Semiconducting Carbon Nanotube Extraction Enabled by Alkylated Cellulose Wrapping.

With the growing demand for postsilicon electronics, the purification of single-walled carbon nanotubes (SWCNTs) in terms of their chirality, which defines their atomic and electronic structure, is becoming increasingly important. Herein, we demonstrate the selective extraction of high-quality semiconducting SWCNTs using alkyl cellulose as a dispersant in organic solvents. We investigated the separation factors of dispersant structures, such as the degree of substitution (DS) and molecular weight, and clarified the appropriate dispersant structures, such as moderately substituted hexyl cellulose, for selective semiconducting SWCNT extraction. Due to the improved purity and quality of the semiconducting SWCNTs obtained by this method, their films exhibit excellent thermoelectric power factors, outperforming not only unsorted SWCNTs but also conducting polymer-sorted SWCNTs. This sorting technology paves the way for supplying high-quality semiconducting SWCNTs in a viable manner.

Evaluation of DNA-mediated electron transfer using a hole-trapping nucleobase under crowded conditions.

The effects of a crowded environment on DNA-mediated electron transfer were evaluated using a pyrene-modified oligonucleotide containing a hole-trapping nucleobase in poly(ethylene glycol) mixed solutions. Rapid decompositions of hole-trapping bases in condensed and noncondensed DNA showed that more efficient electron transfer occurred under crowded conditions than in dilute solutions.

Distribution of serum adiponectin isoforms in pediatric patients with steroid-sensitive nephrotic syndrome.

BACKGROUND: Serum adiponectin circulates in three multimeric isoforms: high-molecular-weight (HMW), middle-molecular-weight (MMW), and low-molecular-weight (LMW) isoforms. Potential change in the circulating adiponectin levels in patients with nephrotic syndrome (NS) remain unknown. This study aimed to assess the levels of total adiponectin and the distribution of its isoforms in pediatric patients with NS. METHODS: We sequentially measured total adiponectin and each adiponectin isoform levels at the onset of NS, initial remission, and during the remission period of the disease in 31 NS patients. We also calculated the ratios of HMW (%HMW), MMW (%MMW), and LMW (%LMW) to total adiponectin incuding 51 control subjects. RESULTS: The median of total serum adiponectin levels in patients were 36.7, 36.7, and 20.2 µg/mL at the onset, at initial remission, and during the remission period of NS, respectively. These values were significantly higher than those in control subjects. The median values of %HMW, %MMW, and %LMW values were 56.9/27.0/14.1 at the onset, 62.0/21.8/13.4 at the initial remission, and 58.1/21.7/17.5 at during the remission period of NS, respectively. Compared with control subjects, %HMW at initial remission and %MMW at the onset were high, and the %LMW values at the onset and at initial remission were low. CONCLUSIONS: In patients with NS, total serum adiponectin levels increase at the onset of the disease, and the ratio of adiponectin isoforms changes during the course of the disease. Further studies are needed to delineate the mechanisms between proteinuria and adiponectin isoforms change.

Guanine damage by singlet oxygen from SYBR Green I in liquid crystalline DNA.

It is known that double-stranded DNA (dsDNA) turns into a liquid crystalline phase by the addition of a high concentration of polymer with salt. SYBR Green I (SG) is a well-known sensitive fluorescent stain for dsDNA, and is intercalated in liquid crystalline DNA. Formation of the liquid crystalline dsDNA-SG complex has been confirmed by CD spectral measurements, fluorescence spectral measurements and confocal fluorescence microscopy. SG in dsDNA was also used as a singlet oxygen generator. We conducted photoirradiation experiments using three kinds of 42-mer oligonucleotides with SG. The amount of guanine decomposition by selective irradiation of SG was analyzed using HPLC after digestion of dsDNA in each sample solution. We found that singlet oxygen produced in liquid crystalline DNA promoted guanine damage much more efficiently than in homogeneous solution.

The effect of spermidine on guanine decomposition via photoinduced electron transfer in DNA.

Spermidine, a trivalent organic cation, induced DNA structural changes and suppressed guanine photooxidative decomposition via electron transfer through pyrene-modified DNA. On the other hand, adding higher concentrations of spermidine resulted in DNA condensation. The efficiency of guanine decomposition in condensed pyrene-modified DNA was promoted remarkably.

A New, General Strategy for Fabricating Highly Concentrated and Viscoplastic Suspensions Based on a Structural Approach To Modulate Interparticle Interaction.

We report a general strategy to fabricate highly concentrated, viscoplastic and stable suspensions by designing the particle surface structure to control the interparticle attractive forces. Unlike conventional methods, where the choice of solvent is critical in balancing interparticle interactions, suspensions showing excellent stability and viscoplastic properties were made using various solvents. We demonstrated this approach using highly sparse agglomerates of carbon nanotubes (CNTs) as the particles. Our results revealed that the essential feature of the CNT agglomerate to fabricate these suspensions was high porosity with a spacing size much smaller than the overall size, which was only possible using long single-walled carbon nanotubes (SWNTs). In this way, the agglomerate surface was characterized by fine network of CNT bundles. These suspensions exhibited solid-like behavior at rest (characterized by a high yield stress of c.a. 100 Pa) and a liquid-like behavior when subjected to a stress (characterized by a significant drop of an apparent viscosity to 1 Pa·s at a shear rate of 1000 s-1). Furthermore, in contrast to conventionally fabricated suspensions, these "CNT pastes" exhibited exceptional stability at rest, under flow, and at extremely high concentrations during the drying process, with only a weakly observable dependence on solvent type. As a result, highly uniform micrometer-thick SWNT films were successfully fabricated by dried blade-coated films of these pastes. Finally, we developed a simple, semiempirical model and clarified the importance of the CNT agglomerate microstructure (the ratio of spacing size/particle size and porosity) on tailoring the cohesive forces between particles to fabricate stable viscoplastic suspensions.

Predictors of relapse and long-term outcome in children with steroid-dependent nephrotic syndrome after rituximab treatment.

BACKGROUND: In patients with complicated steroid-dependent nephrotic syndrome (SDNS), rituximab (RTX) followed by immunosuppressive agent (IS) can maintain remission without the use of prednisolone (PSL). However, available data on the predictive factors for relapse and the long-term outcome after this protocol are few. METHODS: We retrospectively analyzed 43 SDNS patients who were followed-up for a long time (>2 years, mean 5.4 years) after a single dose of RTX (375 mg/m2) from September 2007. After RTX, PSL was tapered off within 6 months; monotherapy with IS, such as cyclosporine or mycophenolate mofetil, was continued to prevent post-RTX relapse. For patients who achieved >12 months of PSL-free remission, IS was also tapered off. RESULTS: Thirty-nine patients (91 %) could discontinue PSL without relapses at a median of 154 days after the initial RTX. The first relapse of NS occurred in 39 patients (91 %) at a median of 586 days; additional RTX doses were administered in 28 patients (65 %). Kaplan-Meier analysis showed that shorter CD19 cell depletion (<150 days) and younger age at RTX initiation (<12.5 years) were significantly associated with high risk for first relapse after RTX (log rank p < 0.05). In multivariate analysis, mycophenolate mofetil therapy as maintenance IS after RTX was the only predicted risk factor for first relapse (hazard ratio 2.75; p = 0.027). At the last follow-up, IS was still used in 33 patients (77 %); treatment-free remission (>12 months) was achieved in only five patients (12 %). CONCLUSIONS: The introduction of RTX may not be necessarily associated with improved long-term outcome.

Efficacy of non-carbapenem antibiotics for pediatric patients with first febrile urinary tract infection due to extended-spectrum beta-lactamase-producing Escherichia coli.

Although carbapenem is the recommended for urinary tract infection (UTI) caused by extended-spectrum beta-lactamase (ESBL)-producing organisms, non-carbapenems have been reported to be effective for adult patients with UTI caused by ESBL-producing organisms. The purpose of this study was to evaluate the efficacy of non-carbapenems for pediatric patients with UTI due to ESBL-producing Escherichia coli (E. coli) based on the microbiologic and clinical outcomes. Fifteen children, who were treated for first febrile UTI caused by ESBL-producing E. coli were enrolled in this study. Antimicrobial susceptibilities and ESBL production were determined according to the Clinical and Laboratory Standards Institute guidelines. To detect CTX-M genes, polymerase chain reaction was performed with specific primers for blaCTX-M detection. Of the 15 enrolled patients, 10 (66.7%) were boys and 5 (33.3%) were girls, with a median age of four months. VUR was detected in six patients (40%). For detection of blaCTX-M by PCR, CTX-M-3, CTX-M-8, CTX-M-14, and CTX-M-15 were detected in five, one, eight, and one patient, respectively. Overall, 14 of the 15 isolates (93.3%) were susceptible for fosfomycin (FOM), and all isolates were susceptible for cefmetazole (CMZ), flomoxef (FMOX), and imipenem/cilastatin (IPM/CS). Of the 15 patients, 12 (80%) clinically improved without the use of carbapenems. In conclusion, even if isolates of ESBL-producing E. coli are multidrug resistant based on MIC assessment, clinical susceptibility to non-carbapenems, such as CMZ, FMOX, and FOM, is possible. Accordingly, carbapenems may not be required all the time for treatment of pediatric UTI in clinical practice.

Unexpected Efficient Synthesis of Millimeter-Scale Single-Wall Carbon Nanotube Forests Using a Sputtered MgO Catalyst Underlayer Enabled by a Simple Treatment Process.

An unexpected 5000% increase in growth efficiency and high (95%) single-wall selectivity synthesis of vertically aligned carbon nanotubes (CNTs) was shown from Fe catalysts supported on a sputtered MgO underlayer from a simple underlayer treatment, i.e., annealing treatment. In this way, millimeter-scale single-wall carbon nanotube "forests" could be synthesized in a 10 min time, which has never been previously reported for MgO catalyst underlayer or any underlayer besides Al2O3. This level of efficiency and characterized SWCNT properties were similar to those grown using Al2O3 underlayers. Spectroscopic and microscopic analyses revealed that the treatment improved stability of the catalyst nanoparticle array by the suppressing catalyst subsurface diffusion and retaining the metallic state of the surface Fe atoms. Taken together, these results reveal a new route in achieving highly efficient SWCNT synthesis.

Robust and Soft Elastomeric Electronics Tolerant to Our Daily Lives.

Clothes represent a unique textile, as they simultaneously provide robustness against our daily activities and comfort (i.e., softness). For electronic devices to be fully integrated into clothes, the devices themselves must be as robust and soft as the clothes themselves. However, to date, no electronic device has ever possessed these properties, because all contain components fabricated from brittle materials, such as metals. Here, we demonstrate robust and soft elastomeric devices where every component possesses elastomeric characteristics with two types of single-walled carbon nanotubes added to provide the necessary electronic properties. Our elastomeric field effect transistors could tolerate every punishment our clothes experience, such as being stretched (elasticity: ∼ 110%), bent, compressed (>4.0 MPa, by a car and heels), impacted (>6.26 kg m/s, by a hammer), and laundered. Our electronic device provides a novel design principle for electronics and wide range applications even in research fields where devices cannot be used.

Diameter and density control of single-walled carbon nanotube forests by modulating Ostwald ripening through decoupling the catalyst formation and growth processes.

A continuous and wide range control of the diameter (1.9-3.2 nm) and density (0.03-0.11 g cm(-3) ) of single-walled carbon nanotube (SWNT) forests is demonstrated by decoupling the catalyst formation and SWNT growth processes. Specifically, by managing the catalyst formation temperature and H2 exposure, the redistribution of the Fe catalyst thin film into nanoparticles is controlled while a fixed growth condition preserved the growth yield. The diameter and density are inversely correlated, where low/high density forests would consist of large/small diameter SWNTs, which is proposed as a general rule for the structural control of SWNT forests. The catalyst formation process is modeled by considering the competing processes, Ostwald ripening, and subsurface diffusion, where the dominant mechanism is found to be Ostwald ripening. Specifically, H2 exposure increases catalyst surface energy and decreases diameter, while increased temperature leads to increased diffusion on the surface and an increase in diameter.

Role of subsurface diffusion and Ostwald ripening in catalyst formation for single-walled carbon nanotube forest growth.

Here we show that essentially any Fe compounds spanning Fe salts, nanoparticles, and buckyferrocene could serve as catalysts for single-walled carbon nanotube (SWNT) forest growth when supported on AlO(x) and annealed in hydrogen. This observation was explained by subsurface diffusion of Fe atoms into the AlO(x) support induced by hydrogen annealing where most of the deposited Fe left the surface and the remaining Fe atoms reconfigured into small nanoparticles suitable for SWNT growth. Interestingly, the average diameters of the SWNTs grown from all iron compounds studied were nearly identical (2.8-3.1 nm). We interpret that the offsetting effects of Ostwald ripening and subsurface diffusion resulted in the ability to grow SWNT forests with similar average diameters regardless of the initial Fe catalyst.

A molecular network underlying spontaneous cAMP oscillation and synchronization in Dictyostelium.

We propose a molecular network, incorporating both adaptation and phosphorylation, to account for the spontaneous cAMP oscillation of Dictyostelium discoideum. We have modified the scheme previously proposed by Loomis and his collaborators so as to include adaptation by the cAMP receptor and such that extracellular cAMP is formed by the secreted intracellular cAMP instead of being directly produced by adenylyl cyclase. Furthermore, our scheme provides better robustness, and can be applied to spontaneous cAMP production by a cluster of cells.

Mizoribine requires individual dosing due to variation of bioavailability.

BACKGROUND: Mizoribine (MZR) is an immunosuppressant used for the treatment of glomerular diseases, but there are few reports on the pharmacokinetics of MZR in children. METHODS: First, we performed a pharmacokinetic study on nine childhood-onset glomerular disease patients. The MZR dosages ranged from 1.8 to 14.5 mg/kg/dose. Pharmacokinetic parameters were analyzed using 38 MZR concentration-time curves. Second, nine patients who were newly treated with MZR were enrolled to validate the findings obtained from prior investigation. RESULTS: In the prior study, peak serum MZR concentration (C(max) ) was dose-dependent in each patient. Although proportionality between dosage and C(max) was observed in each patient, the regression coefficient was in a wide range from 0.075 to 1.04 and was specific to each patient. This variability was likely caused by individual variation of bioavailability. When the optimal time-point to monitor C(max) was investigated, the time-to-reach peak serum MZR concentration (T(max)) was similar among all the patients, which was from 2.5 to 3.5 h after administration of MZR. T(max) was most frequently observed at 3 h and the serum MZR concentration ratio relative to C(max) at 3 h was also highest (0.93 ± 0.07). In the following study, it was validated that monitoring C(3) is reproducible and reliable after adjusting the dosage of MZR to obtain target serum concentration. CONCLUSION: Individual dosing is required to optimize C(max) in childhood-onset glomerular disease patients. The safe dosage of MZR for each patient could be predicted by evaluating the serum MZR concentration 3 h after administration.

A Hydrogen-Free Approach for Activating an Fe Catalyst Using Trace Amounts of Noble Metals and Confinement into Nanoparticles.

Metallic iron (Fe) represents an exceptionally active catalyst, as shown in its use in the Haber-Bosch process to dissociate nitrogen molecules; however, the ease of corrosion by oxidation limits its usage. Hence, in most applications using metallic Fe catalysts, hydrogen is a necessary reactant. We report a novel hydrogen-free approach to fabricating reduced, highly active, and corrosion-resistive Fe-based catalysts using trace levels of noble metals (NMs) such as Ir, Rh, and Pt confined in the nanoparticle (NP). X-ray photoelectron spectroscopy (XPS) revealed that as little as ∼0.3 atom % was sufficient to induce the reduction of Fe. Extensive XPS analysis showed that the reduced NM atoms segregated to the NP surface and reduced the surrounding Fe atoms. We demonstrated the catalytic activity of the nanoparticles by the efficient synthesis of submillimeter tall, vertically aligned, and mainly double-walled carbon nanotube arrays using a completely hydrogen-free chemical vapor deposition process.

[Four infants with upper urinary tract infection due to extended-spectrum bata lactamase (ESBL)-producing Escherichia coli].

Bacteria producing extended-spectrum beta lactamase (ESBL) are detected mainly in adult urinary specimens, and are believed to cause hospital-acquired infection due to their resistance to many drugs. The incidence of community-acquired infection due to such bacteria is increasing, but few cases of infant upper urinary tract infection (UUTI) have been reported in Japan. We treated four infants with UUTI caused by ESBL-producing Escherichia coli, as determined by genotyping. Using medical records, we retrospectively evaluated the clinical course, antibiotic use and efficacy, antimicrobial susceptibility results, and the presence of underlying disease. One of the four had been previously hospitalized for occult bacteremia. Two developed UUTI after antibiotic treatment, indicating that previous antibiotic use may have been a risk factor in these cases. We could not identify the infection route in all cases. Two of the four had bilateral vesicoureteral reflux (VUR). Renal scintigraphy was done in three. Although an initial dimercaptosuccinic acid (DMSA) defect was detected in all four, only one had renal scarring. E. coli isolates from all four showed PCR signals for blaCTX-M-; one isolate positive for the blaCTX-M3 group and three positive for blaCTX-M14. Antimicrobial susceptibility test results showed all isolates to be resistant to cephalosporins, but discrepancies existed between antimicrobial susceptibility results and actual clinical efficacy. Clinically, cefazolin (CEZ) was effective in two subjects and ceftazidime (CAZ) effective in one. Panipenem/betamipron (PAPM/BP) was effective in one. None of the four developed sepsis or meningitis. Post hospitalization antibiotic prophylaxis showed that none of the four has had UUTI recur. Japan's ESBL-producing bacterial infection incidence is increasing, so medical professionals should watch for such UUTI even in first-case occurrence in infants.

MPC Polymer Promotes Recovery from Dry Eye via Stabilization of the Ocular Surface.

The polymer that includes 2-methacryloyloxy ethyl phosphorylcholine (MPC) is well-known as an effectively hydrating multifunction agent. In this study, we prepared an MPC polymer (MPCP) using radical polymerization with co-monomers-MPC/Stearyl Methacrylate/N,N-dimethylacrylamide-and evaluated the MPCP's usefulness for dry eye treatment using a rabbit model treated with N-acetylcysteine. The MPCP particle size was 50-250 nm, and the form was similar to that of micelles. The MPCP viscosity (approximately 0.95 mPa·s) was 1.17-fold that of purified water, and a decrease in the transepithelial electrical resistance value (corneal damage) was not observed in the immortalized human corneal epithelial cell line HCE-T cell (HCE-T cell layer). The MPCP enhanced the water maintenance on the cornea, and the instillation of MPCP increased the lacrimal fluid volume and prolonged the tear film breakup time without an increase in total mucin contents in the lacrimal fluid of the normal rabbits. The therapeutic potential of the MPCP for dry eye was evaluated using an N-acetylcysteine-treated rabbit model, and, in our investigation, we found that MPCP enhanced the volume of lacrimal fluid and promoted an improvement in the tear film breakup levels. These findings regarding the creation and characteristics of a novel MPCP will provide relevant information for designing further studies to develop a treatment for dry eyes.

Quantitative Evidence for the Dependence of Highly Crystalline Single Wall Carbon Nanotube Synthesis on the Growth Method.

We present a study quantitatively demonstrating that the method of synthesis (gas phase, fixed bed, non-fixed bed) represents a determining factor in the level of crystallinity in growing single wall carbon nanotubes (SWCNTs). Using far infrared spectroscopy, the "effective length" (associated with the level of crystallinity) was estimated for CNTs grown using various synthetic methods (lab-produced and supplemented by commercially purchased SWCNTs) as a metric for crystallinity (i.e., defect density). Analysis of the observed "effective lengths" showed that the SWCNTs fell into two general groups: long and short (high and low crystallinity) synthesized by gas-phase methods and all other supported catalyst methods, respectively. Importantly, the "long" group exhibited effective lengths in the range of 700-2200 nm, which was greater than double that of the typical values representing the "short" group (110-490 nm). These results highlight the significant difference in crystallinity. We interpret that the difference in the crystallinity stemmed from stress concentration at the nanotube-catalyst interface during the growth process, which originated from various sources of mismatch in growth rates (e.g., vertically aligned array) as well as impact stress from contact with other substrates during fluidization or rotation. These results are consistent with well-accepted belief, but now are demonstrated quantitatively.