RESUMO
The interaction of hydrophobic silicon dioxide particles (fumed silicon dioxide), as model air pollutants, and Langmuir monolayers of a porcine lung surfactant extract has been studied in order to try to shed light on the physicochemical bases underlying the potential adverse effects associated with pollutant inhalation. The surface pressure-area isotherms of lung surfactant (LS) films including increasing amounts of particles revealed that particle incorporation into LS monolayers modifies the organization of the molecules at the water/vapor interface, which alters the mechanical resistance of the interfacial films, hindering the ability of LS layers for reducing the surface tension, and reestablishing the interface upon compression. This influences the normal physiological function of LS as is inferred from the analysis of the response of the Langmuir films upon the incorporation of particles against harmonic changes of the interfacial area (successive compression-expansion cycles). These experiments evidenced that particles alter the relaxation mechanisms of LS films, which may be correlated to a modification of the transport of material within the interface and between the interface and the adjacent fluid during the respiratory cycle.
Assuntos
Surfactantes Pulmonares , Dióxido de Silício , Animais , Pulmão , Pressão , Surfactantes Pulmonares/química , Surfactantes Pulmonares/metabolismo , Propriedades de Superfície , Tensão Superficial , Tensoativos/metabolismo , SuínosRESUMO
The surface properties of saponin and saponin-chitosan mixtures were analysed as a function of their bulk mixing ratio using vibrational sum-frequency generation (SFG), surface tensiometry and dilational rheology measurements. Our experiments show that saponin-chitosan mixtures present some remarkable properties, such as a strong amphiphilicity of the saponin and high dilational viscoelasticity. We believe this points to the presence of chitosan in the adsorption layer, despite its complete lack of surface activity. We explain this phenomenon by electrostatic interactions between the saponin as an anionic surfactant and chitosan as a polycation, leading to surface-active saponin-chitosan complexes and aggregates. Analysing the SFG intensity of the O-H stretching bands from interfacial water molecules, we found that in the case of pH 3.4 for a mixture consisting of 0.1 g/L saponin and 0.001 g/L chitosan, the adsorption layer was electrically neutral. This conclusion from SFG spectra is corroborated by results from surface tensiometry showing a significant reduction in surface tension and effects on the dilational surface elasticity strictly at saponin/chitosan ratios, where SFG spectra indicate zero net charge at the air-water interface.
Assuntos
Quitosana , Saponinas , Saponinas/química , Tensão Superficial , Propriedades de Superfície , Tensoativos/química , Adsorção , Água/químicaRESUMO
The control of the behavior of oil in water emulsions requires deeper investigations on the adsorption properties of the emulsion stabilizers at the interfaces, which are fundamental to explain the (de)stabilization mechanisms. In this work, we present an extensive study on oil-in-water emulsions stabilized by sodium dodecyl sulfate (SDS) below its critical micellar concentration. Dynamic tensiometry, dilational rheology, and electrical conductivity measurements are used to investigate the adsorption properties at the droplet interface, whereas the aging of the respective emulsions was investigated by monitoring the macroscopic thickness of the emulsion layer, by microimaging and dynamic light scattering (DLS) analysis, to get information on the drop size distribution. In addition, the droplet coalescence is investigated by a microscopy setup. The results of this multitechnique study allow deriving a coherent scenario where the adsorption properties of this ionic surfactant relate to those of the emulsion, such as, for example, the prevention of droplet coalescence and the presence of other mechanisms, such as Ostwald ripening, responsible for the emulsion aging.
RESUMO
Particle-laden interfaces are ubiquitous nowadays. The understanding of their properties and structure is essential for solving different problems of technological and industrial relevance; e.g. stabilization of foams, emulsions and thin films. These rely on the response of the interface to mechanical perturbations. The complex mechanical response appearing in particle-laden interfaces requires deepening on the understanding of physico-chemical mechanisms underlying the assembly of particles at interface which plays a central role in the distribution of particles at the interface, and in the complex interfacial dynamics appearing in these systems. Therefore, the study of particle-laden interfaces deserves attention to provide a comprehensive explanation on the complex relaxation mechanisms involved in the stabilization of fluid interfaces.
RESUMO
The effect of the incorporation of hydrophilic titanium dioxide (TiO2) nanoparticles on the interfacial properties of Langmuir monolayers of 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC) has been evaluated combining interfacial thermodynamic studies, dilatational rheology, and Brewster angle microscopy (BAM). The results show that the TiO2 nanoparticles are able to penetrate DPPC layers, modifying the organization of the molecules and, consequently, the phase behavior and viscoelastic properties of the systems. Measurements of dilational viscoelasticity against the frequency have been performed, using the oscillatory barrier method, at different values of the surface pressure corresponding to different degrees of compression of the monolayer. The presence of TiO2 nanoparticles also affects the dynamic response of the monolayer modifying both the quasi-equilibrium dilatational elasticity and the high frequency limit of the viscoelastic modulus. The principal aim of this work is to understand the fundamental physicochemical bases related to the incorporation of specific nanoparticles of technological interest into the interfacial layer with biological relevance such as phospholipid layers. This can provide information on potential adverse effects of nanoparticles for health and the environment.
RESUMO
The properties and structure of different types of interfacial layers obtained from aqueous dispersions of nanometric silica and palmitic acid (PA) have been studied and characterized by different diagnostics and measurements. The investigations concern PA monolayers spread on the silica dispersions, dispersions in contact with PA solutions in oil and silica dispersions containing PA, aiming at elucidating the role of the PA interaction with the particles and investigating the surface-activity of the originated silica-PA complexes. Drop shape tensiometry was utilized to measure the dynamic surface and interfacial tension while a Langmuir trough apparatus was used to obtain compression isotherms of the spread PA layers and to measure the dilational viscoelasticity according to the oscillating barrier method. Brewster angle microscopy and ellipsometry were utilized to investigate the lateral and vertical structure of the interfacial layers. From this multifold approach emerges a complex picture of the features of these interfacial layers that can be rationalized on the basis of the adsorption of PA on the particle surface. The results evidence a threshold in PA adsorption above which particles change from hydrophilic to partially hydrophobic, promoting their incorporation into the interfacial layer.
RESUMO
We studied silica suspensions with chitosan and biodegradable synthetic surfactant lauroyl ethyl arginate (LAE). Hydrophilic and negatively charged silica nanoparticles were neutralised due to the coating with chitosan. That presence of LAE led to the partial hydrophobisation of their surface, which favoured their attachment to the surface of a thin foam film. It was found that the presence of small and medium-sized (6-9 nm) hydrophobic particles in the interfacial layer of lamella foam film inhibited the coalescence and coarsening processes, which prolonged the life of the foam. Furthermore, hydrophobising of 30 nm particles allowed the formation of large aggregates precipitating from the mixture under steady-state conditions. These aggregates, however, under the conditions of the dynamic froth flotation process in the foam column, were floated into the foam layer. As a result, they were trapped in the foam film and Plateau borders, effectively preventing liquid leakage out of the foam. These results demonstrate the efficiency of using chitosan-LAE mixtures to remove silica nanoparticles from aqueous phase by foaming and flotation.
RESUMO
In this review, we highlight and discuss the effects of interfacial properties on the major mechanisms governing the aging of emulsions: flocculation, coalescence and Ostwald ripening. The process of emulsification is also addressed, as it is well recognized that the adsorption properties of emulsifiers play an important role on it. The consolidated background on these phenomena is briefly summarised based on selected literature, reporting relevant findings and results, and discussing some criticalities. The typical experimental approaches adopted to investigate the above effects are also summarised, underlining in particular the role of adsorption at the droplet interface. Attention is paid to different types of surface-active species involved with emulsion production, including solid particles. The latter being of increasing interest in a wide variety of emulsions-related products and technologies in various fields. The possibility to stop the long term aging caused by Ostwald ripening in emulsions is also discussed, quantifying under which conditions it may occur in practice.
RESUMO
The present work is aimed at investigating the chemicophysical properties of the interface between silicone oils (SOs) used in vitreoretinal surgery and aqueous solutions, in the presence of surfactant biomolecules. Such molecules are thought to play an important role in the formation of SO emulsions in vitrectomised eyes, in which the natural vitreous body has been replaced with a SO. In particular, we have measured the interfacial tension (IT) and the interfacial dilational viscoelasticity (DV) of the interface between SO (Siluron 1000) and serum proteins (albumin and γ-globulins) at various concentrations in a Dulbecco alkaline buffer. The equilibrium IT value is relevant for the onset of emulsification, and the DV influences the stability of an emulsion, once formed. The study is complemented by preliminary emulsification tests. The experimental results show that, when proteins are dissolved in the aqueous solution, the rheological properties of the interface change. The IT decreases significantly for physiological protein concentrations, and the DV modulus achieves high values, even for small protein concentrations. The emulsification tests confirm that, in the presence of proteins, emulsions are stable on the time scale of months. We conclude that the measured values of IT in the presence of serum proteins are compatible with the promotion of droplet formation, which, in addition, are expected to be stable against coalescence. Adsorption of biomolecules at the interface with the SO is, therefore, likely to play an important role in the generation of an emulsion in eyes subjected to vitrectomy. These findings are relevant to identify strategies to avoid or control the formation of emulsions in eyes.
Assuntos
Óleos de Silicone/química , Cirurgia Vitreorretiniana/métodos , Adsorção , Emulsões/química , Tamponamento Interno/métodos , Humanos , Técnicas In Vitro , Óleos/química , Descolamento Retiniano/metabolismo , Descolamento Retiniano/cirurgia , Reologia , Albumina Sérica Humana/química , Albumina Sérica Humana/metabolismo , Tensão Superficial , Tensoativos/química , Viscosidade , Vitrectomia/métodos , Corpo Vítreo/química , Corpo Vítreo/metabolismo , Corpo Vítreo/cirurgia , Água , gama-Globulinas/química , gama-Globulinas/metabolismoRESUMO
In this work we investigate the surface properties and foamability of saponin and mixed saponin-chitosan solutions. These natural compounds are widely used in various cosmetic, pharmaceutical and food technologies because of their efficiency as bio-active components and their biodegradability. These compounds and their mixture were investigated versus the composition by surface tension and dilational rheology measurements and the respective foams analysed at the formation and during their entire time evolution. The results show that these systems present peculiarities relevant for their utilisation as foam stabilisers, such as strong amphiphilicity of saponin and high values of dilational viscoelasticity. The behaviour of foams has been interpreted on the basis of the adsorption properties at liquid-air interface and the interfacial rheology. Specifically, we found a remarkable effect of the chitosan on the long-time stability of foams. This has been explained considering the changes of the bulk properties induced by chitosan, which influence also the dynamics of the saponin adsorption. This work aims to contribute to the development of new formulations of biodegradable and biocompatible foams for industrial applications, where it is advantageous to reduce the use of synthetic surfactants in commercial products.
Assuntos
Quitosana/química , Saponinas/química , Tensoativos/química , Adsorção , Tamanho da Partícula , Reologia , Soluções , Propriedades de Superfície , ViscosidadeRESUMO
An investigation is reported on the interfacial properties of nanometric colloidal silica dispersions in the presence of a cationic surfactant. These properties are the result of different phenomena such as the particle attachment at the interface and the surfactant adsorption at the liquid and at the particle interfaces. Since the latter strongly influences the hydrophobicity/lipophilicity of the particle, i.e., the particle affinity for the fluid interfacial environment, all those phenomena are closely correlated. The equilibrium and dynamic interfacial tensions of the liquid/air and liquid/oil interfaces have been measured as a function of the surfactant and particle concentration. The interfacial rheology of the same systems has been also investigated by measuring the dilational viscoelasticity as a function of the area perturbation frequency. These results are then crossed with the values of the surfactant adsorption on the silica particles, indirectly estimated through experiments based on the centrifugation of the dispersions. In this way it has been possible to point out the mechanisms determining the observed kinetic and equilibrium features. In particular, an important role in the mixed particle-surfactant layer reorganization is played by the Brownian transport of particles from the bulk to the interface and by the surfactant redistribution between the particle and fluid interface.
RESUMO
The mechanical properties of liquid-fluid systems, like the dynamic interfacial tension and interfacial rheology are closely related to the kinetic processes involved and to the behaviour of the adsorbed molecules. Therefore, provided suitable models and experimental methods are set, investigating these properties allows qualitative and quantitative information on these processes to be drawn. This paper presents recent developments in dilational rheology of liquid-fluid adsorption layers, including experimental methods, models and experimental data concerned with surfactants undergoing transformations in the adsorption layer. Models account both for relaxation due to surfactant diffusion and to processes internal to the adsorption layer. In particular surfactant reorientation, aggregation phase transitions and interfacial chemical reactions have been considered as possible reorganisation processes. The presented approach, allows the dilational viscoelasticity to be derived as a function of the perturbation frequency and of the equilibrium and kinetic parameters of the system. The results can also be easily specified for insoluble monolayer. The principal experimental techniques are reviewed and the recent progresses in the implementation of an Oscillation Bubble/Drop method for Capillary Pressure Tensiometer are discussed in detail. Two experimental studies of surfactants characterised by re-orientation and aggregation phase transition are presented. Beside providing a wider comprehension of these mechanisms, the interpretation of the dilational visco-elasticity data, according to the developed models, allows the effective estimation of the equilibrium and kinetic parameters.
Assuntos
Elasticidade , Soluções/química , Tensoativos/química , Viscosidade , Adsorção , Difusão , Hexanos/química , Cinética , Modelos Estatísticos , Modelos Teóricos , Transição de Fase , Reologia , Tensão Superficial , Termodinâmica , Água/químicaRESUMO
The incorporation of silica nanoparticles (NPs) from the subphase into Langmuir lipid monolayers formed by three components, 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC), 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) and Cholesterol (Chol), modifies the thermodynamic and rheological behavior, as well as the structure of the pristine lipid film. Thus, the combination of structural characterization techniques, such as Brewster Angle Microscopy (BAM) and Atomic Force Microscopy (AFM), with interfacial thermodynamic and dilational rheology studies has allowed us to deepen on the physico-chemical bases governing the interaction between lipid molecules and NPs. The penetration of NPs driven by the interaction (electrostatic or hydrogen bonds) with the polar groups of the lipid molecules affects the phase behaviour (surface pressure-area, Ð-A , isotherm) of the monolayer. This can be easily rationalized considering the modification of the packing and cohesion of the molecules at the interface as revealed BAM and AFM images. Furthermore, oscillatory barrier experiments have allowed obtaining information related to the effect of NPs on the monolayer response under dynamic conditions that presents a critical impact on the characterization of biological relevant systems because most of the processes of interest for these systems present a dynamic character.
Assuntos
Lipídeos/química , Nanopartículas/química , Dióxido de Silício/química , ReologiaRESUMO
An experimental study is here presented on the properties of aqueous dispersions containing carbon nanoparticles and different ionic surfactants which can modify the degree of hydrophobicity/philicity of particles favoring their transfer from the dispersion bulk to the interfacial layer. Aim of this work is to understand the particle-surfactant and particle-fluid interface interactions and their effect on those macroscopic surface properties of the mixed systems which are expected related to the stability and structure of the respective particle stabilized foams. To this purpose a systematic characterization of dispersions have been carried out, based on surface tension measurement against the surfactant concentration, using a drop Profile Analysis Tensiometer (PAT). These results have been crossed with the characterization of the bulk dispersion by Dynamic Light Scattering (DLS) and ζ-potential measurements to check the effects of surfactant on the particle aggregation and on the particle surface charge, respectively. The stability of the foams obtained with the same compositions has been also investigated and correlated to the other surface and bulk properties.
RESUMO
The effect of a cationic surfactant, hexadecyltrimethylammonium bromide (CTAB), on the interfacial properties of seawater has been studied by dynamic and equilibrium surface tension and by dilational rheology essays. Important modifications of the surface tension and dilational rheology response have been observed already at the very low CTAB concentrations, where the effects due to the high ionic strength are negligible. The comparison with the effects of CTAB in different seawater models, or in natural seawater fractions, points out the establishment of strong interactions between the surfactant molecules and the lipophilic fraction of organic material dispersed/dissolved in seawater, affecting the interfacial activity of the molecules. Considering the biochemical richness of seawater, these results can be explained assuming interaction mechanisms and adsorption schemes similar to those speculated for protein and other macromolecules in the presence of surfactants, which in fact show similar features. Thus already at the low concentrations the surfactant molecules form highly surface-active complexes with part of the organic fraction of seawater. At the larger surfactant concentrations these complexes compete for adsorption with an excess of free CTAB molecules which, according to the thermodynamic conditions, are most favoured to occupy the liquid interface. The results of this study underline the important role of the sea organic content in enhancing the surface-activity of surfactants, which is relevant for a deeper understand of the direct and indirect effects of these types of pollutants on the physico-chemical environment in the sea coastal areas and develop mitigation strategies.
Assuntos
Água do Mar/química , Tensoativos/química , Cetrimônio , Compostos de Cetrimônio/químicaRESUMO
Langmuir monolayers of Cholesterol (Chol) and a mixture of Chol with 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC), at a ratio of 17:83 in weight, spread on pure water and on silica nanoparticle dispersions, have been investigated measuring the compression isotherms as well as the surface pressure response to harmonic area variation of the monolayer. Aim of this study was to evaluate the effects of the interaction of silica nanoparticles with Chol and the conditions for the incorporation in the monolayer. In previous works on different kind of lipid monolayers, it has been shown that hydrophilic silica nanoparticles dispersed in the sub-phase may transfer into the monolayer, driven by the interaction with the lipid molecules that make them partially hydrophobic. The results here obtained indicate that also for Chol and Chol-DPPC mixtures the presence of silica nanoparticles may have important effects on the phase behaviour and structural properties of the monolayer. As confirmed by complementary structural characterisations, BAM, AFM and ellipsometry, the principal effect of the nanoparticle incorporation is the disruption of the monolayer packing, owing to the alteration of the cohesive interactions of lipid components.