Noninvasive CT-based hemodynamic assessment of coronary lesions derived from fast computational analysis: a comparison against fractional flow reserve.

OBJECTIVES: Application of computational fluid dynamics (CFD) to three-dimensional CTCA datasets has been shown to provide accurate assessment of the hemodynamic significance of a coronary lesion. We aim to test the feasibility of calculating a novel CTCA-based virtual functional assessment index (vFAI) of coronary stenoses > 30% and ≤ 90% by using an automated in-house-developed software and to evaluate its efficacy as compared to the invasively measured fractional flow reserve (FFR). METHODS AND RESULTS: In 63 patients with chest pain symptoms and intermediate (20-90%) pre-test likelihood of coronary artery disease undergoing CTCA and invasive coronary angiography with FFR measurement, vFAI calculations were performed after 3D reconstruction of the coronary vessels and flow simulations using the finite element method. A total of 74 vessels were analyzed. Mean CTCA processing time was 25(± 10) min. There was a strong correlation between vFAI and FFR, (R = 0.93, p < 0.001) and a very good agreement between the two parameters by the Bland-Altman method of analysis. The mean difference of measurements from the two methods was 0.03 (SD = 0.033), indicating a small systematic overestimation of the FFR by vFAI. Using a receiver-operating characteristic curve analysis, the optimal vFAI cutoff value for identifying an FFR threshold of ≤ 0.8 was ≤ 0.82 (95% CI 0.81 to 0.88). CONCLUSIONS: vFAI can be effectively derived from the application of computational fluid dynamics to three-dimensional CTCA datasets. In patients with coronary stenosis severity > 30% and ≤ 90%, vFAI performs well against FFR and may efficiently distinguish between hemodynamically significant from non-significant lesions. KEY POINTS: Virtual functional assessment index (vFAI) can be effectively derived from 3D CTCA datasets. In patients with coronary stenoses severity > 30% and ≤ 90%, vFAI performs well against FFR. vFAI may efficiently distinguish between functionally significant from non-significant lesions.

Three-dimensional reconstruction of coronary arteries and plaque morphology using CT angiography--comparison and registration with IVUS.

BACKGROUND: The aim of this study is to present a new methodology for three-dimensional (3D) reconstruction of coronary arteries and plaque morphology using Computed Tomography Angiography (CTA). METHODS: The methodology is summarized in six stages: 1) pre-processing of the initial raw images, 2) rough estimation of the lumen and outer vessel wall borders and approximation of the vessel's centerline, 3) manual adaptation of plaque parameters, 4) accurate extraction of the luminal centerline, 5) detection of the lumen - outer vessel wall borders and calcium plaque region, and 6) finally 3D surface construction. RESULTS: The methodology was compared to the estimations of a recently presented Intravascular Ultrasound (IVUS) plaque characterization method. The correlation coefficients for calcium volume, surface area, length and angle vessel were 0.79, 0.86, 0.95 and 0.88, respectively. Additionally, when comparing the inner and outer vessel wall volumes of the reconstructed arteries produced by IVUS and CTA the observed correlation was 0.87 and 0.83, respectively. CONCLUSIONS: The results indicated that the proposed methodology is fast and accurate and thus it is likely in the future to have applications in research and clinical arena.

Patient-specific computational modeling of subendothelial LDL accumulation in a stenosed right coronary artery: effect of hemodynamic and biological factors.

Atherosclerosis is a systemic disease with local manifestations. Low-density lipoprotein (LDL) accumulation in the subendothelial layer is one of the hallmarks of atherosclerosis onset and ignites plaque development and progression. Blood flow-induced endothelial shear stress (ESS) is causally related to the heterogenic distribution of atherosclerotic lesions and critically affects LDL deposition in the vessel wall. In this work we modeled blood flow and LDL transport in the coronary arterial wall and investigated the influence of several hemodynamic and biological factors that may regulate LDL accumulation. We used a three-dimensional model of a stenosed right coronary artery reconstructed from angiographic and intravascular ultrasound patient data. We also reconstructed a second model after restoring the patency of the stenosed lumen to its nondiseased state to assess the effect of the stenosis on LDL accumulation. Furthermore, we implemented a new model for LDL penetration across the endothelial membrane, assuming that endothelial permeability depends on the local lumen LDL concentration. The results showed that the presence of the stenosis had a dramatic effect on the local ESS distribution and LDL accumulation along the artery, and areas of increased LDL accumulation were observed in the downstream region where flow recirculation and low ESS were present. Of the studied factors influencing LDL accumulation, 1) hypertension, 2) increased endothelial permeability (a surrogate of endothelial dysfunction), and 3) increased serum LDL levels, especially when the new model of variable endothelial permeability was applied, had the largest effects, thereby supporting their role as major cardiovascular risk factors.

Graph-guided Gaussian Process-based Diagnosis of CVD Severity with Uncertainty Measures.

The severity of coronary artery disease can be assessed invasively using the Fractional Flow Reserve (FFR) index which is a useful diagnostic tool for the clinicians to select the treatment approach. The present work capitalizes a Gaussian process (GP) framework over graphs for the prediction of FFR index using only non-invasive imaging and clinical features. More specifically, taking the per-node one-hop connectivity vector as input, we employed a regression-based task by applying an ensemble of graph-adapted Gaussian process experts, with a data-adaptive fashion via online training. The main novelty of the work lies in the fact that for the first time in a medical field the inference model considers only the similarity condition of the patients, instead of their features. Our results demonstrate the impressive merits of the proposed medical EGP (MedEGP) method, in comparison to the single GP, and Linear Regression (LR) models to predict the FFR index, with well-calibrated uncertainty.Clinical Relevance- This paper establishes an accurate non-invasive approach to predict the FFR for the diagnosis of coronary artery disease.

Machine Learning Models Predict the Need of Amputation and/or Peripheral Artery Revascularization in Hypertensive Patients Within 7-Years Follow-Up.

Lower extremity amputation and requirement of peripheral artery revascularization are common outcomes of undiagnosed peripheral artery disease patients. In the current work, prediction models for the need of amputation or peripheral revascularization focused on hypertensive patients within seven years follow up are employed. We applied machine learning (ML) models using classifiers such as Extreme Gradient Boost (XGBoost), Random Forest (RF) and Adaptive Boost (AdaBoost), that will allow clinicians to identify the patients at risk of these two endpoints using simple clinical data. We used the non-interventional cohort of the getABI study in the primary care setting, selecting 4,191 hypertensive patients out of 6,474 patients with age over 65 years old and followed up for vascular events or death up to 7 years. During this follow up period, 150 patients underwent either amputation or peripheral revascularization or both. Accuracy, Specificity, Sensitivity and Area under the receiver operating characteristic curve (AUC) were estimated for each machine learning model. The results demonstrate Random Forest as the most accurate model for the prediction of the composite endpoint in hypertensive patients within 7 years follow-up, achieving 73.27 % accuracy.Clinical Relevance-This study assists clinicians to better predict and treat these serious outcomes, amputation and peripheral revascularization in hypertensive patients.

Cleverballoon: An integrated approach for developing a drug-coated balloon with everolimus.

Coronary artery disease (CAD) is a chronic disease associated with high mortality and morbidity. Although treatment with drug-eluting stents is the most frequent interventional approach for coronary artery disease, drug-coated balloons (DCBs) constitute an innovative alternative, especially in the presence of certain anatomical conditions in the local coronary vasculature. DCBs allow the fast and homogenous transfer of drugs into the arterial wall, during the balloon inflation. Their use has been established for treating in-stent restenosis caused by stent implantation, while recent clinical trials have shown a satisfactory efficacy in de novo small-vessel disease. Several factors affect DCBs performance including the catheter design, the drug dose and formulation. Cleverballoon focuses on the design and development of an innovative DCB with everolimus. For the realization of the development of this new DCB, an integrated approach, including in- vivo, in-vitro studies and in-silico modelling towards the DCB optimization, is presented.Clinical Relevance-The proposed study introduces the integration of in- vivo, in-vitro and in silico approaches in the design and development process of a new DCB, following the principles of 3R's for the replacement, reduction, and refinement of animal and clinical studies.

TAXINOMISIS: A cloud - based platform for risk profiling and patient specific management of the carotid artery disease.

Carotid Artery Disease is a complex multi-disciplinary medical condition causing strokes and several other disfunctions to individuals. Within this work, a cloud - based platform is proposed for clinicians and medical doctors that provides a comprehensive risk assessment tool for carotid artery disease. It includes three modeling levels: baseline data-driven risk assessment, blood flow simulations and plaque progression modeling. The proposed models, which have been validated through a wide set of studies within the TAXINOMISIS project, are delivered to the end users through an easy-to-use cloud platform. The architecture and the deployment of this platform includes interfaces for handling the electronic patient record, the 3D arterial reconstruction, blood flow simulations and risk assessment reporting. TAXINOMISIS, compared with both similar software approaches and with the current clinical workflow, assists clinicians to treat patients more effectively and more accurately by providing innovative and validated tools.Clinical Relevance - Asymptomatic carotid artery disease is a prevalent condition that affects a significant portion of the population, leading to an increased risk of stroke and other cardiovascular events. Early detection and appropriate treatment of this condition can significantly reduce the risk of adverse outcomes and improve patient outcomes. The development of a software tool to assist clinicians in the assessment and management of asymptomatic patients with carotid artery disease is therefore of great clinical relevance. By providing a comprehensive and reliable assessment of the disease and its risk factors, this tool will enable clinicians to make informed decisions regarding patient management and treatment. The impact of this tool on patient outcomes and the reduction of healthcare costs will be of great importance to both patients and the healthcare system.

An All-in-One Tool for 2D Atherosclerotic Disease Assessment and 3D Coronary Artery Reconstruction.

Diagnosis of coronary artery disease is mainly based on invasive imaging modalities such as X-ray angiography, intravascular ultrasound (IVUS) and optical coherence tomography (OCT). Computed tomography coronary angiography (CTCA) is also used as a non-invasive imaging alternative. In this work, we present a novel and unique tool for 3D coronary artery reconstruction and plaque characterization using the abovementioned imaging modalities or their combination. In particular, image processing and deep learning algorithms were employed and validated for the lumen and adventitia borders and plaque characterization at the IVUS and OCT frames. Strut detection is also achieved from the OCT images. Quantitative analysis of the X-ray angiography enables the 3D reconstruction of the lumen geometry and arterial centerline extraction. The fusion of the generated centerline with the results of the OCT or IVUS analysis enables hybrid coronary artery 3D reconstruction, including the plaques and the stent geometry. CTCA image processing using a 3D level set approach allows the reconstruction of the coronary arterial tree, the calcified and non-calcified plaques as well as the detection of the stent location. The modules of the tool were evaluated for efficiency with over 90% agreement of the 3D models with the manual annotations, while a usability assessment using external evaluators demonstrated high usability resulting in a mean System Usability Scale (SUS) score equal to 0.89, classifying the tool as "excellent".

Machine Learning Models for Cardiovascular Disease Events Prediction.

Cardiovascular diseases (CVDs) are among the most serious disorders leading to high mortality rates worldwide. CVDs can be diagnosed and prevented early by identifying risk biomarkers using statistical and machine learning (ML) models, In this work, we utilize clinical CVD risk factors and biochemical data using machine learning models such as Logistic Regression (LR), Support Vector Machine (SVM), Random Forest (RF), Naïve Bayes (NB), Extreme Grading Boosting (XGB) and Adaptive Boosting (AdaBoost) to predict death caused by CVD within ten years of follow-up. We used the cohort of the Ludwigshafen Risk and Cardiovascular Health (LURIC) study and 2943 patients were included in the analysis (484 annotated as dead due to CVD). We calculated the Accuracy (ACC), Precision, Recall, F1-Score, Specificity (SPE) and area under the receiver operating characteristic curve (AUC) of each model. The findings of the comparative analysis show that Logistic Regression has been proven to be the most reliable algorithm having accuracy 72.20 %. These results will be used in the TIMELY study to estimate the risk score and mortality of CVD in patients with 10-year risk.

Detection of Asymptomatic Carotid Artery Stenosis through Machine Learning.

Carotid artery disease, the pathological condition of carotid arteries, is considered as the most significant cause of cerebral events and stroke. Carotid artery disease is considered as an inflammatory process, which involves the deposition and accumulation of atherosclerotic plaque inside the carotid intima, resulting in the narrowing of the arteries. Carotid artery stenosis (CAS) is either symptomatic or asymptomatic and its presence and location is determined by different imaging modalities, such as the carotid duplex ultrasound, the computed tomography angiography, the magnetic resonance angiography (MRA) and the cerebral angiography. The aim of this study is to present a machine learning model for the diagnosis and identification of individuals of asymptomatic carotid artery stenosis, using as input typical health data. More specifically, the overall model is trained with typical demographics, clinical data, risk factors and medical treatment data and is able to classify the individuals into high risk (Class 1-CAS group) and low risk (Class 0-non CAS group) individuals. In the presented study, we implemented a statistical analysis to check the data quality and the distribution into the two classes. Different feature selection techniques, in combination with classification schemes were applied for the development of our machine learning model. The overall methodology has been trained and tested using 881 cases (443 subjects in low risk class and 438 in high risk class). The highest accuracy 0.82 and an area under curve 0.9 were achieved using the relief feature selection technique and the random forest classification scheme.

Segmentation of left atrium using CT images and a deep learning model.

The left atrium (LA) is one of the cardiac cavities with the most complex anatomical structures. Its role in the clinical diagnosis and patient's management is critical, as it is responsible for the atrial fibrillation, a condition that promotes the thrombogenesis inside the left atrial appendage. The development of an automated approach for LA segmentation is a demanding task mainly due to its anatomical complexity and the variation of its shape among patients. In this study, we focus to develop an unbiased pipeline capable to segment the atrial cavity from CT images. For evaluation purposes state-of-the-art metrics were used to assess the segmentation results. Particularly, the results indicated the mean values of the dice score 80%, the hausdorff distance 11.78mm, the average surface distance 2.24mm and the rand error index 0.2.

Investigation of crimping effects on the stent deployment through in silico modeling.

Atherosclerosis is one of the most mortal diseases that affects the arterial vessels, due to accumulation of plaque, altering the hemodynamic environment of the artery by preventing the sufficient delivery of blood to other organs. Stents are expandable tubular wires, used as a treatment option. In silico studies have been extensively exploited towards examining the performance of such devices by employing Finite Element Modeling. This study models the crimping stage during stent implantation to examine the effect of inclusion of pre-stress state of the stent. The results show that modeling of the crimping stress state of the stent prior to the deployment results in under-expansion of the stent, due to the indirect inclusion of strain-induced hardening effects. As a result, it is evident that the compressive stent stress configuration is important to be considered in the computational modeling approaches of stent deployment.

A proof-of-concept study for the simulation of blood flow in a post arterial segment for different blood rheology models.

Cardiovascular disease (CVD) and especially atherosclerosis are chronic inflammatory diseases which cause the atherosclerotic plaque growth in the arterial vessels and the blood flow reduction. Stents have revolutionized the treatment of this disease to a great extent by restoring the blood flow in the vessel. The present study investigates the performance of the blood flow after stent implantation in patient-specific coronary artery and demonstrates the effect of using Newtonian vs. non-Newtonian blood fluid models in the distribution of endothelial shear stress. In particular, the Navier-Stokes and continuity equations were employed, and three non-Newtonian fluid models were investigated (Carreau, Carreau-Yasuda and the Casson model). Computational finite elements models were used for the simulation of blood flow. The comparison of the results demonstrates that the Newtonian fluid model underestimates the calculation of Endothelial Shear Stress, while the three non-Newtonian fluids present similar distribution of shear stress. Keywords: Blood flow dynamics, stented artery, non-Newtonian fluid. Clinical Relevance- This work demonstrates that when blood flow modeling is performed at stented arteries and predictive models are developed, the non-Newtonian nature of blood must be considered.

Investigation of Drug Eluting Stents performance in human atherosclerotic artery through in silico modeling.

Atherosclerosis is a chronic inflammatory disease associated with heart attack and stroke. It causes the growth of atherosclerotic plaques inside the arterial vessels, which in turn results to the reduction of the blood flow to the different organs. Drug-Eluting Stents (DES) are mesh-like wires, carrying pharmaceutical coating, designed to dilate and support the arterial vessel, restore blood flow and through the controlled local drug delivery inhibit neo-intimal thickening. In silico modeling is an efficient method of accurately predicting and assessing the performance of the stenting procedure. The present in silico study investigates the performance of two different stents (Bare Metal Stent, Drug-Eluting Stent) in a patient-specific coronary artery and assesses the effect of stent coating, considering that the same procedural approach is followed by the interventional cardiologist. The results demonstrate that even if small differences are obtained in the two models, the incorporation of the stent coatings (in DES) does not significantly affect the outcomes of the stent deployment, the stresses and strains in the scaffold and the arterial tissue. Nevertheless, it is suggested that regarding the DES expansion, higher pressure should be applied at the inner surface of the stent.

A Machine Learning Model for the Identification of High risk Carotid Atherosclerotic Plaques.

Carotid artery disease is an inflammatory condition involving the deposition and accumulation of lipid species and leucocytes from blood into the arterial wall, which causes the narrowing of the carotid arteries on either side of the neck. Different imaging modalities can by implemented to determine the presence and the location of carotid artery stenosis, such as carotid ultrasound, computed tomography angiography (CTA), magnetic resonance angiography (MRA), or cerebral angiography. However, except of the presence and the degree of stenosis of the carotid arteries, the vulnerability of the carotid atherosclerotic plaques constitutes a significant factor for the progression of the disease and the presence of disease symptoms. In this study, our aim is to develop and present a machine learning model for the identification of high risk plaques using non imaging based features and non-invasive imaging based features. Firstly, we implemented statistical analysis to identify the most statistical significant features according to the defined output, and subsequently, we implemented different feature selection techniques and classification schemes for the development of our machine learning model. The overall methodology has been trained and tested using 208 cases of 107 cases of low risk plaques and 101 cases of high risk plaques. The highest accuracy of 0.76 was achieved using the relief feature selection technique and the support vector machine classification scheme. The innovative aspect of the proposed machine learning model is both the different categories of the utilized input features and the definition of the problem to be solved.

A proof-of-concept study for the prediction of the de-novo atherosclerotic plaque development using finite elements.

The type of the atherosclerotic plaque has significant clinical meaning since plaque vulnerability depends on its type. In this work, we present a computational approach which predicts the development of new plaques in coronary arteries. More specifically, we employ a multi-level model which simulates the blood fluid dynamics, the lipoprotein transport and their accumulation in the arterial wall and the triggering of inflammation using convection-diffusion-reaction equations and in the final level, we estimate the plaque volume which causes the arterial wall thickening. The novelty of this work relies on the conceptual approach that using the information from 94 patients with computed tomography coronary angiography (CTCA) imaging at two time points we identify the correlation of the computational results with the real plaque components detected in CTCA. In the next step, we use these correlations to generate two types of de-novo plaques: calcified and non-calcified. Evaluation of the model's performance is achieved using eleven patients, who present de-novo plaques at the follow-up imaging. The results demonstrate that the computationally generated plaques are associated significantly with the real plaques indicating that the proposed approach could be used for the prediction of specific plaque type formation.

Error Propagation in the Simulation of Atherosclerotic Plaque Growth and the Prediction of Atherosclerotic Disease Progression.

Assessments of coronary artery disease can be achieved using non-invasive computed tomography coronary angiography (CTCA). CTCA can be further used for the 3D reconstruction of the coronary arteries and the development of computational models. However, image acquisition and arterial reconstruction introduce an error which can be propagated, affecting the computational results and the accuracy of diagnostic and prognostic models. In this work, we investigate the effect of an imaging error, propagated to a diagnostic index calculated using computational modelling of blood flow and then to prognostic models based on plaque growth modelling or binary logistic predictive modelling. The analysis was performed utilizing data from 20 patients collected at two time points with interscan period of six years. The collected data includes clinical and risk factors, biological and biohumoral data, and CTCA imaging. The results demonstrated that the error propagated and may have significantly affected some of the final outcomes. The calculated propagated error seemed to be minor for shear stress, but was major for some variables of the plaque growth model. In parallel, in the current analysis SmartFFR was not considerably affected, with the limitation of only one case located into the gray zone.

Computational modeling of atherosclerotic plaque progression in carotid lesions with moderate degree of stenosis.

Carotid atherosclerotic plaque growth leads to the progressive luminal stenosis of the vessel, which may erode or rupture causing thromboembolism and cerebral infarction, manifested as stroke. Carotid atherosclerosis is considered the major cause of ischemic stroke in Europe and thus new imaging-based computational tools that can improve risk stratification and management of carotid artery disease patients are needed. In this work, we present a new computational approach for modeling atherosclerotic plaque progression in real patient-carotid lesions, with moderate to severe degree of stenosis (>50%). The model incorporates for the first time, the baseline 3D geometry of the plaque tissue components (e.g. Lipid Core) identified by MR imaging, in which the major biological processes of atherosclerosis are simulated in time. The simulated plaque tissue production results in the inward remodeling of the vessel wall promoting luminal stenosis which in turn predicts the region of the actual stenosis progression observed at the follow-up visit. The model aims to support clinical decision making, by identifying regions prone to plaque formation, predict carotid stenosis and plaque burden progression, and provide advice on the optimal time for patient follow-up screening.

SmartFFR, a New Functional Index of Coronary Stenosis: Comparison With Invasive FFR Data.

Aims: In this study, we evaluate the efficacy of SmartFFR, a new functional index of coronary stenosis severity compared with gold standard invasive measurement of fractional flow reserve (FFR). We also assess the influence of the type of simulation employed on smartFFR (i.e. Fluid Structure Interaction vs. rigid wall assumption). Methods and Results: In a dataset of 167 patients undergoing either computed tomography coronary angiography (CTCA) and invasive coronary angiography or only invasive coronary angiography (ICA), as well as invasive FFR measurement, SmartFFR was computed after the 3D reconstruction of the vessels of interest and the subsequent blood flow simulations. 202 vessels were analyzed with a mean total computational time of seven minutes. SmartFFR was used to process all models reconstructed by either method. The mean FFR value of the examined dataset was 0.846 ± 0.089 with 95% CI for the mean of 0.833-0.858, whereas the mean SmartFFR value was 0.853 ± 0.095 with 95% CI for the mean of 0.84-0.866. SmartFFR was significantly correlated with invasive FFR values (RCCTA = 0.86, p CCTA < 0.0001, RICA = 0.84, p ICA < 0.0001, R overall = 0.833, p overall < 0.0001), showing good agreement as depicted by the Bland-Altman method of analysis. The optimal SmartFFR threshold to diagnose ischemia was ≤0.83 for the overall dataset, ≤0.83 for the CTCA-derived dataset and ≤0.81 for the ICA-derived dataset, as defined by a ROC analysis (AUCoverall = 0.956, p < 0.001, AUCICA = 0.975, p < 0.001, AUCCCTA = 0.952, p < 0.001). Conclusion: SmartFFR is a fast and accurate on-site index of hemodynamic significance of coronary stenosis both at single coronary segment and at two or more branches level simultaneously, which can be applied to all CTCA or ICA sequences of acceptable quality.

The effect of the stenosis location at a coronary arterial bifurcation: a parametric study.

The advances in cardiovascular modelling over the past two decades have given the opportunity to create accurate three dimensional models of the coronary vasculature which, combined with advanced computational fluid dynamics algorithms can shed light to intriguing matters that concern clinicians. One of these issues is the presence of a stenosis near bifurcations in one of the major coronary vessels. In this work, we try to shed light on the aforementioned matter by creating a healthy arterial bifurcation reconstructed using the fusion of Optical Coherence Tomography and X-Ray angiography images. The healthy model was edited by adding an artificial stenosis of 50% diameter reduction into three different locations after the bifurcation, thus creating three diseased models. After performing the appropriate blood flow simulations, we observed that the location of the stenosis affects the Wall Shear Stress (WSS) distribution but it does not affect the functional significance of the stenosis itself.