RESUMO
OBJECTIVES: The glow discharge plasma (GDP) procedure has proven efficacy in grafting allylamine onto zirconia dental implant surfaces to enhance osseointegration. This study explored the enhancement of zirconia dental implant properties using GDP at different energy settings (25, 50, 75, 100, and 200 W) both in vitro and in vivo. MATERIALS AND METHODS: In vitro analyses included scanning electron microscopy, wettability assessment, energy-dispersive X-ray spectroscopy, and more. In vivo experiments involved implanting zirconia dental implants into rabbit femurs and later evaluation through impact stability test, micro-CT, and histomorphometric measurements. RESULTS: The results demonstrated that 25 and 50 W GDP allylamine grafting positively impacted MG-63 cell proliferation and increased alkaline phosphatase activity. Gene expression analysis revealed upregulation of OCN, OPG, and COL-I. Both 25 and 50 W GDP allylamine grafting significantly improved zirconia's surface properties (p < .05, p < .01, p < .001). However, only 25 W allylamine grafting with optimal energy settings promoted in vivo osseointegration and new bone formation while preventing bone level loss around the dental implant (p < .05, p < .01, p < .001). CONCLUSIONS: This study presents a promising method for enhancing Zr dental implant surface's bioactivity.
RESUMO
Titanium is widely used in medical implants despite the release of heavy metal ions over long-term use. Zirconia is very close to the color of teeth; however, its biological inertness hinders bonding with bone tissue. Alkaline treatment and coatings of calcium phosphate can be used to enhance bone regeneration adjacent to dental implants. This study examined the effects of alkaline treatment, calcium phosphate coatings, and sintering, on the physical properties of implant material. Our analysis confirmed that the calcium phosphate species were octacalcium phosphate (OCP). The sintering of calcium phosphate was shown to create B-type HAP, which is highly conducive toward the differentiation of mesenchymal stem cells (MSCs) into osteoblasts for the facilitation of bone integration. Conclusions: This study demonstrated the room-temperature fabrication of dental implants with superhydrophilic surfaces to enhance biocompatibility.
Assuntos
Materiais Revestidos Biocompatíveis , Implantes Dentários , Fosfatos de Cálcio , Materiais Revestidos Biocompatíveis/farmacologia , Osseointegração , Fosfatos , Propriedades de Superfície , Titânio/farmacologia , ZircônioRESUMO
In vitro, in vivo, and clinical studies have shown how the physicochemical and biological properties of ß-tricalcium phosphate (ß-TCP) work in bone regeneration. This study aimed to improve the properties of ß-TCP by achieving optimum surface and bulk ß-TCP chemical/physical properties through the hydrothermal addition of magnesium (Mg) and to later establish the biocompatibility of ß-TCP/Mg for bone grafting and tissue engineering treatments. Multiple in vitro and in vivo analyses were used to complete ß-TCP/Mg physicochemical and biological characterization. The addition of MgO brought about a modest rise in the number of ß-TCP surface particles, indicating improvements in alkaline phosphatase (ALP) activity on day 21 (p < 0.05) and in the WST-1assay on all days (p < 0.05), with a corresponding increase in the upregulation of ALP and bone sialoprotein. SEM analyses stated that the surfaces of the ß-TCP particles were not altered after the addition of Mg. Micro-CT and histomorphometric analysis from rabbit calvaria critical defects resulted in ß-TCP/Mg managing to reform more new bone than the control defects and ß-TCP control at 2, 6, and 8 weeks (* p ≤ 0.05, ** p ≤ 0.01, *** p ≤ 0.001, and **** p ≤ 0.0001). The hydrothermal addition of MgO to the ß-TCP surfaces ameliorated its biocompatibility without altering its surface roughness resulting from the elemental composition while enhancing cell viability and proliferation, inducing more bone regeneration by osteoconduction in vivo and osteoblastic differentiation in vitro.
Assuntos
Regeneração Óssea , Fosfatos de Cálcio/farmacologia , Diferenciação Celular , Magnésio/farmacologia , Osteogênese , Alicerces Teciduais , Animais , Linhagem Celular , Humanos , Masculino , CoelhosRESUMO
Background/purpose: 3D-printed bone tissue engineering is becoming recognized as a key approach in dentistry for creating customized bone regeneration treatments fitting patients bone defects requirements. 3D bioprinting offers an innovative method to fabricate detailed 3D structures, closely emulating the native bone micro-environment and better bone regeneration. This study aimed to develop an 3D-bioprintable scaffold using a combination of alginate and ß-tricalcium phosphate (ß-TCP) with the Cellink® BioX printer, aiming to advance the field of tissue engineering. Materials and methods: The physical and biological properties of the resulting 3D-printed scaffolds were evaluated at 10 %, 12 %, and 15 % alginate combined with 10 % ß-TCP. The scaffolds were characterized through printability, swelling behavior, degradability, and element analysis. The biological assessment included cell viability, alkaline phosphatase (ALP) activity. Results: 10 % alginate/ß-TCP 3D printed at 25 °C scaffold demonstrated the optimal condition for printability, swelling capability, and degradability of cell growth and nutrient diffusion. Addition of ß-TCP particles significantly improved the 3D printed material viscosity over only alginate (P < 0.05). 10 % alginate/ß-TCP enhanced MG-63 cell's proliferation (P < 0.05) and alkaline phosphatase activity (P < 0.001). Conclusion: This study demonstrated in vitro that 10 % alginate/ß-TCP bioink characteristic for fabricating 3D acellular bioprinted scaffolds was the best approach. 10 % alginate/ß-TCP bioink 3D-printed scaffold exhibited superior physical properties and promoted enhanced cell viability and alkaline phosphatase activity, showing great potential for personalized bone regeneration treatments.
RESUMO
Background/purpose: Oral health is related to general health and a person's overall well-being. The aim of the present study was to explore the association between oral health status and bite force among young adults. Materials and methods: Maximum bite force (MBF) was measured using Dental Prescale II in conjunction with a pressure-sensitive film and bite force analyzer in 40 young adults aged 20 to 40. Supragingival dental plaque was collected and cultured. Plaque weight, pH, and colony counts were assessed. The decayed, missing, and filled teeth index (DMFT) and body mass index (BMI) were recorded. Results: Bite force was negatively correlated with the number of missing teeth and the sum of missing and filled teeth. When the filled-to-remaining-teeth ratio (F/R ratio) was less than 8%, the bite force was significantly higher compared to an F/R ratio of 8-25%. Additionally, the amount of total bacteria was positively correlated with total bite force, and the quantity of Streptococcus mutans (S. mutans) along with total bacteria was positively correlated with bite force in the molar region (∗P < 0.05). The molar region predominantly contributed to bite force. Conclusion: Elevated levels of cariogenic bacteria may increase the risk of tooth loss, subsequently leading to reduced bite force. This reduction in bite force can further impact the efficiency of chewing function and, consequently, the quality of life. An F/R ratio above 8% could be easily calculated clinically and could serve as a guide to identify patients, particularly young adults, at risk of reduced bite force.
RESUMO
The efficacy of mouthwash for reducing the viral load in patients with the novel coronavirus disease 2019 (COVID-19) remains unclear. This systematic review and meta-analysis comprehensively examined the effects of chlorhexidine (CHX) and povidone-iodine (PVP-I) on the viral load in patients with COVID-19. We performed methodological analysis, systematic review, and meta-analysis of included studies using the Comprehensive Meta-analysis Software. PubMed, EMBASE, Cochrane Library, and ProQuest were searched from December 1, 2019, to December 2, 2021. In total, we included 10 studies of 1,339 patients with COVID-19. Compared with the control group, both CHX and PVP-I significantly reduced the number of negative reverse-transcription polymerase chain reaction (RT-PCR) results (p<0.001) among COVID-19 patients. The CHX and PVP-I were effective on reducing the number of negative RT-PCR results in COVID-19 patients. Additional studies using adequate randomization methods and larger samples are warned.
RESUMO
BACKGROUND: Tricalcium phosphate (TCP, Molecular formula: Ca3(PO4)2) is a hydrophilic bone graft biomaterial extensively used for guided bone regeneration (GBR). However, few studies have investigated 3D-printed polylactic acid (PLA) combined with the osteo-inductive molecule fibronectin (FN) for enhanced osteoblast performance in vitro, and specialized bone defect treatments. AIM: This study evaluated PLA properties and efficacy following glow discharge plasma (GDP) treatment and FN sputtering for fused deposition modeling (FDM) 3D printed PLA alloplastic bone grafts. METHODS: 3D trabecular bone scaffolds (8 × 1 mm) were printed by the 3D printer (XYZ printing, Inc. 3D printer da Vinci Jr. 1.0 3-in-1). After printing PLA scaffolds, additional groups for FN grafting were continually prepared with GDP treatment. Material characterization and biocompatibility evaluations were investigated at 1, 3 and 5 days. RESULTS: SEM images showed the human bone mimicking patterns, and EDS illustrated the increased C and O after fibronectin grafting, XPS and FTIR results together confirmed the presence of FN within PLA material. Degradation increased after 150 days due to FN presence. 3D immunofluorescence at 24 h demonstrated better cell spreading, and MTT assay results showed the highest proliferation with PLA and FN (p < 0.001). Cells cultured on the materials exhibited similar alkaline phosphatase (ALP) production. Relative quantitative polymerase chain reaction (qPCR) at 1 and 5 days revealed a mixed osteoblast gene expression pattern. CONCLUSION: In vitro observations over a period of five days, it was clear that PLA/FN 3D-printed alloplastic bone graft was more favorable for osteogenesis than PLA alone, thereby demonstrating great potential for applications in customized bone regeneration.
RESUMO
Background: The COVID-19 pandemic has grown to be a serious issue on a global scale. Dental care is one of the industries affected by COVID-19. The surveillance utilizing lifetime data, however, is still not clear. The purpose of this study was to use Google Trends (GT) analysis to examine symptom trends and challenges during the COVID-19 outbreak in Indonesia. Methods: Covid-19 cases retrieve from Our World in Data. The cases were collected between 1 April 2021-30 September 2021. The GT was used to discover Indonesian relative search volume (RSVs) covering the timeframe of the first outbreak covid-19 pandemic in Indonesia on 1 March 2020 until 13 February 2022. The duration of the search was chosen to reflect the relative popularity of the keywords "symptoms and dentistry practice challenge-related terms" and "coronavirus". Results: We observed that there was a significant and positive correlation between the COVID-19 daily case using GT RSV data and the COVID-19 case from Our World in Data. The COVID-19 daily case had a strong correlation with search terms related to symptoms (such as fever, sore throat, flu, toothache, and cough), drugs (such as ibuprofen, paracetamol, demacolin, bodrex, and antibiotic), and health management (such as self-isolation and telemedicine). Conclusion: Using GT may be helpful to observe the current symptoms trends as well as its challenge tendencies as a surveillance tool for a continuing pandemic like COVID-19. GT should be considered and used as it has the potential to be a powerful digital epidemiology tool that can provide more insight into disease dynamics.
Assuntos
COVID-19 , Humanos , COVID-19/epidemiologia , Pandemias , Indonésia/epidemiologia , Ferramenta de Busca , Surtos de DoençasRESUMO
BACKGROUND: Modern technological advancements have led to increase in the development of surgical robots in dentistry, resulting in excellent clinical treatment outcomes. PURPOSE: This study aimed to determine the accuracy of automatic robotic implant site preparation for different implant sizes by correlating planned and posttreatment positions, and to compare the performance of robotic and human freehand drilling. METHOD: Seventy-six drilling sites on partially edentulous models were used, with three different implant sizes (Ø = 3.5 × 10 mm, 4.0 × 10 mm, 5.0 × 10 mm). The robotic procedure was performed using software for calibration and step-by-step drilling processes. After robotic drilling, deviations in the implant position from the planned position were determined. The angulation, depth, and coronal and apical diameters on the sagittal plane of sockets created by human and robotic drilling were measured. RESULTS: The deviation of the robotic system was 3.78° ± 1.97° (angulation), 0.58 ± 0.36 mm (entry point), and 0.99 ± 0.56 mm (apical point). Comparison of implant groups showed the largest deviation from the planned position for 5 mm implants. On the sagittal plane, there were no significant differences between robotic and human surgery except for the 5-mm implant angulation, indicating similar quality between human and robotic drilling. Based on standard implant measurements, robotic drilling exhibited comparable performance to freehand human drilling. CONCLUSIONS: A robotic surgical system can provide the greatest accuracy and reliability regarding the preoperative plan for small implant diameters. In addition, the accuracy of robotic drilling for anterior implant surgery can also be comparable to that of human drilling.
Assuntos
Implantes Dentários , Procedimentos Cirúrgicos Robóticos , Cirurgia Assistida por Computador , Humanos , Implantação Dentária Endóssea/métodos , Reprodutibilidade dos Testes , Cirurgia Assistida por Computador/métodos , Desenho Assistido por Computador , Imageamento Tridimensional/métodos , Tomografia Computadorizada de Feixe CônicoRESUMO
Introduction: To overcome the genuine bioinert properties of zirconia ceramic, functionalization of the surface with the bioactive protein fibronectin was conducted. Methods: Glow discharge plasma (GDP)-Argon was first used to clean the zirconia surface. Then allylamine was treated at three different powers of 50 W, 75 W, and 85 W and immersed into 2 different fibronectin concentrations (5 µg/ml and 10 µg/ml). Results and Discussion: After surface treatment, irregularly folded protein-like substances were attached on the fibronectin coated disks, and a granular pattern was observed for allylamine grafted samples. Infrared spectroscopy detected C-O, N-O, N-H, C-H, and O-H functional groups for fibronectin treated samples. Surface roughness rose and hydrophilicity improved after the surface modification, with MTT assay showing the highest level of cell viability for the A50F10 group. Cell differentiation markers also showed that fibronectin grafted disks with A50F10 and A85F10 were the most active, which in turn encouraged late-stage mineralization activity on 21d. Up-regulation of osteogenic related mRNA expression from 1d to 10d can be observed in RT-qPCR data for ALP, OC, DLX5, SP7, OPG and RANK biomarkers. These physical and biological properties clearly indicate that an allylamine and fibronectin composite grafted surface significantly stimulated the bioactivity of osteoblast-like cells, and can be utilized for future dental implant applications.
RESUMO
Manufacturing three-dimensional (3D) objects with polymers/bioceramic composite materials has been investigated in recent years. In this study, we manufactured and evaluated solvent-free polycaprolactone (PCL) and beta-tricalcium phosphate (ß-TCP) composite fiber as a scaffold material for 3D printing. To investigate the optimal ratio of feedstock material for 3D printing, the physical and biological characteristics of four different ratios of ß-TCP compounds mixed with PCL were investigated. PCL/ß-TCP ratios of 0 wt.%, 10 wt.%, 20 wt.%, and 30 wt.% were fabricated, with PCL melted at 65 °C and blended with ß-TCP with no solvent added during the fabrication process. Electron microscopy revealed an even distribution of ß-TCP in the PCL fibers, while Fourier transform infrared spectroscopy demonstrated that the biomaterial compounds remained intact after the heating and manufacturing process. In addition, adding 20% ß-TCP into the PCL/ß-TCP mixture significantly increased hardness and Young's Modulus by 10% and 26.5%, respectively, suggesting that PCL-20 has better resistance to deformation under load. Cell viability, alkaline phosphatase (ALPase) activity, osteogenic gene expression, and mineralization were also observed to increase according to the amount of ß-TCP added. Cell viability and ALPase activity were 20% higher with PCL-30, while upregulation for osteoblast-related gene expression was better with PCL-20. In conclusion, PCL-20 and PCL-30 fibers fabricated without solvent exhibited excellent mechanical properties, high biocompatibility, and high osteogenic ability, making them promising materials for 3D printing customized bone scaffolds promptly, sustainably, and cost-effectively.
RESUMO
Preserving the marginal bone level (MBL) is essential for the long-term success of dental implant therapy, and bone remodeling around dental implants is considered to vary with time. Numerous studies comparing the platform-switching (PS) and platform-matching (PM) dental implants have indicated that PS dental implants showed a lesser reduction for the MBL, and the majority of them had a relatively short period. This study aimed to evaluate vertical and horizontal bone defects by using digital periapical radiographs to examine the changes in MBL around PM and PS dental implants over 5 years after functional loading. The vertical MBL (vMBL) was measured from the implant-abutment junction to the first bone-to-implant contact. The horizontal MBL (hMBL) was measured from the implant-abutment junction to the bone crest. All data were presented as means ± standard errors. Paired and independent t-tests with Welch's correction were used to analyze the data. A total of 61 dental implants in 38 patients after 5 years of functional loading were evaluated. Over time, PS dental implants were more likely to gain bone; by contrast, PM dental implants were more likely to lose bone during the observation time. Changes in vMBL for PS dental implants were significantly less than those for PM dental implants at 1-year (p = 0.045), 3-year (p = 0.021), and 5-year (p = 0.010) loading. Likewise, changes in hMBL for PS dental implants were significantly smaller than in those for PM dental implants at 3-year (p = 0.021) and 5-year (p = 0.006) loading; however, the changes were minimal in both approaches. PS dental implants had a significant increment in the percentage of bone integration, whereas that for PM dental implants dropped over time, with no significance. In PS dental implants that occlude with natural teeth, vertical and horizontal bone gain was observed, and it was significant at 3 years (p = 0.023). A significant horizontal bone gain was observed in the opposing natural teeth at 3-year (p = 0.002) and 5-year loading (p = 0.002). The PS concept appears to preserve more MBL around dental implants by stabilizing the vMBL and hMBL over a 5-year period. A minimal marginal bone change was detected in both concepts. The opposing natural teeth at PS dental implants showed a favorable effect on marginal bone tissues.
RESUMO
Background: The maintenance of marginal bone levels around dental implants is an important criterion for evaluating the success of implants. Although computer-aided design/computer-aided manufacturing (CAD/CAM) customized abutments (CAs) provide more flexible solutions, compared with the original preformed stock abutments (PAs), there are dimensional tolerances and underlying drawbacks in the production of CAD/CAM CAs, which may change the tightness and seamless connection between fixtures and abutments set by the manufacturer and then affect the long-term stability of the abutments. This study aimed to examine the change in both mesial and distal bone levels using digital periapical radiographs to evaluate the difference between CAD/CAM CAs and original PAs.Material and methods: Radiographs were taken before delivery; after functional loading for 1 month; and after 3, 6, and 12 months; and the vertical marginal bone levels (vMBLs) of both the mesial and distal surrounding implant bones were measured. All data are presented as means ± standard errors and were analyzed using Student's t-test. A p-value < 0.05 was judged to represent a significant difference. Results: A total of 57 implants in 50 patients were divided into 22 CAD/CAM CAs and 35 original stock abutments. The PAs appeared to have a more stable bone level. By contrast, the amount of bone level change in the CAs was higher than that in the PAs. The change in the vMBL of the CAs was significantly more than that of the PAs after functional loading for 1 month (p = 0.006), 3 months (p = 0.013), 6 months (p = 0.014), and 12 months (p = 0.002). In contrast, the distal marginal bone level was lower than the mesial marginal bone level in any period. Nevertheless, the bone levels of the CAs and PAs in any period were comparable with no significant difference. Conclusions: Significant differences were found between the mesial and distal bone levels in the PAs. The CAD/CAM CAs showed a significantly greater bone level change than the original stock abutments after functional loading.
RESUMO
Few studies have compared marginal bone loss (MBL) around implant-retaining overdentures (IODs) vs. implant-supported fixed prostheses (FPs). This study evaluated the mean MBL and radiographic bone-implant interface contact (r-BIIC) around IODs and implant-supported FPs. We also investigated osseointegration and MBL around non-submerged dental implants. We measured the changes between the MBL in the mesial and distal sites immediately after prosthetic delivery and after one year. The mean MBL and its changes in the IOD group were significantly higher. The mean percentage of r-BIIC was significantly higher in the FP group. MBL and its changes in males were significantly higher in the IOD group. The percentage of r-BIIC was significantly higher in the FP group. MBL in the lower site in the IOD group was significantly higher. Regarding MBL, the location of the implant was the only significant factor in the IOD group, while gender was the only significant predictor in the FP group. Regarding the r-BIIC percentage, gender was a significant factor in the FP group. We concluded that non-submerged dental implants restored with FPs and IODs maintained stable bone remodeling one year after prosthetic delivery.
Assuntos
Interface Osso-Implante , Revestimento de Dentadura , Remodelação Óssea , Seguimentos , Humanos , Masculino , Osseointegração , Estudos RetrospectivosRESUMO
Background: Dental caries and periodontal disease remain the most prevalent oral health problems in the world. Chewing xylitol gum may help reduce the risk of caries and periodontitis for dental health benefits. However, little evidence has shown healthy food estimation by sequencing 16S rDNA in oral microbial communities. This study investigated the clinical effect of xylitol chewing gum on dental plaque accumulation and microbiota composition using the PacBio full-length sequencing platform in 24 young adults (N = 24). The participants were randomly assigned to xylitol chewing gum and control (no chewing gum) groups. Participants in the chewing gum group chewed ten pieces of gum (a total of 6.2 g xylitol/day). Dental plaque from all teeth was collected for weighing, measuring the pH value, and analysis of microbial communities at the beginning (baseline, M0) and end of the 2-week (effect, M1) study period. Results: The results suggested a 20% reduction in dental plaque accumulation (p < 0.05) among participants chewing xylitol gum for 2 weeks, and the relative abundance of Firmicutes (a type of pathogenic bacteria associated with caries) decreased by 10.26% (p < 0.05) and that of Bacteroidetes and Actinobacteria (two types of pathogenic bacteria associated with periodontitis) decreased by 6.32% (p < 0.001) and 1.66% (p < 0.05), respectively. Moreover, the relative abundance of Fusobacteria was increased by 9.24% (p < 0.001), which has been proven to have a higher proportion in dental plaque of healthy adults. However, the dental plaque pH value stayed in a healthy range for the two groups. Conclusion: In conclusion, chewing xylitol gum would benefit cariogenic and periodontal bacterial reduction in the oral cavity, which could help to prevent the diseases related to these bacteria.
RESUMO
BACKGROUND: The objective of this study was to evaluate the effects of opposite tooth conditions on change in marginal bone level (MBL) around submerged dental implants. MATERIALS AND METHODS: The study included healthy patients with one or two implants. Structures opposite implants were either natural teeth (NT) or fixed restorations (FRs). MBLs were measured on digital periapical radiographs at the mesial and distal aspects of each implant. RESULTS: Sixty implants were inserted by the 3-year follow-up. Mean MBLs for NT were 0.21 ± 0.33 mm before prosthetic loading and 0.30 ± 0.41 mm 3 years later (p = 0.001). Mean MBLs with FRs were 0.36 ± 0.45 mm before loading and 0.53 ± 0.50 mm 3 years later (p < 0.001). Changes in mean MBL from the 6-month follow-up to the 1- and 3-year follow-ups were statistically significant (p < 0.01) for implants opposite NT. However, changes in mean MBL from the 6-month follow-up to the 1-year (p = 0.161) and 3-year follow-ups (p = 1.000) were not significant for implants opposite FRs. Between baseline and the 3-year follow-up, MBL change was relatively small and did not differ regarding NT and FRs. CONCLUSION: Bone loss was greater if submerged dental implants were opposed by FRs. MBLs around submerged implants continued to change after 3 years if NT opposed implants.
Assuntos
Perda do Osso Alveolar , Implantes Dentários , Boca Edêntula , Perda do Osso Alveolar/diagnóstico por imagem , Perda do Osso Alveolar/epidemiologia , Perda do Osso Alveolar/etiologia , Implantes Dentários/efeitos adversos , Seguimentos , Humanos , Estudos RetrospectivosRESUMO
A major number of studies have demonstrated Beta-tricalcium phosphate (ß-TCP) biocompatibility, bioactivity, and osteoconductivity characteristics in bone regeneration. The aim of this research was to enhance ß-TCP's biocompatibility, and evaluate its physicochemical properties by argon glow discharge plasma (GDP) plasma surface treatment without modifying its surface. Treated ß-TCP was analyzed by scanning electron microscopy (SEM), energy-dispersive spectrometry, X-ray photoelectron spectroscopy (XPS), X-ray diffraction analysis, and Fourier transform infrared spectroscopy characterization. To evaluate treated ß-TCP biocompatibility and osteoblastic differentiation, water-soluble tetrazolium salts-1 (WST-1), immunofluorescence, alkaline phosphatase (ALP) assay, and quantitative real-time polymerase chain reaction (QPCR) were done using human mesenchymal stem cells (hMSCs). The results indicated a slight enhancement of the ß-TCP by GDP sputtering, which resulted in a higher Ca/P ratio (2.05) than the control. Furthermore, when compared with control ß-TCP, we observed an improvement of WST-1 on all days (p < 0.05) as well as of ALP activity (day 7, p < 0.05), with up-regulation of ALP, osteocalcin, and Osteoprotegerin osteogenic genes in cells cultured with the treated ß-TCP. XPS and SEM results indicated that treated ß-TCP's surface was not modified. In vivo, micro-computed tomography and histomorphometric analysis indicated that the ß-TCP test managed to regenerate more new bone than the untreated ß-TCP and control defects at 8 weeks (p < 0.05). Argon GDP treatment is a viable method for removing macro and micro particles of < 7 µm in size from ß-TCP bigger particles surfaces and therefore improving its biocompatibility with slight surface roughness modification, enhancing hMSCs proliferation, osteoblastic differentiation, and stimulating more new bone formation.
Assuntos
Fosfatos de Cálcio/farmacologia , Células-Tronco Mesenquimais/citologia , Osteogênese/fisiologia , Animais , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Fosfatos de Cálcio/química , Diferenciação Celular/fisiologia , Proliferação de Células/fisiologia , Células Cultivadas , Humanos , Técnicas In Vitro , Masculino , Células-Tronco Mesenquimais/efeitos dos fármacos , Células-Tronco Mesenquimais/metabolismo , Modelos Animais , Coelhos , Propriedades de Superfície , Engenharia Tecidual , Microtomografia por Raio-X/métodosRESUMO
Alzheimer's disease (AD) is a neurodegenerative disease that usually affects older individuals. Owing to the higher incidence of root caries and missing teeth in elderly individuals, the bacteria involved in these dental concerns might potentially deteriorate their cognitive function. Altered microbiota in the oral cavity may induce neuroinflammation through migration from the oral cavity to the brain. However, the correlation between the composition of the oral microbiota and neurodegenerative disease remains unclear. In this study, we evaluated sequence to determine the relative abundance and diversity of bacterial taxa in the dental plaque of elderly patients with AD and controls. Oral samples; the DMFT index; and other clinical examination data were collected from 17 patients with AD and 18 normal elderly individuals as the control group. Patients with AD had significantly more missing teeth and higher dental plaque weight but lower microbial diversity than controls. Significantly increased numbers of Lactobacillales, Streptococcaceae, and Firmicutes/Bacteroidetes and a significantly decreased number of Fusobacterium were observed in patients with AD. In conclusion, using the PacBio single-molecule real-time (SMRT) sequencing platform to survey the microbiota dysbiosis biomarkers in the oral cavity of elderly individuals could serve as a tool to identify patients with AD.
Assuntos
Doença de Alzheimer , Cárie Dentária , Microbiota , Doenças Neurodegenerativas , Idoso , Doença de Alzheimer/epidemiologia , Cárie Dentária/epidemiologia , Disbiose , Humanos , RNA Ribossômico 16S/genéticaRESUMO
Absorbable porcine collagen membrane with a bovine bone graft can be considered for regenerative treatment in periodontal class II furcation defects. We evaluated the clinical efficacy of guided tissue regeneration (GTR) treatment with bovine bone xenograft and a porcine collagen membrane in molars with class II furcations. Probing depth (PD), clinical attachment level (CAL), and bone level (BL) were recorded at baseline and at 3, 6, and 9 months postoperatively. Thirty class II furcation defects from the lower and upper molars were assessed. Significant improvements in PD and CAL were observed from baseline to 9 months in all groups (p < 0.01). BL improved in all groups except group A in the upper molars in radiographic assessment (p < 0.05). The lower and upper molars showed PD reduction of 50.5% ± 7.44% and 46.2% ± 11.2%, respectively, at 9 months (p = 0.044). In furcations of 1-3 mm, the lower and upper molars showed PD reductions of 51.2% ± 4.49% and 36.5% ± 16.14%, respectively (p = 0.035). The lower and upper molars showed a CAL gain of 51.1% ± 4.64% and 33.6% ± 18.8%, respectively (p = 0.037). Thus, GTR with bovine bone graft and porcine collagen membrane yielded good results in class II furcations, with better results in the lower than in the upper molars.
Assuntos
Regeneração Tecidual Guiada Periodontal , Maxila , Animais , Bovinos , Seguimentos , Mandíbula , Membranas Artificiais , Perda da Inserção Periodontal/cirurgia , Estudos Retrospectivos , Resultado do TratamentoRESUMO
Due to autogenous bone limitations, some substitute bone grafts were developed. Collagenated porcine graft (CPG) is able to regenerate new bone, although the number of studies is insufficient, highlighting the need for future studies to better understand the biomaterial. In order to understand better CPG's possible dental guided bone regeneration indications, the aim of this work was to determine CPG's biological capacity to induce osteoblast differentiation in vitro and guided bone regeneration in vivo, whilst being compared with commercial hydroxyapatite and beta tricalcium phosphate (HA/ß-TCP) and porcine graft alone. Cell cytotoxicity (WST-1), alkaline phosphatase activity (ALP), and real-time polymerase chain reaction (qPCR) were assessed in vitro. Critical size defects of New Zealand white rabbits were used for the in vivo part, with critical size defect closures and histological analyses. WST-1 and ALP indicated that CPG directly stimulated a greater proliferation and confluency of cells with osteoblastic differentiation in vitro. Gene sequencing indicated stable bone formation markers, decreased resorption makers, and bone remodeling coupling factors, making the transition from osteoclast to osteoblast expression at the end of seven days. CPG resulted in the highest new bone regeneration by osteoconduction in critical size defects of rabbit calvaria at eight weeks. Nonetheless, all biomaterials achieved nearly complete calvaria defect closure. CPG was found to be osteoconductive, like porcine graft and HA/ß-TCP, but with higher new bone formation in critical size defects of rabbit calvaria at eight weeks. CPG can be used for different dental guided bone regeneration procedures; however, further studies are necessary.