Dehydropolymerization of Amine-Boranes using Bis(imino)pyridine Rhodium Pre-Catalysis: σ-Amine-Borane Complexes, Nanoparticles, and Low Residual-Metal BN-Polymers that can be Chemically Repurposed.

The sigma amine-borane complexes [Rh(L1)(η2 :η2 -H3 B⋅NRH2 )][OTf] (L1=2,6-bis-[1-(2,6-diisopropylphenylimino)ethyl]pyridine, R=Me, Et, n Pr) are described, alongside [Rh(L1)(NMeH2 )][OTf]. Using R=Me as a pre-catalyst (1 mol %) the dehydropolymerization of H3 B ⋅ NMeH2 gives [H2 BNMeH]n selectively. Added NMeH2 , or the direct use of [Rh(L1)(NMeH2 )][OTf], is required for initiation of catalysis, which is suggested to operate through the formation of a neutral hydride complex, Rh(L1)H. The formation of small (1-5 nm) nanoparticles is observed at the end of catalysis, but studies are ambiguous as to whether the catalysis is solely nanoparticle promoted or if there is a molecular homogeneous component. [Rh(L1)(NMeH2 )][OTf] is shown to operate at 0.025 mol % loadings on a 2 g scale of H3 B ⋅ NMeH2 to give polyaminoborane [H2 BNMeH]n [Mn =30,900 g/mol, Ð=1.8] that can be purified to a low residual [Rh] (6 µg/g). Addition of Na[N(SiMe3 )2 ] to [H2 BNMeH]n results in selective depolymerization to form the eee-isomer of N,N,N-trimethylcyclotriborazane [H2 BNMeH]3 : the chemical repurposing of a main-group polymer.

Isolation of a Cu-H Monomer Enabled by Remote Steric Substitution of a N-Heterocyclic Carbene Ligand: Stoichiometric Insertion and Catalytic Hydroboration of Internal Alkenes.

Transient Cu-H monomers have long been invoked in the mechanisms of substrate insertion in Cu-H catalysis. Their role from Cu-H aggregates has been mostly inferred since ligands to stabilize these monomeric intermediates for systematic studies remain limited. Within the last decade, new sterically demanding N-heterocyclic carbene (NHC) ligands have led to isolable Cu-H dimers and, in some cases, spectroscopic characterization of Cu-H monomers in solution. We report an NHC ligand, IPr*R, containing para R groups of CHPh2 and CPh3 on the ligand periphery for the isolation of a Cu-H monomer for insertion of internal alkenes. This reactivity has not been reported for (NHC)CuH complexes despite their common application in Cu-H-catalyzed hydrofunctionalization. Changing from CHPh2 to CPh3 impacts the relative concentration of Cu-H monomers, rate of alkene insertion, and reaction of a trisubstituted internal alkene. Specifically, for R = CPh3, monomeric (IPr*CPh3)CuH was isolated and provided >95% monomer (10 mM in C6D6). In contrast, for R = CHPh2, solutions of [(IPr*CHPh2)CuH]2 are 80% dimer and 20% (IPr*CHPh2)CuH monomer at 25 °C based on 1H, 13C, and 1H-13C HMBC NMR spectroscopy. Quantitative 1H NMR kinetic studies on cyclopentene insertion into Cu-H complexes to form the corresponding Cu-cyclopentyl complexes demonstrate a strong dependence on the rate of insertion and concentration of the Cu-H monomer. Only (IPr*CPh3)CuH, which has a high monomer concentration, underwent regioselective insertion of a trisubstituted internal alkene, 1-methylcyclopentene, to give (IPr*CPh3)Cu(2-methylcyclopentyl), which has been crystallographically characterized. We also demonstrated that (IPr*CPh3)CuH catalyzes the hydroboration of cyclopentene and methylcyclopentene with pinacolborane.

Controlled Synthesis of Well-Defined Polyaminoboranes on Scale Using a Robust and Efficient Catalyst.

The air tolerant precatalyst, [Rh(L)(NBD)]Cl ([1]Cl) [L = κ3-(iPr2PCH2CH2)2NH, NBD = norbornadiene], mediates the selective synthesis of N-methylpolyaminoborane, (H2BNMeH)n, by dehydropolymerization of H3B·NMeH2. Kinetic, speciation, and DFT studies show an induction period in which the active catalyst, Rh(L)H3 (3), forms, which sits as an outer-sphere adduct 3·H3BNMeH2 as the resting state. At the end of catalysis, dormant Rh(L)H2Cl (2) is formed. Reaction of 2 with H3B·NMeH2 returns 3, alongside the proposed formation of boronium [H2B(NMeH2)2]Cl. Aided by isotopic labeling, Eyring analysis, and DFT calculations, a mechanism is proposed in which the cooperative "PNHP" ligand templates dehydrogenation, releasing H2B═NMeH (ΔG‡calc = 19.6 kcal mol-1). H2B═NMeH is proposed to undergo rapid, low barrier, head-to-tail chain propagation for which 3 is the catalyst/initiator. A high molecular weight polymer is formed that is relatively insensitive to catalyst loading (Mn ∼71 000 g mol-1; D, of ∼ 1.6). The molecular weight can be controlled using [H2B(NMe2H)2]Cl as a chain transfer agent, Mn = 37 900-78 100 g mol-1. This polymerization is suggested to arise from an ensemble of processes (catalyst speciation, dehydrogenation, propagation, chain transfer) that are geared around the concentration of H3B·NMeH2. TGA and DSC thermal analysis of polymer produced on scale (10 g, 0.01 mol % [1]Cl) show a processing window that allows for melt extrusion of polyaminoborane strands, as well as hot pressing, drop casting, and electrospray deposition. By variation of conditions in the latter, smooth or porous microstructured films or spherical polyaminoboranes beads (∼100 nm) result.

A simple cobalt-based catalyst system for the controlled dehydropolymerisation of H3B·NMeH2 on the gram-scale.

A simple Co(ii)-based amine-borane dehydropolymerisation catalyst system is reported that operates at low loadings, to selectively give (H2BNMeH)n polymer on scale, with catalyst control over Mn, narrow dispersities and low residual metal content.

Dehydropolymerization of H3B·NMeH2 Using a [Rh(DPEphos)]+ Catalyst: The Promoting Effect of NMeH2.

[Rh(κ2-PP-DPEphos){η2η2-H2B(NMe3)(CH2)2 tBu}][BArF 4] acts as an effective precatalyst for the dehydropolymerization of H3B·NMeH2 to form N-methylpolyaminoborane (H2BNMeH) n . Control of polymer molecular weight is achieved by variation of precatalyst loading (0.1-1 mol %, an inverse relationship) and use of the chain-modifying agent H2: with M n ranging between 5 500 and 34 900 g/mol and D between 1.5 and 1.8. H2 evolution studies (1,2-F2C6H4 solvent) reveal an induction period that gets longer with higher precatalyst loading and complex kinetics with a noninteger order in [Rh]TOTAL. Speciation studies at 10 mol % indicate the initial formation of the amino-borane bridged dimer, [Rh2(κ2-PP-DPEphos)2(µ-H)(µ-H2BN=HMe)][BArF 4], followed by the crystallographically characterized amidodiboryl complex [Rh2(cis-κ2-PP-DPEphos)2(σ,µ-(H2B)2NHMe)][BArF 4]. Adding ∼2 equiv of NMeH2 in tetrahydrofuran (THF) solution to the precatalyst removes this induction period, pseudo-first-order kinetics are observed, a half-order relationship to [Rh]TOTAL is revealed with regard to dehydrogenation, and polymer molecular weights are increased (e.g., M n = 40 000 g/mol). Speciation studies suggest that NMeH2 acts to form the  precatalysts [Rh(κ2-DPEphos)(NMeH2)2][BArF 4] and [Rh(κ2-DPEphos)(H)2(NMeH2)2][BArF 4], which were independently synthesized and shown to follow very similar dehydrogenation kinetics, and produce polymers of molecular weight comparable with [Rh(κ2-PP-DPEphos){η2-H2B(NMe3)(CH2)2 tBu}][BArF 4], which has been doped with amine. This promoting effect of added amine in situ is shown to be general in other cationic Rh-based systems, and possible mechanistic scenarios are discussed.