cell morphology, and that laminin is an unsuitable substrate for vocal fold epithelial cells and may promote mesenchymal cell proliferation.

Assessment of an anisotropic coarse-grained model for cis-1,4-polybutadiene: a bottom-up approach.

The spherical representation usually utilized for the coarse-grained particles of soft matter systems is an assumption and pertinent studies have shown that both structural and dynamical properties can depend on anisotropic effects. On these grounds, we develop coarse-grained equations of motion which take into account explicitly the anisotropy of the beads. As a first step, this model incorporates only conservative terms. Inclusion of the dissipative and random terms is in principle possible but is beyond the scope of this study. The translational dynamics of the beads is tracked using the position and momentum of their center of mass, while their rotational dynamics is modeled by representing their orientation through the use of quaternions, similarly to the case of rigid bodies. The associated force and torque controlling the motion are derived from atomistic molecular dynamics (MD) simulations via a bottom-up approach and define a coarse-grained potential. The assumptions of the model are clearly stated and checked for a reference system of a cis-1,4-polybutadiene melt. In particular, the choice of the angular velocity as a slow variable is justified by comparing its dynamics to atomic vibrations. The accuracy of this approach to reproduce static structural features of the polymer melt is assessed.

A one-dimensional flow model enhanced by machine learning for simulation of vocal fold vibration.

A one-dimensional (1D) unsteady and viscous flow model that is derived from the momentum and mass conservation equations is described, and to enhance this physics-based model, a machine learning approach is used to determine the unknown modeling parameters. Specifically, an idealized larynx model is constructed and ten cases of three-dimensional (3D) fluid-structure interaction (FSI) simulations are performed. The flow data are then extracted to train the 1D flow model using a sparse identification approach for nonlinear dynamical systems. As a result of training, we obtain the analytical expressions for the entrance effect and pressure loss in the glottis, which are then incorporated in the flow model to conveniently handle different glottal shapes due to vocal fold vibration. We apply the enhanced 1D flow model in the FSI simulation of both idealized vocal fold geometries and subject-specific anatomical geometries reconstructed from the magnetic resonance imaging images of rabbits' larynges. The 1D flow model is evaluated in both of these setups and shown to have robust performance. Therefore, it provides a fast simulation tool that is superior to the previous 1D models.

Preventing iron(ii) precipitation in aqueous systems using polyacrylic acid: some molecular insights.

We present molecular dynamics simulations of aqueous iron(ii) systems in the presence of polyacrylic acid (PAA) under the extreme conditions that take place in the secondary coolant circuit of a nuclear power plant. The aim of this work is to understand how the oligomer can prevent iron(ii) deposits, and to provide molecular interpretation. We show how, to this end, not only the complexant ability is necessary, but also the chain length compared to iron(ii) concentration. When the chain is long enough, a hyper-complexation phenomenon occurs that can explain the specific capacity of the polymer to prevent iron(ii) precipitation.

Recovery of Vocal Fold Epithelium after Acute Phonotrauma.

We investigated the timeline of tissue repair of vocal fold epithelium after acute vibration exposure using an in vivo rabbit model. Sixty-five New Zealand white breeder rabbits were randomized to 120 min of modal- or raised-intensity phonation. After the larynges were harvested at 0, 4, 8, and 24 h, and at 3 and 7 days, the vocal fold tissue was evaluated using electron microscopy and quantitative real-time polymerase chain reaction. There was an immediate decrease in the microprojection depth and height following raised-intensity phonation, paired with upregulation of cyclooxygenase-2. This initial 24-h period was also characterized by the significant downregulation of junction proteins. Interleukin 1ß and transforming growth factor ß1 were upregulated for 3 and 7 days, respectively, followed by an increase in epithelial cell surface depth at 3 and 7 days. These data appear to demonstrate a shift from inflammatory response to the initiation of a restorative process in the vocal fold epithelium between 24 h and 3 days. Despite the initial damage from raised-intensity phonation, the vocal fold epithelium demonstrates a remarkable capacity for the expeditious recovery of structural changes from transient episodes of acute phonotrauma. While structurally intact, the return of functional barrier integrity may be delayed by repeated episodes of phonotrauma and may also play an important role in the pathophysiology of vocal fold lesions.

Bimodal fluorescence/129Xe NMR probe for molecular imaging and biological inhibition of EGFR in Non-Small Cell Lung Cancer.

Although Non-Small Cell Lung Cancer (NSCLC) is one of the main causes of cancer death, very little improvement has been made in the last decades regarding diagnosis and outcomes. In this study, a bimodal fluorescence/129Xe NMR probe containing a xenon host, a fluorescent moiety and a therapeutic antibody has been designed to target the Epidermal Growth Factor Receptors (EGFR) overexpressed in cancer cells. This biosensor shows high selectivity for the EGFR, and a biological activity similar to that of the antibody. It is detected with high specificity and high sensitivity (sub-nanomolar range) through hyperpolarized 129Xe NMR. This promising system should find important applications for theranostic use.

Coarse-grained simulations of cis- and trans-polybutadiene: A bottom-up approach.

We apply the dissipative particle dynamics strategy proposed by Hijón et al. [Faraday Discuss. 144, 301-322 (2010)] and based on an exact derivation of the generalized Langevin equation to cis- and trans-1,4-polybutadiene. We prove that it is able to reproduce not only the structural but also the dynamical properties of these polymers without any fitting parameter. A systematic study of the effect of the level of coarse-graining is done on cis-1,4-polybutadiene. We show that as the level of coarse-graining increases, the dynamical properties are better and better reproduced while the structural properties deviate more and more from those calculated in molecular dynamics (MD) simulations. We suggest two reasons for this behavior: the Markovian approximation is better satisfied as the level of coarse-graining increases, while the pair-wise approximation neglects important contributions due to the relative orientation of the beads at large levels of coarse-graining. Finally, we highlight a possible limit of the Markovian approximation: the fact that in constrained simulations, in which the centers-of-mass of the beads are kept constant, the bead rotational dynamics become extremely slow.

Evaluation of Dying Vocal Fold Epithelial Cells by Ultrastructural Features and TUNEL Method.

Cell death is a regulated mechanism of eliminating cells to maintain tissue homeostasis. This study described 2 methodological procedures for evaluating cell death in the epithelium of immobilized, approximated and vibrated vocal folds from 12 New Zealand white breeder rabbits. The gold standard technique of transmission electron microscopy evaluated high-quality ultrastructural criteria of cell death and a common immunohistochemical marker, the terminal deoxynucleotidyl transferase dUTP nick end labeling method, to confirm cell death signaling. Results revealed that ultrastructural characteristics of apoptotic cell death, specifically condensed chromatin and apoptotic bodies, were observed after vocal fold vibration and approximation. Although episodes of necrosis were rare, few enlarged cell nuclei were present after vibration and approximation. The vocal fold expresses an immunohistochemical marker for apoptosis along the apical surface of the epithelium. This study provides a solid foundation for future investigations regarding the role of cell death in vocal fold health and disease.

Subject-Specific Computational Modeling of Evoked Rabbit Phonation.

When developing high-fidelity computational model of vocal fold vibration for voice production of individuals, one would run into typical issues of unknown model parameters and model validation of individual-specific characteristics of phonation. In the current study, the evoked rabbit phonation is adopted to explore some of these issues. In particular, the mechanical properties of the rabbit's vocal fold tissue are unknown for individual subjects. In the model, we couple a 3D vocal fold model that is based on the magnetic resonance (MR) scan of the rabbit larynx and a simple one-dimensional (1D) model for the glottal airflow to perform fast simulations of the vocal fold dynamics. This hybrid three-dimensional (3D)/1D model is then used along with the experimental measurement of each individual subject for determination of the vocal fold properties. The vibration frequency and deformation amplitude from the final model are matched reasonably well for individual subjects. The modeling and validation approaches adopted here could be useful for future development of subject-specific computational models of vocal fold vibration.

Isotopic Soret effect in ternary mixtures: Theoretical predictions and molecular simulations.

In this paper, we study the Soret effect in ternary fluid mixtures of isotopic argon like atoms. Soret coefficients have been computed using non-equilibrium molecular dynamics and a theoretical approach based on our extended Prigogine model (with mass effect) and generalized to mixtures with any number of components. As is well known for binary mixture studies, the heaviest component always accumulates on the cold side whereas the lightest species accumulate on the hot side. An interesting behavior is observed for the species with the intermediate mass: it can accumulate on both sides, depending on composition and mass ratios. A simple picture can be given to understand this change of sign: the intermediate mass species can be seen as evolving in an equivalent fluid whose species mass varies with composition. An excellent prediction of all simulated data has been obtained using our model including the change of sign of the Soret coefficient for species with intermediate mass.

Efficient tritiation of the translocator protein (18 kDa) selective ligand DPA-714.

DPA-714 (N,N-diethyl-2-(2-(4-(2-fluoroethoxy)phenyl)-5,7-dimethylpyrazolo[1,5-a]pyrimidin-3-yl)acetamide) is a recently discovered fluorinated ligand of the translocator protein 18 kDa (TSPO). Labelled with the short-lived positron emitter fluorine-18, this structure is today the radioligand of reference for in vivo imaging of microglia activation and neuroinflammatory processes with positron emission tomography. In the present work, an isotopically tritium-labelled version was developed ([(3) H]DPA-714), in order to access high resolution in vitro and ex vivo microscopic autoradiography studies, repeated and long-lasting receptor binding studies and in vivo pharmacokinetic determination at late time points. Briefly, DPA-714 as reference, and its 3,5-dibrominated derivative as precursor for labelling, were both prepared from DPA-713 in nonoptimized 32% (two steps) and 10% (three steps) yields, respectively. Reductive debromination using deuterium gas and Pd/C as catalyst in methanol, performed at the micromolar scale, confirmed the regioselective introduction of two deuterium atoms at the meta positions of the phenyl ring. Tritiodebromination was analogously performed using no-carrier tritium gas. HPLC purification provided >96% radiochemically pure [(3) H]DPA-714 (7 GBq) with a 2.1 TBq/mmol specific radioactivity. Interestingly, additional hydrogen-for-tritium exchanges were also observed at the 5-methyl and 7-methyl positions of the pyrazolo[1,5-a]pyrimidine, opening novel perspectives in the labelling of compounds featuring this heterocyclic core.

Enantiospecific C-H Activation Using Ruthenium Nanocatalysts.

The activation of C-H bonds has revolutionized modern synthetic chemistry. However, no general strategy for enantiospecific C-H activation has been developed to date. We herein report an enantiospecific C-H activation reaction followed by deuterium incorporation at stereogenic centers. Mechanistic studies suggest that the selectivity for the α-position of the directing heteroatom results from a four-membered dimetallacycle as the key intermediate. This work paves the way to novel molecular chemistry on nanoparticles.

Discovery of compounds blocking the proliferation of Toxoplasma gondii and Plasmodium falciparum in a chemical space based on piperidinyl-benzimidazolone analogs.

A piperidinyl-benzimidazolone scaffold has been found in the structure of different inhibitors of membrane glycerolipid metabolism, acting on enzymes manipulating diacylglycerol and phosphatidic acid. Screening a focus library of piperidinyl-benzimidazolone analogs might therefore identify compounds acting against infectious parasites. We first evaluated the in vitro effects of (S)-2-(dibenzylamino)-3-phenylpropyl 4-(1,2-dihydro-2-oxobenzo[d]imidazol-3-yl)piperidine-1-carboxylate (compound 1) on Toxoplasma gondii and Plasmodium falciparum. In T. gondii, motility and apical complex integrity appeared to be unaffected, whereas cell division was inhibited at compound 1 concentrations in the micromolar range. In P. falciparum, the proliferation of erythrocytic stages was inhibited, without any delayed death phenotype. We then explored a library of 250 analogs in two steps. We selected 114 compounds with a 50% inhibitory concentration (IC50) cutoff of 2 µM for at least one species and determined in vitro selectivity indexes (SI) based on toxicity against K-562 human cells. We identified compounds with high gains in the IC50 (in the 100 nM range) and SI (up to 1,000 to 2,000) values. Isobole analyses of two of the most active compounds against P. falciparum indicated that their interactions with artemisinin were additive. Here, we propose the use of structure-activity relationship (SAR) models, which will be useful for designing probes to identify the target compound(s) and optimizations for monotherapy or combined-therapy strategies.

Smart detection of toxic metal ions, Pb2+ and Cd2+, using a 129Xe NMR-based sensor.

An approach for sensitive magnetic resonance detection of metal cations is proposed. Combining the use of hyperpolarized (129)Xe NMR and of a cage-molecule functionalized by a ligand able to chelate different cations, we show that simultaneous detection of lead, zinc, and cadmium ions at nanomolar concentration is possible in short time, thanks to fast MRI sequences based on the HyperCEST scheme.

Parameterization of a mesoscopic model for the self-assembly of linear sodium alkyl sulfates.

A systematic approach to develop mesoscopic models for a series of linear anionic surfactants (CH3(CH2)n - 1OSO3Na, n = 6, 9, 12, 15) by dissipative particle dynamics (DPD) simulations is presented in this work. The four surfactants are represented by coarse-grained models composed of the same head group and different numbers of identical tail beads. The transferability of the DPD model over different surfactant systems is carefully checked by adjusting the repulsive interaction parameters and the rigidity of surfactant molecules, in order to reproduce key equilibrium properties of the aqueous micellar solutions observed experimentally, including critical micelle concentration (CMC) and average micelle aggregation number (Nag). We find that the chain length is a good index to optimize the parameters and evaluate the transferability of the DPD model. Our models qualitatively reproduce the essential properties of these surfactant analogues with a set of best-fit parameters. It is observed that the logarithm of the CMC value decreases linearly with the surfactant chain length, in agreement with Klevens' rule. With the best-fit and transferable set of parameters, we have been able to calculate the free energy contribution to micelle formation per methylene unit of -1.7 kJ/mol, very close to the experimentally reported value.

Conservative and dissipative force field for simulation of coarse-grained alkane molecules: a bottom-up approach.

We apply operational procedures available in the literature to the construction of coarse-grained conservative and friction forces for use in dissipative particle dynamics (DPD) simulations. The full procedure rely on a bottom-up approach: large molecular dynamics trajectories of n-pentane and n-decane modeled with an anisotropic united atom model serve as input for the force field generation. As a consequence, the coarse-grained model is expected to reproduce at least semi-quantitatively structural and dynamical properties of the underlying atomistic model. Two different coarse-graining levels are studied, corresponding to five and ten carbon atoms per DPD bead. The influence of the coarse-graining level on the generated force fields contributions, namely, the conservative and the friction part, is discussed. It is shown that the coarse-grained model of n-pentane correctly reproduces self-diffusion and viscosity coefficients of real n-pentane, while the fully coarse-grained model for n-decane at ambient temperature over-predicts diffusion by a factor of 2. However, when the n-pentane coarse-grained model is used as a building block for larger molecule (e.g., n-decane as a two blobs model), a much better agreement with experimental data is obtained, suggesting that the force field constructed is transferable to large macro-molecular systems.

Control of peptide nanotube diameter by chemical modifications of an aromatic residue involved in a single close contact.

Supramolecular self-assembly is an attractive pathway for bottom-up synthesis of novel nanomaterials. In particular, this approach allows the spontaneous formation of structures of well-defined shapes and monodisperse characteristic sizes. Because nanotechnology mainly relies on size-dependent physical phenomena, the control of monodispersity is required, but the possibility of tuning the size is also essential. For self-assembling systems, shape, size, and monodispersity are mainly settled by the chemical structure of the building block. Attempts to change the size notably by chemical modification usually end up with the loss of self-assembly. Here, we generated a library of 17 peptides forming nanotubes of monodisperse diameter ranging from 10 to 36 nm. A structural model taking into account close contacts explains how a modification of a few Å of a single aromatic residue induces a fourfold increase in nanotube diameter. The application of such a strategy is demonstrated by the formation of silica nanotubes of various diameters.

Regioselective and stereospecific deuteration of bioactive aza compounds by the use of ruthenium nanoparticles.

An efficient H/D exchange method allowing the deuteration of pyridines, quinolines, indoles, and alkyl amines with D2 in the presence of Ru@PVP nanoparticles is described. By a general and simple procedure involving mild reaction conditions and simple filtration to recover the labeled product, the isotopic labeling of 22 compounds proceeded in good yield with high chemo- and regioselectivity. The viability of this procedure was demonstrated by the labeling of eight biologically active compounds. Remarkably, enantiomeric purity was conserved in the labeled compounds, even though labeling took place in the vicinity of the stereogenic center. The level of isotopic enrichment observed is suitable for metabolomic studies in most cases. This approach is also perfectly adapted to tritium labeling because it uses a gas as an isotopic source. Besides these applications to molecules of biological interest, this study reveals a rich and underestimated chemistry on the surface of ruthenium nanoparticles.