Connexin43 promotes exocytosis of damaged lysosomes through actin remodelling.

A robust and efficient cellular response to lysosomal membrane damage prevents leakage from the lysosome lumen into the cytoplasm. This response is understood to happen through either lysosomal membrane repair or lysophagy. Here we report exocytosis as a third response mechanism to lysosomal damage, which is further potentiated when membrane repair or lysosomal degradation mechanisms are impaired. We show that Connexin43 (Cx43), a protein canonically associated with gap junctions, is recruited from the plasma membrane to damaged lysosomes, promoting their secretion and accelerating cell recovery. The effects of Cx43 on lysosome exocytosis are mediated by a reorganization of the actin cytoskeleton that increases plasma membrane fluidity and decreases cell stiffness. Furthermore, we demonstrate that Cx43 interacts with the actin nucleator Arp2, the activity of which was shown to be necessary for Cx43-mediated actin rearrangement and lysosomal exocytosis following damage. These results define a novel mechanism of lysosomal quality control whereby Cx43-mediated actin remodelling potentiates the secretion of damaged lysosomes.

Serial Mass Screening for Tuberculosis Among Incarcerated Persons in Brazil.

BACKGROUND: An active search for tuberculosis cases through mass screening is widely described as a tool to improve case detection in hyperendemic settings. However, its effectiveness in high-risk populations, such as incarcerated people, is debated. METHODS: Between 2017 and 2021, 3 rounds of mass screening were carried out in 3 Brazilian prisons. Social and health questionnaires, chest X-rays, and Xpert MTB/RIF were performed. RESULTS: More than 80% of the prison population was screened. Overall, 684 cases of pulmonary tuberculosis were diagnosed. Prevalence across screening rounds was not statistically different. Among incarcerated persons with symptoms, the overall prevalence of tuberculosis per 100 000 persons was 8497 (95% confidence interval [CI], 7346-9811), 11 115 (95% CI, 9471-13 082), and 7957 (95% CI, 6380-9882) in screening rounds 1, 2, and 3, respectively. Similar to our overall results, there were no statistical differences between screening rounds and within individual prisons. We found no statistical differences in Computer-Aided Detection for TB version 5 scores across screening rounds among people with tuberculosis-the median scores in rounds 1, 2, and 3 were 82 (interquartile range [IQR], 63-97), 77 (IQR, 60-94), and 81 (IQR, 67-92), respectively. CONCLUSIONS: In this environment with hyperendemic rates of tuberculosis, 3 rounds of mass screening did not reduce the overall tuberculosis burden. In prisons, where a substantial number of tuberculosis cases is undiagnosed annually, a range of complementary interventions and more frequent tuberculosis cases screening may be required.

Multi-trait index: selection and recommendation of superior black bean genotypes as new improved varieties.

Common bean provides diet rich in vitamins, fiber, minerals, and protein, which could contribute into food security of needy populations in many countries. Developing genotypes that associate favorable agronomic and grain quality traits in the common bean crop could increase the chances of adopting new cultivars black bean. In this context, the present study aimed at selection of superior black bean lines using multi-variate indexes, Smith-Hazel-index, and genotype by yield*trait biplot analysis. These trials were conducted in Campos dos Goytacazes - RJ, in 2020 and 2021. The experimental design used was randomized blocks, with 28 treatments and three replications. The experimental unit consisted of four rows 4.0 m long, spaced at 0.50 m apart, with a sowing density of 15 seeds per meter. The two central rows were used for the evaluations. The selection of superior genotypes was conducted using the multiple trait stability index (MTSI), multi-trait genotype-ideotype distance index (MGIDI), multi-trait index based on factor analysis and genotype-ideotype distance (FAI-BLUP), Smith-Hazel index, and Genotype by Yield*Trait Biplot (GYT). The multivariate indexes efficiently selected the best black bean genotypes, presenting desirable selection gains for most traits. The use of multivariate indexes and GYT enable the selection of early genotypes with higher grain yields. These lines G9, G13, G17, G23, and G27 were selected based on their performance for multiple traits closest to the ideotype and could be recommended as new varieties.

Interleukin-27 Regulates Adaptative Immune Responses Associated With Control of Parasite Replication in Canine Leishmaniasis.

Interleukin 27 (IL-27) is a cytokine that regulates susceptibility to Leishmania infantum infection in humans and experimental models. This cytokine has not yet been described in canine leishmaniasis (CanL). Therefore, we investigated whether IL-27 has a regulatory role in CanL. The EBI3 and p28 subunits of IL-27 were measured in splenic leukocytes culture supernatant from dogs with CanL and compared to control dogs. We also correlated EBI3 and p28 levels with IL-21, anti-L. infantum antibodies and parasite loads. We performed functional assays followed by IL-27 blockade and measured parasite loads, production of cytokines in splenic leukocytes culture supernatant, and the expression of PD-1, CTLA-4, phospho-Stat-1/3, T-bet, GATA3 and nitric oxide production (NO). Both IL-27 subunits increased in the supernatant of dogs with CanL compared to control dogs. EBI3 and p28 levels showed a moderate positive correlation with IL-21 (r = 0.67, p < 0.0001 and r = 0.45, p < 0.012, respectively), and the EBI3 subunit was positively associated with anti-L. infantum IgG antibodies (r = 0.38, p < 0.040) and parasite load (r = 0.47, p < 0.009). IL-27 and IL-21 participate of immune responses in CanL. IL-27 may be associated with the failure of immunity to control parasite replication via upregulation of the expression of PD-1, CTLA-4, T-bet and NO in splenic leukocytes from dogs with CanL. These findings suggest that the pathways regulated by IL-27 are involved in CanL pathogenesis in the host, and may be targets for new therapies.

H2OAthletes study protocol: effects of hydration changes on neuromuscular function in athletes.

We aim to understand the effects of hydration changes on athletes' neuromuscular performance, on body water compartments, fat-free mass hydration and hydration biomarkers and to test the effects of the intervention on the response of acute dehydration in the hydration indexes. The H2OAthletes study (clinicaltrials.gov ID: NCT05380089) is a randomised controlled trial in thirty-eight national/international athletes of both sexes with low total water intake (WI) (i.e. < 35·0 ml/kg/d). In the intervention, participants will be randomly assigned to the control (CG, n 19) or experimental group (EG, n 19). During the 4-day intervention, WI will be maintained in the CG and increased in the EG (i.e. > 45·0 ml/kg/d). Exercise-induced dehydration protocols with thermal stress will be performed before and after the intervention. Neuromuscular performance (knee extension/flexion with electromyography and handgrip), hydration indexes (serum, urine and saliva osmolality), body water compartments and water flux (dilution techniques, body composition (four-compartment model) and biochemical parameters (vasopressin and Na) will be evaluated. This trial will provide novel evidence about the effects of hydration changes on neuromuscular function and hydration status in athletes with low WI, providing useful information for athletes and sports-related professionals aiming to improve athletic performance.

Sleep deprivation increases the regularity of isometric torque fluctuations.

The regularity of the fluctuations present in torque signals represent the adaptability of the motor control. While previous research showed how it is affected by neuromuscular fatigue and ageing, the underlying mechanisms remain unclear. It is currently under debate whether these changes are explained by central or peripheral neuromuscular mechanisms. Here, we experimentally manipulated the sleep of thirteen young adults through a supervised 24 h-sleep deprivation protocol. This study aimed to investigate the effect of sleep deprivation on the regularity of torque fluctuations, and other standard torque-related outcomes (Peak Torque - PT - and Rate of Torque Development - RTD). The participants were asked to perform knee extension maximal voluntary contractions (MVC) and submaximal knee extensions at 40% of MVC for 30 s. PT and RTD were calculated from the MVC and the regularity of the torque fluctuations was determined on the submaximal task through Sample Entropy (SampEn). In addition, rate of perceived effort (RPE) was collected. We found no significant changes in PT and RTD. The regularity of torque fluctuations significantly increased (i.e., a decrease in SampEn) after 24 h-sleep deprivation (PRE = 1.76 ± 0.268, POS24 = 1.71 ± 0.306; p = 0.044). Importantly, we found a negative correlation between RPE and SampEn relative changes after sleep deprivation. This study brings new insights towards the understanding of the underlying mechanisms that explain changes in torque fluctuations, demonstrating that these changes are not limited to neuromuscular processes but are also likely to be affected by other domains, such as psychological profile, which can indirectly affect the neural drive to the muscles.

Economic games can be used to promote cooperation in the field.

We present experimental evidence of the impact of playing a game on real-life cooperation. The game was framed as a pest-management activity, the effectiveness of which depends on the decisions of others. Playing the game changes behavior in the field, increasing the participation in all collective activities directed at reducing pest pressure. The economic impact of those activities is important, leading to losses that are ∼20% lower than in the control group. Increased cooperation reflects changes in the understanding of others' willingness to cooperate, not changes in the understanding of underlying technological interdependencies.

Enhancing RECK Expression Through miR-21 Inhibition: A Promising Strategy for Bladder Carcinoma Control.

Bladder carcinoma (BC) is the tenth most frequent malignancy worldwide, with high morbidity and mortality rates. Despite recent treatment advances, high-grade BC and muscle-invasive BC present with significant progression and recurrence rates, urging the need for alternative treatments. The microRNA-21 (miR-21) has superexpression in many malignancies and is associated with cellular invasion and progression. One of its mechanisms of action is the regulation of RECK, a tumor suppressor gene responsible for inhibiting metalloproteinases, including MMP9. In a high-grade urothelial cancer cell line, we aimed to assess if miR-21 downregulation would promote RECK expression and decrease MMP9 expression. We also evaluated cellular migration and proliferation potential by inhibition of this pathway. In a T24 cell line, we inhibited miR-21 expression by transfection of a specific microRNA inhibitor (anti-miR-21). There were also control and scramble groups, the last with a negative microRNA transfected. After the procedure, we performed a genetic expression analysis of miR-21, RECK, and MMP9 through qPCR. Migration, proliferation, and protein expression were evaluated via wound healing assay, colony formation assay, flow cytometry, and immunofluorescence.After anti-miR-21 transfection, miR-21 expression decreased with RECK upregulation and MMP9 downregulation. The immunofluorescence assay showed a significant increase in RECK protein expression (p < 0.0001) and a decrease in MMP9 protein expression (p = 0.0101). The anti-miR-21 transfection significantly reduced cellular migration in the wound healing assay (p < 0.0001). Furthermore, in the colony formation assay, the anti-miR-21 group demonstrated reduced cellular proliferation (p = 0.0008), also revealed in the cell cycle analysis by flow cytometry (p = 0.0038). Our results corroborate the hypothesis that miR-21 is associated with BC cellular migration and proliferation, revealing its potential as a new effective treatment for this pathology.

Fishing profile and commercial landings of shark and batoids in a global elasmobranchs conservation hotspot.

This paper describes the fishing profile and the temporal variation in the commercial landings of elasmobranchs in a global hotspot for their conservation and investigates the variables that influenced the landings. Census data on commercial catches were obtained between April 2008 and October 2010 from nine landing sites in Bragança (Pará, northern Brazil). Five vessel types, four fishing gears, and eight fishing techniques engaged with elasmobranch capture were identified. A total of 2,357 landings were recorded, with a total production of 354 t. The highest yields were recorded in 2009, with sharks being harvested mostly by small and medium-sized vessels, and batoids, by small vessels and canoes. Drifting nets and longlines played a prominent role in elasmobranch fisheries. The results show that the landings were influenced by days at sea, which is common in tropical fisheries. The elasmobranch data series is discontinuous as statistics are absent for most fishing sites albeit imperative for proper management, as well as relevant for decision-makers focusing on their conservation.

Optimal Minimum-Velocity Threshold to Predict One-repetition Maximum for the Back Squat.

The prediction of one-repetition maximum (1RM) is highly relevant for strength and conditioning. The optimal minimum-velocity threshold (MVT) was recently proposed to increase the accuracy of 1RM predictions. Individual load-velocity profiles (LVP) were obtained in 18 athletes enrolled in recreational soccer. Reliability analyses were computed for all LVP-derived variables. Estimations of 1RM were made based on general (0.3 m.s- 1), pre-individual (mean velocity at 1RM obtained in a preliminary session) and optimal MVT (velocity that eliminates the difference between actual and predicted 1RM, determined in a preliminary session). The accuracy of 1RM predictions was examined using absolute-percent error and Bland-Altman plots. Between-day reliability of the LVP and 1RM was good (intraclass-correlation coefficients - ICCs>0.9 and coefficients of variation - CVs<5%). The individual and optimal MVT reached moderate-to-good reliability (ICCs>0.9 and CVs<10%, respectively). The predictions based on the optimal MVT displayed greater accuracy than those obtained with the individual and general MVT (absolute percent error: 2.8 vs. 5.5 vs. 4.9%, respectively). However, wide limits of agreement (LoA) were found between actual and estimated 1RM using this approach (~15 kg). Data indicate that the optimal MVT provides better estimations of 1RM for the free-weight back squat than the general and the individual MVT.

Average optimal minimum velocity threshold: A practical variable to increase the accuracy of one-repetition maximum estimation during the free-weight back squat.

The prediction of one-repetition maximum (1RM) using the submaximal load-velocity relationship (LVR) is highly relevant for the field of strength and conditioning. The optimal minimum velocity threshold (MVT) was recently proposed to increase the accuracy of 1RM predictions. However, using the average optimal MVT would allow for more practical estimations. LVRs of the free-weight back squat were obtained in 53 participants, throughout 2 sessions. LVRs were obtained using the multi- and two-point methods. Estimations of 1RM were made based on the average actual MVT (1RM velocity) and the average optimal MVT. The accuracy of 1RM predictions was examined using absolute-percent error and Bland-Altman plots. Cross-validation was performed using a leave-one-out approach. The number of selected loads did not affect the slope, y-intercept, optimal MVT or the accuracy of 1RM predictions. Predictions based on the average optimal MVT displayed greater accuracy than those obtained with the average actual MVT (~6% vs. ~8% absolute-percent error, respectively). However, wide 95% limits of agreement (LoA) were found between actual and estimated 1RM using both approaches (~13%1RM). The average optimal MVT offers more accurate 1RM estimations than the average actual MVT. However, errors prove substantial, making it challenging to precisely track minor changes in 1RM.

Effectiveness of self-etching bonding systems on dentin after radiotherapy: perspectives on microtensile and microshear bond strength.

OBJECTIVE: Self-etching dental adhesives bond with dentin through chemical reactions with calcium. This study assessed bond strength (BS) using microtensile (µTBS) and microshear (µSBS) tests on sound and post-radiotherapy dentin, with dental adhesives containing different functional monomers. METHODS: Sound dentin (SD) and post-radiotherapy irradiated dentin (ID) were tested with two adhesive systems: Clearfil SE Bond (SE, 10-MDP-based) and FL Bond II (FL, containing carboxylic and phosphonic monomers with S-PRG bioactive particles). The tests occurred initially (24 h) and six months later; fracture mode was also analyzed (40x). Ninety-six human molars were randomly assigned (n = 12), and half were irradiated with a 70 Gy radiation dose. For µTBS test, teeth were bonded, restored and sectioned them into beams (0.64 mm2). The µSBS test used filled transparent cylindrical matrices with resin composite and light-cured them after dental adhesive applications. Three-way ANOVA and Tukey's test (p < 0.05) analyzed the data. RESULTS: µTBS showed a significant substrate x adhesive interaction (p < 0.001), while µSBS was significant for all factors (p = 0.006). SE and FL performed better on SD and ID, respectively, in the µTBS test. As for µSBS, SE showed higher values on ID (p < 0.05). Lower BS values occurred for SD-FL and ID-SE after six months. CONCLUSION: Dental adhesive performance varied based on substrate type and test method. FL was more stable for ID in µTBS, while SE excelled in µSBS. CLINICAL RELEVANCE: As post-radiotherapy irradiated dentin becomes more vulnerable, self-etching systems based on functional monomer and bioactive ingredients may exhibit appropriate bonding to this altered substrate.

Influence of bioceramic sealers on dentinal tubule penetration and antimicrobial effectiveness: a systematic review and meta-analysis of in vitro studies.

The aim of this systematic review and meta-analysis (SRM) was to evaluate whether bioceramic sealers have better penetration capacity in dentinal tubules and antimicrobial activity when compared to AH Plus® sealer. This SRM was recorded in the Open Science Framework database and followed the guidelines of the PRISMA 2020. Five databases were searched by two independent reviewers. Only in vitro studies that evaluated the effects of bioceramic sealers on dentinal tubule penetration and antimicrobial activity outcomes compared to AH Plus® sealer were included. Meta-analysis was conducted using R software, using the effect measure of the standardized mean difference (SMD) and inverse variance method. A modified Joanna Briggs Institute's Checklist was used for the risk of bias assessment. A total of 1486 studies were identified, and only 54 studies that fulfilled our eligibility criteria were included in this review. There was no statistical difference between the sealers evaluated for dentinal tubule penetration, in the thirds evaluated: coronal SMD 0.58 [0.14; 1.31], p = 0.12; middle SMD 0.07 [0.54; 0.39], p = 0.75; and apical SMD 0.08 [0.73; 0.56], p = 0.80. Both sealers demonstrated similar antimicrobial action (SMD [3.42; 5.32], p = 0.67 and SMD 0.67 [1.89; 0.55], p = 0.28). The studies presented a low risk of bias. Based on the in vitro studies included and according to the limitations of the present review, the data suggest that bioceramic and AH Plus® sealers present similar penetration capacity in dentinal tubules and antimicrobial effect, making them suitable materials to be considered in clinical practice.

Fluorescence intensity of composite resin for direct veneer removal using a fluorescence-aided identification technique.

OBJECTIVES: This laboratory study evaluated the influence of the fluorescence intensity of composite resins on additional tooth wear and the presence of restorative material in different dental thirds during the retreatment of direct veneers. MATERIALS AND METHODS: The crown dimensions of 60 bovine incisors were reduced to 10 × 8 mm. The teeth were classified according to the fluorescence intensity of the composites: low (LOW) (TPH Spectra), medium (MED) (Opallis), and high (HIGH) (Essentia) groups. The teeth were divided according to the removal methods: conventional (CON) and fluorescence-aided identification technique (FIT). The specimens were scanned (T0), received veneer preparation, and scanned again (T1). After restorations, the composites were removed and the teeth were scanned (T2). Measurement assessments between T1 and T2 were performed to determine additional wear, presence of residual areas, and the average between additional wear and the presence of residual areas. Kruskal Wallis, Mann-Whitney, Friedman, 2-way ANOVA, and post-Tukey tests were performed (α < 0.05). RESULTS: The comparison of composite resins indicated a smaller area of additional wear and greater residue presence in the HIGH group than the LOW group for both techniques in the cervical third. Regarding removal methods, the FIT produced greater additional wear than the CON method for the LOW and MED groups in the middle and cervical thirds. The incisal third exhibited greater additional wear than the other thirds. CONCLUSIONS: Composite resins with high fluorescence intensity removed using FIT had less tooth wear. The incisal third was the most affected area for direct veneer removal procedures. CLINICAL SIGNIFICANCE: A FIT has been proposed for composite resin removal; however, the different fluorescence intensities of composite resins can influence tooth wear caused during this procedure.

Validation of a Single-Session Protocol to Determine the Load-Velocity Profile and One-Repetition Maximum for the Back Squat Exercise.

ABSTRACT: Gomes, M, Fitas, A, Santos, P, Pezarat-Correia, P, and Mendonca, GV. Validation of a single session protocol to determine the load-velocity profile and one-repetition maximum for the back squat exercise. J Strength Cond Res 38(6): 1013-1018, 2024-We investigated whether a single session of absolute incremental loading is valid to obtain the individual load-velocity profile (LVP) and 1 repetition maximum (1RM) for the free-weight parallel back squat. Twenty strength-trained male subjects completed 3 testing sessions, including a baseline 1RM session and 2 LVP sessions (LVP rel based on incremental relative loads and LVP abs based on absolute load increments until 1RM). The 1RM load was compared between the baseline and LVP abs . The load at zero velocity (load-axis intercept [L 0 ]), maximal velocity capacity (velocity-axis intercept [V 0 ]), slope, and area under the load-velocity relationship line (A line ) were compared between the LVP rel and LVP abs using equivalence testing through 2 one-sided t -tests. Measurement accuracy was calculated using the absolute percent error. The 1RM measured at baseline and LVP abs was equivalent and presented a low absolute percent error (1.2%). The following LVP parameters were equivalent between LVP rel and LVP abs : 1RM, L 0 , and A line because the mean difference between sessions was close to zero and the Bland-Altman limits of agreement (1RM:5.3 kg; L 0 :6.8 kg; A line : 9.5 kg·m -1 ·s -1 ) were contained within the a priori defined ± equivalent margins (5% for 1RM and L 0 and 10% for A line ). The aforementioned variables presented a low absolute percent error. However, slope and V 0 were not equivalent between sessions. In conclusion, a single session of absolute incremental loading is a valid approach to obtain the L 0 and A line of the individual LVP and 1RM, and can be used to efficiently track the magnitude of neuromuscular adaptations throughout the training cycles for the free-weight back squat.

Prediction of One Repetition Maximum in Free-Weight Back Squat Using a Mixed Approach: The Combination of the Individual Load-Velocity Profile and Generalized Equations.

ABSTRACT: Fitas, A, Santos, P, Gomes, M, Pezarat-Correia, P, Schoenfeld, BJ, and Mendonca, GV. Prediction of one repetition maximum in free-weight back squat using a mixed approach: the combination of the individual load-velocity profile and generalized equations. J Strength Cond Res 38(2): 228-235, 2024-We aimed to develop a mixed methods approach for 1 repetition maximum (1RM) prediction based on the development of generalized equations and the individual load-velocity profile (LVP), and to explore the validity of such equations for 1RM prediction. Fifty-seven young men volunteered to participate. The submaximal load-velocity relationship was obtained for the free-weight parallel back squat. The estimated load at 0 velocity (LD0) was used as a single predictor, and in combination with the slope of the individual LVP, to develop equations predictive of 1RM. Prediction accuracy was determined through the mean absolute percent error and Bland-Altman plots. LD0 was predictive of 1RM ( p < 0.0001), explaining 70.2% of its variance. Adding the slope of the LVP to the model increased the prediction power of 1RM to 84.4% ( p < 0.0001). The absolute percent error between actual and predicted 1RM was lower for the predictions combining LD0 and slope (6.9 vs. 9.6%). The mean difference between actual and estimated 1RM was nearly zero and showed heteroscedasticity for the LD0 model, but not for the combined model. The limits of agreement error were of 31.9 and 23.5 kg for LD0 and LD0 combined with slope, respectively. In conclusion, the slope of the individual LVP adds predictive value to LD0 in 1RM estimation on a group level and avoids error trends in the estimation of 1RM over the entire spectrum of muscle strength. However, the use of mixed methods does not reach acceptable accuracy for 1RM prediction of the free-weight back squat on an individual basis.

Self-mutilation: a systematic review.

Self-mutilation lesions can represent a clinical diagnosis challenge for healthcare professionals, as patients do not admit to self-mutilation. This leads to failed diagnoses due to the similarity of this condition to other diseases. Searches on the subject were carried out at the PubMed, Periódicos Capes, Scopus, Science Direct and WoS databases, according to the following inclusion criteria: articles in English, Portuguese or Spanish, published from 2018 to June 2023, encompassing case reports, case series and literature reviews. Men are slight more affected by self-mutilation injuries, also presenting the most serious lesions. Self-mutilation injuries are reported globally, mostly in the Asian and American continents. Clinical presentations are varied, but morphology is, in most cases, associated to the form/instrument used for self-mutilation. Greater evidence of diagnosed mental disorders in women and underreporting of these cases in men due to low demands for specialized treatment are noted. A higher prevalence of self-mutilation lesions was verified for men, affecting a wide age range, with the highest number of cases in the USA. The most affected body areas are arms and external genitalia, mostly due to knife use. An association between self-mutilation injuries and mental disorders is clear, with most cases being previously undiagnosed.

Selective, broad-spectrum antiviral photodynamic disinfection with dicationic imidazolyl chlorin photosensitizers.

The COVID-19 pandemic exposes our vulnerability to viruses that acquire the ability to infect our cells. Classical disinfection methods are limited by toxicity. Existing medicines performed poorly against SARS-CoV-2 because of their specificity to targets in different organisms. We address the challenge of mitigating known and prospective viral infections with a new photosensitizer for antimicrobial photodynamic therapy (aPDT). Photodynamic inactivation is based on local oxidative stress, which is particularly damaging to enveloped viruses. We synthesized a cationic imidazolyl chlorin that reduced by > 99.999% of the percentage inhibition of amplification of SARS-CoV-2 collected from patients at 0.2 µM concentration and 4 J cm-2. Similar results were obtained in the prevention of infection of human ACE2-expressing HEK293T cells by a pseudotyped lentiviral vector exhibiting the S protein of SARS-CoV-2 at its surface. No toxicity to human epidermal keratinocytes (HaCaT) cells was found under similar conditions. aPDT with this chlorin offers fast and safe broad-spectrum photodisinfection and can be repeated with low risk of resistance.

Affective theory of mind in people with mild and moderate Alzheimer's disease.

OBJECTIVE: This study compared the affective theory of mind (ToM) of people with mild and moderate Alzheimer's disease (AD) and healthy older adults and also investigated the relationship between affective ToM and cognitive and clinical functioning in AD people. METHODS: This cross-sectional study included 156 older adults with AD and 40 healthy older adults. We used an experimental task involving reasoning processes in different contextual situations. RESULTS: The affective ToM was impaired in AD groups compared with healthy group, with moderate AD group showing lower performance than mild AD group. The affective ToM task of mild AD group was significantly correlated with the Mini-Mental State Examination (MMSE) and education years. Linear regression showed only education years as a predictor of ToM task performance. The neuropsychiatric symptoms and functionality were not correlated with the affective ToM. CONCLUSIONS: Our findings demonstrated that people with mild and moderate AD presented impairments in affective ToM that can be explained by the difficulties to infer emotion from reasoning processes. In addition, the education years variable proved to be an affective ToM performance's predictor for the mild AD group, but not for the moderate AD group, indicating that ToM abilities are affected differently in different stages of AD. Neuropsychiatric symptoms and functionality seem to have no influence on affective ToM impairments in people with AD.

Symptoms of oropharyngeal dysphagia, efficiency, and safety of swallowing in patients after treatment for head and neck cancer.

PURPOSE: The aim of this study is to investigate the relation between symptoms and signs of oropharyngeal dysphagia after treatment for head and neck cancer. METHODS: An observational analytical study with retrospective and prospective components was carried out including 25 adult and elderly patients with head and neck cancer who had completed the treatment at least 3 months before data collection. Data from the Eating Assessment Tool (EAT-10) protocol were analyzed, as well as from the videofluoroscopic swallowing exams. Based on videofluoroscopy, the degree of oropharyngeal dysphagia was classified, as well as the safety and efficiency grade using the DIGEST (Dynamic Imaging Grade of Swallowing Toxicity) scale. Pearson's correlation test was applied, adopting a significance level of 5%. RESULTS: There was a significant correlation between question 4 of the EAT-10 (swallowing solids takes extra effort) and the efficiency profile (p = 0.004), as well as between question 4 and the DIGEST score (p = 0.002). No significant relation was found between the DIGEST score and EAT-10 total score (p = 0.180) and not even between EAT-10 total score and efficiency (p = 0.129) or safety grade (p = 0.878). CONCLUSION: In conclusion, no relation was found between most of the dysphagia signs and symptoms investigated, demonstrating that the individual's perception of the swallowing function may not be consistent with the findings of the instrumental evaluation after long-term treatment for head and neck cancer.