Tuning Chemoenzymatic Pd/Laccase Conformation Toward Optimized Heterogeneous Aerobic Oxidation.

Heterogeneous chemoenzymatic catalysts differing in their spatial organization and relative orientation of their enzymatic laccase and Pd units confined into macrocellular silica foams were tested on veratryl alcohol oxidation. When operating under continuous flow, we show that the catalytic efficiency of hybrids is significantly enhanced when the Pd(II) complex is combined with a laccase exhibiting a surface located lysine next to the T1 oxidation site of the enzyme.

Investigation of dirigent like domains from bacterial genomes.

BACKGROUND: DIRs are mysterious protein that have the ability to scavenge free radicals, which, are highly reactive with molecules in their vicinity. What is even more fascinating is that they carry out from these highly unstable species, a selective reaction (i.e., stereoenantioselective) from a well-defined substrate to give a very precise product. Unfortunately, to date, only three products have been demonstrated following studies on DIRs from the plant world, which until now was the kingdom where these proteins had been demonstrated. Within this kingdom, each DIR protein has its own type of substrate. The products identified to date, have on the other hand, a strong economic impact: in agriculture for example, the biosynthesis of (+)-gossypol could be highlighted (a repellent antifood produced by the cotton plant) by the DIRs of cotton. In forsythia plant species, it is the biosynthesis of (-)-pinoresinol, an intermediate leading to the synthesis of podophyllotoxine (a powerful anicancerous agent) which has been revealed. Recently, a clear path of study, potentially with strong impact, appeared by the hypothesis of the potential existence of protein DIR within the genomes of prokaryotes. The possibility of working with this type of organism is an undeniable advantage: since many sequenced genomes are available and the molecular tools are already developed. Even easier to implement and working on microbes, of less complex composition, offers many opportunities for laboratory studies. On the other hand, the diversity of their environment (e.g., soil, aquatic environments, extreme environmental conditions (pH, temperature, pressure) make them very diverse and varied subjects of study. Identifying new DIR proteins from bacteria means identifying new substrate or product molecules from these organisms. It is the promise of going further in understanding the mechanism of action of these proteins and this will most likely have a strong impact in the fields of agricultural, pharmaceutical and/or food chemistry. RESULTS: Our goal is to obtain as much information as possible about these proteins to unlock the secrets of their exceptional functioning. Analyzes of structural and functional genomic data led to the identification of the Pfam PF03018 domain as characteristic of DIR proteins. This domain has been further identified in the sequence of bacterial proteins therefore named as DIR-like (DIRL). We have chosen a multidisciplinary bioinformatic approach centered on bacterial genome identification, gene expression and regulation signals, protein structures, and their molecular information content. The objective of this study was to perform a thorough bioinformatic analysis on these DIRLs to highlight any information leading to the selection of candidate bacteria for further cloning, purification, and characterization of bacterial DIRs. CONCLUSIONS: From studies of DIRL genes identification, primary structures, predictions of their secondary and tertiary structures, prediction of DIRL signals sequences, analysis of their gene organization and potential regulation, a list of primary bacterial candidates is proposed.

Coniferyl Alcohol Radical Detection by the Dirigent Protein AtDIR6 Monitored by EPR.

Plant dirigent proteins (DIRs) control the stereoselectivity of the monolignol coniferyl alcohol radical coupling. The main mechanistic hypothesis on this chemo- and stereoselective reaction invokes a binding of coniferyl alcohol radical substrates in the dirigent protein active site so that only one enantiomeric form can be produced. We have studied the influence of the Arabidopsis thaliana AtDIR6 protein on the transient coniferyl alcohol radical by EPR. Herein, we show that AtDIR6 stabilizes coniferyl alcohol radicals prior to directing their coupling towards the formation of (-)-pinoresinol.

Clicked Bifunctional Dendrimeric and Cyclopeptidic Addressable Redox Scaffolds for the Functionalization of Carbon Nanotubes with Redox Molecules and Enzymes.

Carbon nanotube electrodes were modified with ferrocene and laccase using two different click reactions strategies and taking advantage of bifunctional dendrimers and cyclopeptides. Using diazonium functionalization and the efficiency of oxime ligation, the combination of both multiwalled carbon nanotube surfaces and modified dendrimers or cyclopeptides allows the access to a high surface coverage of ferrocene in the order of 50 nmol cm-2, a 50-fold increase compared to a classic click reaction without oxime ligation of these highly branched macromolecules. Furthermore, this original immobilization strategy allows the immobilization of mono- and bi-functionalized active multicopper enzymes, laccases, via copper(I)-catalyzed azide-alkyne cycloaddition. Electrochemical studies underline the high efficiency of the oxime-ligated dendrimers or cyclopeptides for the immobilization of redox entities on surfaces while being detrimental to electron tunneling with enzyme active sites despite controlled orientation.

Efficiency of Site-Specific Clicked Laccase-Carbon Nanotubes Biocathodes towards O2 Reduction.

A maximization of a direct electron transfer (DET) between redox enzymes and electrodes can be obtained through the oriented immobilization of enzymes onto an electroactive surface. Here, a strategy for obtaining carbon nanotube (CNTs) based electrodes covalently modified with perfectly control-oriented fungal laccases is presented. Modelizations of the laccase-CNT interaction and of electron conduction pathways serve as a guide in choosing grafting positions. Homogeneous populations of alkyne-modified laccases are obtained through the reductive amination of a unique surface-accessible lysine residue selectively engineered near either one or the other of the two copper centers in enzyme variants. Immobilization of the site-specific alkynated enzymes is achieved by copper-catalyzed click reaction on azido-modified CNTs. A highly efficient reduction of O2 at low overpotential and catalytic current densities over -3 mA cm-2 are obtained by minimizing the distance from the electrode surface to the trinuclear cluster.

Mercury Trithiolate Binding (HgS3) to a de Novo Designed Cyclic Decapeptide with Three Preoriented Cysteine Side Chains.

Mercury(II) is an unphysiological soft ion with high binding affinity for thiolate ligands. Its toxicity lies in the interactions with low molecular weight thiols including glutathione and cysteine-containing proteins that disrupt the thiol balance and alter vital functions. However, mercury can also be detoxified via interactions with Hg(II)-responsive regulatory proteins such as MerR, which coordinates Hg(II) with three cysteine residues in a trigonal planar fashion (HgS3 coordination). The model cyclodecapeptide P3C, c(GCTCSGCSRP) was designed to promote Hg(II) chelation in a HgS3 coordination environment through the parallel orientation of three cysteine side chains. The binding motif is derived from the dicysteine P2C cyclodecapeptide validated previously as a model for d10 metal transporters containing the binding sequence CxxC. The formation of the mononuclear HgP3C complex with a HgS3 coordination is demonstrated using electrospray ionization mass spectrometry, UV absorption, and 199Hg NMR. Hg LIII-edge extended X-ray absorption fine structure (EXAFS) spectroscopy indicates that the Hg(II) coordination environment is T-shaped with two short Hg-S distances at 2.45 Å and one longer distance at 2.60 Å. The solution structure of the HgP3C complex was refined based on 1H-1H NMR constraints and EXAFS results. The cyclic peptide scaffold has a rectangular shape with the three binding cysteine side chains pointing toward Hg(II). The HgP3CH complex has a p Ka of 4.3, indicating that the HgS3 coordination mode is stable over a large range of pH. This low p Ka value suggests that the preorientation of the three cysteine groups is particularly well-achieved for Hg(II) trithiolate coordination in P3C.

Effect of the Peptidic Scaffold in Copper(II) Coordination and the Redox Properties of Short Histidine-Containing Peptides.

A linear decapeptide containing three His and one Asp residues and a ß-turn-inducing dProPro unit was synthesised. A detailed potentiometric, mass spectrometric and spectroscopic study showed that at a 1:1 ratio of CCu /Cpeptide this peptide formed a major [CuH(O(dPro)-Asp)](2+) species (pH range 5.5-7.0), in which the Cu(2+) ion was bound to the His and Asp residues in square-planar or square-pyramidal geometries. The stability constant corrected for protonated species (log K* CuH(O dPro-Asp)=9.33) is almost equal to the value obtained for the parent [CuH(OAsp)](2+) species (log K*CuH(O-Asp) =9.28), but lower than that obtained for the cyclic [CuH(C-Asp)](2+) complex (log K*CuH(C-Asp) =10.79) previously published. Thus, the replacement of the ProGly unit by the stronger ß-turn-inducing dProPro unit did not generate a more stable copper(II) species, although the O(dPro)-Asp peptide was structured in solution, as shown by circular dichroism (CD) spectroscopy. Interestingly, the calculated value of Keff showed that this peptide behaved similarly to the O-Asp or C-Asp counterparts, depending on the pH value. The cyclic voltammetry data indicated that the most easily reducible species were [CuH(O-Asp)](2+) (E'(0) =262 mV versus a normal hydrogen electrode (NHE)) and [CuH(O(dPro)-Asp)](2+) (E'(0) =294 mV versus NHE) complexes, the peptidic scaffolds of which are open. A lower value was obtained for [CuH(C-Asp)](2+) (E'(0) =24 mV versus NHE). A different degree of non-reversibility was observed for the three copper(II) complexes; this could reflect a different degree of flexibility in their respective peptidic scaffolds.

Structural and magnetic characterization of a tetranuclear copper(II) cubane stabilized by intramolecular metal cation-π interactions.

A novel tetranuclear copper(II) complex (1) was synthesized from the self-assembly of copper(II) perchlorate and the ligand N-benzyl-1-(2-pyridyl)methaneimine (L(1)). Single-crystal X-ray diffraction studies revealed that complex 1 consists of a Cu4(OH)4 cubane core, where the four copper(II) centers are linked by µ3-hydroxo bridges. Each copper(II) ion is in a distorted square-pyramidal geometry. X-ray analysis also evidenced an unusual metal cation-π interaction between the copper ions and phenyl substituents of the ligand. Calculations based on the density functional theory method were used to quantify the strength of this metal-π interaction, which appears as an important stabilizing parameter of the cubane core, possibly acting as a driving parameter in the self-aggregation process. In contrast, using the ligand N-phenethyl-1-(2-pyridyl)methaneimine (L(2)), which only differs from L(1) by one methylene group, the same synthetic procedure led to a binuclear bis(µ-hydroxo)copper(II) complex (2) displaying intermolecular π-π interactions or, by a slight variation of the experimental conditions, to a mononuclear complex (3). These complexes were studied by X-ray diffraction techniques. The magnetic properties of complexes 1 and 2 are reported and discussed.

Controlled Immobilization of a Palladium Complex/Laccase Hybrid into a Macrocellular Siliceous Host.

This study investigates the site-directed immobilization of a hybrid catalyst bearing a biquinoline-based-Pd(II) complex (1) and a robust laccase within cavities of a silica foam to favor veratryl alcohol oxidation. We performed the grafting of 1 at a unique surface located lysine of two laccase variants, either at closed (1⊂UNIK157 ) or opposite position (1⊂UNIK71 ) of the enzyme oxidation site. After immobilization into the cavities of silica monoliths bearing hierarchical porosity, we show that catalytic activity is dependent on the orientation and loading of each hybrid, 1⊂UNIK157 being twice as active than 1⊂UNIK71 (203 TON vs 100 TON) when operating under continuous flow. These systems can be reused 5 times, with an operational activity remaining as high as 40 %. We show that the synergy between 1 and laccase can be tuned within the foam. This work is a proof of concept for controlling the organization of a heterogeneous hybrid catalyst using a Pd/laccase/silica foam.

Tracking light-induced electron transfer toward O2 in a hybrid photoredox-laccase system.

Photobiocatalysis uses light to perform specific chemical transformations in a selective and efficient way. The intention is to couple a photoredox cycle with an enzyme performing multielectronic catalytic activities. Laccase, a robust multicopper oxidase, can be envisioned to use dioxygen as a clean electron sink when coupled to an oxidation photocatalyst. Here, we provide a detailed study of the coupling of a [Ru(bpy)3]2+ photosensitizer to laccase. We demonstrate that efficient laccase reduction requires an electron relay like methyl viologen. In the presence of dioxygen, electrons transiently stored in superoxide ions are scavenged by laccase to form water instead of H2O2. The net result is the photo accumulation of highly oxidizing [Ru(bpy)3]3+. This study provides ground for the use of laccase in tandem with a light-driven oxidative process and O2 as one-electron transfer relay and as four-electron substrate to be a sustainable final electron acceptor in a photocatalytic process.

Modulation of laccase catalysed oxidations at the surface of magnetic nanoparticles.

We explored the coupling of laccases to magnetic nanoparticles (MNPs) with different surface chemical coating. Two laccase variants offering two opposite and precise orientations of the substrate oxidation site were immobilised onto core-shell MNPs presenting either aliphatic aldehyde, aromatic aldehyde or azide functional groups at the particles surface. Oxidation capabilities of the six-resulting laccase-MNP hybrids were compared on ABTS and coniferyl alcohol. Herein, we show that the original interfaces created differ substantially in their reactivities with an amplitude from 1 to > 4 folds depending on the nature of the substrate. Taking enzyme orientation into account in the design of surface modification represents a way to introduce selectivity in laccase catalysed reactions.

The protein environment drives selectivity for sulfide oxidation by an artificial metalloenzyme.

MAGIC Mn-salen mETALLOZYME: The design of an original, artificial, inorganic, complex-protein adduct, has led to a better understanding of the synergistic effects of both partners. The exclusive formation of sulfoxides by the hybrid biocatalyst, as opposed to sulfone in the case of the free inorganic complex, highlights the modulating role of the inorganic-complex-binding site in the protein. Artificial metalloenzymes based on the incorporation of Mn-salen complexes into human serum albumin display high efficiency and selectivity for sulfoxide production during sulfide oxidation. The reactions carried out by the artificial metallozymes are comparable to those carried out by natural biocatalysis. We have found that the polarity of the protein environment is crucial for selectivity and that a synergy between both partners of the hybrid results in the novel activity.

Production and manipulation of blue copper oxidases for technological applications.

Fungal laccases are robust multicopper oxidoreductases. Perfectly amenable to synthetic evolution, the fungal laccase scaffold is a potential generic for the production of tailored biocatalysts, which, in principle, can be secreted at substantial levels in industrially relevant organisms. In this chapter, the strategy we have developed for the rapid production of hundreds of milligram of laccase variants is detailed. It is based on the use of two heterologous expression hosts: the yeast Saccharomyces cerevisiae for a rapid upstream screening and the fungus Aspergillus niger for downstream production. Methods for screening active and nonactive laccase variants, convenient setups for enzyme production in both organisms as well as a methodology for efficient purification of large amounts of recombinant enzymes are given. The general procedure for developing new materials for artificial catalysis is also described.

Visible-Light-Driven Oxidation of Organic Substrates with Dioxygen Mediated by a [Ru(bpy)3 ](2+) /Laccase System.

Oxidation reactions are highly important chemical transformations that still require harsh reaction conditions and stoichiometric amounts of chemical oxidants that are often toxic. To circumvent these issues, olefins oxidation is achieved in mild conditions upon irradiation of an aqueous solution of the complex [Ru(bpy)3 ](2+) and the enzyme laccase. Epoxide formation is coupled to the light-driven reduction of O2 by [Ru(bpy)3 ](2+) /laccase system. The reactivity can be explained by dioxygen acting both as an oxidative agent and as renewable electron acceptor, avoiding the use of a sacrificial electron acceptor.

Laccases as palladium oxidases.

The first example of a coupled catalytic system involving an enzyme and a palladium(ii) catalyst competent for the aerobic oxidation of alcohol in mild conditions is described. In the absence of dioxygen, the fungal laccase LAC3 is reduced by a palladium(0) species as evidenced by the UV/VIS and ESR spectra of the enzyme. During the oxidation of veratryl alcohol performed in water, at room temperature and atmospheric pressure, LAC3 regenerates the palladium catalyst, is reduced and catalyzes the four-electron reduction of dioxygen into water with no loss of enzyme activity. The association of a laccase with a water-soluble palladium complex results in a 7-fold increase in the catalytic efficiency of the complex. This is the first step in the design of a family of renewable palladium catalysts for aerobic oxidation.

Gram-scale production of a basidiomycetous laccase in Aspergillus niger.

We report on the expression in Aspergillus niger of a laccase gene we used to produce variants in Saccharomyces cerevisiae. Grams of recombinant enzyme can be easily obtained. This highlights the potential of combining this generic laccase sequence to the yeast and fungal expression systems for large-scale productions of variants.

Crystallographic snapshots of the reaction of aromatic C-H with O(2) catalysed by a protein-bound iron complex.

Chemical reactions inside single crystals are quite rare because crystallinity is difficult to retain owing to atomic rearrangements. Protein crystals in general have a high solvent content. This allows for some molecular flexibility, which makes it possible to trap reaction intermediates of enzymatic reactions without disrupting the crystal lattice. A similar approach has not yet been fully implemented in the field of inorganic chemistry. Here, we have combined model chemistry and protein X-ray crystallography to study the intramolecular aromatic dihydroxylation by an arene-containing protein-bound iron complex. The bound complex was able to activate dioxygen in the presence of a reductant, leading to the formation of catechol as the sole product. The structure determination of four of the catalytic cycle intermediates and the end product showed that the hydroxylation reaction implicates an iron peroxo, generated by reductive O(2) activation, an intermediate already observed in iron monooxygenases. This strategy also provided unexpected mechanistic details such as the rearrangement of the iron coordination sphere on metal reduction.

Model peptides based on the binding loop of the copper metallochaperone Atx1: selectivity of the consensus sequence MxCxxC for metal ions Hg(II), Cu(I), Cd(II), Pb(II), and Zn(II).

The amino acid sequence MxCxxC is conserved in many soft-metal transporters that are involved in the control of the intracellular concentration of ions such as Cu(I), Hg(II), Zn(II), Cd(II), and Pb(II). A relevant task is thus the selectivity of the motif MxCxxC for these different metal ions. To analyze the coordination properties and the selectivity of this consensus sequence, we have designed two model peptides that mimic the binding loop of the copper chaperone Atx1: the cyclic peptide P(C) c(GMTCSGCSRP) and its linear analogue P(L) (Ac-MTCSGCSRPG-NH2). By using complementary analytical and spectroscopic methods, we have demonstrated that 1:1 complexes are obtained with Cu(I) and Hg(II), whereas 1:1 and 1:2 (M:P) species are successively formed with Zn(II), Cd(II), and Pb(II). The complexation properties of the cyclic and linear peptides are very close, but the cyclic compound provides systematically higher affinity constants than its unstructured analogue. The introduction of a xPGx motif that forms a type II beta turn in P(C) induces a preorganization of the binding loop of the peptide that enhances the stabilities of the complexes (up to 2 orders of magnitude difference for the Hg complexes). The affinity constants were measured in the absence of any reducing agent that would compete with the peptides and range in the order Hg(II) > Cu(I) >> Cd(II) > Pb(II) > Zn(II). This sequence is thus highly selective for Cu(I) compared to the essential ion Zn(II) that could compete in vivo or compared to the toxic ions Cd(II) and Pb(II). Only Hg(II) may be an efficient competitor of Cu(I) for binding to the MxCxxC motif in metalloproteins.

Selective intracellular accumulation of the major metabolite issued from the activation of the prodrug ethionamide in mycobacteria.

BACKGROUND: Ethionamide is one of the most widely used drugs for the treatment of multidrug-resistant tuberculosis (MDR-TB). Like isoniazid, and pyrazinamide, ethionamide is a prodrug that needs to be activated by a mycobacterial enzyme. Activation pathways of prodrugs are generally problematic to uncover as they produce intermediates potentially difficult to characterize, to purify and that might prove unstable outside of their cellular context. OBJECTIVES AND METHODS: We have used high resolution magic angle spinning-NMR (HRMAS-NMR) to follow ethionamide activation directly within living mycobacterial cells. RESULTS: Data indicated that the intracellular metabolization of ethionamide strictly depends on the presence of the monooxygenase EthA and that EthA-dependent activation of ethionamide is coupled to a precise molecular sorting mechanism of the ethionamide metabolites. We found that the previously identified ethionamide metabolite 2-ethyl-4-hydroxymethylpyridine is produced in substantial amounts by the ethionamide-treated mycobacteria and that it is present exclusively outside of the bacteria. In contrast, the still unidentified ethionamide metabolite ETH* is the only ethionamide derivative detected within the bacterial cell. Moreover, ETH* appears to be unable to cross the bacterial envelope and consequently accumulates within the cytoplasm of the ethionamide-treated mycobacteria. CONCLUSIONS: These results strongly suggest that ETH* is the active antimycobacterial ethionamide derivative and open new perspectives for the understanding of the mode of action of prodrugs.

Monitoring of the ethionamide pro-drug activation in mycobacteria by (1)H high resolution magic angle spinning NMR.

In this study, we use HRMAS NMR as a non-invasive technique to monitor the in vivo metabolism of a xenobiotic. The antituberculosis Ethionamide is a pro-drug that has to be activated in mycobacteria before inhibiting its cellular target. The use of (1)H HRMAS NMR has allowed to detect a metabolite (ETH*) of the drug directly in living bacteria, even with a spectrometer operating at the relatively low magnetic field of 300MHz. We show that metabolism monitoring of an unlabelled drug at a therapeutically relevant concentration as low as 5mug/ml is within reach of the technique. (1)H HRMAS NMR in combination with diffusion filtering leads to the conclusion that the metabolite is located inside the intact cells. The comparison of the metabolite NMR signature with that of synthetic molecules proves the non-identity of ETH* with the ETH derivatives described previously in the literature.