Risk assessments of microplastics accumulated in estuarine sediments at Cuddalore, Tamil Nadu, southeast coast of India.

In this study, the abundance of microplastics (MPs) in the Uppanar and Gadilam estuaries in Cuddalore, on the southeast coast of India, is reported. In the estuarine sediments, MP abundance ranged from 36.3 ± 3.39 to 51.6 ± 2.05 particles/Kg dw. Different types of MP shapes, such as fibers (41.7-47.9%), films (21.2-27.2%), and fragments (18.3-25.5%) were observed in the size range of 100-1000 µm. Diverse colours of MPs were observed, among which red (30.1-34.5%) was predominantly noticed in the estuarine sediments. Six polymers were identified by µ-FTIR, among which LDPE (39%) and PP (35%) were dominant. MPs pollution in these estuaries is composed of domestic, industrial, and fishing wastes. Risk assessments show that the area falls under hazard categories I to III, indicating low to high risk. This study improves knowledge on MPs contamination in Uppanar and Gadilam estuaries and provides impetus for further research to identify the actual sources and impacts of MPs on aquatic systems along the east coast of India.

Polycyclic Aromatic Hydrocarbons (PAHs) and Hopanes in Plastic Resin Pellets as Markers of Oil Pollution via International Pellet Watch Monitoring.

Oil pollution in the marine environment is an unavoidable problem due to chronic input from local sources, particularly in urban areas and oil spills. Oil pollution not only causes immediate physical damages to surrounding wildlife but also some components, including higher molecular weight PAHs, can persist in the environment for many years and pose insidious threats to the ecosystem. Long-term and nontargeted monitoring of oil pollution is important. This paper examines the ability of International Pellet Watch (IPW) for initial identification and monitoring of oil pollution by analysing PAHs and hopanes in plastic pellet samples collected globally by volunteers. PAH concentrations with the sum of 28 parent and methyl PAHs vary geographically, ranging from 0.035 to 24.4 µg/g-pellet, in line with the presence or absence of local oil pollution sources, such as oil refineries or oil spill sites. This suggests that PAHs can be used to monitor petroleum pollution in IPW. A colour-coded categorization for PAH concentrations within IPW monitoring also is established to facilitate data presentation and understanding. PAH concentrations are generally higher in Western Europe, especially around the North Sea shorelines, moderate in East Asia and North America, and lower in South East Asia, Oceania, South America, and Africa. Hopane concentrations, with a smaller spatial variation (1.7-101 µg/g-pellet), showed no spatial pattern. This result and the poor correlation between hopanes and PAHs suggest that hopane concentrations alone are unsuited to identify petroleum pollution. However, hopane compositions can be used for fingerprinting sources of oil pollution. Thus, both PAHs and hopanes in IPW allow for low cost, remote monitoring of global oil pollution.

The consequences of reduced anthropogenic activities during the COVID-19 pandemic on microplastic abundance in a tropical estuarine region: Goa, India.

Plastic pollution is pervasive, as it has infiltrated every corner of the planet and the COVID-19 pandemic has caused a depletion in the production, consumption, and disposal of plastics. To find out the effect of the COVID-19 pandemic, a comparative assessment of microplastics (MPs) observed before and after the pandemic was evaluated in surface water and sediment from the major rivers of Goa, i.e. Mandovi and Zuari. To comprehend the relative difference in the abundance, characteristics, and source of MPs, samples were examined in both the dry and wet seasons. We found a sharp decrease in the concentration of MPs immediately after the isolated pandemic. During the dry and wet seasons, two to seven times less concentration of MPs was recorded for water and sediments after the pandemic period compared to the prior pandemic. MPs size, >300 µm were relatively abundant after the pandemic period in contrast to the prior pandemic (<300 µm sized MPs were more). Polyamide (PA), polyvinyl alcohol (PVAL), and polyvinyl chloride (PVC) were the dominant polymers after the pandemic whereas earlier the dominant polymers were polyacetylene, polyacrylamide (PAM), and polyvinyl pyrrolidone (PVP). The risk assessment of MPs in sediments (Polymer load index) was higher prior to the pandemic. The water quality parameters also indicated an improvement in the water quality during the pandemic. The present study clearly exhibited that due to the reduction of overall anthropogenic activities during the COVID-19 pandemic period, a sharp decline of plastic waste and MP abundance in the coastal water body in Goa, west coast of India was found. This study unveils the controlling factors (such as total solid waste generation, plastic waste, tourism activities, and the effect of monsoon) which influence the abundance and distribution of macro- and microplastics.

Identification and physico-chemical characterization of microplastics in marine aerosols over the northeast Arabian Sea.

Microplastics (MPs) in the atmosphere can undergo long-range transport from emission regions to pristine terrestrial and oceanic ecosystems. Due to their inherent toxic and hazardous characteristics, MPs pose serious risks to both human well-being and the equilibrium of ecosystem. The present study outlines the comprehensive characterization, spanning physical and chemical attributes of MPs associated with atmospheric aerosols. Total suspended particulates (TSPs) were collected on a quartz fibre filter by operating a high-volume sampler for 24 h during distinct years (March, 2016 and November, 2020) at a coastal location in the northeast Arabian Sea. Subsequent to the sampling, a series of techniques were applied including density separation. The assessment and scrutiny of the MPs was carried out using stereo-zoom microscopy with supplementary validation using advanced fluorescence microscopy for enhanced precision in identification. Our comparative assessment suggests peroxide treatment followed by density separation could be a robust procedure for the definitive identification and characterization of MPs in the atmosphere. Average total abundance of MPs was found to be 1.30 ± 0.14 n/m3 in 2016 and 1.46 ± 0.12 n/m3 in 2020 with fibres, fragments and films having similar relative contributions (41 %, 31 %, 28 % in 2016 and 40 %, 35 %, 25 % in 2020). Fibres were found to be dominant morphotype followed by fragments and films over the coastal region of the Arabian Sea. In order to unravel the detailed chemical nature of these MPs, spectral analysis using µ-FTIR was carried out. The outcome of the analysis showed prevailing polymers as polyvinyl chloride and polymethyl methacrylate (50545 %) as dominant polymers followed by polyester (15 %), styrene butyl methacrylate (11 %), and polyacetal (9 %). MPs present in the vicinity of the Arabian Sea have potential to supply nutrients and toxicants, consequently can contribute to the modulation of the surface water biogeochemical processes.

Unraveling the land-based discharge of microplastics from sewers to oceans - A comprehensive study and risk assessment in wastewaters of Goa, India.

Owing to their pervasive dispersion in the environment and their potential ramifications on both marine life and human health, microplastics (MPs) are of increasing concern. However, there is still a lack of research on the release of MPs from different land-based pathways like creeks, drainage outfalls, and conduits into coastal water systems in India. This study represents comprehensive research into the attribution of MPs in the estuarine system, specifically those emanating from wastewater sources in Panjim City, Goa, India. Urban wastewater collected from different locations in and around Panjim City exhibited values ranging from 79 ± 21 to 338 ± 7 MPs/L, with a prevalence of fibrous and black MP particles. The size range of the MPs at all sampling sites was 100-300 µm. Analysis by µ-FTIR revealed 35 distinct polymeric compositions in wastewater, with a dominance of polyacrylamide (PAM), polyvinyl chloride (PVC), and polyamide (PA). Additionally, primary and secondary MPs were studied to unravel the contributions from land-based sources. This included the quantification of MPs in ten samples from personal care products (PCPs) and twenty samples from washing machine effluents (WMEs). MPs in PCPs ranged from 1.8 to 1554 MPs/g. Microfibres and fragments were predominant in WMEs (3986 to 4898 MPs/L). This study suggests a strong relation between polymers found in wastewater effluent and those present in PCPs and WMEs. The identified polymers showed high polymer hazard indices (IV and V), posing a significant threat to the ecosystem and a potential risk to human health.

A comprehensive assessment of macro and microplastics from Rivers Ganga and Yamuna: Unveiling the seasonal, spatial and risk factors.

There have been growing apprehensions and concerns regarding the increasing presence of plastic pollutants in the holiest river of India, the Ganga, and its major tributary, Yamuna. In response to this issue, the current study aimed to conduct a comprehensive investigation of the seasonal and spatial distribution of macro to microplastics (MPs) in the surface water, water column, and sediments from the River Ganga and Yamuna. MP samples were collected from various points of these Rivers, including upstream, downstream, and drainage points around the vicinity of Haridwar, Agra, Prayagraj, and Patna cities. With a significant seasonal variation, the estimated MPs and plastic flux were higher during the wet season than during the dry season. MPs sized 300 µm-1 mm and fibre-shaped blue and black colored MPs were pre-dominant in both rivers. Polyacrylamide, polyamide, and polyvinyl chloride were the most ascertained polymers. MPs including hazardous polymers (hazard score >1000) may pose a risk to the population of Indo-Gangetic Plain via direct and indirect exposure to MPs. The information provided in this study could serve as a starting point for the action plan required by municipal corporations to mitigate plastic pollution and target the possible sources at each location.

Standardization of micro-FTIR methods and applicability for the detection and identification of microplastics in environmental matrices.

The ubiquity of microplastics (MPs) in the various environment is of increasing concern. Although micro Fourier Transform Infrared Spectroscopy (µ-FTIR) represents an ideal method for the detection of MPs, this technique lacks a standardized mode to be followed for MPs in diverse environmental matrices. The study focused on the optimization, application, and validation of µ-FTIR techniques for the identification of smaller-sized MPs (20 µm-1 mm). In order to assess the validity of the various detection modes in µ-FTIR (reflection and transmission), a confirmatory test with known standard polymers, viz., polyethylene (PE), polypropylene (PP), polystyrene (PS), polyamide (PA), and polyvinyl chloride (PVC) were executed. Subsequently, for the validation and accuracy of the method, the polymer spectra of standard polymers acquired in µ-FTIR (smaller-sized) were compared with spectra of larger-sized particles (same standards) in FTIR-ATR (Attenuated Total Reflectance). The spectra were comparable and highlighted the similar pattern of the polymeric composition. The spectral quality and matching score (>60 %) with the reference library was taken into account to accentuate the authenticity of the different methods. This study highlighted the reflection mode (particularly diffuse reflection) as more effective for the quantification of smaller-sized MPs in complex environmental samples. The same method was successfully applied to a representative environmental sample (sand), supplied by the EURO-QCHARM for inter-laboratory study. Two polymers (PE and PET) were correctly identified out of three spiked polymers (PE, PET, and PS) in the given sample. Similarly, in terms of matching algorithms, the results for diffuse reflection (PE-71.7 % and PET-89.1 %) were found satisfactory as compared to micro-ATR (PE-67 % and PET-63.2 %) reflection mode. Overall, this study illustrates an extensive perspective of different µ-FTIR techniques, recommending the most reliable, easy, and non-destructive method to unambiguously characterize diverse types of polymers of smaller MPs in complex environmental matrices.

Microplastic intrusion into the zooplankton, the base of the marine food chain: Evidence from the Arabian Sea, Indian Ocean.

Microplastics (MPs) are ubiquitous in the marine environment, yet information regarding their occurrence in the food web is limited. We investigated the concentration and composition of MPs in water and diverse zooplankton groups from the Arabian Sea basin. Forty-one zooplankton tows were collected with a bongo net (330 µm mesh) from the Arabian Sea in January 2019. MPs in the surface water varied between 0 and 0.055 particles/m3, with a relatively higher concentration (0.013 ± 0.002 particles/m3) in the central Arabian Sea. Though fibrous MPs were most abundant in the seawater (77.14 %), zooplankton prefers small fragments (55.3 %). The size of MPs was distinctly smaller (277.1 ± 46.74 µm) in zooplankton than that in seawater (864.32 ± 73.72 µm), and MPs bioaccumulation was observed in almost all the zooplankton functional groups. Polymer composition revealed polyamide, polyethylene, polypropylene, and PVC were abundant in water and zooplankton, suggesting that the textile, fishing, shipping, and packaging industries are significant sources. The prevailing northeasterly winds, strong West India Coastal Current, and conducive westward radiated Rossby wave during January 2019 have carried the microplastic contaminated water mass away from the coast, posing a threat to the open ocean ecosystems. These results demand further attention to investigate the state of plastic pollution in the Arabian Sea basin.

Seasonal variation and spatial distribution of microplastic pellets and their associated contaminants along the central east coast of India.

Microplastic pellets (MPPs) are one of the significant sources of plastic pollution on shorelines worldwide. In this study, for the first time, we have examined the occurrence of MPPs and their spatial and seasonal distributions, adsorbed contaminants, polymer composition, and ecological risks at eight renowned beaches of Andhra Pradesh, central east coast of India. A total of 3950 MPPs were collected from eight beaches along the central east coast of India during October 2020, representing pre-northeast monsoon (pNEM), and during January 2021, representing the northeast monsoon (NEM). The abundance of MPPs was higher during the NEM than those found in the pNEM. ATR-FTIR and SEM analyses were conducted to characterize the polymer types and weathering patterns of MPPs. Energy-Dispersive X-ray spectrometer (EDS) results show the MPP adsorbance of heavy metals such as Ni, Cr, Cu, Pb, and Zn. The degree of contamination and polymer hazard risks of MPPs were assessed using the pollution load index (PLI) and polymer hazard index (PHI). The conducive wind and currents during the NEM lead to higher MPP abundance than during the pNEM. However, the spatial variations of MPPs showed significant differences among the beaches. This study revealed that the presence of MPPs on the beaches along the central east coast of India might pose a considerable polymer hazard risk to the ecosystem. The substantial surface weathering features of MPPs would lead to more toxic nanoplastics in the future.

The polymers and their additives in particulate plastics: What makes them hazardous to the fauna?

Due to the increasing concerns on global ecosystems and human health, the environmental risks posed by microplastics (MPs) and nanoplastics (NPs) have become an important topic of research. Their ecological impacts on various faunal species have been extensively researched and reviewed. However, the majority of those studies perceive these micro(nano)-plastics (MNPs) as a single entity rather than a collective term for a group of chemically distinct polymeric particulates. Each of the plastic polymers can possess unique physical and chemical behavior, which, in turn, can determine the possible environmental impacts. Furthermore, many studies explore the adsorption, absorption, and release of other environmental pollutants by MNPs. But only a handful of them explore the leaching of additives possessed by these polymers. Data on the environmental behavior and toxicity of individual additives associated with different polymer particulates are scarce. Knowledge about the leachability and ecotoxicity of the additives associated with environmental MNPs (unlike large plastic particles) remains limited. The ecological impacts of different MNPs together with their additives and the basis of their toxicity have not been explored yet. The present review systematically explores the potential implications of environmentally predominant polymers and their associated additives and discusses their physicochemical characteristics. The review ultimately aims to provide novel insights on what components precisely make MNPs hazardous to the fauna. The paper also discusses the major challenges proposed in the available literature along with recommendations for future research to throw light on possible solutions to overcome the hazards of MNPs.

Levels, temporal trends, and tissue distribution of perfluorinated surfactants in freshwater fish from Asian countries.

Perfluorinated surfactants (PFSs) in Asian freshwater fish species were analyzed to investigate tissue distribution, temporal trends, extent of pollution, and level of PFS exposure through food intake. Freshwater fish species, namely carp, snakehead, and catfish, were collected in Japan, Vietnam, India, Malaysia, and Thailand, and 10 PFSs, including perfluorooctanesulfonate (PFOS) and perfluorooctanoate, were analyzed by liquid chromatography-tandem mass spectrometry. PFSs in carp in Tokyo were more concentrated in kidneys (Σ10 PFSs = 257 ± 95 ng/g wet weight [ww]) and livers (119 ± 36 ng/g ww) than in ovaries (43 ± 2 ng/g ww) and muscles (24 ± 17 ng/g ww). Concentrations of PFOS and its precursor, perfluorooctane sulfonamide, in livers of carp and in waters in Tokyo showed a dramatic decrease during the last decade, probably because of 3 M's phasing-out of the manufacture of perfluorooctanesulfonyl-fluoride-based products in 2000. In contrast, continuing contamination by long-chain perfluorocarboxylates (PFCAs) with ≥ 9 fluorinated carbons was seen in multiple media, suggesting that these compounds continue to be emitted. PFS concentrations in freshwater fish species in tropical Asian countries were generally lower than those in developed countries, such as Japan, e.g., for PFOS in muscle, Vietnam < 0.05-0.3 ng/g ww; India < 0.05-0.2 ng/g ww; Malaysia < 0.05-0.2 ng/g ww; Thailand < 0.05 ng/g ww; and Japan (Tokyo) = 5.1-22 ng/g ww. Daily intake of short-chain PFCAs with ≤ 8 fluorinated carbons from freshwater fish species in Japan was approximately one order of magnitude lower than that from drinking water, whereas daily intake of PFOS and long-chain PFCAs with ≥ 9 fluorinated carbons from freshwater fish species was comparable with or greater than that from drinking water. Because the risk posed by exposure to these compounds through intake of fish species is a matter of concern, we recommend the continued monitoring of PFS levels in Asian developing countries.

Microplastics as an emerging source of particulate air pollution: A critical review.

Accumulation of plastic litter exerts pressure on the environment. Microplastics (MPs) pollution has become a universal challenge due to the overexploitation of plastic products and unsystematic dumping of plastic waste. Initial studies on MPs and their implications had been confined to aquatic and terrestrial ecosystems, but recent research has also focused on MPs in the air. Their impacts on urban air quality and atmospheric transport to pristine habitats have emerged to be a serious concern. However, the extent and the significance of impacts of airborne particulate matter (PM) MPs on human health are not clearly understood. Further, the influence of airborne MPs on indoor and outdoor air quality remains unknown. We highlight the human health impacts of airborne PM-MPs with a special focus on the occupational safety of the industry workers, their possible influence on Air Quality Index (AQI), their potential exposure, and accumulation in the canopy/arboreal, above-canopy and atmospheric (aerial) habitats. The present review emphasizes the data limitations and knowledge gaps on the atmospheric transport and contribution of particulate plastics to the worsening of overall urban air quality and throws critical perspectives on whether atmospheric MPs pollution is trivial or an actual matter of concern.

Microplastics in seafood as an emerging threat to marine environment: A case study in Goa, west coast of India.

The present study exhibits the occurrence of MPs in different matrices (water, sediment and biota) from the Sal estuary, Goa, situated on the central west coast of India. The average numbers of MPs in the water column and sediment were 48 ± 19 MP particles/L (MPs/L) and 3950 ± 930 MP particles/kg (MPs/kg), respectively. In shellfish (whole soft tissue), the average concentrations of MPs were 4 ± 2 (Crassostrea sp.), 3.2 ± 1.8 (Perna viridis) and 0.7 ± 0.3 (Paphia malbarica) MPs/g body weight (bw), respectively. The highest MPs were recorded in finfish (gastro-intestinal tract) (Mugil cephalus)7.8 ± 4, followed by (Gerres filamentosus) 5.3 ± 4.9, (Arius jella) 4.6 ± 2.6, and (Etroplus suratensis)1.4 ± 0.3 MP/g bw. MP fibres were predominant in all matrices. Interestingly, a dominance of small sized (10-300 µm) MPs was recorded in biota. Among the 37 polymer types identified by µ-FTIR, the most prevalent ones were, polyacrylamide (PAM) , polyacetylene, ethylene vinyl alcohol (EVOH), polyvinyl chloride (PVC) and polyamide (nylon). Notably, the polymers dominant in the gut of finfish and in whole shellfish were equally prominent in sediment and the water column. This study highlights the presence of MPs in commercially important shellfish and finfish samples from the Sal estuary. This study clearly shows the presence of MPs in various types of marine organisms in the Sal estuary. As shellfish is locally consumed as a delicacy and plays a major role in the seafood industry, the MPs may pose a hazard for human health. There is also an ecological risk as MPs are also found in water and sediment and in the digestive tract of finfish.

Spatial and seasonal variation of microplastics and possible sources in the estuarine system from central west coast of India.

The versatile use of various synthetic polymers, including plastics, generates a large volume of non-degradable waste, which is eventually responsible for forming microplastics (MPs) in aquatic environments. The present study describes the significant spatial and seasonal variation on the abundance of MPs and their physiochemical nature along the Mandovi-Zuari estuarine system of Goa, west coast of India. During the wet season (September), the average abundance of MPs was found relatively higher in water (0.107 particles/m3) and sediment (7314 particles/kg) than those found in the dry season (April) (0.099 particles/m3 in water and 4873 particles/kg in sediment). During the wet season, heavy rain and excessive riverine freshwater influx carry more terrestrial plastic debris in the estuarine system which causes higher averages MPs density in surface water and sediment. <300 µm sized particles and black colored MPs were predominant equally in water and sediment during both seasons. MPs of different shapes like fragments, fibres, films and beads accounted for most collected samples. The Micro-Fourier Transform Infrared Spectroscopy (µ-FTIR) based compositional analysis identified approximately 33 types of polymers, of which polyacrylamide (PAM), polyacetylene, polyamide (PA), polyvinyl pyrrolidone (PVP), polyvinyl chloride (PVC), and polyimide (PI) were abundant. Fragmentation of larger plastic particles due to mismanaged treated and untreated STPs and washing machine effluents are the primary sources of these MPs in the estuarine system. Moreover, these estuaries also receive a variety of domestic, industrial and other wastes from local cities, ports, and fishing jetties. Thus the present study enlightens the current distribution of MPs and their sources in the Mandovi-Zuari estuarine system and thus provides very useful information to the stakeholder and concerned departments for initiating the mitigation measures.

Abundance and characteristics of microplastics in commercially important bottom dwelling finfishes and shellfish of the Vembanad Lake, India.

This paper characterize microplastics (MPs) in the heavily urbanized, brackish water Vembanad Lake (India), focussing on some commercially important bottom-feeding fishes and shellfish (Arius maculatus, Etroplus suratensis, E. maculatus and Villorita sp.). The average abundance of MPs was higher in the water column (872 ± 573 nos./m3) than in finfishes (15 ± 13 particles per fish) and shellfish (23 ± 20 nos./ind.). Fibre was the most abundant MP type in the water and the organisms examined. The size of MPs obtained from finfishes ranged between 0.04 and 4.73 mm (4 ± 3 mm), with a majority of particles being <4 mm. No correlation was found between biological features (e.g. gut length, mouth size) of fishes and the size of MPs in their gut. In Villorita sp., the abundance of MPs was positively correlated with the size of the individuals. Raman spectroscopy confirmed the presence of chlorinated polyvinyl chloride, polyethylene, polypropylene and polyester in the samples.

Assessment of micro and macroplastics along the west coast of India: Abundance, distribution, polymer type and toxicity.

Considering the magnitude of pollution caused by marine plastics, the present study assessed their abundance, distribution, surface morphology and polymer type in ten sandy beaches spread across three states (Maharashtra, Karnataka and Goa) along the west coast of India (WCI). The total abundance of plastics (∼1-100 mm) in the studied beaches ranged from 4.1 to 23.4% (19±1-346 ± 2 items/m2). Location-wise, the abundances of both micro (43.6 ± 1.1-346 ± 2 items/m2) and macroplastics (21.6±3-195 ± 6 items/m2) were relatively higher in beaches along the Maharashtra coast. Surface morphology-wise, fragments were predominantly abundant in both micro (76±2-346 ± 2 items/m2) and macroplastics (50.6 ± 1.5-195 ± 6 items/m2) followed by pellets (43.3 ± 2.5-245.6 ± 2 items/m2). Fourier-transform infrared spectroscopy (FT-IR) analysis of plastics revealed a dominance of polyethylene (PE) followed by polypropylene (PP). IR spectra of the collected plastics at absorption band at 1750-1700 cm-1 reflect minimal surface oxidation. White-colored plastics were observed most frequently, followed by pale-yellow, dark-brown, green, blue, transparent and red. A short-term (72 h) experimental study to assess the toxicity of PE microbeads (∼1 mm) in a commercially important shrimp species, Litopenaeus vannamei revealed toxicological changes. An elevated level of lipid peroxidation (LPX)-the tagged biochemical marker, was recorded only at the maximum dose (0.15 mg/L) of PE microbeads. A moderate increase in the levels of enzymatic antioxidants (catalase and glutathione S-transferase) was also recorded at the same dose. Comprehensive information on marine plastics, including ecotoxicity provided in this study, would help in evolving strategies in minimizing plastic pollution along the WCI.

Sources of sedimentary PAHs in tropical Asian waters: differentiation between pyrogenic and petrogenic sources by alkyl homolog abundance.

We collected surface sediment samples from 174 locations in India, Indonesia, Malaysia, Thailand, Vietnam, Cambodia, Laos, and the Philippines and analyzed them for polycyclic aromatic hydrocarbons (PAHs) and hopanes. PAHs were widely distributed in the sediments, with comparatively higher concentrations in urban areas (Sigma PAHs: approximately 1000 to approximately 100,000 ng/g-dry) than in rural areas ( approximately 10 to approximately 100g-dry), indicating large sources of PAHs in urban areas. To distinguish petrogenic and pyrogenic sources of PAHs, we calculated the ratios of alkyl PAHs to parent PAHs: methylphenanthrenes to phenanthrene (MP/P), methylpyrenes+methylfluoranthenes to pyrene+fluoranthene (MPy/Py), and methylchrysenes+methylbenz[a]anthracenes to chrysene+benz[a]anthracene (MC/C). Analysis of source materials (crude oil, automobile exhaust, and coal and wood combustion products) gave thresholds of MP/P=0.4, MPy/Py=0.5, and MC/C=1.0 for exclusive combustion origin. All the combustion product samples had the ratios of alkyl PAHs to parent PAHs below these threshold values. Contributions of petrogenic and pyrogenic sources to the sedimentary PAHs were uneven among the homologs: the phenanthrene series had a greater petrogenic contribution, whereas the chrysene series had a greater pyrogenic contribution. All the Indian sediments showed a strong pyrogenic signature with MP/P approximately 0.5, MPy/Py approximately 0.1, and MC/C approximately 0.2, together with depletion of hopanes indicating intensive inputs of combustion products of coal and/or wood, probably due to the heavy dependence on these fuels as sources of energy. In contrast, sedimentary PAHs from all other tropical Asian cities were abundant in alkylated PAHs with MP/P approximately 1-4, MPy/Py approximately 0.3-1, and MC/C approximately 0.2-1.0, suggesting a ubiquitous input of petrogenic PAHs. Petrogenic contributions to PAH homologs varied among the countries: largest in Malaysia whereas inferior in Laos. The higher abundance of alkylated PAHs together with constant hopane profiles suggests widespread inputs of automobile-derived petrogenic PAHs to Asian waters.

Assessing the source of oil deposited in the surface sediment of Mormugao Port, Goa - A case study of MV Qing incident.

In June 2016, a cruise vessel was grounded in the Mormugao Port, resulting in unnoticed oil spill. The surface water and sediment samples were collected from the vicinity of the ship, and also an oil sample from the ship (OIL). These samples were subject to petroleum biomarker such as pentacyclic triterpenes (hopanes) and compound specific carbon isotopic (δ13C) analyses to assess the source of hydrocarbon pollution in the Mormugao Port. While no clear trend was observed in water samples, the bottom surface sediments did show an identical pattern of hopanes with the oil. The chemometric analyses of hopane Diagnostic Ratios (DRs) and δ13C ratios confirmed the ship oil as the source of oil pollution in sediments. Whereas the water is comparatively more dynamic than the sediment, the physical processes arising out of winds, waves, tides and currents might have dispersed the oil away from the grounded ship.

Source analysis of radiocesium in river waters using road dust tracers.

Following the Fukushima Dai-ichi Nuclear Power Station accident, regional road dust, heavily contaminated with radiocesium, now represents a potential source of radiocesium pollution in river water. To promote effective countermeasures for reducing the risk from radiocesium pollution, it is important to understand its sources. This study evaluated the utility of metals, including Al, Fe, and Zn as road dust tracers, and applied them to analyze sources of 137Cs in rivers around Fukushima during wet weather. Concentrations of Zn in road dust were higher than agricultural and forest soils, whereas concentrations of Fe and Al were the opposite. Concentrations of Zn were weakly but significantly correlated with benzothiazole, a molecular marker of tires, indicating Zn represents an effective tracer of road dust. Al, Fe, and Zn were frequently detected in suspended solids in river water during wet weather. Distribution coefficients of these metals and 137Cs exceeded 104, suggesting sorptive behavior in water. Although concentrations of Al, Fe, Zn, and 137Cs were higher in fine fractions of road dust and soils than in coarse fractions, use of ratios of 137Cs to Al, Fe, or Zn showed smaller differences among size fractions. The results demonstrate that combinations of these metals and 137Cs are useful for analyzing sources of radiocesium in water. These ratios in river water during wet weather were found to be comparable with or lower than during dry weather and were closer to soils than road dust, suggesting a limited contribution from road dust to radiocesium pollution in river water.